Delivery header billing status is different from any of items.

Dear Friends ,
               I have a peculiar case . There is a delivery document which is usually not relevant for billing . Each of the items in the delivery is showing billing status as 'blank' which means not releavant for billing . The item category also not relevant for billing . But at the header level , billing status is showing as 'A' , not yet processed .
could somebody explain what could be causing this ?
Thanks and Regards
Raghav.

Hi Raghav
This could be because in your  delivery document  , some line items may not be relevant for billing and some line items might be relevant for billing  and that is the reason at header level , it is showing that billing status is not yet processed (A)
So check the item category for each line item (relevant for billing or not)
Regards
Srinath

Similar Messages

  • Incorrect Delivery Header Packing Status

    Dear Experts,
    We did not expect the delivery header level Packing Status to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed.
    Delivery Header Packing Status VBUK- KOSTK = C  when the first item of the delivery is packed while there are many itmes to be still packed
    Any valuable input on this will be appreciated.
    Regards,
    Shashidhar

    Hi Shashidar,
    Please check the customizing for item cat. ZELN for example
    > Logistics Execution
    > Shipping
      > Packing
       > Packing Control By Item Category
        > Item cat.ZELN  : ' '  Can be packed        <<<<<
                            A   Must be packed
                            B   Cannot be packed
    Please change to  'A'  (Must be packed) and try again.
    regards,
    Ramana

  • Can Billing Quantity be Different from Order Quantity in Order Related Bill

    Hi
    I have encountered a scenario here at my client.
    My client wants that the billing document should be created with reference to Sales Order but only that value of invoice should be relseased to accounting which is delivered.
    For example,
    Sales Order = 10 units
    Billing Document= 10 units
    Delivery = 5 Units
    Released to Accounting Value = Eqvalent to 5 Units which are delivered.
    Reason why Sales Order and Billing should be of same quantity is that when a customer asks for an order confirmation, he requires Billing document for legal purposes but they want to hit their G/L's only on the basis of Quantity Delivered. As they are not aware when the customer come back to pick his remaining quantity. So they do not want to hit their accounting based on Sales Order quantity.   
    Any ideas?

    Hi,
    If billing has to be posted only after delivery, it is a clear case of Delivery related Billing. It is not order related billing.
    You SHOULD have the following scenarios here.
    Have a normal order and have  Proforma invoice linked to it with the condition that the quantity in proforma invoice should be the same as order.
    However do the actual invoice after doing delivery for the order. In this case, the posting will be only for the quantity delivered. You can change the quantity in proforma invoice when you are creating the same from order. So that reqmt is also taken care of.
    I dont think of any other scenario where you can meet both reqmts.
    Hope this helps

  • Delivery number range taken is different from customizing delivery type

    Folks,
    I have the following situation:
    Delivery type has number range 17/18 which is SAP standard. During creation of deliveries, system take a different number range, i.e. a not SAP standard. Where else then in the delivery can we influence the number range determination?
    Thanks.
    MdZ

    The normal behaviour is that in VN01, you would be maintaining the number ranges for all SD documents and assign the serial number in the respective documents.  In your case, for delivery, in OVLK, for your delivery document type, the number should have been assigned.
    In case you have assigned but still, system is not considering that, then user exit would have been applied.
    thanks
    G. Lakshmipathi

  • I am so disappointed that with the new IOS7 I have lost my yellow note pad that was different from any other harsh white background that gives me headaches...please tell me that I can go back to what I was comfortable with?

    Is anyone else feeling the same way....why did you fix something that wasn't broken? I purchased an expensive ipad and liked the features, with one click I accepted the IOS7 operating system, not being informed of what I would lose, if I chose to upgrade...I was only informed about those things that would work better...not impressed with the new floating look to the screen, makes me feel light headed, bringing on a migraine...anyone else having problems with the new system?

    Agree, the new notes is useless. If I wanted a blank background, with a washed out looking font I would use my email, except the font in my email is dark enough to read easily in the grocery.
    Interesting to note how awkward the top menu is in iOS7 on a message board, it constantly drops down when selecting text.

  • How is the RJ-11 cable included with my VersaLink 7500 different from any other RJ-11 phone cable?

    One end is labeled To Wall (DSL jack, I presume) and the other is labled with a diagram of the RJ-11 input connector on the Modem/Router.
    Otherwise is looks like a normal telephone cable.

    One end is labeled To Wall (DSL jack, I presume) and the other is labled with a diagram of the RJ-11 input connector on the Modem/Router.
    Otherwise is looks like a normal telephone cable.

  • How to change Billing status of delivery-related billing documents?

