Delivery number range taken is different from customizing delivery type

Folks,
I have the following situation:
Delivery type has number range 17/18 which is SAP standard. During creation of deliveries, system take a different number range, i.e. a not SAP standard. Where else then in the delivery can we influence the number range determination?
Thanks.
MdZ

The normal behaviour is that in VN01, you would be maintaining the number ranges for all SD documents and assign the serial number in the respective documents. In your case, for delivery, in OVLK, for your delivery document type, the number should have been assigned.
In case you have assigned but still, system is not considering that, then user exit would have been applied.
thanks
G. Lakshmipathi

Similar Messages

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Document Splitting - Business trans. variant differs from Customizing

Dear experts,
When doing General Ledger Simulation and selecting Expert mode, I see in the parametes, that Business Transaction has a value of 0000 when the customizing for the document type KZ is 1000.
In the Document Display area, there is a message "Business trans. variant differs from Customizing".
I donu2019t know why different Business Transaction is being used.
Best Regards
Jorge

Please refer to OSS note 1358696 for the usage of the business transaction "SKIP" and the mentioned message.
Regards,
Bernhard

Number Range for PR converted from MRP Run

Dear Experts,
We are experiencing problems with our number range when converting our MRP generated planned orders into PRs. We convert planned orders to purchase requisitions using MD03. We have 1 Plant with 2 MRP Groups which assigned to specific document types and number ranges as well. For example:
In T-code OMI8:
Plant AAAA --> Number Range 1111111111
(Because 1 Plant only able to have 1 number ranges)
In T-code OPPZ:
Plant AAAA, MRP Group : A01--> PR Document Type : ZZZZ
Plant AAAA, MRP Group : A02 --> PR Document Type : XXXX
In T-code SPRO "PR Document Types" and "PR Document Ranges"
PR Document Type : ZZZZ --> Number Ranges 1111111111
PR Document Type : XXXX --> Number Ranges 2222222222
When I run MD03, the result is:
MRP Group : A01 --> PR Document Type : ZZZZ --> Number Ranges : 1111111111
MRP Group : A02 --> PR Document Type : XXXX --> Number Ranges : 1111111111 (Why the number ranges is not 2222222222 ???????)
Does anyone have idea? Please help. Thanks a lot..

Hi Mallinath,
thanks for your info.
Note 46919 has been implemented in the system, and also i have maintain Tcode - OMI3:
* Object Type : 2 (PR) --> PR Document Type : ZZZZ --> Internal number range : 1111111111 --> external number range : " " (blank) --> Reservations : 01
* Object Type : 2 (PR) --> PR Document Type : XXXX--> Internal number range : 2222222222 --> external number range : " " (blank) --> Reservations : 01
But still system pick wrong number ranges (1111111111, instead of 2222222222 ) for PR Document Type XXXX if generated from MRP run.
Do you have any other idea? Thank you.

Automatic Number Range Determination in grouping by custom BP Roles

Hi,
I am not aware whether we can automate the grouping (Number assignment) while creating BP with different Roles ( Instead of asking user to choose the number range object while creation of BP with different roles)
Scene: BP Creation selection for "Prospect" always trigger "xy" object defined for specific number range( No Other Grouping Selection can be allowed).
I am looking for inbuilt functionality with in CRM 5.0...Please let me now ...
Points & Best wishes are always there...............Regards, Ashok

DearAshok
You can create number range and assign it BP group and only one can be made as standard or u can call it as defaulf no. but for different BP roles it does not follow R/3 procedure which flows from account group here we need to select manualy out of the list of grouping arrange the reason is
usually R/3 will be leading CRM so in R/3 we would have maintained internal no. range and here we need to maintain external no. range and there can be different ranges for different groups
for eg. in R/3 we maintain all the customer irresepective of person, sales org.,group as same customer master
but in CRm we maintain them according to Person , org. or group so here we are classifying the customers so if required we can use std. no. range or we can distingauish by no. for easy idenfication suppose if it si person it will start with 1000 & org with 2000 like that
this is as per my knowledge still not convinced mail me i will respond to u @ [email protected]

Delivery Number range

Hi
I have assigned the below number range to my warehouse for creating deliveries.In these there are many deliveries which has been deleted/archived for some reason.Now can i reset my number range for delivery creation?Also want to know if we reset and the delivery exists in the system will it throw a dump or error message saying that the delivery already exists ?
From To Current number
0000000001 0004999999 8000
Please let me know on this.
Thanks

not recommend to RESET.
The system cannot have same delivery note number. It will "UPDATE TERMINATED" => cannot save delivery note at all.

How to change Number range to Contact Person in Customer Master Record

Dear all,
We are maintaining contact person details under contact person tab in customer master record.
Currently contact person is being created using VAP1 transaction.
Can we automate this contact person creation by entering the data in contact person itself?
and where can we change the number range of contact person.
I have searched a lot to find the solution for this. Please help me to resolve this issue. Your suggestions will be highly appreciated.
Best regards
Venkat

Hi Venkat,
To your first question: "Can we automate this contact person creation by entering the data in contact person itself?"
Yes, you can enter the contact person directly in the customer master in the contact person tab. A number is generated automatically.
To your second question, go to transaction SNUM, and there use object "PARTNER". Here you can configure number range for contact persons.
Hope this helps,
Regards
Nikhilesh

Number range based on different business area for same document type

Hi All,
The scenario is my client wants to give the different number range for a particular document type based on different business area.
Is there any user exit by which I can restrict the same.
Regards,
Meenakshi

Hello,
Document number ranges are created per company code and fiscal year. You cannot create / restrict the document number ranges per business area.
Business areas a independent of all organizational values, they cut across all company codes.
Regards,
Ravi

Internal HU number range for 2 different plants

Hi,
I have one plant with WM-HUM and internal number range for HU is 1.
Now implementation for a second plant (same controling area but different company codes), with his own WH number, is going to use WM-HUM.
I'm wondering what internal number range should be used for plant 2:
- same number range than P1 then no need to create new packaging material types. Just check if both plants accept to share numbers
- different number range to fastly identify which plant belongs to the HU number (without using HUMO)? But need to create new packaging material types.
Are there other SAP impacts of these solutions?
I have to precise there will be stock transport orders with deliveries between both plants.
Thank you.

