Delivery is not possible as per Schedule line dates

Hi Gurus,
The schedule lines insales order are for eaxample---
01.12.2008 -   10 pieces (quantity)
15.12.2008 -   10
10.01.2009 -   10
25.01.2009 -   10
Tried to deliver the quantity 10 dated 15.12.2008 in the last after all the materials pertaining to other dates are delivered, but system is throwing error as no schedule lines for dated 15.12.2008. But when i checked, delivery is not done for 15.12.2008 and the rest are completed.
But system allows to deliver the balance 10 quantity either on 25.01.2009 or on a future date but not on 15.12.2008 on which delivery was not done.
What could be the reason????
Thanks for your help
MM

Hi
When I see the schedule line in the sales order where in the qty in the delivered qty column (second column from the confirmed qty column) is updated item wise irrrespective of the delivery done as per scheduleline date.
It means though the delivery and PGI is not done for the date 15.12.2008, but the qty in the delivery qty column is updated and the balace to to be delivered shows for the last date.
So here iam able to deliver only on the last date i.e. 25.01.2009 or at a later date for the schedule line date missing in between and not on the specific date.
Is this how SAP standard works - I was wondering why i cannot deliver any schedule line qty and date later after delivering quantities of the subsequant schedule lines.

Similar Messages

Delivery item per schedule line

Hi all,
Thank you for viewing my posting, I have the requirement as following:
I have two SD schedule agreements, there are several schedule lines on JIT delivery Scheudle tab for each schedule agreement, these two schedule agreement are for same customer, have different material.
What I want is:
When I create delivery for these two schedule agreements in VL10A, these two schedule agreements are combined into one delivery note, but the delivery item per schedule line on the delivery note.
E.g.
one schedule agreement has 5 schedule lines
the other has 4 schedule lines
After I create delivery for these two delivery notes in VL10A, there should be 9 items on delivery notes, one item per schedule line.
Do you have idea on this? I do not want to combine several schedule line into one delivery item.
Thanks!
Alex Lu

Dear Alex,
You try these copy control settings between Scheduling agreement and delivery document.
Go to VTLA transaction select your document types
First you go header level settings here you can find the check box field called Copy item number check this then try.
If it is not full fill your requirement then go in to the item details here you can find the copying Routine maintenace field Item Data Under Data transfer Tab,this field will have 101 item Routine as per the standard,you take ABAPer help you copy this routine then change according to your requirement then assign new routine here.
I hope this will help you,
Regards,
Murali.

Change schedule line date

Dear All,
I have a requirement where required delivery date for one divisions material
in sale order and STO should automatically propose todays date plus 10 days i.e.
if any sale order or STO created today then required delivery date in STO and
SO should show 24.10.2010.
Accordingly we have maintained planned delivery time in material master 10 days in MRP2
view and it is working fine but another requirement is that user can reschedule the
delivery and he can change the schedule line date in So (RV45A-ETDAT) before or after
10 days in VA02 but it is not allowing to change it is considering todays date + 10 days.
In STO it is allowing for change the delivery date (MEPO1320-EEIND).
Plz advice how I can make the field RV45A-ETDAT changeable in sale order through VA02.
Regards,
sps.

Hello,
If you want a sales order to have the requested delivery date automatically populated with today's date +10 business days, this can be maintained via the following SPRO path:
SAP IMG --> Sales and Distribution --> Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types
Go into the sales document type you would like to maintain. In the section "Requested delivery date/pricing date/purchase order date", there is a field Lead Time in Days. Put 10 in here, and the requested delivery date will automatically be set to +10 days when an order is being created.
Planned delivery time in the material master is for when you're out of stock and the system proposes the next available delivery date. If you have stock on hand, when the availability check runs the system will use the line level delivery date. At order entry, when a line item created this line level delivery date is taken from the requested delivery date.
I hope this helps you.

MASS CHANGE IN SCHEDULE LINE DATE

Hi All,
Will u advise whether it is possible to change schedule line date in MASS
Example. We are having make to order scenario. Sales order is prepared with 25 different line items with shipment date 10 th Feb. Out of these 25 items 10 items are ready by 20 th Jan. If we want to ship these goods on 20 th Jan. we have to change schedule line date item wise.
Is there any way that we can make this change in a mass without changing delivery date of the sales order.
Thanks
Ravi

V_V2 calls a program that can be 'customized' since it consist of 2 phases:
1) selection phase
2) rescheduling phase
You can copy program SDV03V02 into a custom one and add your own selection criteria without altering the second part of it.
I alreay made it and it works fine even when upgrading.
regards
Roberto Mazzali
pls. reward if helpful

Delivery from sales scheduling agreement with one item per schedule line

Hi all,
I have a sales scheduling agreement where the same part number has 3 different JIT schedule lines and I need to create a delivery with 3 item lines: every item line of the delivery has to be referred to one schedule line of the scheduling agreement.
When I create the delivery with transaction VL10E it has only one item line and its quantity is the sum of the 3 schedule lines of the sales scheduling agreement.
I've tried to change the customizing of the User Role, choosing the Split Schedule Line = 2 ("One item per schedule line") but the delivery is created again with only one item line.
How can I solve this issue?
Thanks in advance for reply

