Delivery in Make to Order situation for BOM Material
Hi,
I have the BOM material which is exploreing in the sales order 11005 as
follows -
LineItem Railing 10 (Top Material)
01 A01 10
02 A02 10 (Sub items)
03 A03 10
04 A04 10
05 A05 10
At the time of sales order level, we are sending the requirements to
PPC for the top material Railing, at the time produciton stage PP run
the MRP and do the production for Sub items A01 to A05. When doing the
production confirmation for A01 to A05 materials, system is confirming
the stock against the sales order number 11005 with item no 01.
In our business purpose we are maintaining the stock for top material
and also sub itmes because of Excise purpose. For Top material we are
uploading stock manually with MB1C with Special Stock E and in PPC
doing the produciton of sub items.
At the time of crating the delivery system is not checking stock of sub
items and its showing the stock as 0 because the proudction is
confirmed at line item 10 for sub items a01 to a05.
Reply ASAP
Regards
Goutham
+919891936656
Hi Friends,
Can you please provide the solution for my problem and its slight urgent.
Regards
Goutham
Similar Messages
-
Unable to enter multiple Schedule lines for BOM material in Sales Order
Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
SamikshHi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva -
Make-To-Order Production for Service Products
Hi All,
has anyone some experience with SAP R/3 (SD, CS, MM, FI,CO) Make-To-Order Production for Service Products?
Does the Make-To-Order Production Scenarion work for Service Products?
Is there any documentation about Make-To-Order Production Scenarion for Service Products?
Regards
KlausIt works using transaction OSID to define service products and using requirements class and type to control the creation of service orders or projects for sales document items. All business services can be implemented using these service products.
We have inplemented Customer Center Solution based on this approch for a Atlas Copco (http://www.atlascopco.com/us) with cutomer center in more tham 70 countries.
They make, sell, rent, finance and service
Construction and Mining
Compressors and Generators
Industrial tools
Regards
Klaus -
Userexit to update sales order no for packaging material during PGI
Hi,
Scenario is like this:-
1.Sales order will be created for material X
2.Delivery will take place and packaging of material X will take place.
3.The packaging material will come as a line item and we do PGI by picking the quantity.
4.Now when we see the accounting document for PGI,we get the sales order reference for X.
5.We are not getting the reference of Sales order no for packing material while seeing the accounting document in PGI.
6.Since the packing material is not maintained in Sales order thats why the sales order no is not getting updated in the accounting document.
7.NOW I WANT TO UPDATE THE SALES ORDER FIELD FOR PACKING MATERIAL ALSO ONCE THE PGI IS TAKING PLACE.
Can any one suggest me if there is any userexit to update the sales order field for accounting document of packing material once PGI happens.
regards
SomnathHi,
Since packging material is not sales order item so it can't be accounted in PGI packging material is aour internal stock and not sellable stock.
Reward points if helps.
Thanks & Regards
Sasikanth.Ch -
hai i am new to sap , can any one tell me how to post free good for bom material !!
Hi,
Being a new member, one quick advice would be to search SDN and related forums before posting a new question, since this issue has been discussed many times.
To answer your question, Free Goods does not support BOM.
Please check [here|http://help.sap.com/saphelp_46c/helpdata/en/dd/55fa34545a11d1a7020000e829fd11/frameset.htm] for detailed explanation.
Regards,
Amit -
ABAP Code to get Production Order Quantity for a material-Status REL,CRTD
hi all,
I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do.
IF t_mat[] IS NOT INITIAL.
t_mat2[] = t_mat[].
SORT t_mat2 BY matnr.
DELETE ADJACENT DUPLICATES FROM t_mat2 COMPARING matnr werks.
SELECT auaufnr afgamng af~plnbez INTO CORRESPONDING FIELDS OF
TABLE t_ord1 FROM afko AS af INNER JOIN aufk AS au ON
afaufnr = auaufnr
FOR ALL ENTRIES IN t_mat2
WHERE af~plnbez = t_mat2-matnr
AND au~werks = t_mat2-werks
AND af~gltrs IN s_gltrs
AND af~gstri IN s_gstri
AND au~phas0 IN s_phas0
AND au~phas1 IN s_phas1.
