Delivery quantity greater than confirmed quantity in sales order

Hi experts,
Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
Anyway in system to check only "confirmed quantity" can be delivered?.
Regards,
Liang

Thanks Ankur for your reply.
The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
Best Regards,
Liang

Similar Messages

  • Message no 06067 "Scheduled quantity & &" greater than target quantity

    Hi,
              I change the status of the message no 06067"Scheduled quantity & & greater than target quantity & &" from W to E. Than In Se38, the schedule quantity cannot be maintained greater than target quantity.
    But in MRP Run, the message number does not work.
    How to restrict higher qty then target qty created through MRP.
    Thanks in Advance.
    Ashish Panchal

    Hi Ashish,
    The Note 83343 should answer your question.
    83343 MD01: No check of target qty in sched. agreemnt
    As described:
    "The planning run should run automatically and without interruption by some events.
    The system makes a decision either in favor of the quota arrangement or in favor
    of the source list. The system reads the scheduling agreement once in the update process.
    To have a check on the target quantity would require another read of the document which
    was determined to affect the system performance."
    A maximum quantity can be considered by means of the quota arrangement. A modification exists which will allow for a check of the maximum quantity in the quota arrangement. The note contains more details on this.
    Regards,
    Purnima.

  • Invoice quantity greater than PO quantity (item without GR)

    Dear All,
    I want a restriction in Import PO where system should give error message when Invoice quantity is greater than PO quality ( and GR is not posted).Following setting has been done but still system is issuing any error or warning message.
    1) Set System Message M8 087 as a Error in column online and BatchI in transaction OMRM.
    2) In OMR6 for tolerance key DQ (Exceed amount: quantity variance) set upper limit zero (check limit) in val and %.
    3) In MM-Inventory Management & Phy Invt.u2014Goods Receiptu2014Set tolerance Limit (OMC0)--for B1 and B2 (Order price qty variance (GR) / E and W message Upper limit is set as zero.
    Please guide me where i am going wrong or need any other setting?

    There is no tolerance key which compares the quantity/amount of the purchase order with the quantity/amount of the invoice.
    This is the standard system design.
    In the SAP standard release, the system checks the price and quantity variances on the basis of the default values for the goods
    receipts. As a result, we can post invoices although the amounts and quantities in the invoice items are greater than the amounts and quantities in the corresponding purchase order items.
    If we want the amounts and quantities for the purchase order items to be included in the tolerance check, we can use a customer enhancement (BADI) in the 'MRM_BADI_INVOICE_CHECK' function module to run the check on price and quantity variances based on the amounts and quantities from the purchase order item.

  • PO Quantity Greater Than SC Quantity?

    Hello Experts,
    I've created Local PO at SRM based on sourcing process, which came from SC. Somehow, I edited the quantity of PO greater than SC and SRM didn't throw error message. As we know, if we do the same thing at ECC (PR to PO) then error message will appear and tells us that the requirement has been ordered in full quantity.
    Is it how the standard SRM works, without quantity checking against already ordered item for related SC?
    Basically, we want to create PO from more than one bid.
    Appreciate your helps.
    Sincerely,
    Ted

    Hi Jason,
    Yes, it's obvious that we can change subsequent PO, including quantity. But the problem is how can the quantity be greater than the SC quantity? Beside, we can't control required quantity vs ordered quantity
    This will lead to ordering the unnecessary materials.
    Thanks,
    Ted
    Edited by: lastlegion on Nov 8, 2011 1:23 AM

  • Payment Amount is greater than invoice amount in sales order

    Hi experts:
    I have a Sales order that contained originally  3 lines of which the first 2 lines was delivered totally and the third was delivered partially.
    The client decided to change the remaining quantity for another reference so the procedure in the sales order was to add another line and try to close the third line by right click and "close row" but the option is not available because there is a partial delivery, so the option was to update the inicial quantity in the third line at the same as delivered and update.
    Like a result a I could close the third line and leave a fourth line available to delivery, however when I open this Sales order again an try to update a message "payment amount is greater than invoice amount" and appears inmediately the "Deposit on Order" window.
    Other Information:  The quantities delivered was invoiced but no payment has been received.
    Checking in the SCN I have not found some related information with this case because the existing answers are related with incomming and outgoing payments but like I mentioned before this docuements already have not payments.
    In relation with the decimal places, my original decimal places configuration was 2 and it was updated to 3, issue that neither is mentioned in previous answers.
    I will appreciate your help,
    Thanks,
    Manuel

