Delivery problems BIG problems Need help

I am a very good customer and for the first time I went online to purchase items I put the following shipping address Exp: SE 28 St MA 44401 It was a mistake it was suppose to be SE 28 Av Now the address show SE 28 st 44416, yes I put 28St instead of 28av, but I never put 44416 Now while the package still in transit, I called UPS to ask them to reroute the package the answer: Best Buy needs to do that, I asked Why? Reason an extra $10.00 will be charge to the shipper and we need there permission. After over 5 hours of emails and aggravations no ones want to help at Best Buy online. I offer to pay for the mistake and it's not even an option. To top it off , if I never receive the packages I loose everything!!! This is unbelievable, frustrating and makes a very good client mad..... very mad. It takes only one call from Best Buy to reroute these items. Instead they choose not to call even if I pay the extra charges. How's that possible !?!?!?!?!? Please is there someone there to help If there is anyone at Best Buy reading this message please do something about it, Yes it is a mistake a small one and 5 minutes of your time would correct everything. We are running out of time delivery dates in 2 days. And if someone else can help me to post this at the proper place Please let me know.

More than likely, the package will go back to BB. Hopefully, they will contact you for the correct adddress. If you don't get your package, you may need to cancel the charges on your credit card.
Gee, I feel old. I bought a computer when 20 meg drive was a big deal.

Similar Messages

Z77A-G43 Problem | Big Ultra need help :(

Hello sorry for my bad English i'm French ^^'. Ok, I have a motherboard Msi z77a-g43 and I put a password for my bios.. I lost this password so but I search in the internet how to unlock password... I removed the battery in my motherboard and my motherboard is locked :( He show a message (Error) : Warning!!!Please insert USB key press any key to check. Please help me but I sad .
Thomas,
thanks.
My config :
MSI Z77A-G43
Intel Core i5 3470
2x4 GO Ram 1600 Mhz G.Skills Ripjaws
Windows 7 Ultimate 64 Bits
nVidia GeFore GTX 650 by Asus
Corsair CX500 Bronze 500 Watts

Contact MSI. The forum does not assist in password hacking or bypassing. Have your proof of ownership handy as well.
>> Contact MSI <<

Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

http://support.apple.com/kb/HT1808
Regards.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

Using 2006 iMac running Mac OS 10.6.8.
My iTunes App (11.3.1) will not launch.
Upgraded to iTunes (11.4) but problem persists.
Need help.

I have no answers for ya, but I do have the same problem, so we are not alone in this.
My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
Any thoughts?

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

I have a REAL problem that I need help with

many thanks to kglad for all his help last week with a problem but it hasn't fully sorted it out. I have a site with 908 buttons. Basically a person clicks a button, makes a donation (through paypal) and then that button gets their name displayed when the mouse hovers over it. Essentially the button becomes the property of the person who makes the donation. The problem I need help with is how to disable each button when someone clicks it. Disabling a button isn't the problem. I need it disabled only when the person has made a valid donation. Each button has a unique instance name (b001 - b908). There must be a way.
Many thanks in advance.

I can't get this to work at all. At this stage, I'm considering a complete restructure of the site in dreamweaver.
I would love to be able to complete it in actionscript though as I would be learning something new.
When a user clicks a button, and goes through the paypal process, I need the clicked button to be disabled.
It has to be such that it gets disabled only when a user has made a donation through paypal. For example, plenty
of people may just click on the buttons as they are checking the site out, without any intention of using the paypal
facility. This is just human nature. Obviously, I don' t want any buttons disabled under these circumstances.
I was thinking, do I need a statement such as .......... "on returning from paypal, disable the clicked button"
Or is it just a case of......... "on returning from paypal, remove the event handler"
Or is it something completely different, I require, (please don't say a brain would be helpful).
Is there some generic code out there that could help me out please.