    Hi Experts,
    Now I meet with the problem with the billing status.
    I want to create a billing reference delivery notes, but the billing staus of delivery-related billing docuemnts is  blank, I want to chage it to 'A' so as to create a billing refer to it.
    Can anyone give me some hint to make it true?
    Thanks a lot.
    Best regards,
    Chris Gu

    Hi,
    Billing status blank means, delivery is not relevent for billing. Check the deliver document, whether it has billing relevant items in it or not. To know the billing relevence, please check your item category definition.
    For delivery relevant billing, billing relevance in item category definition (VOV7 transaction) should be 'A'.
    A: Delivery-related billing document
    Billing is based on the outbound delivery. Billing status is only updated in the outbound delivery.
    Regards,
    Satya.

  • Does pricing type have any effect in Delivery to billing copy controls

    Hi,
    Does pricing have any effect on delivery to billing copy controls, for example pricing type, since there is no pricing related data in delivery.
    iF the billing is maintained as delivery related billing, will pricing type has any effect.
    Thanks
    Keshi

    Yaa, It is a good question.
    If the billing is maintained as delivery related, its all about the qty of the material to be billed after delivery. (setting maintained at VOV7).
    Even though the delivery doesnt have any pricing relevant data, the pricing type has an important effect.
    Of course it is maintained at delivery to billing copy control, but u have to see where u are finding the pricing type field. It is in the copy control item level for TAN. So it is not relevant to the delivery transaction any more, it is relevant to the item category only.
    So the conclusion here is if the item category is relevant for billing transaction, after delivering the item, how the pricing is carried out during the billing (whether the same pricing or diff. pricing). This is explained by the pricing type field.
    Hope i answers ur query. if u have any further queries, please post.
    Do reward points if it is useful.

  • Sale order delivery and billing blocked

    Hi sap sd gurus
    I have a problem after creating a sale order , the one line item in sale order showing status of delivery blocked and billing blocked , now i am unable to post delivery and billing when i see in schedule line item order qty and confirmed qty .
    Now i want to find why this is blocked and remedy for removing this block .
    Could anyone suggest me in this issue asap
    thanks in advance
    Kanna

    Dear Kanna,
    Go to XD02 at the toppage you will find Extras
    In that Extra Topage  you will find a field   Blocking Data.
    Check whether Order block and Delivery Block has been ticked.
    If ticked is there remove the tick and try Delivery and Billing.
    If you have any concerns revert back the same to me
    With Regards,
    Amjath

  • Delivery Related Billing in CRM

    Hi,
    I have created a sales order into CRM & same document replicates into ECC. From ECC sales order I can create delivery.
    But I require Billing to be occured into CRM System.
    Kindly tell what settings are requiredin CRM.
    Thanks
    Natasha

    Hi Natasha,
    Make sure that you have made the following settings in Customizing for Customer Relationship Management:
    You have set the billing relevance Delivery-Related Billing or Delivery-Related Billing – No Zero Quantities for the relevant item category.
      You do this by choosing Billing Define Billing Relevance of Item Categories .  
    The billing-relevance Q is set for the corresponding item category in SAP ERP. This ensures the following:
    Billing takes place in SAP CRM and not SAP ERP.
    After billing, the status of the delivery item in SAP ERP is set to Billed and the billing document item is included in the document flow for the delivery item.
    You have specified that the billing item category assigned to the sales order is a dependent item. This ensures that the billing due list item created for the sales order cannot be billed independent of the delivery.
      You make this setting by choosing Billing Define Billing Item Categories and setting the Dependent Item indicator for the relevant billing item category.  
    Example
    In the standard system, the billing item category TAND is predefined for delivery-related billing. It can be assigned to transaction type TA (Sales Order) and the item category TAN (Sales Item) under Billing Item Category Determination Assign Item Categories .
    End of the example.
    You have assigned a separate billing item category to the transaction type and item category that are used for the delivery. This enables the system to assign the correct billing type and billing item category to the billing due list item for the delivery.
    Example
    The billing item category TAN is predefined in the standard system. It can be assigned to transaction type LF (Outbound Delivery) and the item category TAN (Sales Item) under Billing Item Category Determination Assign Item Categories .
    Process
    The flow of data in delivery-related billing is:
    A user creates a sales order in SAP CRM.
    The system replicates the sales order in SAP ERP.
    The system creates a dependent item in the billing due list, containing billing information from the sales order.
    A user creates a delivery in SAP ERP.
    The system updates the delivery status in the SAP CRM sales order, and updates the transaction history.
    A user posts a goods issue in SAP ERP.
    This works well . Give me some stars for the solution
    Regards
    Bhanu Singh

  • Where we can found  sales order billing status

    Hi guru's
    where we can found  sales order billing status?
    suppose if i created one sales order that sales order related billing status i want to let to know
    where can i found that one.

    Hi upendra_sap
          Go to the menu in VA02, VA03 goto >header>status, there you can see the header billing status and also item billing status.
          In table VBUK (header status) field FKSTK, and in VBUP (item status) FKSAA (Billing Status for Order-Related Billing Documents) or  FKSTA (Billing status of delivery-related billing documents).
    Thanks,
    Mariano.

