Delivery Split during creation of delivery for STO

While creating a delivery for STO, delivery is being created for individual line items. On analysis of VL 033 message, I found that the delivery split is happening because of Function SH: Unloading Point.
The message is
<i>"delivery split due to conflicting header data (Function SH: Unloading Point: <-> UP0065)"
Item 000020 cannot be shipped in the same delivery with the other items in the document because the header data (Function SH: Unloading Point) is different. The Function SH: Unloading Point item field has the value UP0065, but in the delivery checked for concatenation it has the value .</i>
This unloading point has been maintained in the customer master data (and needs to be maintained).
I have also been told by my Basis consultant that note 842704 is not valid.
Why is this happening and how to prevent it.
Lakshman

Sorry... but I could not see either the delivering point or the unloading point in the material sales: general / plant view. Those fields are not visible on the screen. I could also not find them in the config (I was checking if they are suppressed).
Regards,
Lakshman

Similar Messages

  • Delivery Split during creation of delivery using ME2O

    The system creates two delivery documents for the same vendor while using transaction ME2O. There is no delivery split criteria defined in customizing

    Hi,
    Please check following note
    546668 - FAQ: Delivery split when creating deliveries
    Also check the note 355404 - Why was there a delivery split during creation?
    in this note you have attached report ZLE_ANALYZE_DELIVERY_SPLIT run it in SE38,
    You will come to know why two deliveries created
    Thanks

  • Finding out the Batch which is present during creation of delivery

    Dear All,
    I need to keep track of changes in batch during delivery. I can find out the change using change documents ( tables CDHDR and CDPOS ). The problem is it keeps track of batches only after the document is saved . If during creation the batch is changed , we are not able to see the initial batch , all the other changes can be tracked using change documents. How can we find out the batches during creation of delivery ( Is there any table which stores the batch no during delivery.
    Regards
    D. Mallick

    This does not looks possible...Changes can only be tracked once they are saved.

  • Why there is no manual creation of deliveries for STO...

    Individual(VL01N) : You can create one delivery for each sale order on the screen. There is no manual creation of deliveries for STOu2019s. Transaction VL01N
    Why there is no manual creation of deliveries for STO...
    Thank you very much.
    Hoolaa
    Edited by: Hoo Laa on Mar 28, 2011 12:28 PM

    hi ,
             you have  to create a sale order process to delivery the tcode VL10B for STO Porcess. not VL01N.
    Regards,
    A.Sithanandan

  • Error during creation of delivery challan (VL01N) for batch

    Hi,
    At the creation of delivery challan during batch determination the system displays the message 'The material is not handled in batch'. Although we have despatched this material considering batch determination previously with all customisation.
    Kindly revert back as soon as possible.
    Regards,
    Goraksh.

    Hi Goraksh,
    I think somebody removed the check box of "Batch" from material master.
    Please check and revert.
    Regards,
    MT
    Edited by: M T on Apr 29, 2010 4:28 PM

  • Inbound delivery split on creation

    Dear colleagues,
    I'd like to create a unique inbound delivery for different scheduling agreements but the system splits it into 2 different inbound deliveries.
    Both purchasing documents have same header/item information.
    Why is system acting like this? I use VL31N and I do select "Purchase orders" button on the top.
    Thanks very much in advance.

    I asked myself and I answer myself...system is creating different inbound deliveries because purchasing documents have different address information in EKKO-ADRNR.
    That's a standard functionality added by OSS 667436 which modifies include LV50SF08.
    In order to avoid this functionality it's possible to erase field XKOMDLGN-ADRNR_LI = "" at the beginning of include.
    I hope it helps someone.
    Thanks anyway,
    Josep

  • Delivery Quantity change during creation of Delivery Document

    Hi Friends,
       I have a requirement of creating a Partial delivery when not much stock is available.
       For this I am using a BADI 'LE_SHP_DELIVERY_PROC' method Save_Document_Prepare.
       I am changing the contents of CT_XLIPS-lfimg in the method and also keeping UPDKZ as 'I', but still
       the quantity is not changing.
    Pls Suggest.
    Arpit