    Hi Manuel,
    Your case is complicated by the fact you have not only undated the Sales Order which is partially delivered but also updated decimal places during the process.  In this case, you are probably the best person to figure out what is the system expected number.  You may restore your production db to test environment first.  Then do whatever you could to fix the problem.  If no solution can be found, you have to log a message to SAP support.
    A general advice: do not fight with system for what you think system should accept.
    Thanks,
    Gordon

  • Invoice quantity  greater than GR quantity

    Hi
    For a given company code, Invoice tolerance for price variance is maitained as $50 or 10% (upper limit) and one more tolerance key (DQ) is maintained for Exceed Amount:Quantity variance at $50.
    Scenario :  GR is posted for 1 number @ $ 49,99.
                     Invoice is received for 2 numbers @ $ 99,98. 
    The Invoice is not getting blocked due to DQ tol key.  Is there any other config we can maintain to check for small quantity check... (besides GR-IV on)
    The tolerance key DQ will work good for large quantity Invoices.  In case of small quantity, it is not very efficient as the price for each item is large.

    Hi
    Maintain PP with actual values(not the $).SAP OMR6 Settings are Perfect -100%.All this depends upon , how you are setting for the Invoice Block;
    Thanks
    Jeevan

  • System doesnt let me change the delivery quantity greater than sales order

    Hi,
    In delivery document , when I change delivery quantity greater than related sales order quantity , system just show the Message no. VL363 but let me change the quantity.
    Is it any way that system do not let me to change delivery quantity greater than its related sales order?
    thanks.
    Lida.

    Is it any way that system do not let me to change delivery
             quantity greater than its related sales order?
    Go to zeroVLP,  select the item category and maintain "B"  for the field  Check overdelivery

  • VL    363 Delivery quantity is greater than target quantity 22.800 FT

    If I am using BDC to create outbound delivery then i am getting below error:
    VL    363 Delivery quantity is greater than target quantity 22.800 FT
    But if I am using BAPI to create outbound delivery, then i am not getting any message and delivery is being created but includes only those items for which delivery qty is less than below order qty. I want to have error message in case of BAPI also.
    What is the solution? Is there any enhancement of function module available to have this message.
    Regards,
    Vijay

    Dear VIjay,
    Are you using contract has reference to create the delivery, then below link could be of help.
    [Error Delivery|Error: Delivery quantity is greater than target quantity]
    Thanks
    Murtuza

  • Delivery quantity is greater than target quantity

    Hi ,
    I am getting a warning  massage "delivery quantity is greater than target quantity" while running picking in back ground .Here a would like to inform you that we have created a Z program which which makes the picking in background against the input of Barcode number.But the problem is if we make that the same entry in VL01n it is not showing any problem.But we are using same thing means VL01n by BDC and this massage comes from SAP ...ABAP-ers have nothing to do with this .Can u tell me why i am getting this massage .
    thans and regards,
    Abhijit Duttta .

    Dear Friend,
    There Must be some problem with your BDC while entering DATA in the feilds.
    In doing Picking if the Quantity is entered more than the quantity to be delivered the message flashes.
    Just check for your self in the feild mapping in the BDC program by SE38 TC
    and also Check for the Flat File where you are entering data.
    Try and test with one Transaction in foreground and if it is successful then only go for background process.
    edited by ,
    Amlan Sarkar

  • Delivery Qty Greater than Sales order Qty

    Dear All,
    I want to do delivery against a Sales order,but system is allowing me to do PGI more than the Sales order qty,please advice where i can restict my PGI agisnt the Sales order qty.
    Regards,
    Muzamil

    Dear Prashanth,
    Thanks for your quick reply and resolution
    We have a problem when there is a delivery from projects(CNS0).When we are running the transaction CNS0 and entering  Qty 7, and creates delivery, system generates a Delivery Number and takes us to VL02N where we enter batch,picked qty and storage location.Here we find delivery quantity 7 by default and if we change the quantity from 7 to 10 even then system accepts more quantity as it checks the project stock.
    We want system should not allow the delivery quantity more than the quantity specified in the CNS0.
    We are not creating sales order as we directly delivering from projects.
    In the previous case,as you suggested we made the changes in delivery item category,but the same logic is not working here as it is without sales order.
    We are using item category DLP and Delivery type is LP.
    Request you to provide your valuable inputs
    Thanks in advance
    Regards
    Muzamil