ENDIF.
Thanks. Regards.
SandeepHi
There is one std tcode COOIS where u can get the information what u have asked
Pls check
regards
Vijay -
Make-To-Order MRP for components with unstricted-use stock
Dear Experts,
There is a finished goods of material with standard planning strategy group "20" in the material master.
There is a component e.g. material A, under the BOM of the FG material.
There is already enough unrestricted stock for material A which has no special stock indicator assigned.
After creating the sales order, I use MD50 to run the make-to-order MRP, but the result shows that there a purchase requisition has been generated for the material A with the sales order assigned and specail stock indicator = "E".
Is there any solution so that there will be no PR generated for mat A as there is enough unrestricted-use stock.
And in the production order of the FG, can the component only requires the unstricted-use stock instead of the "E" stock?
(It is ok for the FG goods receipt as "E" stock.)
Thanks a lot.Hi Ram,
Thanks for your information.
I set the indi/coll = 2 and null for the strategy for the component material A
Just want to know, which strategy should I use for the finished goods? And any other setting for the finished goods and the component?
And which transaction MD02 or MD50 for the planning run for the finished goods?
In such setting, after the planning run , PR will be generated for the net external procurement?
Actaully my situation is that I just keep own stock for components, I want MRP to consider the own stock instead of sales order stock before generating PR.
Thanks for your help again.
Claude -
Make-to-order: COPS for KMAT materials (Non-valuated sales stock)
Hello,
We are working with KMAT configurable material (i.e. non valuated sales order stock).
The client is requiring that inventory of these KMAT material should be shown in the financial accounting;however as we work with KMAT, this seems not possible.
The whole process is:
- taking of the sales order with the configuration
- MRP and Production order Execution
- Settlement of the PO to the sales order
- Settlement of the Sales orden to a given account in FI (just like "stock for customer order") - inventory.
The problem we are facing now is how to make the compensation of this account once the product is delivered.
It seems the sales order's default settlement receiver is only the PSG. can we have to use the result analysis key to calculate the cost of sales, and which valuation method can we use if I only want to settle the actual cost that settled from the production order.
By the way, I have search for the notes:Note 26459 it seems we have to run the sales cost estimate first for the KMAT.
Summary
Symptom
It is not possible to perform results analysis on sales order items with materials of material type KMAT.
Additional key words
Transactions KKA3, KKAK
Cause and prerequisites
In make-to-order production, the inventory and the cost of sales are not posted through goods movements because the materials are managed in a non-valuated sales order stock. The only way to create postings in FI is to use results analysis (see Note 26456). If the sales order item consists of a material of material type KMAT, results analysis is not possible because no cost estimate exists for this material.
Solution
Results analysis must be performed with a valuation method that uses profit basis C. With this profit basis, the system uses the planned costs of the production orders for the sales order instead of a cost estimate for the KMAT material.
In Release 2.2 a modification is needed for this which is described in Note 25772. In Release 3.0 this function is provided as standard.
From 3.0C onwards the planned costs of the sales order can also be calculated in a product cost estimate for the sales order. You should use profit basis E in this case.
However, if you are using assembly processing with production orders, you can only use profit basis C.
Hope the scenario is clear. Perhaps you have a different approach to work with KMAT materials.
RegardsHi Friends,
Can you please provide the solution for my problem and its slight urgent.
Regards
Goutham -
RISING PURCHASE ORDER ONLY FOR BOM COMPONENTS
Hi Guys,
My client want, system should allow to create Purchase order for the material which are used as a component of a BOM. For other material system should not allow to create purchase order.
How can we meet this requirment.
Thanks
DhanuHi,
Maintain the Plant-Specific Material Status as 01 at Purchasing view of the MMR for all other materials which are not defined as a BOM component.
Regards
Merwyn -
Hi All,
I like to know what are the Scenario for Make to Order Process in MM. Which as to be taken care for the business process in India. If listed out with the flow it will be of great help.
sapuserHai..
Make to order is a production planning strategy.
Make to order normally flows in the below mentioned path.
