Delivery from sales scheduling agreement with one item per schedule line

Hi all,
I have a sales scheduling agreement where the same part number has 3 different JIT schedule lines and I need to create a delivery with 3 item lines: every item line of the delivery has to be referred to one schedule line of the scheduling agreement.
When I create the delivery with transaction VL10E it has only one item line and its quantity is the sum of the 3 schedule lines of the sales scheduling agreement.
I've tried to change the customizing of the User Role, choosing the Split Schedule Line = 2 ("One item per schedule line") but the delivery is created again with only one item line.
How can I solve this issue?
Thanks in advance for reply

Dear Alex
The SAP standard behaviour is that all schedule items with delivery date in the past have to be rescheduled anyway to one date and are combined therefore.
Partially this behaviour can be influenced in VL10* by 2 parameters in
the user role : Split per sched.line and Rule (delivery qty).
Please find below informations about these different parameters
"Split per sched.line propose you 3 Rule for creating one delivery item
per schedule line. In a delivery list in item view with multiple
schedule lines, you can decide for the same document item whether you
want to generate one delivery item per schedule line or whether you want
to deliver the cumulated quantity of the last schedule lines selected.
About rule for delivery quantity, the following rules are currently
implemented:
1. No cumulation
The open schedule line quantity to be delivered is the quantity at which
the list line is delivered.
2. Sum of all open schedule line quantities to be delivered that fall
before the chronologically latest date in the to field (following the
Deliv. creation date field) of the selection criteria.
3. Sum of all open schedule line quantities to be delivered whose
delivery creation date falls within the selection time frame (between
the dates in the Deliv. creation date and to fields, respectively),
making the calculation of the quantity to be delivered consistent with
selection criteria. However, calculationof the quantities delivered with
the order's schedule line quantities is not affected."
Hope this helps.
Regards
Tonia

Similar Messages

Delivery item per schedule line

Hi all,
Thank you for viewing my posting, I have the requirement as following:
I have two SD schedule agreements, there are several schedule lines on JIT delivery Scheudle tab for each schedule agreement, these two schedule agreement are for same customer, have different material.
What I want is:
When I create delivery for these two schedule agreements in VL10A, these two schedule agreements are combined into one delivery note, but the delivery item per schedule line on the delivery note.
E.g.
one schedule agreement has 5 schedule lines
the other has 4 schedule lines
After I create delivery for these two delivery notes in VL10A, there should be 9 items on delivery notes, one item per schedule line.
Do you have idea on this? I do not want to combine several schedule line into one delivery item.
Thanks!
Alex Lu

Dear Alex,
You try these copy control settings between Scheduling agreement and delivery document.
Go to VTLA transaction select your document types
First you go header level settings here you can find the check box field called Copy item number check this then try.
If it is not full fill your requirement then go in to the item details here you can find the copying Routine maintenace field Item Data Under Data transfer Tab,this field will have 101 item Routine as per the standard,you take ABAPer help you copy this routine then change according to your requirement then assign new routine here.
I hope this will help you,
Regards,
Murali.

Scheduling agreements with delivery schedule - Deviation tolerance

Hi,
Within sales order document "Scheduling agreements with delivery schedule" (LZ) it is possible to enter deviation tolerances (e.g. deviation in quantity) manually for each single item line.
Does anybody know, if it is also possible to set up firm tolerance groups with assignment to customer / material, which are copied automatically into item lines of scheduling agreements?
Thank you for your assistance.
Best Regards,
Melanie

Hi,
It is obvious that, a schedule agreement needs to come with the fixed delivery qty and dates.
Pls explain your requirement in detail so that you will get a clear solution.
Rgds,
Sivarajesh. j

Scheduling agreements with delivery schedule - Copy control

Hi,
I wonder, if it would be possible / would make sense to specify for sales document type "LZ - Scheduling agreements with delivery schedule" a copy control for referenced documents like quotations.
Is there anybody who already has experience in that field?
Thank you in advance for your answers.
Best Regards,
Melanie