    Check, "Outline agreement message" in Document type details in VOV8- (eg: CQ- Quantity Contract) under Transaction flow view.
    Use Indicator:A- Check at Header level.
    Then system pop ups the message saying " Already Contract is open for this Customer" - ( Assume, SOld to party already have Open Contract)
    similarly, for Material, for this you should use  Indicator" B- Check at Item Level.
    Hope it helps

  • Error during creation of delivery in VL01N

    Dear All,
          I have created a sales order in VA01 .Then while I am trying to create delivery in VL01N system is giving error no : BS051 Create delivery" not allowed (User Status PREP, object )
           Please let me know what is missing in this procedure .
    Abhijit Das

    Dear Abhijit,
    Have you assigned any Delivery-related Status Profile in your Sales Order?
    Best Regards,
    Amit

  • Error during creation of Resource for Telemetry.

    Hi, I am trying to enable Telemetry so I can look at performance of resources used by Resource Groups.
    When I try set Mount Point for Filesystem resource, I get following error:
    root@bidwsvia # clrs set -p FilesystemMountPoints=/telemetry telemetry-hasp-rs
    clrs: bidwsvia - This node is not in the replica node list of global service dsk/d77 associated with path /telemetry. Although AffinityOn is set to TRUE, device switchovers cannot be performed to this node.
    clrs: (C189917) VALIDATE on resource telemetry-hasp-rs, resource group telemetry-rg, exited with non-zero exit status.
    clrs: (C720144) Validation of resource telemetry-hasp-rs in resource group telemetry-rg on node bidwsvia failed.
    clrs: (C219072) Failed to update resource properties for "telemetry-hasp-rs".
    root@bidwsvia #
    Quick search of this error and Oracle Error Messge description tells me that this is just warning, ignore it ..
    But clrs is not ignoring it ..
    Any ideas??? Thanks.

    Since you want the SUNW.HAStoragePlus (HASP) resource to manage the file system for failover, you need to remove the global mount option.
    If you would have a global file system, then the "mount at boot" option needs to be yes, but then you would not manage the file system mount through HASP, instead you would just manage the device group pimary/secondary by setting the GlobalDevicePaths property - but I doubt this is what you want here.
    Regards
    Thorsten

  • How to create the Batch Automatically during creation of Production order

    Hi All,
    I wanted to create the Batch Automatically for the Specific order type during creation.
    Not for all order type so OPKP transction will not work for me.
    Please suggest any way or user exit any production order.
    Thanks,
    Amit Shah

    Hi All,
    Thanks for your inputs.  
      1. Why we want create the Batch Auto -
          For Std Production Order type we want to generate Batch Automatically.
          For Re-work Production Order type we don't want Batch Created Auto.
          If you have better solution please let me know.
    2.  Scheduling profile.
          I think I misunderstood your solution.
          You want to say that mainatin the Schd profile in the SPRO with repect to Sub Schdler.
          Already client is maintaining the Schd Profile in the Material Master.
           please correct me if i am wrong.
    Thanks,
    Amit Shah

  • There's an error while delivery note creation for STO order

    There's an error while delivery note creation for STO order  even stock available in unrestricted stock
    Edited by: sharma aman on Nov 8, 2011 9:00 AM

    Dear Sharma Aman,
    Check whether the following link helps you.
    Mesaage : while creation of delivery : An item with no delivery quantity .)
    Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
    In that case , you need not wait for the solution as it is already available.
    If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
    Try to search in the forum or in google before posting further queries
    Thanks & Regards,
    Hegal K Charles

  • Delivery split for multi-line STO

    Hi,
    I have a 2 line STO with difeerent material in each line. For both the materials the transportation groups is different.
    However for both the materials in the STO, shipping data is same. which means ship-to party,shiping point,condition,route etc. is same.
    But when i am trying to create outbound delivery using VL10B , systme creates 2 different deliveries instead of single delivery containing 2 line itmes  of the STO.
    However when we create sales order of these material, systme creates only single outbound delivery. Then why is it createting diferent delivery for STO ? We need only 1 delivery.
    Can any one help ??
    Best Regards.

