Delivery issue with movement type 934

I am facing issue in delivery note
Few Delivery are PGIed for consignment order ZKB, and the stock should be transferred to Service Plant xyz by movement type 934 W. But we found the movement type 934 W did not be triggered after PGI is complete.
Can you tell me the reason of cause, why the 934 W have not been post.
Pls help

Is this movement type available in SAP..Kindly confirm the use of 934 movement Type as might be I don't know about this one.
Best regards,
Ankur

Similar Messages

Issue with Movement type

Dear Experts,
I am facing issue and in understanding with movement type 103,105 and 106.
Purchase order has been created with 100 pcs
1) Movement type 103 made for block stock.
2) Movement type 105 to remove stock from block stock.
3) Movement type 106 to reverse 105?
When I try to check EKBE table it shows me different entry
Purchase document EBELN compare with Reference document LFBNR
Movement type 103     Reference document is same document number
Movement type 105     Give reference document number as 103
Movement type 106     Give reference document number as 103.
Question - Why Movement type 106 show reference document number of 103.
Thanks
AB

hi,
Please check the table MSEG. for 106, it will have reference for material document of 105
field SMBLN instead of LFBNR
With this field, you can go for the logic.
select all docs from EKBE
Moreover, you can use field MKPF-XBLNR for getting the delivery note field which will be same for cancelation docs. for ex 105 and 106 wil have this same value
this field will make it easy for you to group the GR and their reversals for calculations.
Regards
Vivek Singh

Error in Goods issue with movement type 541

Dear Users,
I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
Please help me out

You can provide material to vendor either using Transaction codes :
1. MIGO - Transfer Posting - Other - Movement type 541
2. MB1B - Movement type 541 or
3. ME2O - Mention the vendor & execute
S. Kumar

Issues with movement type 621/622

Hi All,
We have a process as below
1. Rental tool order (ZROT) for Material type LWRK
2. Outbound delivery (ZLF): post material from unrestricted use to customer returnable stock
3. Return order (ZRE)
4. Inbound delivery (TC VL01n): post material from customer returnable stock to blocked stock (returns or quality inspection)
For step 2 and 4 we use movement types 621 and 622. The problem occures now in step 4 because 622 reduces the customer returnable stock to unrestriced use. What we need is to reduce customer returnable stock and increase blocked stock.
How can we make the stock to appear in blocked stock ?
Thanks,
S S K

hi
651 Returns from customer (Shipping)Using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns.
653 Returns from customer (Shipping) to unrestricted-use stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators: E
655 Returns from customer (Shipping) to stock in quality inspection
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators: E
657 Returns from customer (Shipping) to blocked stockWith this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators: E

Problem in Material issue to WBS with movement type 261 Q

Dear Experts,
I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
Special stock 0001 Q AS0111 000000000000000015 of this material does not exist
Message no. M7076
Diagnosis
No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
Regards

Hello,
This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
Check this and revert.
Keshav

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

Amount on Goods receipt for return orders is wrong with movement type 653

Hi All, I am sorry if it is a simple question because i am an abap'er.
My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) - PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
The next scenario is if the material is returned? This is where we are having issues
Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
I even tried changing the schedule line category to DN but no help.
I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
My pricing settings are good.
It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .

Have a look at any of the following notes:-
1) Note 171989 - Sales-order-related productn: Custmr exit COPCP002
2) Note 520000 - FAQ: Valuated special stocks
3) Note 557582 - User exit and valuated sales order stock
4) Note 580228 - Incorrect prices for materials procured externally
5) Note 983193 - Docu:Externally procurd material in valtd sales order stock
thanks
G. Lakshmipathi

Revesal of document posted with movement type 654

I have created one outbound delivery using tcode VL01NO (Create outbound del without order reference). In PGI material qty was issued using movement type 654. Now, I need to reverse this document i.e. reversal of movement type 654, but system is not allowing the same.
Pl help on this
regards,

movement 654 is already the reversal to movement 653.
A reversal movement type does not have a reversal movement type.
you may need to create a new schedule line category in VOV6 to create a new outbound del without order reference with a 653 as movement

