Delivery not created in background for VL10 or VL10BATCH

Hello,
My client is using ECC6.0. When I schedule a job in background for VL10 or VL10BATCH, only the delivery due list appears. No deliveries are created. Also referred to OSS note '310022 - VL10: Schedule batch job/variant creation' and changed the fcode profile to '5001' for the user role being used. Still no deliveries are created. Require your advise.
Thanks,
Thomas

Hi,
We also faced the similar problem so I would suggest you to put the program of respective transaction(for e.g VL10A/VL10B) in background and it will work fine.
Regards
Karan

Similar Messages

Single STO Outbound delivery not creating for different lines in PO.

HI ALl...
1... I have 2 different ST PO which raised by other plant(plant is same), and it contains different line item.
When try to do outbound delivery in VL10B, it is creating seperate outbound delivery doc to each item, but not created single doc for all items.
Please let know, if any thing needs to be done, to get create single outbound delivery for all the items in PO.
2... Is it possible to pick the Price automatically ( MAP of the supplying plant material), while create Billing in VF01.
Regards
Chandradhara...

HI..
I have checked and corrected Delivery date/ loading group and Transportation group, now it is coming single delivery document.
OTHER REQUIREMENT IS;
We need MAP of the Supplying Plant to be picked will do billing for PRICE condition. What settings should be done
Regards
Chandradhara

Delivery not created in cash sales

Dear Gurus,
I am facing an error while processing a cash sales scenario.I am creating a sales order for cash sales and trying to save it.After saving system shows error as orders saved ,delivery not created.(message no V1261)
I have checked all the configuration in document type.
Immediate delivery is maintained as X
Shipping condition - 03 immediately
Lead time - 0 days
The system is showing sufficient stock in MMBE. (the material is batch managed)
still it is not creating delivery document.
Against the message V1261 I found one SAP note but it is of 1998 and not valid for ECC 6.0
Please suggest solution on highest priority.
Rgds,
Anand

Hi there,
I see it in 2 ways:
1) If you want auto delievry immediately after the SO is loaded, then the order loading prog MV45AFZZ should call delivery prog SAPMV50A automatically if order type is BV after order save . For this you need to customize sothat delivery is created automatically after order is saved.
2) If there is a manual delivery involved, check what error you are getting when creating a delivery. Pls refer to my comments above to check the possible errors.
Hope this helps
Regards,
Sivanand

Delivery not created in Merchandise distribution - WF30

Hi Experts,
I am came accross an issue wherein delivery not created for merchandise distribution.
It is automatically created at the time of goods receipt.
We are using flow through process.
On same day, three PO created via allocation table. Each PO had its STOs linked to it and same article in it.
For two POs, merchandise distribution happened automatically on goods receipt.
For third PO, it failed for same article.
I can see in WF30, there is FT qty populated in adjust button.
That means qty is adjusted per STO.
But then delivery not created.
I am wondering why is is not created for one PO but processed successfully for another two POs.
Article master is not chenged.
Can anybody please advice, what could be the possible reason for it.

Sagar,
For the article in the third PO, please check what storage location is being picked up. Check the cumulative ATP quantity for this article/storage location (use Co09 with checking rule B). There maybe a shortage of stock.
Thanks,
Suhas

Outbound delivery not created automatically

Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
Lindsay

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

RFC Sender error could not create function template for...

Hi,
I am trying to send an async RFC to XI. Since I use IN BACKGROUND TASK and COMMIT WORK I got following error in the SM58 of the back end system
Server repository could not create function
template for 'XYZ'
In the XI, I see nothing (no message, no error)
How can I fix this problem?
Thanks
Thomas

Hi Thomas,
You may need to have logical destinatio types for sender RFC. (and in the refernce entry you need to provide the actual destination)
may be some other errors also, Check this link and see if you have followed all the steps.
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/frameset.htm
Hope this fixes your issue.
Regards
Vishnu

Outbound delivery not created

Hi,
I have the following scenario in STO:
Planned delivery time for a material =2days
When material delivery date is on wednesday , system proposed delivery creation date as monday-that is ok.
When material delivery date is on thursday, system proposed delivery creation date as tuesday- that is ok.
When material delivery date is on tuesday, system proposed delivery creation date as friday(2day minus as Saturday but since saturday is holiday , it take Friday)- that is ok.
Problem is in situation:
When material delivery date is on monday, system proposed delivery creation date as Friday(2day minus as Saturday but since saturday is holiday , it take Friday). Systematically this is ok but not physically as other plant has holiday on saturday and sunday , so if it get delivery on friday , they can't ship before tuesday.
Please suggest, how this issue can be resolved.
Regards
Sandeep Kumar

