Delivery quantity copy

We are maintaining a forecast schedule on SD scheduling agreement. When transaction VL10a is run it shows the delivery schedule for delivery creation. When the delivery is created in from the transaction slecting a perticulat line, the delivery quantity is copied from scheduling agreement line item and not from forecast delivery schedules.
e.g the line item on SD scheduling agreement have quantity 50. and the forecast schedule on the agreement is as follows
4/15/2010  qty. 3
4/20/2010 qty   5
4/25/2010 qty. 3 and so on
When the transaction VL10a is run for dates till 4/15/2010, the item with qty. 3 is shown for delivery creation. when the item is slected and delivery is created, the quantity on delivery is 50 ( the entire item quantiry).
Let me know what settings needs to be done so that the quantity is same as on forecast delivery schedule line.
Thank you
Shrikant

Hi
Kindly check the copy control configuration in the t code VTLA as belwo
Order requirements     101   Item                                                                               
Item data              101   Item                      
Item Ext. System       0                               
Business data          2     Business Data                                                                               
Update document flow         Pos./neg. quantity   +    
Regards
Damu

Similar Messages

  • SD - copy picked quantity as delivery quantity ( VL02N )

    Hi everybody, I will be appreciate if sombody can helpme.
    I need to copy the delivery quantity to the picking quantity, becouse this is the most common situation that happend in this company. But, when I tried it, nothing happend.
    So, been in the VA02, I go -> Edit -> Copy Picked Quantity as Delivery Quantity, but nothing happend. Only sendme this warning message "Delivery quantity must be entered for the item".
    It's seems as something left me.
    Thanks,
    JEOS.

    First check the Delivery Item category"OVLP", whether "Picking relevance" check box is marked or  not.
    If it is activated then you have to pick the material.
    For that, you have to create a Transfer order for the Delivery (LT03). When you create a Transfer order, Enter your Warehouse no , Plant Delivery document number and proceed.
    The Delivery quantity should be automatically copied as Picking quantity which you can check in the overview screen in Picking Tab.
    It is mandatory that the Delivery quantity and the Picking quantity must be same to do PGI.
    As Picking is relevant for the item, so you must ensure that Picking location determination assignment  have been done.
    Otherwise, you can remove the activation from the Picking relevance field from the Delivery item category and try once.

  • Order item done depending on the delivery quantity tolerance

    Hi,
    I am looking for an opportunity to put SD items to Status done, although the delivery quantity is not the same. With the VD51, the tolerance can be controlled, but the status of the position does not affected. An example, SD order position has a quantity of 10 pc, delivery quantity of 9, tolerance 80%. In that case I need a completed order Position, no backorder quantities.
    Thanks.

    Hi Ueli,
    in the standard, if difference between requested quantity and confirmed quantity lies among over and underdelivery, you´ll be able to create the delivery and the sales order line ítem will be set as completed.
    It will be completed once you´ve created your delivery.
    Check in shipping tab in sales order that for your line ítem over or underdelivery have been copied from info record as already suggested.
    Regards,
    JM

  • How to Change Delivery quantity after creating Transfer order

    Hi
    I created a transfer order for my delivery with LT03. There is already non-ordered quantity in my delivery.
    delivery quantity is 5 but transfer order's quantity is 4.
    i want to change my delivery quantity without confirming the transfer order.
    Is it possible
    is there any customization or function for that work ?
    in se37, i tried BAPI_OUTB_DELIVERY_CHANGE. it returned the error "there is an unconfirmed transfer order"
    Moved to SD froum from LE forum at the request of OP
    Edited by: Csaba Szommer on Apr 18, 2011 1:21 PM

    If you set "Copy WM quantity as delivery quantity into delivery" for your WH/wm-mvt combination in WM/Shipping interface, the delivery quantity will be always adjusted to the picking quantity ("1" in field V_T3333-WMMUE).
    The same can be achieved manually as it was told you by Andrzej.
    There's no separate function modul to do this.
    When system is processing FCODE "KOMU_T" (manual process) the delivery quantity will be changed in include MV50AF0F_FCODE_KOMU in internal structure "lips":
          IF xlips-pikmg > xlips-lfimg OR likpd-kzebu IS INITIAL.
            PERFORM check_and_set_pikmg_lfimg CHANGING lf_subrc.
            CHECK lf_subrc = 0.
          ENDIF.
    But this is one thing, there's some preparation before this step and and the change in "lips" will cause the change of "xlips" later on, etc.
    So, it is related to several programs (includes) and forms.
    Please contact your ABAPer if you are not familiar with technical things.
    Edited by: Csaba Szommer on Apr 18, 2011 10:55 PM

  • VL32N Change inbound delivery quantity after a partial goods receipt

    Dear.
    I have created an inbound delivery using VL31N from a purchase scheduling agreement.
    I have executed a partial goods receipts using MIGO for the inbound delivery.
    I need to reduce the delivery quantity for the inbound delivery using VL32N but the system donu2019t allow to change the delivery after a goods receipt.
    How can I proceed ?
    Thanks for your help.