Problem burning DVDs, NEED HELP QUICK

Hey,
I need help as soon as possible. I am using iMovieHD 5.0.2, along with iDVD 5.0.1. I have made a movie about 8 minutes long and all in all it totals 7.68Gigs, and i've tried burning it to a dvd. I did all the steps it says to, going to Share, sharing it with iDVD, then trying to burn it in iDVD. Yet whenever it asks me to insert a recordable dvd, i do, and the computer fails to recognize it. I am using a DVD-R, 4.7GB discs, 4x. I then realized that the movie i was trying to burn was larger than this disc, which might be the problem. I then created a 200mb movie and tried, but the same problem happened. My G5 is not recognizing the blank dvds, yet when i insert a dvd that was made a while ago from a different source, yet the same type of dvd, it plays fine.
The problem seems to be in recognizing the blank DVD, and im pretty sure that its compatible with this computer, being that it plays when theres already a movie on it.
Can someone please help me quickly, this is for a production company and we're losing out every day that i dont get this done. Thanks a million.

I don't have an answer, but as an initial diagnostic step, try loading a blank DVD while iDVD is not running. First open your System Preferences and select the CD/DVD icon. Make sure the options selected do not say "Ignore". Then load a blank disc. Depending on your preferences, you should get some sort of reaction - either a burn window opens or you get a prompt asking you what to do. If there's no reaction from the Finder, it would indicate that the drive is not recognizing the blank DVD. This would be either a hardware or a media compatibility problem. Only way to tell for sure is to run out and try a different brand of media.
- Andy
PowerMac G5 dual 2.5 Mac OS X (10.4.4)

Toshiba HDD/SDD ALERT! - anyone having the same problem? I need help =/

Okay, so I barely got this new laptop on Christmas and for several weeks now I've been having problems. My internet browser keeps saying (Not Responding) everytime I use it, which I think is due to this problem.
I keep getting a pop up that says this :
Disk0
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
I've backed-up my stuff already, but it still continues to say that. Anyone have any idea what why? and what I can do to fix it myself? it has been bothering me because it is the first thing that pops-up when I turn on my laptop. Thanks for reading and thanks for any help that I can get! Hope others that are having the same problem can get some help from my post as well!

10 views

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

Big problems with IMac-need help

I have an older model iMac G5 that my daughter has been using on week-ends when she comes home from the local college. She said that she was having a lot of problems with Safari quitting, getting weird messages with MS Office and kernel panics. I decided that the best thing to do would be to erase and install Leopard. During the installation process I got a message that Leopard could not install due to a problem with the base system. I then tried to install from the restore discs (which were backups that I had on hand since I couldn't find the originals) and from a Tiger install disc. I got errors each time. Now there was no longer an operating system on the iMac. I took it to the local genius bar. The genius seemed kind of frazzled since he was helping several people, but he seemed sure that it was the hard drive because of the kernel panics and the fact that he couldn't install anything onto the computer from an external firewire drive.
I purchased a new hard drive from Amazon and a friend who is very knowledgeable about these things installed it for me. We still couldn't install an operating system. We then installed it using Target Mode by putting the Tiger DVD on a Powerbook. I then proceeded with Software Update. I had no problems with applications like iTunes and DVD player. However, whenever I tried to upgrade the operating system I got this message "The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "Apple". I used Disc Utility with the Tiger DVD and it showed no problems.
So, there is obviously something really wrong. I have no idea what it is. Any ideas out there? Should I take the iMac back to the genius bar? I don't want to spend a lot more money on it, since it is just used on week-ends when my daughter is home. Thanks.

It could be any of those things, but likely is the motherboard. Take it in and have Apple look at it.
Let us know what they say, please.

Im having a big problem and I need help!!