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

MD04 not creating a PR for parts

All,
In MD04 i have aplanned order that is set to start on 5/27/11. Not all of the parts are in stock for the BOM to be built for the planned order. MRP runs in a batch file every night but it is not creating a PR for the some of the missing parts. Can someone give me some guidance as to why the PR is not being created. I have reviewed the raw material that the PR is not being created for against the other raw materials in the BOM that PRs have been created and the settings are the same for MRP.
Thanks in advance for help,
Sean

Hello,
Please check
If entry in planing file is missing for this material.
MDAB - Planning file entries
How to use T-code: MDAB and MDRE
Also check above links.
Hope it will help. Please revert back.
Alok Tiwari

How to creat commitment for PO PR but not creat statistical cost for GR

Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
Ray

Hello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev

Jdeveloper 11.1.1.4 Could not create MAR entry for file

Hi
i am using jdev 11.1.1.4.i checkout code from svn to jdeveloper .
i tried to create EAR file for the application,but while creating EAR jdeveloper throwing some error message as shown below
find similar thread
JDeveloper Debugger Hangs
Could not create MAR entry for file [D:\JDeveloper\mywork\myAPortalApp\Portal\adfmsrc\oracle\webcenter\portalapp\pagetemplates\.svn\text-base\pageTemplate_swooshyPageDef.xml.svn-base], due to: MDS-01161: Reference "/oracle/webcenter/portalapp/pagetemplates/.svn/text-base/pageTemplate_swooshyPageDef.xml.svn-base" has an invalid character ".".
from the above message ,due to svn in the output folder ,jdeveloper is not able create MAR file entry .
i checked application properties for filter options ,jdeveloper has already has the filter "Exclude /.svn/"
can any one help me on this?
appreciate your help

Hi Aaron thanx for the reply.
i did not understand exporting from the subversion,but i did search in file for the svn there are two entires for .svn in portal.jpr file.
if i delete subversion connection from the jdeveloper and if i compile then it will create EAR file.

Server repository could not create function template for 'ZBAPI_EXPORT_SO

Hi all,
When i try to post a BAPI from R3 to XI i am getting this error.
Server repository could not create function template for 'ZBAPI_EXPORT_SO
This message was appeared in SM58.
Can anyone no the root cause of this ?

Hi Christoph,
Per the resolution of the CSS Ticket:
Parameters that are not mentioned in the SDN guide were needed in your particular situation.
The necessary parameters for configuring the MII side of the IDoc Listener are explained in the MII Help Documentation in the Client Properties section:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/a705b23c14532ae10000000a1553f7/content.htm
All others are described in the Message Listeners section here:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/content.htm
Can you please update this post to reflect your particular situation so the SDN community can benefit from your experience?
Kind Regards,
Diana Hoppe
Edited by: Diana Hoppe on Dec 9, 2008 9:06 AM

Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .

Hi Buddy's,
Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .And why we create receiver agreements at receiver side bt not sender agreement at sender side.
Wat Is GLOBAL Container ?, where it will Occur & wat is the functionality of that.

Kumar,
1) XI integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
2) When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
3) A Global container is like a place holder for variables. You can set a variable here and access it throughout your mapping and hence the name.
A good example for a gloabal container is a counter to countthe number of records in te target side.
Regards,
Arvind ravindran

Yoga 11 - can not create an account for the App store,

I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

VF04 - SDBILLDL - Invoices not created in background

A batchjob has been created for the program SDBILLDL.
The variant has been setup properly when testing it in the foreground.
A list of sales orders is displayed in the billing due list and it is possible to perform billing in foreground.
When running the program in background with the same variant, the invoices are not created.
This was not a problem a few days ago, but at some time, the background billing stopped working.
Do you have any idea on what might have caused this problem?
The sales orders have deliveries and delivery related billing is used.
I have also tested to use the old program SAPMV60S with a similar variant, which works fine in foreground.
But when running it in background, the invoices are not created.
Spool problem?

Hi,
Background jobs for creating billing docs has to be done using tcode VF06.
Check the following [thread|Background for billing job in VF06; for more info.
Regards,
Amit

Inspection lot not created on GR for production order

I want to create an inspection lot upon receipt from production. Task list is set up. Inspection type 04 is assigned in material master. But when I do the goods receipt for a production order, inspection lot is not created. In the quantity tab of material document, I see that the staus GR doc is 7(Inspection lot is created at inbound delivery). I don't know where it is coming from.
Please help.

I'm not sure what you mean by creating lot after receiving.
When you do a GR from production the proper inspection type is the 04 inspection type. Not 05. This is pretty standard SAP functionality.
Check the material movements for 101 (I assume you're using a 101 GR material movement), and make sure in config no one has deactivated QM for the material movement.
Then, make sure you start with a freash production order. Don't copy from a previous one.
FF

Delivery not created in background for VL10 or VL10BATCH

Similar Messages

Maybe you are looking for