Hello Cathy,
I would suggest to use the same number range considering the scenario you have mentioned .
Cheers
Kaushik

How to confg the number ranges i.e started from an alphabet

number rages started froman alphabet
ex:aa123...... for an production order

Hi,
You need to define the order type for a production orders in tcode opjh
For this order type you need to define the number ranges as external number range.
The defined number ranges should not overlap with the existing ones
Reward points if useful
Regards,
nandha

Return from customer movement type

Hello,
We use in our system 653 mov.type when we return goods from customer.
Usually we create the return order with reference to the original customer order and the original customer order is MTO (make to order) . When posting the 653 mov.type the system take the cost of the material (VPRS) from moving average price of unrestricted stock.
My question is : in cases that my return customer order is with reference to original customer order, is it possible to configure a movement type (or other way) that the system will take the cost from the original customer order and not from the cost in unrestricted stock and in advance it will affect the moving average price ??
I will try to explain by an example:
I have in stock 10 pieces each for 5 $,
My return order has 4 pieces that has cost of 8 $ in the original customer order.
The system behavior today after returning the stock with 653 mov type:
I have 14 pieces with cost of 5 $ - no change in moving average price and VPRS cost for profitability analysis is 5 $
The desirable behavior according to my expectations:
I will have 14 pieces with cost of (50+32)/14=5.8 u2013 the moving average will change according to cost in original customer order 8 $ and VPRS cost for profitability analysis is 8$.
I hope I made my self clear enough
Regards
Idit

Hello Kishore,
Thanks for your answer.
I can understand the idea that MAP changes only in case of Purchase of material not at time of sales returns.
But I want to give you a case that causes problems in our view:
Most of my sale cases are MTO, that means that I buy for order and therefore my MAP will not be affect.
Example: my MAP 3 $ I buy to order for 5 $ and when I will do GR it will not affect the MAP (101E)
When I will return the goods (653) I want that the cost from vendor (5$) will affect the MAP because this was the real cost from my vendor but when I return the stock I return it to unrestricted stock.
I have cases that I transfer sales order stock to unrestricted stock and the MAP is change according to cost of sales order (411E/412E) u2013 it's the same in my logic - the MAP change according to the real cost from vendor.
I will be happy to have your response.
Kind Regards
Idit

When I retrieve returnpack from customer, stock type should be blocked

Hello,
When I retrieve returnpack from customer, I want stock type should be blocked. When I use standart movement type 622, stock type is unrestricted use. Are there any way for this? I couldn't find any movement type which retrieve returnpack stock from customer stock (for example 622v) to storage location stock (for example 622).
Best regards,
Yasar Unalp

BADI ME_PROCESS_PO_CUST .
here you can add the Logic .

Trace the reference Standard movement type from customized movement type

Hi,
In my system there are few customized movement type.
Can I know which Standard movement type was used as reference to create the customized movement type.

try table t156 table .. put your mvt type and see the BUSTR field for the reference mvt

Using a different TIME range that is different from the default TIME dim

Hi all - this is my first post - so please be gentle!
I am busy writing an EVDRE report on an application for which I need to use a different time range than what is currently the overall time dimension for all our other applications.
Currently the overall time dimension is set for MAR to FEB (Financial year). I now need to do a report for - OCT to SEP reflecting the YTD values?
The report also calls for having variable A compared against variable B over the extent of this period (OCT to SEP -> YTD). So in essence I will not be displaying any PERIODIC values but rather just the YTD values.
How can I do this without having to resort to a manual entry of each month's TIME dimension details and still ensure the report dynamically changes when I do an EXPAND?
I am using BPC 5.1 SP3 on Microsoft Office 2003.
Kind regards
Pieter

Well, without seeing the report and the setup, my suggestion is to leverage the EVTIM function. If your columns are static, but the user selects a period for the report, you should be able to set-up the function to build the 2 sets of 3 months. The EVTIM function simply references another time value, and adds up or down at a specific level as a member for use in the column (or that is where I would use it).
Does that make sense?

Number range for external id for inbound delivery in SAP MM

Hi All,
I have an issue wherein user is not able to see the inbound delivery if external id is exceeding 10 digits..
Example :- supplier has maintained EXTid- 1237464123-1. For this we cant see inbound delivery.
but in SAP when we enter 1237464123 we can see the inbound delivery.
can anyone tell me how to resolve this issue... ? it is getting CRITICAL
Thanks ,
forum shah

Hi,
Thnx for the info.. but the issue here is that the IDOC is not created bcz GR is done manually ie thru' VL32N.
So i dont understand if the system allows the usage of special character for external id.
When i tried to create the External id using special char in TEST system , i could create it. I dont know abt production...
wht is the next step to be taken...
Thanks,
Forum Shah

Delivery number range taken is different from customizing delivery type

Similar Messages

Maybe you are looking for