Delivery number not appearing in MD04

Hi Experts,
Delivery number not appearing in MD04.
Regards

Thanks Jp..
Order Created with 3 materials  with 0ne qty each, delivery crated 3 materials but for two materilas delivery qty and picking qty is one for third material (material X) delivery qty is ZERO, overal PGI status Completed.
One material (material X) sales order qty is One.
Delievry qty is ZERO.
this sales order not appearing in MD04,
I have created another sales order with same material  delievry not created  this sales order number showing in MD04.
why its nt showing previous sales order.
i need solution urgently..
regards
Edited by: michelchn on Aug 6, 2010 11:46 AM

Similar Messages

  • Deliveries not appearing in Md04

    Hi,
    a few deliveries are not appearing in Md04. The checking group is "KP". For this checking group in the config, the total sales req and total delivery requirements column is blank. Also the "no check" indicator is flagged.
    Is it because of above config settings that deliveries are not appearing in Md04.
    I think the above config settings are for availiblity check and so the requriements will pass on and the deliveries shud appear in Md04 ?
    regds

    Availability Check KP will not pass on the requirement to MD04.  You can either maintain 01 or 02 in material master.
    thanks
    G. Lakshmipathi

  • Sales orders not appearing in MD04

    Hi,
    Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could  be the reason and how to resolve such thing.
    regards
    sachin

    sachin arora wrote:>
    > Hi,
    >
    > Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could  be the reason and how to resolve such thing.
    >
    > regards
    >
    > sachin
    Hi Sachin,
    MD04 is the stock requirement listing.
    Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
    However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
    For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
    Once you save the sales order for such a material it will get listed in MD04.
    Hope it helps.
    Thanks & Regards
    Abhishek Swarup

  • SchAgr not appear in MD04

    Hi,
    I have a user, who created a Sales SchAgr but it was not appear in MD04. This is only happened to a few newly created material. What would be missing?
    Thanks.

    Hi Jan,
             In VA31 you will create schdulling agrement,in MD04 you can see the requirement transfor means when the order material is not available system will transfor the requirement to MD04.
       In your case may be the material is avilable so for that reason it will not comming in to MD04.

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Sales order not appearing in MD04

    Hi,
    Sales order is not appearing in MD04 screen some times. I tried with different MRP types and Different strategies, But I could not found the solution.
    Thanks in advance

    Hi Bhagavan
    1) Please check the Item Ctaegory of the sales order that you created
    Is it TAN (or) TAS , Please check & revert
    2)Also, check the material & plant which the sales Order is created, any MRP AREAS that you have in your Plant ?
    3)In MD04, Check the following
    Material :
    MRP AREA :
    Plant :
    Check that you sleeted all the above points Correctly ?
    Revert for any other info.
    Regards
    BRSR

  • How to delete a delivery number/note

    Hi All
    How to delete a delivery number/note
    Thanks for the help
    Rajendra Prasad

    Hello,
    Start with checking the document flow. If the invoice has already been generated to that specific delivery you need to cancel the invoice before you delete the outbound delivery.
    Step 1: T Code VF11 helps you to cancel billing document.
    Step 2: Then use T Code VL09 and reverse the goods movement by entering the values in the fields. Once you reverse the documents then you can delete the outbound delivery in VL02N under menu bar Outbound Delivery u2013 Delete.
    Step 3: If PGI has not done you can cancel the outbound delivery by editing the picking quantity to zero. If Warehouse Management installed then you can cancel all the transfer orders before you delete the outbound delivery.
    If invoice has not created and PGI done then proceed with
    step 2.
    If  PGI has not done and Picking completed then proceed with step 3.
    Regards,
    Vamsi

  • STO po number not appearing in VL10B transaction

    Dear Guru,
    I have created STO PO with inter plant transter and shipping tab is also coming as per required in STO
    but for further operation in VL10B transaction STO PO number is not appearing
    Pl let me know if i have missed anything important.
    Regards,
    Vimlesh

    hi,
    Please try this way with check points
    1.delivery date in PO and make sure it is in the delivery creation date range of VL10B
    2.Stock of material should be available in supplying plant.
    3.Enter PO number in Purchase Orders tab (T code VL10B) and execute
    4.In next screen,Select line and click on Background button.this will create a delivery.
    Hope it would work...
    regards,
    Vineet

  • Sales document number not appearing in Work Item.