    Hi,
    When a (partial) goods receipt has been posted to an inbound delivery item, the possibilities to change this item are restricted.
    If the delivery quantity is the same as the goods receipt quantity, then the item is fully posted goods receipt. No change of quantity is possible.
    If the delivery quantity is still higher than the goods receipt quantity, you can create one or several new TO's for the rest and
    confirm, if needed, with differences.
    You have also the chance to adjust the delivery quantity to the picked (and already posted) quantity with VL32N and menu:
    Edit => Copy Putaway Quantities as Delivery Quantities
    Please also have a look at note 796053.
    Hope this can help
    Regards
    Mauro

  • Delivery quantity differ from picking quantity?

    If we want delivery quantity and picking quantity different what are the settings we have to do?

    Hi Gopala,
    This is not possible (at least in the standard system). The reason is that if there is a difference between the two quantities, there will be an inconsistency in the system.
    Let me explain with an example: Suppose sales order quantity and delivery quantity are 10, and picking quantity is 9. Now it seems you want to do PGI with these figures. Supposing this is possible, then the sales order will be updated with delivery, which means technically, the sales order will get closed since all the quantity ordered has been delivered. However, what reaches the customer is only 9. How would you handle this situation?
    If there is sach a difference, the best way would be to make both the quantities equal by going to "Edit -> Copy Picked Quantity as Delivery Quantity".
    I hope I have understood and explained your scenario correctly...

  • Problem when updating delivery quantity using 'BAPI_OUTB_DELIVERY_CHANGE'

    Hi experts,
    I have a requirement in which i need to update the material's delivery quantity in VL03N transaction.   For this im trying the BAPI
    'BAPI_OUTB_DELIVERY_CHANGE' and im passing the following values.
    HEADER_DATA : Delivery no.
    DELIVER : Delivery no.
    ITEM_DATA : Delivery no,
    item no,
    DLV_QTY quantity(changed),
    FACT_UNIT_NOM ( default to value '1')
    FACT_UNIT_DENOM ( default to value '1')
    ITEM_CONTROL : Delivey no,
    item no,
    CHG_DELQTY ( value "X")
    Then i use 'BAPI_TRANSACTION_COMMIT' for updating the changes. 
    Here the problem is, the BAPI is working fine for some quantity , say if i enter the DLV_QTY as 2 in ITEM_DATA, it is gettting updated.  But if i pass some other quantity , say 12, it is returning the folowing error.
    T ID                   NUM MESSAGE
    E VL                   363
    Pls tell why this error comes. and how to successfully update the delivery quantity for a set of material?
    Regards,
    Shanthi

    not answered

  • Sales order quantity equal to delivery quantity.

    31.10.2010
    Hi friends,
    To close all open orders I need to change the order quantity in the sales order to the total quantity delivered. Can you please advise how to go about this? Which table and which fields to use.
    Regards,
    Uday
    Moderator message: please try solving things yourself before asking, explain what you tried and where you are stuck when posting again.
    Edited by: Thomas Zloch on Oct 31, 2010 11:57 AM

    Hi all
      I am facing the same issue now. The system is not issuing an error message when delivery quantity exceeds order quantity and its letting me creating the delivery document and complete PGI. I have checked all the settings discussed in this thread.
    1.  0VLP Check Overdelivery is set to "B"
    2.  In VTLA, 'pos/neg' indicator is set to "+" sign for item category TAN (OR --> LF)
    3. Maintained the overdelivery tolerance limits in customer master.
    However when I set the 0VLP Check Overdelivery indicator to "A" instead, I am atleast getting a warning message. While it was B, I wasn't getting any message.
    I don't know what else could be missing or wrong. Any inputs would be highly appreciated.
    Thanks
    Vamsi

  • How to get the total no of delivery quantity in PO

    Hello,
    This is shehryar. my previous account got locked(dunno why  ) , so i have created a new acc.
    I want to display the total no of delivery quantity of a line item in PO. can it be done ?
    Thanks..
    Shehryar

    Here is a sample.  This works pretty good for me.  You must account for the reversals(102 movement types) also.
    report zrich_0001.
    data: iekbe type table of ekbe with header line.
    data: tot_menge type ekbe-menge.
    parameters: p_ebeln type ekpo-ebeln,
                p_ebelp type ekpo-ebelp.
    select * into table iekbe
               from ekbe
                       where ebeln = p_ebeln
                         and ebelp = p_ebelp
                         and VGABE = '1'
                         and ( bwart = '101'
                         or bwart = '102' ).
    clear tot_menge.
    loop at iekbe .
      if iekbe-bwart = '102'.
        iekbe-menge = iekbe-menge * -1.
      endif.
      tot_menge = tot_menge + iekbe-menge.
    endloop.
    write:/ tot_menge.
    Regards,
    Rich Heilman

  • Scheduling Agreement delivery quantity mismatch

    hi all SD Gurus,
    I've a scheduling agreement with a schedule line for 10 units. when i go for delivery delivery quantity is taken as 351 (as available quantity 694 - scheduled for delivery quantity 343). how can i get exact delivery quantity in delivery.
    also can u guide me for JIT scheduling agreement concepts???
    thanks in adv.
    amol
    Message was edited by: Chittaranjan Nivargi

