Delivery Note not appearing in MIRO for DCGR

Hi Friends ,
I am facing a problem in MIRO . The Delivery Notes are not appearing for "Delivery Costs at GR"(DCGR) , while it comes for individual GR which u can see by Clicking the PO-History Tab . But when we check the PO-History in ME23 , there the Delivery-Notes gets reflected against DCGR .
The users are facing a problem because they are unable to determine which delivery Cost is against which GR ( as the Delivery Note doesn't appear ) .
Kindly reply as soon as possible , if any NOTES are to be applied or so .

Hi Sudha,
have you found solution for this prob? coz mine prob is about the same. but the different when they enter delivery note at material document GR at header, they put wrong number which is extra zero. i don;t know if this the factor coz invoice receipt not allowed to be process. i mean DCIR.
Regards
Aishah

Similar Messages

Migo reference document not appearing in miro for frieght conditions

Dear all,
I ahve done migo for a po and i have checked GR based invoice in PO.When i am doing MIRO i am not getting the migo reference number for frieght condition where as the migo reference number is appearing for base price.How to get that migo reference number for frieght conditions also.
thanks in advance
regards
vithal

Sometimes the the MIGO creator might have reversed the same. In such cases the reversal document may be with different number in the same series and both posted & reversed documents will not appear in MIRO. Since you might checking with posted document number, you are seeing the blank in MIRO. In such cases, just enter the PO number in MIRO, give date & reference number press Show PO structure button in the left corner. You will find the following screen
Expand the required once. The following screen appears. In this both positive & negative numbers with same reference & document type appearing are the reversed documents.
Hope this is clear

Delivery completed" indicator cannot be set for item 00001

Hi all,
I have done a inter company stock transfer order , with respect to that Order I made Outbound delivery and posted GR with respect to outbound delivery. I have done MIRO for PO for all the Item ,
Now I need to return some material to supplying plant for some reason, I tried to make GR (MIGO) against the same outbound delivery with movement type 122. the document is posted but when I tried to make complete delivery indicator it does not allow me to do so .
it says me
Delivery completed" indicator cannot be set for item 00001
   Message no. 06 848
Diagnosis
   You have set the "delivery completed" indicator for a stock transfer item.
system Response
   You can only set the "delivery completed" indicator in stock transfer items if
   o   the sum of the goods issue quantities in the supplying plant equal the sum of the goods receipt    quantities in the receiving plant.
   o   the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Regards,
Dhilipan.

I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator'

Profitability segment being derived again-in MIRO for Subsequent Credit

HI All,
Need help for below Warning message i could not able to post MIRO for subsequesnt Credit.
Profitability segment being derived again
Message no. KI350Diagnosis
You have assigned an profitability segment with the auxiliary account assignment PrCtr 5300MN0000. The profitability segment, however, contains the characteristics PrCtr 5300MN0000.
System Response
The characteristics of the profitability segment and the auxiliary account assignments must not contain different values. In particular, the profit center and business area must match.

Hi
As Waman said, there will be some substitution which is forcing PC into the line item.. Else, this problem wont occur...
If possble, switch off your subst and Post this entry..... See if it goes through
Br, Ajay M

Excise values not appearing in MIRO

Dear All
I have created a PO , Made GR Part 1,2 has been captured ,
Due to some reasons we cancelled the GR , then we made a new GR for that PO
Now i get in to MIRO i am not getting the Excise Conditional values , i get only my VAT values.
Kindly throw light on this
Regards
R.Rajaram

Hi,
Cancel the excise invoice which was posted at the time of previous GRN. Then again post the excise invoice with reference to new GRN Then the excise amount will appear in MIRO.
Regards,
Prashant

Not able to do GR for PO's , Delivery Completion Indicator Not Ticked

Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,

Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev

Baseline date not default in MIRO for Invoices posted against STO Pu.Order

Hi All,
Baseline date doesn´t default in MIRO for Invoices posted against an STO Purchase Order.
We are trying to post an Invoice in MIRO with reference to a STO Purchase Order for planning delivery cost.
Delivery cost in PO has not got the Vendor number because conditions are customized not possible to process manually so in MIRO the system asks to enter the Invoicing Party and then the baseline date.
The client requires that when the invoicing party is enter manually in MIRO, the term of payment should be pick up from Vendor Master Record.
Could someone confirm if this possible ?
Thanks and regards,
Laura

Hi Laura ,
The payment terms in Invoice are taken from PO only .
Refer SAP Note : 177224 for more details.
Regards
Ramesh Ch

Posted Excise duty not appearing in MIRO

Hello folks,
We are capturing Excise invoice in MIGO and then as per the vendors
excise invoice we change the ED in the captured excise invoice and then
post it. We have noticed that in some cases the exise duty posted in
J1IEX is not the same which is appearing in MIRO. first we assumed that
it is appearing only for the changed items, but then we found this is
only in case of some invoices and not for the all invoices of those
items.
please let me know what to do.
regards
Ashish

Why do you change excise duties while posting ? Vendor is a dealer ??

Delivery number not appearing in MD04

Hi Experts,
Delivery number not appearing in MD04.
Regards

Thanks Jp..
Order Created with 3 materials with 0ne qty each, delivery crated 3 materials but for two materilas delivery qty and picking qty is one for third material (material X) delivery qty is ZERO, overal PGI status Completed.
One material (material X) sales order qty is One.
Delievry qty is ZERO.
this sales order not appearing in MD04,
I have created another sales order with same material delievry not created this sales order number showing in MD04.
why its nt showing previous sales order.
i need solution urgently..
regards
Edited by: michelchn on Aug 6, 2010 11:46 AM

Table to Know MIRO for mat. doc.(MIGO) incase of GR based IV not checked PO

Hi,
I need your help to know the logic for developing one report in the below situation.
there is a Imported PO. GR Based IV is not checked.
initially customs MIRO has done it,
later inbound delivery taken,
then MIGO 103 movement done,
while doing 103 Mvt, system is asking commerical Inv No and Year. I have given the customs MIRO No.
later 105 mvt done. at this time inventory valuation and taxes and duties captured based on the Customs MIRO.
At this time, i want to know the customs MIRO No. against GR No (i.e., Material Document No.) Any table will provide this information.
Regards,
S Vasu

Dear Ramana,
Thanks for your reply. i already verified this EKBE table, it is giving only mateirla documents information, it is not giving any of the customs miro nos.
Please advise any other tables will help us.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Scheduling agreement delivery schedule not continue for a next month.

Hi.!
What are the setting I have to maintain so that delivery schedules are transmitted OR used for particular month not beyond that.(means not required to continue for next month.)
Thanks and regards,
Prashant

Hi,
You can limit the validity to date (e.g. 31.12.2008) you want in "Source list" via t-code ME01, then after 01.01.2009 system will generate the planned orders instead of the schedule lines in SA.
Regards
Tao

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

Delivery Note not appearing in MIRO for DCGR

Similar Messages

Maybe you are looking for