    Hello gurus,
         I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
         Please suggest a solution.
    Regards,
    Dnyanesh.

    Hello All,
         Thanks for your reply.
    I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
    But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
    Regards,
    Dnyanesh.

  • PO number not appearing in Purchasing Document number

    Hi
    I have posted a MIRO. PO number: 4500000013. Now when i see in FBL1N & vendor open items, PO number does not appear in Purchasing Document field. Let me know how to bring the PO number.
    Edited by: Deepak Agrawal on Oct 8, 2009 11:50 AM

    Hi,
    The display of the purchasing document number for customers/vendors via the line item display is not possible. However, you can branch from the vendors/customers line item display into the document overview and there display the purchasing document number for the individual G/L account line items.
    Regards,
    Eli

  • Number not appearing when calling landlines

    I have a subscription for an American number with months to go, but when I call a landline in the US the number is not appearing on the caller ID like before.
    This is an error that needs to be fixed.  

    MatthewLieblong wrote:
    Agreed.  This is ridiculous that you pay for a US local number, which works, but you cannot use it as your caller ID number.  That was half of the point of getting the online number, I never would have imagined it didn't show up as your caller ID.  So basically I can never get anyone to answer when I call because it looks like some crazy California area code and/or hidden/private/telemarketer phone number in the caller id of whomever I am calling.
    THIS NEEDS TO BE FIXED.  It should be default set to use your online number as your caller ID, and you could change it to a mobile number or otherwise if you wanted to afterwards.   Can someone from Skype fix this, or at least explain why?  If they don't, I will be searching for other web phone solutions when my subscriptions expire.
    Skype does not automatically use an Online Number for Caller ID, since that is a privacy question best left to Skype users.  First of all, not all Online Numbers are usable as Caller ID.  Next, some users may have multiple Online Numbers that are eligible for use as Caller ID.  In that case, which number should Skype select? 
    If you want to access the Caller ID settings, one way to do that is to log into your Skype account here on the Skype web site.  Use the "Account" link at the top of this page, and you will see the current Caller ID settings.  From there, you can change it.  US Online Numbers can be selected as Caller ID, as can Online Numbers from a few other countries (the UK is one of those other countries).  Online Numbers from certain countries (Australia and Mexico are two of those) can't be used as Caller ID when calling telephones from Skype. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • My Phone Number not appearing...

    My phone number is not appearing in contacts or settings as other users claim to be seeing. I just noticed that iTunes shows my Phone Number as N/A on the summary tab. I could have sworn that it listed my number earlier.
    Any ideas?

    Power off/on. My appeared after doing this.

  • PO not appearing on MD04

    Hi Gurus,
    I have a specific PO that it is not appearing on my MD04 list. The PO does not have MIGO and MIRO done, does anyone know what could possibly be?
    kind regards
    Oliver F

    Isn't possible that this is a PO with account assignment? Please give information on it.
    Vivek,
    Subcontracting PO should appear in MD04. But e.g third-party PO not (OSS note 21350).
    Regards,
    Csaba
    Edited by: Csaba Szommer on Feb 17, 2009 12:15 PM
    Edited by: Csaba Szommer on Feb 17, 2009 12:30 PM

  • Delivery number not invoiced

    Hi..
    How do I get the delivery number that has not been invoiced?
    Thanks.

    Hi,
    You can get delivery no from VBFA table..
    select vbelv from vbfa where vbeln is initial and vbtyp_n = 'J'
    regards,
    paras

  • Sales order Number not appearing in CO-PA report painter

    Hi
    I have prepared profitability report through report painter through t-codes KE34 and KE31-
    Characteristics I have chosen is Sales order No/Plant/sales organization/product and customer-
    In the report Sales order Number is not appearing?
    We are able to see plant number/sales organization no/product no and customer no-
    Where I have committed mistake
    Thanks in advance
    joseph david

    HI,
    In order for you to see Characteristics in KE34 form definition, they have to be defined as 'Segment level' in KEQ3, as also metioned by Christian. However, it is not advisable to define 'Sales order #' as a Segment level, considering that 'Sales order #', changes frequently and also owing to performance issues with huge number of Segment level records which gets created in the course of time.
    If you want to report based on Sales order, then please consider using line item form/report KE94/KE91 or check if KE24 is sufficient.
    Hope this helps.

Maybe you are looking for