1) Requirement of FG arises from Sales
2) Sales order will be generated against requirement
3) When MRP runs for the plant, by considering sales order, MRP element will be triggering PR / SA / Planned Order depending upon the settings in material master & other associated records.
4) If planned order has got converted to PR, then subsequently PO can be converted from PR.
5) After that you will be following normal procurement processes as you mentioned like,
Procurement of Stock Material, Procurement with Contract, etc..
Hope it will helps you...
Regards,
Kumar -
Purchase Order With Sub Item Component List for BOM material..??
Hi MM Experts,
We want to create PO with a component list that should be appears under the main item.
The component list is a mterial BOM.
Ex:- bom MATERIAL - CATALOG1 (Non Stock Materials)
COMPONENT 1 :-ABCD
COMPONENT 2 :- XYZ.
WHEN I ENTER THE BOM MATERIAL:- CATALOG1 IN /ME21N . Higher-Level Item-
Automatically botom line should be appear component 1 , 2 as a Sub Item.
how to configur this issue..?? Its a standard Ponot Subcontract
Thanks,
NAR.Hi!
If you have correctly maintained the BOM in CS01, make sure that in ME21N you enter "L" as the item category, and then, in the field "material", enter the finished product (the header material in your BOM). Then, enter all other required fields.
When all mandatory data has been completed in ME21N, go to the "Material Data" tab. Here you will see an icon named "Components". If you click this icon, the materials in your BOM will be listed here.
So, please, do not expect the BOM to be displayed with mother and daugther segments in the item overview of ME21N. Instead, consider that you will only be able to see the components if you click the "Components" icon under the "Material Data" tab at item detail level.
I hope this helps!
Esther. -
Two order Types for a Material
Dear Friends
For a material X, I have two BOMs with usage 1 & usage9 . When I make order with zlo1, the BOM with usage 1 is loaded in production order. When I create a production order with order type zro1, the BOM with usage 9 is loaded in production order.
But both the production order types come in MD04 screen.
But I want production order with zlo1 will appear to some ids and order with order type zr01 will come to some other ids. Is that possible??
Thanks
sangeetaHello,
You have to check the order type dependent parameters, production scheduler, production scheduling profile and in the material master work scheduling view which production sheduling profile you have used. The base concept of your query is order types picks mainly from the work scheduling view, according to the prod scheduler and profile, the same will be defined in the transaction OPKP there you will assign this and you have to check at the ultimate down side which order types you have permitted for this profile, kindly check at the bottom most what are the order types you have assigned.
Hope if you verify all these your problem will be solved.If you still have any queries Please revert back. -
How to get the open order quantity for a material
Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
AND VAPMA~WERKS = IT_OUTPUT-WERKS
AND VBAK~AUART IN S_AUART
AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.This could help.
*& Report: zsdvr055 date written: 03/24/00 *
*& Author: Brian Huntley last update: 03/24/00 *
*& Program Title: Open Order Report *
*& Description: This report will create a list of sales documents *
*& that are open (contain at least one item that is not shipped). *
*& The report will sort by ship-to customer name and by sales *
*& document number. *
*& Tables: *
*& Files: *
*& Transactions: *
*& Changes: *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
VBAP,
VBUP,
VBAK,
VBKD,
KNA1,
VBEP,
VBFA,
LIKP,
LIPS,
EKET,
T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
VBELN LIKE VBPA-VBELN, "sales document
POSNR LIKE VBPA-POSNR, "item number