  • Anyone knows the difference between this Protocol Encryption status or why there status are different?

    I am confused why there Protocol Encryption Status are different from each other they are all using AnyConnect client v2.5.
    user 1 - AnyConnect-Parent SSL-Tunnel RC4
    user  2 - AnyConnect-Parent SSL-Tunnel DTLS-Tunnel RC4 AES128
    user  3 - Clientless SSL-Tunnel DTLS-Tunnel (this user is using an AnyConnect client, but when she connects her status show Clientless)

    The 17" MBP has an extra USB 2.0 port and also comes with a FireWire 800 port.
    As far as the GPUs go, they are the same: ATi Mobility Radeon X1600.
    As far as the GPU-dedicated-RAM (VRAM) goes, the only difference is the amount (128MB vs 256MB). More VRAM is better if you are going to be running video intensive apps, eg. multimedia apps and/or 3D games. The VRAM is GDDR3 which provides greater bandwidth than the DDR2 technology used in the 512MB/1GB/2GB of 'main memory'.
    There is, of course, the different CPU multipliers. The 1.83GHz has an 11x multiplier while the 2.00GHz has a 12x multiplier. The 2.16GHz CPU of the 17" MBP has a 13x CPU multiplier.
    The Front Side Bus speed is the same 667MHz on all three models. It drops down to 167MHz at the boundary of the CPU to which is applied the above multipliers, ie:
    667MHz FSB / 4 = 167MHz
    167MHz x 11 = 1.83GHz
    167MHz x 12 = 2.00GHz
    167MHz x 13 = 2.16GHz
    N.B. 167MHz is really 1000/6.

  • SO created delivery and billing blocked

    Hi sap sd gurus
    I have a problem after creating a sale order , the one line item in sale order showing status of delivery blocked and billing blocked , now i am unable to post delivery and billing when i see in schedule line item order qty and confirmed qty is present.
    Now i want to find why this is blocked and remedy for removing this block .
    Could anyone suggest me in this issue asap
    thanks in advance
    Kanna

    Hi,
    In shcedule lines VOV6 you have maintained  delviery block that might be one of the reason to get item blocked for delviery...
    And also some body might set delivery and billing block manually at item level so please also look at change log of that document...
    Please go to VA02 and there at schedule lines data of item level there u just reomove the deliver block manually and then save the order and also at item level in billing tabage please remove billing block manually...
    Then  try to create delveiry and billing...
    Regards
    sankar
    Edited by: sankar sankar on Jul 9, 2008 3:00 PM
    Edited by: sankar sankar on Jul 9, 2008 3:03 PM

  • Whast is order related billing and delivery related billing?

    Explain about order related billing and delivery related billing
    thanks

    hi,
    just to add,
    In Customizing for the item category at VOV7, you can determine the basis for billing using the indicator <b>Billing relevance</b>.
    This allows you to carry out the following controls:
    A: Relevant for delivery-related billing documents
    Outbound delivery is the basis for billing. The billing document status is only updated in the outbound delivery.
    B: Relevant for order-related billing documents
    The sales document is the basis for billing. The billing status is defined by the required quantity.
    In the standard system the item categories REN (returns) and BVN (cash sales) are set up in this way.
    So depending upon the billing documents configured to the sales document for order and delivery related billing, would be triggered based on the item category setting for billing relevance.
    Pl reward if it helps.
    Thanks
    Sadhu Kishore

  • Link between Delivery Header & Sales Order Item for extraction to 2nd level

    Hi Guys ,
    I am having a requirement that need to pull the following data to 2nd level DSO
    1.  Delivery Header Data
    2. Sales Order Item data. ( Sales Document, Item, Item RDD, Material)
    So I am planning create a 2nd level DSO on top of Delivery header and need to pull the sales order ITEM level data ( Sales document , Order ITEM, ITEM RDD date , Material)  through start routine u2026
    How can I pull the Sales Order Item data through start routine?  i.e I need the link between Delivery Header & Sales Order Item Data .
    or I need the link between LIKP ( Delivery Header) Vs VBAP ( Sales Document Item).
    Thanks
    Edited by: krismady on Sep 22, 2010 2:26 AM
    or I need the link between LIKP ( Delivery Header) Vs VBAP ( Sales Document Item).

    Hi Krish,
    You can use VBLEN (Sales Document) to link Delivery header DS (2LIS_12_VCHDR) and Delivery item DS (2LIS_12_VCITM). Now In delivery item DS (2LIS_12_VCITM) you have VGBEL (Reference doc.) and VGPOS (Reference item) which is nothing but sales order document number and sales item in Order item DS (2LIS_11_VAITM) .
    So you need to link in above way to get other values in your DSO.
    It is proven method.
    Thanks,
    Uday Shankar.

Maybe you are looking for