  • Service entry sheet - GR quantity is more than confirmed quantity

    We have a service based PO with Acct assignment F and Item category D.
    We have ticked Goods receipt in delievery tab.
    We have ticked 1) invoivce receipt and 2) GR-based IV. ( S-based IV is not ticked)
    There is no purchase order history.
    While making the service entry sheet and accpeting it , system is throwing an error log "GR quantity is more than confirmed quantity".
    But we have not confirmed any quantity.
    Please advise how to solve this error or what could be wrong in PO.
    Thanks,
    Manohar

    Hi,
    Go to ML81N, put the PO number and find out Is there any service entry sheet with No acceptance(Red Mark) is found there or not for that PO Line Item.
    If yes, thenclick on that...go to change and delete that SES ......
    Hope Clear U !
    Regards,
    Pardeep malik

  • SAP sales return system should not accept quantity more than open quantity

    Dear All
    During sales return user is able to enter the quantity more than open quantity and system is allowing for that enter
    Plz tell me how to restrict this
    Regards
    Arun

    No need of exit for this.
    Go to VTAF, select the item category for the combination of order type and billing type and maintain "+" for the field "Pos./neg. quantity"
    Also go to OVAH and change message class V4 no 229 to E will work.
    Now try to create a return order and increase the quantity.  Sytem will not allow to do so but if you create a new line item, then system will also for which, you can go for exit already suggested.
    thanks
    G. Lakshmipathi

  • GR Qty greater than Confirmed Qty

    Hi All,
    We have created Purchase order with Internal order as account assignment. When ever we are doing MIGO, System is giving the error " GR Qty greater than Confirmed Qty".
    Please help.
    Thanks
    Subrato

    >
    Subrato Chowdhury wrote:
    > The MIGO is happening whenever we are deattaching the internal order. The PO Quantity is same MIGO Quantity.
    Can you expalin more this line whenever we are deattaching the internal order ?

  • Quantity is not getting conformed in sales order

    HI SD Gurus,
    i have one issue we are not able to solve i need your help, it is very urgent,
    My issue:we created sales order but quantity was not getting conformed is sales order even though we have enough stock
    but it was consumed the stock in MD04,
    we ran the SDRQCR21 program but issue is still exist,
    1. we checked all the ATP configuration  every thing is fine,
    2.we replicated the scenario in  quality it is working fine
    3.we try simulated in production but not conformed the stock
    4. total stock is in unrestricted only
    5. no block in sales order
    6. same material working fine with different plant
    7. in same plant different materials working fine
    available stock level in MMBE and MD04 is 330 qty unrestricted
    sales order created for 165
    then stock reduced in MD04 to 165,and sales order displayed in MD04 with quantity 165
    but it was not conforming the schedules in sales order(with any dates)
    I am requesting you to reply ASAP if any one faced the same scenario
    BR,
    CS

    Hi CS,
    Please check the stock availability in CO09. If CO09 shows available quantity as zero then the sales order quantity cannot be confirmed.
    Please review SAP Note Number 89362 - No confirmation despite available quantity/stock for further information on this transaction.
    You will also find further information in this document:
    http://scn.sap.com/docs/DOC-58040
    I hope this helps.
    Kind regards,
    Catherine

  • Withdrawal quantity more than Committed Quantity

    Hi Gurus,
    I am facing 1 problem with Withdrawal quantity for 1 component for  Production order.
    I have a Production Order of 430 Quantity .
    When I check components , it is showing Committed Quantity as 435 while withdrawal Quantity as 439.
    We have activated backflush.
    Can anyone tell me why Withdrawal quantity more than Committed Quantity and order quantity?
    --Denish

    Hi,
    Commited quantity is the quantity which, according to the availability check, is available.
    Wwithdrawal quantity is the quantity that has already been issued.
    Probably, you issued this component more than you planned, however you have done this issue with backflush of production confirmation. Therefore, issue is still on planned issue and withdrawal quantity exceeds your planned quantity, and commited quantity is less than withdrawal quantity.
    Regards.
    Onat

Maybe you are looking for