Hi,
It is obvious that, a schedule agreement needs to come with the fixed delivery qty and dates.
Pls explain your requirement in detail so that you will get a clear solution.
Rgds,
Sivarajesh. j

Closing of scheduling agreement with open quantity

In our scenario
When ever we receive the sales order,
we will convert it into scheduling agreement (VA31),
then converting them into planned orders through (MD02) & (MD16),
these are converted to PRu2019s and the procurement process continues and the material is taken into production through quality and after the processing of these materials to end products(FG).
These are taken into finished goods and we will create sales order (VA01) with reference to the scheduling agreement.
And with reference to the VA01 we make out bound delivery (VL01N) and
with reference to sch. Agreement we make billing document VF01 and create excise invoice for factory sale and send the goods to the customer
Now the problem is
When we receive sale order of 30,000 units and we will make sch. Agreement for 30,000 units.
But after planning, procurement and production we receive the FG of 29,500 only(as per yield 98%) into UR in stores.
Now we will supply the FG to customer through billing.
And now we will go to MD04 and check for the requirements the sale order sch. Agreement is still open and when we want to close that sch. Agreement to remove it from the requirements.
But the system is not allowing us to delete the sch. Agreement and giving a message no.V1748, which you cannot mark, deletion flag of xxxxx sch. Agreement.
We can only close it when we go back to initial sale order and change the quantity to 29,500 and coming back to sch agreement and changing the quantity to 29,500 and then only it is allowing us to mark delete.
Initially it is allowed but now it not allowing me to close without the reverse setting.
Kindly help me in this issue
mln raju

hi
In Scheduling Agreemnt you can maintain the Reason for rejection for closing the SA maintain it item level also by mentioning the reason for rejection and the quantities will not reflect in MD04
regards

Finding of materials in scheduling agreement with more than 150 lines

Dear Experts,
we are in need to find materials in scheduling agreement with more than 150 lines. In standard SAP, materials can be searched only based on item Nos. is there a way we can search by material in ME38. also we noticed that find icon is greyed out in ME38.
Please suggest.
One more request is, to create an uplaod program for maintaining delivery schedules for multiple SAs.
please sugegst if this is feasible.
Regards
Raghavendra MS
9886138875

I am also curious if anyone has found a solution to this problem.
We routinely have scheduling agreements that are hundreds of line items. Users find it difficult to find the line item they wish to work with. It would be helpful if we could search by material number or sort the line items by material.
As Raghavendra mentioned (ctrl+F) functionality is not available in ME33L or ME38.
Thanks.

Scheduling Agreement with Kanban

I was looking in to the forum and as per my understanding FRC and JIT schedule, On the days on which the next FRC date (1st. Monday in the month) or the next JIT date (Monday each week) is reached, scheduling agreements with the above profile settings are selected and SA releases (delivery schedules to be issued to the vendor) created (because the next creation date has been reached).
In my case I like to aggregate the requirment daily and send to the vendor end of everyday .What setting I need to do and what will be the process.I am using this functionality with KANBAN.
thanks in advance

Eduardo,
We already decided to use Kanban with Scheduling agreement. We have some MRO parts which we move from one Main storage location to another storage location in production area and once someone will scan the main storage location and if it hits the reorder point it will generate the external scheduling agreement to the vendor. If we have agreement for different parts with same vendor it will combine all the parts in one scheduling agreement and the other thing business want send these scheduling agreement to vendor on the same day not in 14 days or once in a week.
Please let me know how what I have to do to achieve this functionality and we are using LPA agreement.
Thanks

Procedure of scheduling agreement with jit

Can any one explain the step by step by procedure of creation of scheduling agreement with jit(just in time)
Vasu,K

Dear vasu,
The steps are
Step 1: Create Creation Profile in IMG under Scheduling agreement node
Step 2: Assign that creation profile to Material in the material master and the JIT indicator
Step 3: Ensure that creation profile copied to the SA, if not then assign it in the item detail
Step 4: Then run the Transaction for the delivery shedule creation
Ste 5: Check the shedule created
Thanks,
With regards,
Krishna Reddy

Delivery group 000 consists of only one item

Hi All,
I've the following issue(s):
Customer Master is set with "Complete delivery required by law" flag.
Partial Delivery per item = B.
Max. Partial deliveries = 1.
However, when I create an SO for this customer: then in the SO, the complete delivery flag is not set.
Also, i get the msg: "Delivery group 000 consists of only one item".
I checked the item category in VOV7, no delivery grp flag set.
Please help me with both issues.
Regards,
Raghu.