Dear Alex
The SAP standard behaviour is that all schedule items with delivery date in the past have to be rescheduled anyway to one date and are combined therefore.
Partially this behaviour can be influenced in VL10* by 2 parameters in
the user role : Split per sched.line and Rule (delivery qty).
Please find below informations about these different parameters
"Split per sched.line propose you 3 Rule for creating one delivery item
per schedule line. In a delivery list in item view with multiple
schedule lines, you can decide for the same document item whether you
want to generate one delivery item per schedule line or whether you want
to deliver the cumulated quantity of the last schedule lines selected.
About rule for delivery quantity, the following rules are currently
implemented:
1. No cumulation
The open schedule line quantity to be delivered is the quantity at which
the list line is delivered.
2. Sum of all open schedule line quantities to be delivered that fall
before the chronologically latest date in the to field (following the
Deliv. creation date field) of the selection criteria.
3. Sum of all open schedule line quantities to be delivered whose
delivery creation date falls within the selection time frame (between
the dates in the Deliv. creation date and to fields, respectively),
making the calculation of the quantity to be delivered consistent with
selection criteria. However, calculationof the quantities delivered with
the order's schedule line quantities is not affected."
Hope this helps.
Regards
Tonia

Purchase Ord delivery date changes SO schedule line date?

Hi,
I am purchasing a drop ship item as per sales order. The account assignment in the purchase order is the Sales order.
Why in some cases the schedule line date in the sales order changes when I change the delivery date in the purchase order? whereas in other cases it does not.
Please help me out with this question.
Sincerely.
Puja

Puja,
The SO schedule line date should not change when you change the purchase order delivery date.
However, if you change the PO del date, AND a user performs re-ATP against the sales order, OR if you are running backorder processing (rescheduling) of sales docs, then the SD item/schedule date may change to match the changed availability situation caused by the change of the delivery date of the PO.
Look in the sales order in VA03, then Environment>changes. Look to see if anyone or anything has 'touched' the SO item that is home to the schedule lines that were affected.
Regards,
DB49

Delivery before the schedule line date in scheduling agreement.

Hi All,
I have a situation where in I am using JIT delivery schedule for processing the delivery requirement from customer. In this, lets say, I have a schedule as 08/05/2009 for material A to deliver 1000 qty and the material is made available to me after production as of 07/05/2009 and I want to despatch the material on 7th only and not on 8th. The system does not allow me to do this.It allows me to make a delivery only on 08/05/2009.
Is there any alternative to this and is this SAP standard behaviour.

I think you can change the schedule line date in scheduling agreement itself and do the delivery.
regards,
Sudhir

Schedule line date vs actual delivery date

Hi All,
Is there any standard report or work around available to compare customers schedule line date vs actual delivery date
Thanks & Regards,

Hi Abir,
I think your talking about a "On time Delivery report" to track actual delivery against the quoted delivery.
There is no standard report available in SAP for this.
This is hard to track if you have maintained multiple schedule lines for a one single line item.
(Where you maintain multiple delivery dates in schedule line level to quote multiple delivery dates. If you have maintained multiple line items to quote multiple delivery dates, this would have been easy)
Because you do your delivery based on your sales order line item. Not based on your schedule lines. Therefore in your delivery line item table (LIPS) you cannot see Schedule line number. Therefore you cannot compare quoted delivery against actual delivery date.
Assuming you have maintained your multiple delivery dates in Schedule line level, this is how you have to proceed.
- Use VL10E transaction to create delivery against schedule lines.
- Create append structure in the LIPS table to accommodate to carry the schedule line item of sales order in each delivery document + Line Item combination.
- Use this user-exit u2013include MV50AFZ1. Can save the particular sales order schedule line in the LIPS, earlier created append structure field.
Then you have the schedule line number available in the LIPS table, Now you can code your report to capture quoted delivery against actual delivery date.
Hope this helps you !
Anupa

Schedule line date is not updating in line with P.O confirmation.

hi,
when sales order created for individual requirements it automatically creates P.R and this P.R is converted to P.O.
whenever this P.O is updated with confirmation category like acknowledgement or inbound delivery it should update Sales order schedule line for the delivery date. but this is not happening, what is the configuration required for this.
Kindly reply.
Regards,
Venkatesh

hi,
when stock is not available then the customer order is booked as special requirement and P.R created against that order. Then the P.R is converted in to P.O and P.O is updated by O.A or Inbound delivery but the delivery dates from O.A or inbound does not update the sales order schedule line.
Regards,
Venkatesh

Required Delivery Date vs. Schedule Line Date vs. Calendar

Hello Experts,
The Factory Calendar shows that Monday to Friday are the only working days. Now, the user created a sales order and manually entered a date that falls on a saturday. As a result, the schedule line dates were all set on saturday. Availability check is in place and stocks are available.
My question is: Why did the system proposed saturday as the schedule line date when the calendar shows saturday is not a working day? Am i correct to conclude that the manual entry in the required delivery date in sales order is the priority in determining schedule line date? Your inputs on this scenario would be highly appreciated.
Best Regards,
Gene

Even though Sat is a holiday, the system will propose a CSL and confirm the stocks but the delivery would be created only the next working day. This is controlled by the factory calendar.
Now, the system confirms based on the stock availability on that day, this does not mean the delivery would be created the same day. For delivery creation the factory calendar comes into play and the lead times are calculated based on the calendar.
Regards.

