Delivery number for a billing document

Dear Experts
How to retrive or get the preceeding delivery document number from a billing doc.I have tried for VF05 but its restricts me by only specifying a single customer to be selected.I dont require this.
I require the list of billing docs generated within a particlar billing period and their respective delivery numbers.
The copy control settings in VTFL might have helped me but the reference number that was maintained was only POrder number.
Please comment

Hi ,
You can get this from the docment flow
Goto VF03 and give the  Billign docment number and click on Contro + F1
It willl take u to the docment flow.
There u can see the preceeding docment that were created for this Billing docment
If you want the docments  from a table , then goto VBFA table which is the table for Docment flow and
Give the Billing docment nmber and select the docment category as J and then u can retrieve all the Deliveries for that particlar Billing docment
Hope it is clear
santosh

Similar Messages

  • P.O number for a billing document number

    Hi Experts,
    From  which table we can find a PO number for corresponding billing document number(VF03)?

    hi RAVI,
    Go to T.code SE16
      enter table name VBRK-->enter
       billing doc type,billing doc no,s.org,d.channel
      execute
    waiting for reward points
    mcm

  • Delivery number for a material document posted

    Hi experts,
    I need to delivery number for the material document number posted,
    I tried to use the field XBLNR from the table MKPF
    but i see that the feild is empty in the case of inbound delivery
    why is it so.
    How ever i can get the data from VBFA ,but can any one tell me the reason why XBLNR is empty in case of inbound delivery.
    Thanks a lot in Advance.

    Hi,
    If you do GR w.r.t. Inbound Delivery No in MIGO then it will not update "Reference" field i.e. XBLNR.
    To update same with Inbound Delivery No, you have to do "Post Goods Receipt" from Inbound Delivery Document itself in VL31N or VL32N.

  • In Forms Unable to print output for particular billing document number

    Hi All
      I am working forms
       Here I am Unable to print output for particular billing document number, I am getting Error message like 'Graphic cannot be displayed'. 
    can anybody tell me the solution
    Regards

    Hi Chinna,
    Please check that the billing document may be using different logo and which may not be avilable or not fitting in the window. (May be graphic is over flowing the window dimensions)
    Lanka

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • Excise Invoice created twice for same billing document.

    Hi All
    Excise Invoice ( J1IIN ) has been created twice for same billing document in 1 or 2 cases.
    How is this possible,if possible what is the config  to restrict the same.
    Thanks in advance
    Samson

    I dont think its possible to EI twice wrt: single billing document.
    EI created wrt: Invoice which is created wrt: Delivery document. Then there will be only one material document with movement type 601. Through which qty will get updated in Rg1 register.
    This document once utilized, cant used again.
    re-check billing document, which billing document you are using & their settings in IMG.
    Regards,
    Reazuddin MD

  • How to cancel the delivery number in the billing due list

    Hi Gurus,
    My User has created the Consignment Fillup order and Dlivery for that order.
    Now User asking that the delivery number coming into Billing Due list (VF04).
    As you know all for Consignment Fillup there is no invoice. Please suggest me
    how to cancel the Delivery number in Billing Due list for above scenario.
    Br,
    Satish

    What you have faced is not at all an issue.  Its a standard behaviour only.  Though you are not generating commercial invoice here, you can generate (F8) proforma via VF04 in bulk.  Either you can generate one proforma per delivery or consolidate multiple deliveries into one proforma which it depends on VTFL copy control for the field Data VBRK/VBRP.   There if you maintain 001 or 007, you can club multiple deveries and if you maintain 003, one proforma per delivery can be created.
    thanks
    G. Lakshmipathi

  • Is there a way to complete a delivery without  creating a Billing document?

    We are supposed to complete a Delivery that is relevant for billing, but we want to complete the Delivery without creating a Billing document. Is there a workaround for this?