Hi everyone.I have a Ipod 4th generation and for some reason when i connected my Ipod to my computer Itunes did not appear which is the first issue.The second is my Ipod wont sync,but it will charge.Thirdly when I remove the USB cord to sync/charge the Ipod the computer shuts down?.Please someone help!! I did the Itunes diagnostics and this is what I got: Microsoft Windows XP Professional Service Pack 3 (Build 2600)
HP Pavilion 061 * a1330e
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.1.3
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 336DD**8F2
Current user is an administrator.
The current local date and time is 2009-06-15 20:16:30.
iTunes is not running in safe mode.
Video Display Information
ATI RADEON XPRESS 200 Series
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {17BF0CA2-*-EF0D48D8B62B}
Description: Realtek RTL8139/810x Family Fast Ethernet NIC - Packet Scheduler Miniport
IP Address: 72.227.229.152
Subnet Mask: 255.255.248.0
Default Gateway: 72.227.224.1
DHCP Enabled: Yes
DHCP Server: 10.66.0.1
Lease Obtained: Mon Jun 15 20:10:44 2009
Lease Expires: Tue Jun 16 19:45:12 2009
DNS Servers: 24.29.103.15
24.29.103.15
24.29.103.16
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-06-15 20:13:40.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: TSSTcorp CD/DVDW TS-H552D, Rev HP06
Drive is empty.
** iPod/iPhone Connectivity Tests **
iPodService 8.2.0.23 is currently running.
iTunesHelper 8.2.0.23 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller
Standard Universal PCI to USB Host Controller
Standard Universal PCI to USB Host Controller
Standard Universal PCI to USB Host Controller
Standard Enhanced PCI to USB Host Controller
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.2
Serial Number: 6U840LV92ME
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
Message was edited by: I dont know what this is xD
Message was edited by: I dont know what this is xD
Message was edited by: I dont know what this is xD
<Edited by Host>

What version of Windows are you using?
Does it meet the minimum requirement which is Windows Vista or Windows XP Home or Professional with Service Pack 3?

Big problems and I need help.

I tried registering but was told an account with that email or password already exists? Really? That is highly unlikely. Anyway, I am trying to get help to stop my Mozilla desktop page from increasing the font willy nilly, How do I stop this, get back to smaller font and why is this happening in the first place? I am doing nothing and suddenly the font goes crazy.
Also, it is extremely difficult to contact any assistance for Firfox.
Elsa
[email protected] or [email protected]

Make sure that your not zoomed your website.
Press CTRL + 0 = > Normal mode.
*https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use

CRASHING PROBLEM! Seriously need help, CS4 driving me crazy!!

Adobe Photoshop CS4 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sounds like a common problem enough eh? Yeah? Well no, and this started happening when I began to practice Vector art with masks and the good ol' pen tool three days ago. It happens RANDOMLY, may happen 5 minutes in, may happen 15 minutes in-- whatever the case it happens at least 10 times a day and it is incredibly frustrating. A lot can happen in a minute when you haven't saved. By the way my document is only 1680x1050 resolution, 75dpi, and is only 7mb big.
I have had Adobe Photoshop CS4 since November, it was okay--my photoshop 7 would not install on vista so oh well! Photoshop CS4 is pretty nice, after disabling vertical sync to prevent brush lag.. anyways fellas, to the point.
My Computer specs:
Intel Core2 Quad q6600 @ 2.4ghz/core, 4mb cache
4.0gb (Actually 3.3gb being read, damn 32bit)Ram 1100hz, I forget latency?
Nvidia Geforce 9800 GTX superclocked 780mhz
Seagate Harddrive SATA 7200rpm
Wacom Bamboo Tablet 6x4
SO! My computer is not the best but it is certainly rather powerful! So what's going on? I have Norton protecting me, no viruses or spyware, and I have not installed anything recently that would affect it besides Left 4 Dead but that was 3 weeks ago (awesome game btw, superMEIKO is my steam ID if you want)
Here's what I tried:
-Set page file to minimum 4gb to maximum 14gb.
-Uninstalled (completely, no registry files leftover or w/e) all drivers and photoshop and everything-- then reinstalled with everything up to date
-Updated drivers for wacom tablet
-Tried the user administration thing, where you change user accounts, didn't work
-Disabling everything non-microsoft in my startup and services, nothing
-Overclocking my graphics card--just in case, nothing
SO! My experts, please help a fellow photoshopper out! I am suffering here!
Thanks for reading,
MEIKO

The most common cause of semi-random crashes we've seen is bad fonts (especially in 64 bit, where one of our attempts to work around bad fonts has a bug on 64 bit only).
What OS are you running? And are you using the 32 or 64 bit app?
We have also seen some drivers cause repeatable crashes, and the driver will be named in the crash report as the current module when the crash occurs.