PARVW LIKE VBPA-PARVW, "partner function
KUNNR LIKE VBPA-KUNNR, "customer number
END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
VBELN LIKE VBPA-VBELN, "sales document
END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
MATNR LIKE VBAP-MATNR, "material
ARKTX LIKE VBAP-ARKTX, "description
PSTYV LIKE VBAP-PSTYV, "item category
KDMAT LIKE VBAP-KDMAT, "customer material
NETWR LIKE VBAP-NETWR, "net value
WAERK LIKE VBAP-WAERK, "currency
KWMENG LIKE VBAP-KWMENG, "quantity
ERDAT LIKE VBAP-ERDAT, "entry date
NETPR LIKE VBAP-NETPR, "net price
KPEIN LIKE VBAP-KPEIN, "pricing unit
PRCTR LIKE VBAP-PRCTR, "profit center
ERNAM LIKE VBAK-ERNAM, "entered by
AUART LIKE VBAK-AUART, "order type
VKORG LIKE VBAK-VKORG, "sales organization
VTWEG LIKE VBAK-VTWEG, "distribution channel
VDATU LIKE VBAK-VDATU, "requested date (header)
BNAME LIKE VBAK-BNAME, "name of orderer
KUNNR LIKE VBAK-KUNNR, "sold-to customer
BZIRK LIKE VBKD-BZIRK, "sales district
KURSK LIKE VBKD-KURSK, "conversion rate
BSTKD LIKE VBKD-BSTKD, "customer PO
LFGSA LIKE VBUP-LFGSA, "overall delivery status
FKSAA LIKE VBUP-FKSAA, "overall billing status
KUNWE LIKE VBPA-KUNNR, "ship-to customer
NAME1 LIKE KNA1-NAME1, "ship-to customer name
ORT01 LIKE KNA1-ORT01, "ship-to address
REGIO LIKE KNA1-REGIO, "ship-to region (state)
LAND1 LIKE KNA1-LAND1, "ship-to country
END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
KUNNR LIKE VBAK-KUNNR, "sold-to customer
KUNWE LIKE VBPA-KUNNR, "ship-to customer
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ZDATE1 LIKE VBEP-EDATU, "requested date
ZDATE2 LIKE VBEP-EDATU, "scheduled date (confirm)
ZDATE3 LIKE VBEP-EDATU, "committed date
ZQTY1 LIKE VBAP-KWMENG, "qty ordered
ZQTY2 LIKE VBEP-BMENG, "backlog qty
ZEXTD LIKE VBAP-NETWR, "backlog net value
ZDESC(30) TYPE C, "backlog description
END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
WADAT LIKE VBEP-WADAT, "planned goods issue date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
BMENG LIKE VBEP-BMENG, "qty confirmed
END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ROMS1 LIKE VBEP-WMENG, "committed qty
END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
VGBEL LIKE LIPS-VGBEL, "sales document
VGPOS LIKE LIPS-VGPOS, "sales document item
VBELN LIKE LIKP-VBELN, "delivery number
POSNR LIKE LIPS-POSNR, "delivery item number
WADAT LIKE LIKP-WADAT, "planned GI date
WADAT_IST LIKE LIKP-WADAT_IST, "actual GI date
LFIMG LIKE LIPS-LFIMG, "actual qty delivered
ERDAT LIKE LIKP-ERDAT, "date created
ERZET LIKE LIKP-ERZET, "time created
END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
VBELV LIKE VBFA-VBELV, "sales document
POSNV LIKE VBFA-POSNV, "sales document item
VBELN LIKE VBFA-VBELN, "delivery number
POSNN LIKE VBFA-POSNN, "delivery item
VBTYP_N LIKE VBFA-VBTYP_N, "document category
RFMNG LIKE VBFA-RFMNG, "qty delivered
PLMIN LIKE VBFA-PLMIN, "plus/minus flag
END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG, "order qty
CONF_QTY LIKE VBEP-BMENG, "confirmed qty
NOCONF_QTY LIKE VBEP-BMENG, "qty not confirmed
DELV_QTY LIKE VBEP-WMENG, "qty delivered
NODELV_QTY LIKE VBEP-WMENG, "qty not delivered
REMAIN_QTY LIKE VBEP-WMENG, "qty remain to get conf date
REQ_DATE LIKE VBEP-EDATU, "request date
COM_DATE LIKE VBEP-EDATU, "committed date
DELV_QTY1 LIKE VBEP-WMENG, "preceding delivery qty
REMAIN_QTY1 LIKE VBEP-WMENG, "qty remain to get reqest date
REMAIN_QTY2 LIKE VBEP-WMENG, "qty remain to get commit date
THIRD_QTY LIKE VBEP-WMENG, "3rd party no PO qty
SO_STOCK LIKE MSKA-KALAB, "sales order stock
ZPRICE LIKE VBAP-NETPR, "unit price USD
ADRS1(40) TYPE C, "concatenated city and region
ADRS2(45) TYPE C, "city, region and country
ADRS3(80) TYPE C, "name, city, rgn, ctry
ZCNTR TYPE I. "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA INTO TABLE TVBPA
WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA APPENDING TABLE TVBPA
WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
CLEAR ITAB0.
