Delivery is still showing in md04

Hi pp gurus,
I already posted delivery for the S.O. but still it is showing in MD04. MTO 20 SCENARIO
kINDLY TELL ME what is the problem.
urgent ,thanks in advance

Hi
please describe the lines in MD04 incl the different quantities in detail:
Date                                                                           Rec./req.qty                                       Available qty
14.2.2008          Stock (at plant level)
                        Sales order stock
                        Delivery
From your mail I understand that the situation is as follows:
Delivery item quantity             172
Material document quantity     172
From delivery item you can go one level down and look at the scheduling lines: What is the situation there?
From delivery - document flow, you can also see the sales order. What was the quantity of the sales order item?
Eivind

Similar Messages

Sales order line items delivery cancelled but still appears in MD04.

Hi PP Gurus,
In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
Thanks and Regards,
SHARAN.

Hi
Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
Regards
Brahmaji

Sales Order is cancelled but still 1 sales oder item is showing in MD04

Hi,
I have created one Sales Order. Due to some reasons i have cancelled that sales order. Out of 5 sales order items 1 item is still showing in MD04.
I dont understand what has happened.
Please guide me on the same.
Regards,
Amit

Hi,
Try to run report SDRQCR21 and have look at sap note 25444
You run the report in transaction SE38.
This should normally be done by your consultant
You can display a SAP note at http://service.sap.com/notes but you need a user and a password.
Regards,
Sankaran

SUBCONTRACT: MD04 still shows requirement of component though ME2O does not

HI ALL,
the subcontract purchase order is already delivered in full.
but In ME2O ,the requirements of the child component is '0'.
while in MD04 the requirement of this component is coming 11.
so could any body tell me as why the requirement is still showing in MD04 though no component needs to be provided to the vendor.thanks.
regards,
anubhab

Hi,
There´s a report you can run RM06C020 from note 115899, but I would recommend that you enter a ticket at SAP, so that an expert has a look into your system first.
Best Regards,
Arminda Jack

MD04 still showing outstanding PR.

Hi all,
MD04 still showing outstanding PR although i already open the PO and also done for the goods receipt but the it still list out the PR. And when i double click on the PR, it give a message said that "the purchase requisition has been completely ordered."
pls advise on how to remove it,
thanks.

Hi,
Please go to t code ME52N go to item details and quantities/dates tab and tick the button closed.It will not show in MD04
Thanks
suresh

MD04 still showing closed PO items

Dear All -
MD04 still showing the closed PO items. I tried running the report SDRQCR21. But it didnot correct the MD04 listing. And it also shows the PO items which are quite old ( more than 3 years old closed items).
Need your ideas to remove the closed PO items from MD04.
Thanks,
Siva

You mentioned "Good issue" so I suppose your PO is a STO (stock transport order).
In this case, check that the ordered quantity, GI quantity and GR quantity match.
They probably don't as you wouldn't otherwise get the error message stating the GI and GR are not the same.

Order related invoice created still showing in delivery due list

Dear All,
i am having an order type as ZSCR
which is both order related billing and delivery related billing type assigned to it.
both the order related and delivery related invoice is ZSCR
the problem is that when ever i am creating a order related invoice the order still showing in the delivery duelist even the invoice is already created.
so how to stop the order to come in delievry due list after it has invoiced.
Thanks With Regards
Subrat

hi,
if i understand correctly order related billing is done while you go for third party scenariio and delivery related billing is done when you deliver the goods
if i am right in understanding, in third party scenario you change the item category from TAN to TAS whicn automatically will create a PR the schedule line category changes to CS which implies order is not relevant to delivery as your third party vendor will be doing the delivery so you dont do the delivery and your order willnot be shown in delivery due list.
in the other case you follow the normal OTC cycle.
regards,
krishna

Confirmed Qty still shows ZERO after complete delivery

Hi
A particular item in a sales order has been completely delivered and billed, but in the schedule lines tab, the confirmed qty and delivered qty are still showing as Zero. Also there is a tick mark for the "Schedule Lines Exist" column for that item which implies that the confirmed quantity of the item is smaller than the order quantity.
Checked the forum but couldnt find anything related to this scenario.
What needs to be done?
Thanks & Regards
Madhu

