Delivery quantity less than PO quantity

Hi
I have created an inter-company Purchase Order (NB type PO) which has a delivery quantity of 100 (example). Now I am creating an Outbound Delivery through VL10B. The delivery (NLCC type delivery) but the issue I am facing is that the delivery quanity is less than the PO quantity 70 (example). Why did this happen?
I checked MD04 and I can see that there is sufficient available stock on the delivery date againt that particular delivery.
Please advise.
Thanks
Suro

I am assuming that by "confirmed qty in PO Delivery schedule tab" you mean the "Delivered" column. I think this gets populated ONLY once the delivery is created which is for the reduced qty, The HELP on this field shows "The Quantity delivered field shows you the quantity delivered against this schedule line via an outbound delivery (or possibly several such deliveries). This enables you to check whether the supplying plant will deliver the desired quantity of the material as scheduled.". Thus I do not think this get populated on PO creation autmatically and as such I could not see and confirmed qty field on the delivery schedule tab.
By the way we also have a Inbound delivery as part of CONFIRMATION key where we have confirmed full qty on the inbound delivery.
Regarding MD04, yes I am looking at that closely as well since that gives oen deliveries and I am trying to figure out available stock on that delivery date and the open delivery quantity for all the deliveries.......
Any other inputs are welcome...
thanks

Similar Messages

  • Invoice verification quantity less than GR quantity

    Hi
    I got goods of 100 quantiy of Rs.1000 each
    But invoice was of Rs. 90 units
    I chnaged the quantity. But amount was not changed automatically. i need to change it manually?
    If i change it manually, i can put any amount. So there is no control. How to control this ?
    There is some net invoice facility. Is it useful. If yes, how to use net invoice facility?

    Hi,
    　　　Do not  you get another invoice for 10 unit.
            If the invoice is final,   you have to do TRC:MR11   for adjust.
    Regards,
       Gaito

  • SALE ORDER QUANTITY LESS THAN DELIVERY QUANTITY ? NO CECK IN SAP ??

    Hello friends,
            I created a sales order of quantity  10 , having two material codes each having quantity 4 and 6 . i created delivery for the one by putting delivered quantity 4 and save , then i created delivery for second and put delivered quantity 8 which was greater than the sale order quantity left ,system saved the delivery and didn't popped any error message.  
                                     Does SAP have options to over come this mistake by end users.
    regards

    Dear Joshi,
                      Please get in touch with your abap er as there user exits which can be written to avoid this situation.
                      Let me explain you further one more situation.
    First one, Your query is if for  item A ord qty is 6 the system saved the delivery with 8 qty which is greater than ordered quantity.  I know the gives a warning doing this.
    Second Situation :
    Say item A ordered qty is 5, and i made a delivery for 3 and saved it. Now the open quantity on the order is only 2. (5 -3 =2).  But one of our users reduced the ordered quantity to 2 despite saving a delivery with quantity 3.
    so the situation is ord qty is 2 and delivered is 3 qty. which is again wrong. But while reducing the ordered quantity less than the delivered quantity the system gives a warning message telling "  ORDERED QUANTITY IS LESS THAN DELIVERED QUANTITY ".
    Also just imagine we made delivery for qty 5 and invoiced it.After which you reduced the delivered quantity to say 3. So delivered is 3 but invoiced is 5.
    Hence for these kinds of practical problems we have addressed them through user exits with the help of our ABAP'ers by turning those warning messages into error messages by selecting the suitable message class.
    Hope the explanation helps you. And thanks for all your patient reading.
    Reward points if useful.
    Thanks & Regards
    Sadhu Kishore

  • Create TO for a quantity less than the delivery quantity

    If we have created an inbound delivery in MB1C, 561 movement to post an initial entry of stocks, and then packed the HU in Vl32N. Now, we want to create a TO for a quantity less than the delivery quantity.
    In LT03 I cant see any option to change the TO quantity. How can we actually change the TO quantity to be less than the Delivery quantity.
    Thanks
    -Mike