MOVE TVBPA-VBELN TO ITAB0-VBELN.
APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
VBUP~POSNR = VBAP~POSNR
INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
VBKD~POSNR = VBAP~POSNR
INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
IF NOT S_KUNWE IS INITIAL.
CLEAR TVBPA.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = ITAB-POSNR PARVW = 'WE'.
IF SY-SUBRC <> 0.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = '000000' PARVW = 'WE'.
ENDIF.
MOVE TVBPA-KUNNR TO ITAB-KUNWE.
ELSE.
CLEAR ITAB-KUNWE.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
PARVW = 'WE'.
IF SY-SUBRC <> 0.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
PARVW = 'WE'.
ENDIF.
ENDIF.
IF NOT ITAB-KUNWE IN S_KUNWE.
DELETE ITAB.
CONTINUE.
ENDIF.
get ship-to customer address info
SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
WHERE KUNNR = ITAB-KUNWE.
MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
IF ITAB-LFGSA = 'A'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select schedule lines for SO item and write to internal table itab2a
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2A BY WADAT.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
LOOP AT ITAB2A.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
LOOP AT ITAB2A WHERE BMENG <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDLOOP.
get request date for SO item
IF NOCONF_QTY <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NOCONF_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NOCONF_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NOCONF_QTY.
ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
LIKP-ERDAT, LIKP-ERZET)
WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
CLEAR LIPS.
SELECT POSNR VGBEL VGPOS LFIMG
FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
CLEAR VBUP.
SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
IF VBUP-WBSTA = 'A'.
CLEAR ITAB3.
ITAB3-VGBEL = LIPS-VGBEL.
ITAB3-VGPOS = LIPS-VGPOS.
ITAB3-VBELN = LIKP-VBELN.
ITAB3-POSNR = LIPS-POSNR.
ITAB3-WADAT = LIKP-WADAT.
ITAB3-WADAT_IST = LIKP-WADAT_IST.
ITAB3-LFIMG = LIPS-LFIMG.
ITAB3-ERDAT = LIKP-ERDAT.
ITAB3-ERZET = LIKP-ERZET.
APPEND ITAB3.
ENDIF.
ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
IF SY-SUBRC <> 0.
IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
DELV_QTY1 = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
CLEAR LIKP.
SELECT SINGLE ERDAT ERZET
FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
WHERE VBELN = ITAB4-VBELN.
IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
AND LIKP-ERZET < ITAB3-ERZET ).
DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
get request dates for SO item
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to itab2c
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
REMAIN_QTY1 = DELV_QTY1.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
REMAIN_QTY2 = DELV_QTY1.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
IF ITAB3-WADAT <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB3-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue'.
ELSE.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue date'.
ENDIF.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
IF ITAB-LFGSA = 'B'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
select schedule lines for SO item and write to internal table
REFRESH ITAB2A.
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY1 = DELV_QTY.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY2 = DELV_QTY.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
LOOP AT ITAB2A.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
REMAIN_QTY = DELV_QTY.
LOOP AT ITAB2A.
IF ITAB2A-BMENG <> 0.
IF ITAB2A-BMENG <= REMAIN_QTY.
REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
ELSE.
ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
REMAIN_QTY = 0.
ENDIF.
ENDIF.
ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
IF NOCONF_QTY >= NODELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NODELV_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NODELV_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NODELV_QTY.
ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
IF ITAB-FKSAA <> 'C'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
REFRESH ITAB4.
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDLOOP.
loop thru PO's for SO item
LOOP AT ITAB4.
select delivery lines for PO item
SELECT EINDT EBELN EBELP MENGE FROM EKET
INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING EKET-MENGE REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING EKET-MENGE COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = EKET-EINDT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = EKET-MENGE.
ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
ENDSELECT.
ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
IF DELV_QTY < ITAB-KWMENG.