    For R/3 4.6C see link below
    Ron
    http://help.sap.com/saphelp_46c/helpdata/en/78/2085347860ea35e10000009b38f83b/frameset.htm

  • How to block change of delivery quantity in VLO1N

    The system should not allow the change of delivery quantity in VLO1N, say if in sales order the quantity is 10 & they change in VLO1n as 12

    Hello Prem,
    What I understand from your post is that you want that a delivery document created for a Sales order should not allow the quantity to go beyond the Sales Order Quantity.
    You can do this by going to the following customizing entry.
    First determine the item category relevant to you here:
    LE -> Shipping -> Deliveries -> Define Item Category determination in Deliveries
    Then go to "Define Item Categories for Deliveries". Open the relevant item category. In the field "check overdelivery" Provide value "B" and save.
    Hope this helps.

  • Error message for over delivery quantity in case of batch split.

    Hi All,
    System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.  
    I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
    Thanks,
    Davinder

    Hi
    Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
    I think it you can possible to change the Information message as Warning message.
    Please  go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
    AND
    go for
    where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
    Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
    Hope this will helps you
    Dasaradha

  • Picked Quantity to be made equal to Delivery Quantity in VL02n

    Hello Experts,
    Have a requirement, where upon when entering in VL02n with a delivery no, the Picked Quantity field (LIPSD-PIKMG) should be equal to Delivery Quantity (LIPS-LFIMG).
    Only the exit USER_EXIT_READ_DOCUMENT  of include MV50AFZ1 is being called when entering VL02n and in that i tried changing the value of LIPSD structure and even tried changing XVBFA-RFMNG field value, but it is not working.
    I understand that LIPSD is structure and noticed that picked quantity is getting stored in VBFA-RFMNG field...
    Please let me know if any one have come across the same requirement and resolved it technically, rather than functional approach of EK00 condition type or making the item category as non relevant for picking, we tried these options and it is not working for the business.  I got to see many previous threads on this topic, but there was no conclusion or technical solution provided.
    So looking for TECHNICAL solution based on your experience and whether it is resolved.  Its kind of urgent and would appreciate the help of experts who have resolved it earlier. thanks

    OK got it resolved.
    We have to use BADI LE_SHP_DELIVERY_PROC, methods CHANGE_FIELD_ATTRIBUTES and CHANGE_DELIVERY_ITEM. And it works.
    thanks

  • Qty in Confirmation of Service is less than Delivery Quantity

    Hi All,
    I am trying to find the rootcause of a situation with our delivery document, hope you could help.
    In our delivery, we have TAX "Non Stock Item" line items (no Movement Type); and for these kinds of items, I understand that:
    1) They do not check stock, and you can do PGI without any stock
    2) Upon GI, these generate "Confirmation of Service" entries in the document flow (whereas Standard Items, with Movement Types attached, generate a material document)
    3) Unlike zero-delivery-quantity parent line items of batch splits, who also generate Confirmation of Service entries upon GI, our TAX items actually have a non-zero delivery quantity
    4) The TAX items are not relevant for picking, so there is a delivery qty, but then there is 0 pick qty
    The issue I am having is that for one of the TAX items, the Quantity in the Confirmation of service is less then the Delivery Quantity. That is, when I go into the document flow:
    a) The delivery line item has 55 units
    b) The Confirmation of Service has only 24 units
    c) The Invoice has 55 units again for this item
    What's weird is that, if TAX items do not check stocks at all, why did the qty in the confirmation of service become less than the original quantity that is specified in the delivery?
    Another unusual behavior i am seeing (may or may not be related to the above) is that the delivery is already invoiced but the delivery's doc flow status is still "being processed" (and not "completed"). This may be because of the above issue, but I see the TotalGdsMvtStatus of the delivery as C "Complete" - which may be why the invoice was possible.
    Hope you could help provide some insights. Thanks!
    Regards,
    Stephen

    Hi Arakish,
    Thanks for the inputs:
    you checked: delivery picked qty is showing zero (no one entereed 24 in error)?
    -> yes picked qty is 0 and the change logs do not show otherwise
    there is only the one confirmation not two for that tax item in the doc flow?
    -> yes there is only one confirmation of service entry in the doc flow, with 24 units
    there is no descrepency in units of measure? (meaning it's not EA in one place but UPK or something strange like that else where)
    -> yes the UoMs are all in KEGs
    Another observation is that for the delivery status overview, the goods movement status of each of the line items is also C/Green (including my TAX item). The total goods movement status (header) is also C/Green
    Hope you could shed more light. Thanks!
    Regards,
    Stephen

  • How to restrict the delivery quantity not more than target quantity?

    Dear Gurus,
    How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
    1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
    2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
    Any other effective method? Please advice. Thanks.
    Regards,
    David

    Dear all,
    It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
    I think there must be somewhere besides of those you menetioned.
    I notes that SAP help for the overdelivery tollerance setting of scheduling agreement: 
    Overdelivery Tolerance Limit
    Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
    Dependencies
    If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
    Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
    Pls help! Thanks.
    Regards,
    David

Maybe you are looking for