Delivery Schedule line date customer receiving day dependant

Hello Experts,
We are working with transfers between plants with STO UB. Tha availability check is activated at storage location level and it works correctly. Now, some plants have a special day for receiving goods. Say, Plant A receives on monday, plant B receives on tuesday, Plant C receives on wednesday.,...
We want to influence the delivery schedule line based on the goods receiving day of the requesting plant?
ex : if the system determines delivery schedule line date on 31/01 but the receiving day of the plant is monday, so the system have to update this date to the next receiving day (04/02 = monday)
Thanks for your help.
Regards.
A.

Hello Experts,
We are working with transfers between plants with STO UB. Tha availability check is activated at storage location level and it works correctly. Now, some plants have a special day for receiving goods. Say, Plant A receives on monday, plant B receives on tuesday, Plant C receives on wednesday.,...
We want to influence the delivery schedule line based on the goods receiving day of the requesting plant?
ex : if the system determines delivery schedule line date on 31/01 but the receiving day of the plant is monday, so the system have to update this date to the next receiving day (04/02 = monday)
Thanks for your help.
Regards.
A.

Delivery Split based on Schedule line data

Hi,
Would need some help in determining how to proceed with splitting delivery based on Schedule line data (Date/Time).
If S.A 1 has line item 10 with two schedule lines SL1 and SL2 which happened in different times of the day, how to split this S.A to two deliveries in delivery creation (thru VL10E).
Please suggest.
Thanks,
Preema

Hi,
In copy control see which Split routine is there, with the help of abaper
Copy that and create new one, an maintain your date criteria in newely created routine and assign that.
T-code VOFM
Kapil

Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?

Hello,
How can I fix this problem?
Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?
Thanks in advence,
FL

FLOureiro
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
For your immediate issue, have you update the Online Services in preferences?
Where are you in the program when you get the message "Not possible to initialize on-line services".
Are you in a country outside of the USA?
There certain online services that are just not available outside the USA.
Please review and consider and then, based on your details, we will consider what next.
Thank you.
ATR

Schedule Lines dates for sales order

Our goal is this: On the line item > Schedule Line tab there is the requested delivery date. In the details of that schedule line there are five different dates:
Delivery Date
Goods Issue Date
Loading Date
Material Aval. Date
Transportation Plan. date
We need to be able to put in the customers requested date that is in the future on this schedule line, but if the parts were to be recieved in earlier then the date they requested, then we would want the parts to ship out early automatically.
For Example: Customer Requested date is 01/31/08 and the parts are confirmed to come in on 01/31/08. The parts end up coming in on 01/20/08, so the next time the delivery list is run, we would like the parts to ship out right away.
Is there a way to do this?

Thank you for the quick response. I understand that we can use the reschedule report to manually monitor the product whether is comes in or not, but was hoping to achieve having a static date on the schedule lines of when the customer requests the parts, and then the delivery date that activates the MRP and ATP checks would be an earlier date. So when the parts come in, it would read from the delivery date.
Not sure if this is even possible, or if SAP standard for the schedule line dates is to how only one active date per schedule line.

How to get schedule line date copied to "First date" in sales order

Dear forum
I am creating a sales order as normal and put in a Requested Delivery Date (KETDAT) for the order.
This requested delivery date is then copied to the "First date" (ETDAT).
Now, the ATP is checked for each line item in the order and a Schedule line date / material availability date is calculated for each line item.
My question is: Is there any way to have the "First date" field of the line item in the sales order populated by the first material availability date (calculated by ATP), instead of copying the Requested Delivery Date? Any user exit? Any config?
It would mean that every time I rerun ATP check in the sales order line item, the "First date" field would change if the material availability date change. If there is multiple material availability (multiple schedule lines) dates per line item, then the earliest date would be copied to the "First date" field.
Is there such functionality? Or possibility to config/program?
/Ola

Kannan
OK. Unfortunately reservations cannot be created at the serial number level. So the unsupported way of doing this is updating the mtl_serial_numbers tables. I hope you would know (by some means) which serial numbers you want to allocate to a specific sales orders. If you know, update group_mark_id column in mtl_serial_numbers table with your order_line_Id, This will avoid any one from picking the serial numbers (they will not come up in the LOV or will not be auto allocated).
But you have to make sure to take it off when you actually want to pick this order line and allocate this serial number. So just before you pick release/ confirm this order line you need to update column back to null so that you can allocate that serial number.
Thanks
Nagamohan

Delivery is not possible as per Schedule line dates

Similar Messages

Maybe you are looking for