Problem with routing - Need help

Hello,
I need a little direction with what I think is a routing problem. Any help will be appreciated. My setup is as follows:
Cable Modem
27.177.21.9
WAN - Gi0/0
27.177.21.10
Cisco 2901
LAN - Gi0/1
192.168.1.250
Client
192.168.1.10
The Problem
Router can ping LAN interface
Router cannot ping WAN interface -X
Router can ping Cable Modem
Client
Client can ping LAN interface
Client can ping WAN interface
Client cannot ping Cable Modem -X
Here is my routing table:
Gateway of last resort is 27.177.21.9 to network 0.0.0.0 (this is my cable modem)
S* 0.0.0.0/0 [1/0] via 27.177.21.9
is directly connected, GigabitEthernet0/0
27.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 27.177.21.8/30 is directly connected, GigabitEthernet0/0
L 27.177.21.10/32 is directly connected, GigabitEthernet0/0
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/1
L 192.168.1.250/32 is directly connected, GigabitEthernet0/1
Here is a portion of my configuration:
interface GigabitEthernet0/0
description Cable Internet$FW_OUTSIDE$$ETH-WAN$
ip address 27.177.21.10 255.255.255.252
zone-member security out-zone
duplex auto
speed auto
interface GigabitEthernet0/1
description hbc_staff$FW_INSIDE$$ETH-LAN$
ip address 192.168.1.250 255.255.255.0
zone-member security in-zone
duplex auto
speed auto
no mop enabled
ip default-gateway 27.177.21.9
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip route 0.0.0.0 0.0.0.0 27.177.21.9
ip route 192.168.1.0 255.255.255.0 27.177.21.9
Thanks in advance

Hello Jon,
I continue to try different configurations to get my router to connect without success. I am now trying NAT and this is where we stand now. Any help will be much appreciated.
The problem
Router now pings everything by ip address or name
Client PC from inside the LAN cannot ping modem or Internet
Relevant parts of configuration:
ip domain name mydomain.org
ip name-server 24.247.15.53
ip name-server 66.189.0.100
interface GigabitEthernet0/0
description Internet$FW_OUTSIDE$ETH-WAN$
ip address 27.177.21.10 255.255.255.252
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
description hbc_staff$FW_INSIDE$$ETH-LAN$
ip address 192.168.1.250 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
duplex auto
speed auto
no mop enabled
ip nat pool HBC-I 27.177.21.10 27.177.21.10 prefix-length 24
ip nat inside source list 7 pool HBC-I overload
ip route 0.0.0.0 0.0.0.0 27.177.21.9
ip route 192.168.1.0 255.255.255.0 GigabitEthernet0/1
access-list 7 permit 192.168.1.0 0.0.0.255
#show ip route
Gateway of last resort is 27.177.21.9 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 27.177.21.9
27.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 27.177.21.8/30 is directly connected, GigabitEthernet0/0
L 27.177.21.10/32 is directly connected, GigabitEthernet0/0
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/1
L 192.168.1.250/32 is directly connected, GigabitEthernet0/1
When pinging the modem from a client inside the LAN this is what I get from NAT translations and statistics:
#sho ip nat translations ver
Pro Inside global Inside local Outside local Outside global
icmp 27.177.21.10:40709 192.168.1.8:40709 27.177.21.9:40709 27.177.21.9:40709
create 00:00:05, use 00:00:00 timeout:60000, left 00:00:59, Map-Id(In): 1,
flags:
extended, use_count: 0, entry-id: 4, lc_entries: 0
#sho ip nat statistics
Total active translations: 2 (0 static, 2 dynamic; 2 extended)
Peak translations: 2, occurred 00:00:04 ago
Outside interfaces:
GigabitEthernet0/0
Inside interfaces:
GigabitEthernet0/1
Hits: 104 Misses: 0
CEF Translated packets: 104, CEF Punted packets: 0
Expired translations: 7
Dynamic mappings:
-- Inside Source
[Id: 1] access-list 7 pool HBC-I refcount 2
pool HBC-I: netmask 255.255.255.0
start 27.177.21.10 end 27.177.21.10
type generic, total addresses 1, allocated 1 (100%), misses 0
Total doors: 0
Appl doors: 0
Normal doors: 0
Queued Packets: 0

Delivery problems BIG problems Need help

Similar Messages

Maybe you are looking for