Dear,
For complete deliver select - C (Only complete delivery allowed),in customer master,
Then in sales order it will appear with tick mark, and when you creating delivery & if you change delivery quantity then system will popup dialog box, saying complete delivery required.
Delivery group (items are delivered together)
A combination of items that should be delivered together.
Use
The system uses delivery groups to check the availability of items that should be delivered together. The delivery date of the latest schedule line in the delivery group is taken as the general date for the whole group.
Procedure
During sales order processing, you can enter a number (up to three digits) that identifies a delivery group. The number is freely definable.
Regards,
kapil
Edited by: Kapildev Farakte on Nov 18, 2009 11:33 AM

Schedule agreement with STO.

Dear Guru's
Iam unable to get shipping tab in Schedule agreement with STO. Can any one help where I need to check?
Thanks with Regards,
Srikanthraj

Hi,
Please check the shipping assignments in the following configuration.
SPROMaterial managementPurchasingScheduling aggrementSet up stock transport scheduling aggrement--Define shipping data for plants.
Define Shipping Data for Plants
In this step, you maintain the shipping data for plants for stock transfer processing.
Here you maintain the customer number of the receiving plant. Thise customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if provision has been made in Customizing for a stock transfer to be carried out with an SD delivery (see Assign Delivery Type and Checking Rule).
You can also define the following for the supplying plant:
Sales organization
Distribution channel
Division
With this data, the system determines the shipping data for the material to be transferred (e.g. the shipping point).
Please check your settings in this step.
Regards,
Rambhupal reddy

Scheduling Agreement with LPA

Hi,
I am trying to generate schedule lines and release them to delivery schedules with doc type LPA.
I have done the settings in MRP2 view and done the settings in source list, info record and scheduling agreement.
I have created and Plnd Independent requirements in MD61 and executed the planning run in MD02 but unable to create schedule lines.
Could you please advise me if i am missing any settings or config's.
I wan to know how the zones work with LPA and how the whole cycle and the functions available with LPA.
Responses will be highly appreciated.
Regards,
Mittu G

hi
These are the Prerequisites befor you go on to SA with release
Scheduling agreement releases (FRC and JIT schedules) can only be generated for scheduling agreements with release documentation (in the standard system, document type LPA).
(In the standard system, the Release docu. indicator is selected for document type LPA in Customizing for Purchasing under
Scheduling Agreement -> Define Document Types.)·
If you wish to work with JIT delivery schedules, the JIT schedule indicator must be set in the material master record (Purchasing or MRP 2 view) and the Additional data of the scheduling agreement item.
You create SA releases by means of the Purchasing menu via
Scheduling agreement -> Create release
Choose release type ->FRC and JIT delivery schedulesSelect scheduling agreements - Specification of plant
Scope of selection- Changed or next date
Creation- According to strategy in profile, Tolerance check active
On the days on which the next FRC date (1st. Monday in the month) or the next JIT date (Monday each week) is reached, scheduling agreements with the above profile settings are selected and SA releases (delivery schedules to be issued to the vendor) created (because the next creation date has been reached).
Reward points if useful
Thanks & Regards
Kishore

Scheduling agreement- With Release

Dear All,
Can anybody give the steps for Scheduling agreement with Release documentation from SPRO settings and ME84.
Also Delivery schedule print settings with re to scheduling agreement also needed.
Regards

Hi
You can refer the below link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm

Error in modifying Schedule Agreement with reference to contract

I have created a Schedule Agreement with reference to a contract manually.The contract is of type MK, while the SA is of type LP.
The contract contains one Material which was successfully added to the SA.
Now I am trying to automate the same using BAPI BAPI_SAG_CHANGE. This causes a short dump in the system -
Runtime Errors       MOVE_CAST_ERROR
Exception              CX_SY_MOVE_CAST_ERROR
Short text              Dynamic type conflict when assigning references
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_MOVE_CAST_ERROR', was not caught in procedure "GET_CREQS" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: It was tried to assign a reference to a rereference variable using the
    'CAST' operation ('?=' or 'MOVE ?TO'). However, the current content of the source variable does not fit into the target variable.
    source type: "\FUNCTION-POOL=MEOUT \CLASS=LCL_OUT_ITEM_SA"
    target type: "\FUNCTION-POOL=MEOUT\CLASS=LCL_OUT_ITEM_CON"
Information on where terminated:
    Termination occurred in the ABAP program "SAPLMEOUT" - in "GET_CREQS". The main program was "RS_TESTFRAME_CALL". In the source code you have the termination point in line 105 of the (Include) program "LMEOUTP2F". The termination is caused because exception "CX_SY_MOVE_CAST_ERROR" occurred in procedure "GET_CREQS" "(METHOD)", but it was neither handled locally nor declared in the RAISING clause of its signature. The procedure is in program "SAPLMEOUT "; its source code begins in line 101 of the (Include program "LMEOUTP2F ".
The following data was populated before calling the BAPI:(along with itemx table also)
item-item_no
item-agreement
item-agmt_item
The entire logic consists of updating the contract first with a new line item and then adding a line item in SA with reference to the new item in the contract.
The contract updation is working correctly [BAPI_CONTRACT_CHANGE].

Hi Bahrat,
I am also facing the same issue now. Is this issue resolved for you?
Please send the threads if any.
Can anyone plz respond for the issue?

BAPI or FM to create outbound delivery from Sales order

Hello All,
My requirement is to create a outbound delivery from sales order. Also i need the batch number and texts to be updated in the delivery.
For this i need a single FM. The catch is that we don't have the batch number and texts in the sales order. That i have to take from some other delivery. I can get all the information .
The problem is that i can not find a FM through which i can create the delivery from the order and update the same.
I should not use two FM.
Could you please tell me some FM which does both in one go?
Thanks and Regards,
Rahul Sinha

Hi
Hi,
You can use the BAPI BAPI_DELIVERYPROCESSING_EXEC.
Check this sample code..
PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
INTO TABLE t_vbap
FROM vbap
WHERE vbeln = p_vbeln.
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
request = t_request
createditems = t_created
return = t_return
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
READ TABLE t_created INDEX 1.
Write: / 'Delivery ', t_created-document_numb.
Regards,
Sreeram

Scheduling agreement with relase - doc type LPA with JIT

Hi
can any one give the steps for Scheduling agreement with relase - doc type LPA with JIT process.. and explain how the JIT will work in SA.
Pls advise what are config required and what the user tcode needed to perform the SA with JIT concept.

Dear Friend,
Without release documentation(Document type LP)
The delivery schedule lines have official character-that is to say,they are transmitted to the vendor as they are saved in the system.The system does not document in detail releases aganist the scheduling agreement that have been sent to the vendor.Therefore,in the case of the document type without release documentation,the message control facility should be set up in such a way that a message is immediately sent to vendor if any changes are made to the delivey schedule stored in the system.
With release documnetation(Document type LPA)
If you use scheduling agreement with release documentation,the delivery schedule lines are not transmitted directly to the vendor.Intially ,the lines of the delivery schedule stored in the system for an LPA scheduling agreement for an internal information only.A message informing the vendor of your material requirements cannot be transmitted to the vendor until you explicitly create an SA release,that is forecast (FRC) or Just in Time(JIT) delivey schedule.Through this process,you can change the way schedule lines are represented.With release documentation,you can disply the SA releases(delivery schedules) transmitted to a vendor over a certain period of any time.This enables you to trace precisely when you sent which information to vendor.
Regards
Pramod

Delivery from sales scheduling agreement with one item per schedule line

Similar Messages

Maybe you are looking for