    Mike,
    I dont think that's going to be possible.  The TO gets data from the del qty which is in your embedded HU since you have packed the qty in the del in the HU,
    so if you are trying to create a TO with less qty means that you want a qty less that the HU in the del and this is not possible.
    Alternatively : 
    1) You can receive it in your warehouse.
    2) Move it in a re-packaging area
    3) break the HU and re-create a new HU.
    4) Pack the desired qty
    5) Move the 2 HU's back to their desired bins.
    Hope this helps and works!
    thanks'

  • Message no. RM109 The quantity at RP  is less than the quantity at next RP

    Hello everyone,
    I am getting an error in regards to a reporting point.  I tried going into MF4R to reset the reporting points and when I do I get the following message:
    The quantity at RP 0220 is less than the quantity at the next RP
    Message no. RM109
    Diagnosis
    The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
    Procedure
    Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
    I have went into MF26 and  "Yes" reporting point 0220 is less than the following reporting point.  My question is... how do I fix this?  Any help will be greatly appreciated.

    Good morning Raj,
    Here is what MF26 is showing:
    614830             0033 0001 W3300
    0010                84  PC
    0020                38  PC
    0030                38  PC
    0040                38  PC
    0050                38  PC
    0060                84  PC
    0070                84  PC
    0080                84  PC
    0090                84  PC
    0100                38  PC
    0110                84  PC
    0130                38  PC
    0140                38  PC
    0150                38  PC
    0155                84  PC
    0160                38  PC
    0165                84  PC
    0170                84  PC
    0180                38  PC
    0185                84  PC
    0190                84  PC
    0200                38  PC
    0210                38  PC
    0220                38  PC
    0225                84  PC
    0230                84  PC
    0240                84  PC
    0245                84  PC
    0246                84  PC
    0250                84  PC
    0260                84  PC
    0270                84  PC
    0280                84  PC
    0290                84  PC
    As you can see RP 0220 shows only 38 pcs  RP 0225 and up shows 84 pcs.  Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs.  But, when I went back into  MF26 RP 0220 still shows 38 pcs.
    Thank you for your help!
    Rhonda

  • Message-4F181 :Credit Quantity less than Excise invoice Qty

    HI,
    I have done migo with part 1 entery,WHLE DOING J1IEX .I AM GETTING A WARNNING MESSAGE 4F181 :Credit Quantity less than Excise invoice Qty
    Please suggest
    Regards
    SAM

    Hii,
    Did u reduce the Quantity of the Excise Invoice??
    Regards,
    Kumar

  • Excise invoice quantity cannot be less than the quantity received

    Hi,
    I have done MIGO with part 1 entry but while doing J1IEX, I am getting an error message 4F109 : Excise invoice quantity cannot be less than the quantity received.
    Please note that we have done MIGO with 5000 qty. and doing J1IEX with short 3000 qty.
    Regards.

    Hi,
    For this case of "Part I" selected during GR, you need to create Excise invoice thro J1IEX ->  Capture Excise Invoice -> Good receipt (use the material document number), which will complete the part II posting. Then you can proceed with MIRO.
    With regards,
    Jeeva.

  • Posting change quantity less than quantity already posted

    Hello,
    Our customer have a problem on Live system. On transaction LU04 have a
    posting change notice impossible to display, because system provide the
    message number L2 145 'Posting change quantity less than quantity
    already posted'. The Posting Change Number XXXXXX and the
    transfer order is XXXX Is there any way to cancel this TO??It is impossible to do something with that.
    The history is: 321 movement from quality for 5040 un. 3 TO, 2 with 2160 are fine, and the 3rd to sap have generated 2160 un instead of 720 pending.
    Any one had this problem in the past?We are forbidden to change status for PCN from 'T' to 'U'.
    Thanks