THIRD_QTY = ITAB-KWMENG - DELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING THIRD_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING THIRD_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE2 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = THIRD_QTY.
ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
DESCRIBE TABLE ITAB1 LINES ZCNTR.
IF ZCNTR = 0.
WRITE: / 'No Data Found for Selection'.
STOP.
ENDIF.
SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
LOOP AT ITAB1.
IF ITAB1-ZDATE1 = SPACE.
ITAB1-ZDATE1 = '99991231'.
ENDIF.
IF ITAB1-ZDATE3 = SPACE.
ITAB1-ZDATE3 = '99991231'.
ENDIF.
get SO item detail
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
AT NEW KUNWE.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
WHERE KUNNR = ITAB1-KUNNR.
CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY ' '.
CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY ' '.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
FORMAT RESET.
SKIP.
ENDAT.
print out backlog detail
CLEAR T171T.
SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
WRITE: /1 ITAB1-VBELN,
13(6) ITAB1-POSNR NO-ZERO,
21 ITAB-MATNR,
41 ITAB-ARKTX,
83 ITAB1-ZDATE1,
95 ITAB1-ZDATE3,
107 ITAB1-ZDATE2,
119 ITAB-ERNAM,
129 ITAB-BZIRK, 135 T171T-BZTXT,
157(20) ITAB-BSTKD,
179(12) ITAB1-ZQTY1 DECIMALS 0,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2,
225 ITAB1-ZDESC.
AT END OF VBELN.
SKIP.
ENDAT.
print footing at ship-to customer
AT END OF KUNWE.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
SKIP 2.
ENDAT.
AT LAST.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE: /1 'Report Total:',
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
ENDAT.
ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
REQ_DATE = SPACE.
EXIT.
ELSE.
REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE FTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE FTAB INDEX TAB_INDEX.
REMAIN = REMAIN + FTAB-WMENG.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
COM_DATE = SPACE.
EXIT.
ELSE.
COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE CTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE CTAB INDEX TAB_INDEX.
REMAIN = REMAIN + CTAB-ROMS1.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT. -
Valuated sales order stock for configured material
Hi All!
I have a small problem : I created a new type of material (OMS2) - a configurable one, managed on quantity and value basis. I work with valuated sales order stock for configurable materials but the account in the purchase requisition is determined by means of event key GBB insted of event key BSX.
Where is my error?
Any idea would be appreciated.
Florina CHi
I think you are talking about Special Stock "E"...ie) Sale Order Stock...
If my understanding is correct then,
If you go and see the Table T156....For the
Movement Type: 101,
Special stock Indicator : E,
Qty. Updation Checked,
Val. Updation Checked,
Movement Indicator : Against PO,
Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these settings you cannot change...
This linkage you can view in OLMW-----> Account Determination -
> Acc. Determination W/O Wizard -
>Account Grouping....also
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM -
GATP/ATP Check for Different Order Types for same material
Hi :
I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
In real time the atp and cumulative atp position should be same in R/3 and in APO.
Please let me know solution for this issue.
With Regards
Ashish GuptaHi Ashish,
Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
My scenario goes this way:
I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
Thanks in advance,
Susanth
Maybe you are looking for
-
Ipod ITunes library help please!!!
Hi, i hope someone can help. I had to return my laptop to work and it contained my ITunes library (i have spent a fortune). I thought that i had stored all the purchased songs on a memory stick but when i put this into my new laptop it won't work. I
-
HT2589 How to start an iTunes account with an iTunes card with $15?
I need help.
-
How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?
-
Windows 7 64 bit on iMac display problems and instability
I received my iMac 27" quad core with 8 gig ram & 2 x 1 TB hard drives last Friday. I'm using Boot Camp to run windows 7 64 bit on maximum 2560 x 1440 screen resolution. I get intermittent but often display problems in windows 7. I get areas of the s
-
URL not loading for Web Logic in 11g
I have installed 11.1.1.5 on RHEL 5.4 64-bit. When the initial install was done everything started and was able to access URL's. Since that time I shutdown the services and have restarted. When I run the startWebLogic.sh from the user_projects/domain