    Hi,
    Pls check in 0VLK the Delivery Type used in your STO configuration and see if you have Delivery Split by Warehouse Num or Delivery Split Part (for Delivery Split for Additional Partners) checked.
    Thanks.

  • Outound delivery creation for STO.

    Hi All,
    I have configured all setting regarding STO and created STO. Outound delivery is not getting created using Tcode VL10* . Can u pls tell me how to create outound delivery.
    Jagan

    Hi Jagan
    first you check shipping data in item details in STO. If all the details captured like Delivery type (NL for Intra company and NLCC - Inter company) and Shiiping point and Customer number and Sales area.
    If anything is missed out, you need to check the configuration of set up stock transport order. also check whether material is extended to Sales View.
    If everything is ok, try VL10B for STO. Still if you are not able to create Delivery, please check the log.
    if any problem, let us know.
    regards
    Srinivas

  • Avoid outbound delivery split creation during GI

    Hi guys,
    Every time we perform a GI in /SCWM/PRDO for a partial picking, the system creates a delivery split, leaving the rest for the original delivery.
    I want to avoid the delivery split! The operators have a procedure to check the warehouse tasks before the GI, but sometimes they forget to check and they post the GI with open quantity.
    For this reason I would like to know; if there is a way to block the GI when there are items with open quantities?
    Thank you all.
    Anderson Ranéa

    Hi
    If you want to prevent outbound delivery split, you may refer to note 1600871 for details, it has 2 solution provided to avoid the spliting.
    Hope it helps..
    BR
    Vic

  • Delivery split for Replenishment Delivery in VL10B

    Hi Gurus,
    Can you advise me how I will be able to split delivery (VL10B) depending on maximum volume of my delivery?
    Example we want 1 delivery per 100,000 Cubic meter.
    In configurations, this can't be controled.
    Our current process is that, we create one delivery for collective STOs then maintain handling units (through packing) the packaging material controls the volume limit.  After grouping the materials through HU, we then split the delivery in VLSPS per HU.
    Is there a way to split the delivery from its creation to consider the max volume?
    Thanks,
    sdapprentice

    Hi,
    Thanks for your reply.  But are there any other setting you have in mind?
    Example my max delivery volume should be 100,000 cubic meters.
    Open STOs due for delivery
    STO item 10 with 200,000 Cubic meters as volume.  So when I run VL10B, I should have 2 deliveries created for STO item 10.
    Deliv 1 - 100, 000 cubic meters
    Deliv 2 - 100, 000 cubic meters.
    Thanks.

Maybe you are looking for

  • Int ?

    Hi! I got this error, when using int, I believe that is the reason anyway,. Do i miss something there in the beginning? Where on the net can I found which things is inluded in which "library"? (Like that i need javax.swing.*; for a dialogbox(JOptionP

  • Firefox is installed, but not working

    from past 6 months am suing Firefox. yesterday morning, when i tried to open, it was not working. i clicked on Firefox logo, but there was no response or any error messages. i reinstalled it. but still not working.

  • Possible to copy text to clipboard through script?

       I'm currently creating a temporary textPath and copying that to the clipboard with the app.copy() method.  Is there a way to just simply copy the text directly to the clipboard rather than having to do it through copying an object?

  • Is there any one in HP that pays any attention to the customer?

    I have had numerous PC's and laptops in my work and at home and have bought HP products for the last 20 years, but that is about to change.  I recently had an issuewith the sound or lack of it on my PC. I could get sound from CD's but not the interne

  • On Google, Ffox 3.6.12 only shows 10 results even when I specify 100; Mac G4 10.4.11; other browsers show 100 no problem.

    On my Mac dual 1.25 GHz Power PC G4 with OS X 10.4.11 and Firefox 3.6.12, when I open Google and specify 100 results like this... http://www.google.com/advanced_search?hl=en&num=100 ...it always just shows 10 results. Whereas Opera and Safari (I don'