    Hi,
    I think you have posted the question in the wrong forum. This is MDM forum.
    Thanks and Regards
    Nitin Jain

  • Withdrawal quantity more than Committed Quantity

    Hi Gurus,
    I am facing 1 problem with Withdrawal quantity for 1 component for  Production order.
    I have a Production Order of 430 Quantity .
    When I check components , it is showing Committed Quantity as 435 while withdrawal Quantity as 439.
    We have activated backflush.
    Can anyone tell me why Withdrawal quantity more than Committed Quantity and order quantity?
    --Denish

    Hi,
    Commited quantity is the quantity which, according to the availability check, is available.
    Wwithdrawal quantity is the quantity that has already been issued.
    Probably, you issued this component more than you planned, however you have done this issue with backflush of production confirmation. Therefore, issue is still on planned issue and withdrawal quantity exceeds your planned quantity, and commited quantity is less than withdrawal quantity.
    Regards.
    Onat

  • Message no 06067 "Scheduled quantity & &" greater than target quantity

    Hi,
              I change the status of the message no 06067"Scheduled quantity & & greater than target quantity & &" from W to E. Than In Se38, the schedule quantity cannot be maintained greater than target quantity.
    But in MRP Run, the message number does not work.
    How to restrict higher qty then target qty created through MRP.
    Thanks in Advance.
    Ashish Panchal

    Hi Ashish,
    The Note 83343 should answer your question.
    83343 MD01: No check of target qty in sched. agreemnt
    As described:
    "The planning run should run automatically and without interruption by some events.
    The system makes a decision either in favor of the quota arrangement or in favor
    of the source list. The system reads the scheduling agreement once in the update process.
    To have a check on the target quantity would require another read of the document which
    was determined to affect the system performance."
    A maximum quantity can be considered by means of the quota arrangement. A modification exists which will allow for a check of the maximum quantity in the quota arrangement. The note contains more details on this.
    Regards,
    Purnima.

  • SAP sales return system should not accept quantity more than open quantity

    Dear All
    During sales return user is able to enter the quantity more than open quantity and system is allowing for that enter
    Plz tell me how to restrict this
    Regards
    Arun

    No need of exit for this.
    Go to VTAF, select the item category for the combination of order type and billing type and maintain "+" for the field "Pos./neg. quantity"
    Also go to OVAH and change message class V4 no 229 to E will work.
    Now try to create a return order and increase the quantity.  Sytem will not allow to do so but if you create a new line item, then system will also for which, you can go for exit already suggested.
    thanks
    G. Lakshmipathi

  • ERROR: PGI in delivery with picked quantity less than delivery quantity

    Hi Friends!
    I need your help, i have the following situation:
    Outbound Delivery with batch position:
    90001  Mat DD3450 Picked Delivery Quantity=98 and Picked quantity=84
    Overall Pick Status = "B"
    Overall WM Status = "C"
    The outbound delivery was posted completely and the following documents was generated:
    WMS transfer order:  With 84 UN in quantity
    Material document:  With 98 UN in quantity
    Invoice: With 98 UN billed
    The question is how was posible to generated the PGI for the outbound delivery when the picked quantity was less than delivery quantity? is a SAP program error?
    Thanks
    Best regards
    Enrique

    benito,
    Check your Picking Confirmation config. as you are using WM/Lean WM, then your Shipping Point should have a mandatory requirement to confirm all TO's. The confirmation should update the Picking Status and the Overall GI Status to 'C' (with any relevant changes to the picked qty). Give that a go.
    Cheers,
    Paul...

  • Confirmed quantity is less than open quantity in sales order

    when i create a sales order the Cumm ATP quantity was less than the amount specified in the sales order, i checked my stock and i have enough stock yet my delivery quantity is less than my sales order quantity and if i maually try to increase the amount in the delivery to what i have in the sales order it gives a message only  xxxxx available . what can i do?