HI,
Please check for respective Material at Sales: General/Plant tab what is the availability option selected if it is anything other than KP(No check), then system confirms the quantity as soon as the sales order is saved.
Even though the Delivery has been Deleted, in your case if Quantity is confirmed against that Sales order that Quantity will be available for other SalesOrder and their corresponding Deliveries.
U can test this my reducing the Quantity of that Line item from that sales order. You will find that Quantity reduced from old sales order will be available for new Sales Order.
Hope this will solve your Query.
With Best Regards,
RB

Same PR still outstanding in MD04 although the PR-PO-MIGO and MIRO happend

Dear experts,
following is the scenario-
for material type: V1 PR is created (01/03/2011) once it went below the reorder point with delivery date 01/11/2011 as per the lead time (7 days) and PO. now the goods receipt happens on 01/21/2011 and IR on 01/26/2011.
and again the SAME PR (with exception message 07) as above is again shownig in MD04 with the same creation date and PO but its open -
Question: does the PR is again outstanding because the delivery of the goods was not as per the lead time (why the same PR is still showing although the PR-PO-MIGO-MIRO already ahppened for the material)?
thanks for your replies.
Edited by: Coolio7 on Jan 28, 2011 8:21 PM

Propably some one created a PO directly instead of converting the PR and PR is not getting deleted because it is firmed. Delete the firming indicator and check.
Cheers
Rav

Sales Order number is not showing in MD04

Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
Aman

Hi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman

Blocked sales order showing in MD04.

Hi,
I have put delivery block in sales order, still sales order showing in stock requirement list (MD04)?
Why and how I can avoid this?
Thanks in advance

Dear ,
You have set Blocked in sales order , it will still show up in the MD04 because MD04 shows all the reciepts and requirement as per filetre and selection rule .
n case , you put the schedule line itme categery as CN or set reeason for rejection option in Sales Order line item (va02) , then it will not show up in MD04 .
Sales Order - MD04
Hope this is clear
regards
JH
Edited by: Jiaul Haque on Aug 26, 2010 11:01 AM

Items have been goods issued in R/3 but are still showing as Not GId in APO

2 products have been goods issued and the delivery is complete in R/3 but are still showing as Not Goods issued in APO.Please suggest.

Hi Usman,
Could you please let me know which table did you refer to find out the status of an order i.e., whether the order line has been Goods Issued or not?
Thanks,
Babu Kilari

Sales Order deleted but Demand still appear on MD04

Dear Master , anyone know for a Sales Order been deleted but the Demand still appear on MD04, I even tried as below but still no solution
- ran report SDRQCR21 in SE38 that cleared up the demand.
- Try rerunning MRP with planning mode 3
- Mark delivery complete for the order.and make rejection in the sales order by entering the reason.
Thank you.

1) Please check any Open delivery is exist for the order, if yes delete the Delivery
2) Close the order by order rejection
3) run SDRQCR21 in SE38 with data transfer , planning file entry and processing per material tick
4) This will remove the planning file entry and demand and run MRP
5) If problem still exist , then raise a Question to SAP with the help of Basis

Schedule agreement not showing in MD04

Hi All
We have a schedule agreement created and its not reflecting in MD04. According to the thread i changed the avl check to 02.
But its still not showing in MD04. So my question is do I have to do any other thing so that the avl chk change will get affected for same schedule agrmnt or I have to create a new one so that it will show in MD04.
Thank You.

First you need to identify what schedule line category is flowing in your sale order. Normally, this would be CP. So next go to VOV6, select the schedule line category and execute. There tick the box for "Req./Assembly"
thanks
G. Lakshmipathi

PIR not showing in Md04 after certain date

Hi
The PIR's are coming from LTP.
The PIR's which are created after 03/2015 are not showing in MD04
MRP run back ground with NETCH still why PIR's are not showing?
What settings I have to check..
Regards,
Srihari.M

Please check the following :
1.If you have done splitting of the required qty during PIR creation . , please check in MD62 whether , you have un-checked the Active Version for some of them .If those qty. are falling after 03/2015 , then it will not pop up in MD04
2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
Regards
JH

Delivery is still showing in md04

Similar Messages

Maybe you are looking for