    Hi Jay,
    You requirement sounds different. Could you explain the Business Scenario so that this owuld be helpful to every one.
    In standard SAP this funcyionality is not possible. As anything you deliver and do PGI you need to get back your money and hence a delievry is not complete OR Inprocess till you bill the same.
    But this requirement might probably can be achieved using some USER-EXIT / Requirements. But it would be more appropriate to give some suggestion only after we understand the business scenario / requirements.
    REWARD IF IT HELPS
    Regards
    Srini

  • How to get the delivery number for the sales order

    hi
    how to get the delivery number for the sales order

    Hi,
    1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
    2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
    Hope it helps...
    P.S. Please award points if it helps...

  • How to get general account for a billing document ( BSEG) ?

    Hello,
    For a billing document to a client , We need to get the general account for each item of the invoice . We based on the field XBLNR of table VBRK to select a document from BKPF with condition : VBRK-XBLNR = BKPF-vbeln . If yes we will get from table BSEG for bseg-vbeln = bkpf-vbeln and bseg-posnr = vbrk-posnr . then get HKONT.
    But as you know BSEG is a cluster table, Select directly from this table is extremly long and seems impossible in our case. Could you please show me the way to do this ?
    Our main purpose is to get HKONT ( General account ) for a  billing document .
    Thanks in advance for your help

    Hi  Hoa Binh Xanh,
    Why don't you look into tables BSAD and BSID (Transperant Tables) rather directly hitting BSEG ( Cluster Table)
    Pass VBELN (Billing Document) in above two tables and get the doucment numbers and then if you need further info hit BSEG with the data you got from BSAD and BSID
    OR else Pass KOART = 'D' while selecting data from BSEG it will help in improving performance
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • An accounting document is not required for this billing document

    Hi,
    While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
    Diagnosis:
    The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
    But the net value is coming in the sales order and alsi into the Billing document.
    gurus plz help me.
    regards,
    ragesh.

    Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
    Also please check, the posting block is activated. if it is, please remove.
    Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
    Please let me know, whether ur problem solved..
    Reward points if useful..

  • FI Document Summarization for SD Billing Documents

    Hi Gurus,
    Appreciate if you can please let me know the configuration and process of FI Document summarization for sd billing documents where, there are more that 10000 line items in one billing document. And how can we do clearing of multiple accounting documents against one billing document when we recieve payment.
    Thank You

    Hello,
    The summarization of FI items for SD billing documents are done in transaction OBCY. The steps to configure it is explained in note 36353:
    1) Enter in transaction OBCY
    2) Inform Reference Transact. VBRK
    3) Add the following fields:
              BSEG     MATNR
              BSEG     MEINS
              BSEG     MENGE
              BSEG     PAOBJNR
              BSEG     POSN2
              BSEG     VBEL2
              BSEG     WERKS
    Be informed that the content of those items will be deleted in FI document.
    The information above will help you to configure summarization of FI items for SD billing documents.
    Kind regards,
    Cintia.

  • IDOC for Invoice/Billing document

    Hi Experts,
    Some of our customers want us to send electronic but no paper invoice to them in the coming week.
    I've investigated the process, steps are:
    1. Do some configs for message type of billing document
    2. Create KU partner profile and set outbound parameters, include Port / Basic type / Message type / Process code.
    If you have experience about this (IDOC for Invoice/Billing document) ? please kindly share the detail for me.
    Thanks in advance.
    Regards
    Sam

    Hi,
    Please check [https://supplier.intel.com/static/ap/forms/imp_gid2.doc|https://supplier.intel.com/static/ap/forms/imp_gid2.doc] this.
    This might help you.
    Thanks,
    Abhijit

  • Updation of COGS in CO-PA for posted Billing Documents

    Hi Experts,
    We have observed that in CO-PA COGS was not getting posted for posted Billing Documents. The reason which we found was standard cost was not released for that product. Now we have released the same and COGS values are getting posted into CO-PA.
    We want to post COGS value for posted Billing Documents which was not posted before. Is there any standard transaction for this?
    Regards,
    Pawan Kumar

    Hi,
    Use KE27. The documentation explain the details.
    Benni

  • How to get po number based on billing document number

    Hi every body
          how to get a po number based on billing document number
    thanks in advance.
    sekhar.k

    Hi,
    Check this field VBRK-BSTNK_VF.
    Regards,
    Satish

Maybe you are looking for