    Date               MRP e                                                             Reqd Qty     Confmd    *** ATP
    01.09.2011    Stock                                                                    457
    15.08.2011    CusOrd Totals record                                           20 -               0             0
    19.08.2011    CusOrd    Totals record                                       3,780-         3,780         0
    30.08.2011    CusOrd    Totals record                                       975-           300        3,323-
    31.08.2011    CusOrd   Totals record                                       150-            150         3,773-
    01.09.2011    SLocSt                                                                 0401           378         378-
    01.09.2011    SLocSt                                                                 0402            79            79
    I have put the text above for your use, so you can now help me out, i hope to hear from you soon.

  • Delivery quantity greater than confirmed quantity in sales order

    Hi experts,
    Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
    Anyway in system to check only "confirmed quantity" can be delivered?.
    Regards,
    Liang

    Thanks Ankur for your reply.
    The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
    But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
    For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
    I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
    Best Regards,
    Liang

  • Outbound Quantity should be equal to or less than STO quantity.

    Dear Gurus,
    My client have problem regarding the quantity in Outbound deliveries.
    Suppose in STO quantity is 100, user is making partial Outbound Delivery(OBD) say of 50 quantity today and making OBD of  60 quantity tomorrow . system is allowing to make OBD of more quantity than STO has.
    System is not allowing to make Goods receipts of second OBD of 60 quantity by throwing error of quantity exceeds,then user is going to STO again and increasing the quantity in STO equal to shortage.
    My problem is how i can stop user so that he can not make OBD more than STO quantity? What setting i have to change in system so that system will give error at OBD creation stage itself.
    Thanks in Advance.
    parag.

    Dear friend
    Delivery item categories settings 0VLP will not work in STO because STO is a purchase order not sales order
    This is an input that i got from MM forum
    Please go thro this as it will useful to you
    STO - How to control Over delivery ? Please check OSS note 548914.
    I have searched in MM forum and found this thread which is relevant to your requirement
    Forum post in ERP - Logistics Materials Management (MM): STO - How to control Over delivery ?
    STO - How to control Over delivery ?
    From OSS note 548914 Over/underdelivry tolerances for GR/GI for stock transp.ord.
    u2022     R E L E A S E < 4.70
    Stock transport orders without SD processing / delivery (for example movement type 351 for the goods issue, Transaction MB1B, MB11):
    During the creation of goods issues for stock transport orders the system does NOT include overdelivery tolerances (T156F-FELDM = DM07M-UETMG) maintained in the purchase order item. The system checks only against the quantity ordered during which the system may display message M7022, which can be customized. This is valid for both stock transfers within a company code and for cross-company-code stock transfers.
    Stock transport orders with SD processing / delivery (for example movement type 641 for the goods issue, SD Transactions VL02, VL10):
    If these are stock transport orders with SD processing, the system neither checksduring the goods receipt nor during the goods issue against the quantity ordered + overdelivery tolerance.
    u2022     R E L E A S E >= 4.70
    As of Release 470 there is, if required, a check against underdelivery tolerances (Field V_T161W-TOLKZ) during the goods issue for the stock transport order. Otherwise the checks are as described for the earlier releases. Customizing: IMG => Materials Management => Purchasing => Purchase Order => ..underdelivery tolerances
    My Issue is solved.
    Using the BADI LE_SHP_GOODSMOVMNT we were able to control this scenario.
    Take the help of the abaper & proceed.
    This is not possible thro customization only thro user exit it can be controlled
    Dear friend
    There is one way to control over delivery in STO
    Go to t code OMCQ
    Select message M7 - 024 and change from warning to error
    Under delivery can be controlled by img-mm-purchasing-purchase order-set up STO----assign delivery type ,one step procedure and under delivery tolerances
    Regards
    Raja
    Edited by: ramanathan raja on Mar 20, 2009 12:14 PM

Maybe you are looking for