MB1B error with Movement type - 411 / E

Hello MM Sapperu2019s,
I have an issue in transaction MB1B where I need to move the sale order stock to unrestricted with movement type 411 /e I am getting the error,
Dlv. type (dlv. catgry OD for mat. XXXX and BWART 411) cannot be determined
Message to Moderator,
I believe this issue has been discussed earlier in SDN but not with similar to my case. Hence not to close my thread as it has been disused earlier.
I also refer the below links but couldnu2019t able to find the detailed root cause for my issue.
Error in MB1B posting (Issue is related to 411/Q)
Delivery Type cannot be determined in subcontracting (Issue related to Subcontracting)
Also I have referred the OSS notes and my observation are as below,
1238654 which has been mentioned by Jurgen and observe this is not relevant to my case as we are using the standard Ware house.
540185 which has mentioned by kuberk and identified table T156Q is perfectly maintained.
Hence please help me with your valuble inputs to identify the detailed rootcause for my issue.
Br
Kumar.S

Dear Kumar,
Can you tell me the exact error number like VF569........ please.
So, I'll able to tell you exactly......
Thanks
Farrukh khan

Vendor Evaluation_On time delivry with Mov type 103

Hi,
We are in process of implementing Vendor Evaluation in our system.
In th eprocess we came to know that for calculating score for sub
criteria "On time delivery" system only considers the Goods Receipt
posted with mov Type 101 and 105.
We have a business scenario in which we first post 103 and ask user
to do the Quality check of the material received.Once the user accept
the material we accept the material by posting goods receipt through
Mov Type 105.
this acceptance time may differ case by case depending on the
material.
Now if we go by the standard system settings the Vendor's score will
be affected if the users acceptance and hence the 105 posting is
delayed.
Kindly guide us how to overcome this issue.
Rajesh

Thanks...
If possible can you please explain , how the enhancement MM06L001 will overwrite the score with an example.
Rajesh

Material to Material transfer with movement type 321

Dear Experts,
Material to material transfer with movement type 309, the system create a price difference account if price control "S"
but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
Exp--- Material "A" with STD price 150
Material "B" with STD price 100
document is created
Material A A/c. Credit 100
Material B A/c. Dr. 150
My question is, the price difference where is adjusting, is finance and costing books of account will effect.
Kindly help to solve the issue
Thanks & Regards,

Dear Wasim,
321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
It's not used for material to material transfer.
Check and revert back.
Regards
Mangalraj.S

Goods Receipt through internal order with movement type 262

Dear Friends,
some of our users making entries like the following
1. created Internal Order
2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
3. Stock updated
i just want to confirm, we not issued like X material, even stock not available, we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
kindly advice please if it is wrong then tell me the process.
Regards,
Rajesh G

HI,
if we receive material from subcontractor what process we can do...
can you explain your issue exactly what problem you have at your end .
I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
then you can try movement type 501 or through physical inventory t-code MI10
Regards
Kailas Ugale

Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit Jaiswal

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

BAPI to reverse Goods Issue for movement type 601

Hi Everyone,
Does anyone know of any BAPI that could be use to reverse Goods Issue for Movement type 601?
I tried using BDC of transaction VL09 and was able to reverse the GI document successfully but the return message type was 'E' with unreadable message -
Tabelle 'E' enth#t keinen Eintrag f# 'Ch 004 &'
When I tried using BAPI_GOODSMVT_CANCEL, I get the error message 'E M7 130 Material document cannot be processed'.
Best Regards,
Junwen

hi, Junwen!
the following code works pretty well:
      fp_vbeln = vbeln_val.
      fp_budat = budat_val.
      fp_tcode = 'VL09'.
      fp_vbtyp = 'J'.
      CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
        EXPORTING
          i_vbeln                         = fp_vbeln
          i_budat                         = fp_budat
        I_COUNT                         =
        I_MBLNR                         =
          i_tcode                         = fp_tcode
          i_vbtyp                         = fp_vbtyp
        TABLES
          t_mesg                          = it_mesg
       EXCEPTIONS
         error_reverse_goods_issue       = 1
         OTHERS                          = 2.
luck.

No authorization for this transaction with movement type 601

Dear All,
This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
Thanks and regards
Chandra

Dear Chandra,
Check with -
T. Code: OMJJ
Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
Check whether the Transaction is allowed for Movement Type 601 or not
Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
Up-there, Tab: New Entry. Click on it.
Maintain entry as:
MovTy: 601
TCode: As reqd.
and Save.
Best Regards,
Amit

Delivery issue with movement type 934

Similar Messages

Maybe you are looking for