Delivery Split - Pls Help

Hi
In our system we have multiple transportation groups. For a configurable material we maintain different transportation group and for the sub item we maintain different transportation group (because we sell the sub item separately too). So after order when I try to create delivery, the system splits into two delivery because of two transportation groups. But I want to have both the higher level item and the sub item to be in a single delivery. Could you please tell me where I can configure in copy control to have the them in one delivery.

Hi,
From IMG>Logistics Execution>Warehouse Management>Interfaces>Shipping-->Define Shipping Control
There you can handle your case accordingly! Good luck
Nice Weekend
Tao

Similar Messages

Pick qty delivery qty----Pls help

Hi,
THe storage type as full stock removal checked without any returns to same bin and return storage type maintained.
A delivery is created for 5 pc but picked 9 pc so i am not able to do PGI,(TO Created and confirmed)
I think we cannot change the pick qty Pls suggest any workaround for this.
An OSS note exists for this to change the pick qty but business doesnot want to implement the OSS note 25151.
Pls help
Indhira

Hi,
From IMG>Logistics Execution>Warehouse Management>Interfaces>Shipping-->Define Shipping Control
There you can handle your case accordingly! Good luck
Nice Weekend
Tao

Output type not triggered during Delivery Order - pls help

Hi,
Need some help.
I'm trying to setup output determination for delivery. It's a new output type for delivery.
There are some checking that I want to build in to determine whether the output type is to be generated. Therefore I have to make sure of requirement (routine). However, after putting in the configuration, coding the requirement and creating the condition record, the output type still cannot be generated. When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
Any idea what could be wrong?
This is what I've done :
1. Creating condition tables
2. Creating access sequence & assigning the condition tables to the access sequence
3. In the access sequence, assign requirement number 999. The "Exclusive" indicator is not ticked.
4. Ensure that the requirement 999 is activated in tcode VOFM.
5. Create output type, assign the access sequence to the condition type.
6. Assign the condition type to the output determination procedure. Make sure the "Manual" checkbox is not ticked.
7. Assign the delivery type to the output determination procedure.
8. Create condition record.
Note : when i created the condition record, I am not able to assign a Partner Function (for eg. SH) to the record. However in the config for the output type I've already configured for that Partner Function "SH" to be allowed for that output type.
Appreciate suggestions & feedback.
Thanks
Rgds,
L

Hi,
When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
This is because in requirement you put certain conditions should be fulfill then out put should trigered,
Example - if you maintained condition in requirement that user must maintain loading point
Now when creating delivery user not maintained loading point then output will not trigered, so user must maintain that then only it will trigered output.
Same problem just now solved, check which data maintenance conditions in routine and try to maintain that.
Kapil

Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Hi
Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Dear Srikanth,
I am not sure, if my answer will satisfy you, but anyway I will try:
Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
Well, to solve situation you have few ways:
1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
Best Regards
Arnost

Delivery split for multi-line STO

Hi,
I have a 2 line STO with difeerent material in each line. For both the materials the transportation groups is different.
However for both the materials in the STO, shipping data is same. which means ship-to party,shiping point,condition,route etc. is same.
But when i am trying to create outbound delivery using VL10B , systme creates 2 different deliveries instead of single delivery containing 2 line itmes of the STO.
However when we create sales order of these material, systme creates only single outbound delivery. Then why is it createting diferent delivery for STO ? We need only 1 delivery.
Can any one help ??
Best Regards.

Hi,
Pls check in 0VLK the Delivery Type used in your STO configuration and see if you have Delivery Split by Warehouse Num or Delivery Split Part (for Delivery Split for Additional Partners) checked.
Thanks.

Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

Hi All,
I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
2 of the DTP loads are extracting the data from 3 PSA requests.
But, one of the DTP load is filtering on ONE PSA request.
So, we are not getting the full data into DSO.
Can some one pls help me why the DTP load is beheaving like this ???
Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
Cheers,
Nisha

Hi Jr,
Sorry for late reply.
I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
I have changed it now and its working fine.
Thanks,
Nisha

Not getting PO printed while using bursting pls help

Hi All,
Working on converting PO report to XML. While using bursting to print the pdf file the document is not sent to the printer..
But in the output file of the "XML Publisher Report Bursting Program" getting success.
Not sure why report output is not sent to the printer.
Pls help......
Thanks
Rajesh
Edited by: Badsha on Jun 17, 2010 2:19 AM

Hi...Please check the Burst Control file with the printer & IP details.
Look for the file below.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/DATA/LIST_DEPT/DEPT/LIST_EMPLOYEE/EMPLOYEE">
<xapi:delivery>
<xapi:email server="${EMAIL_SERVER}" port="${EMAIL_PORT}"
from="${FROM_EMAIL_ADDRESS}"
reply-to ="${REPL_TO_ADDRESS}">
<xapi:message id="email1" to="${TO_EMAIL_ADDRESS}" cc="${CC_EMAIL_ADDRESS}"
attachment="true" content-type="html/text"
subject="Employee Report for Empno ${EMPNO}">
Dear ${ENAME}, Please review the attached document.</xapi:message>
</xapi:email>
<xapi:filesystem id="file1"
output="C:\burst\sample\${EMPNO}_${ENAME}_${MGR}_PRINT.pdf"/>
<xapi:print id="print1" printer="${PRINT_URL}" copies="2"
orientation-requested="3" />
</xapi:delivery>
<xapi:document key="${EMPNO}"
output-type="pdf" delivery="email1">
<xapi:template type="rtf" location="${TEMPLATE_LOC}"
filter=".//EMPLOYEE[DEL_CHANNEL='EMAIL']" >
</xapi:template>
</xapi:document>
<xapi:document key="${EMPNO}" output-type="pdf" delivery="print1">
<xapi:template type="rtf" location="${TEMPLATE_LOC}"
filter=".//EMPLOYEE[DEL_CHANNEL='PRINT']" >
</xapi:template>
</xapi:document>
<xapi:document key="${EMPNO}" output-type="pdf" delivery="file1">
<xapi:template type="rtf" location="${TEMPLATE_LOC}"
filter=".//EMPLOYEE[DEL_CHANNEL='FILE_SYSTEM']" >
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
check the printers setting as required....aslo check what printer you are using for pdf printing...Pasta Printing??
Thanks
Ratnesh

Urgent,showing error while running form..pls,help...

Hi,
I have created my own view named GP_NUIF_V and have also successfully established a Database connection,using FWK_TBX_TUTORIAL.I have developed a personal page in Oracle9i JDeveloper ,which is to fetch particular details from my view and show it .. but whenever I run my form I am continuously getting this type of error..pls,help me out ,as my project delivery is nearing..for this I am not been able to head on to registering the form..I have checked from Pl/Sql developer that my query is just running fine as I wanted it to be..I have also changed the FNDNAM in the .dbc file to my view name but it is giving me the same error..please,look at my error and suggest all other ways in how I can solve my problem ,as early as possible..
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1064)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1794)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.adf.mds.exception.MDSRuntimeException
     at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
     at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
     at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
     at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
     at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
     at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
     at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
     at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
     at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
     at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
     at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
     at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
oracle.adf.mds.exception.MDSRuntimeException
     at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
     at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
     at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
     at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
     at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
     at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
     at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
     at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
     at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
     at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
     at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
     at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

Don't put reposts. Follow the issue at one place Re: Urgent,showing error while running form..pls,help...
--Shiv

Delivery Split for PO

I want to split delivery creation for 'NL' type of delivery for STPO i.e. 'UB' type.
i.e. if a PO has 2 materials with different material types ( e.g FERT & HAWA ), then 2 different deliveries have to be created in this case automatically.
How can the same be achieved.

If you want a permanent Solution on this you will have to take the help of a Routine.
If you want to manually force a delivery split for each line item in the Purchase Order, then give a different value in the "Unloading Point" field for each item.
Unloading Point field is there at Item level in the Shipping Tab in PO.
There are positives and negatives of this approach.
Positive being that since Unloading Points are different for each line item in PO, there will be a seperate delivery for each line item.
Negative is that since the Unloading Field value is defaulted from the PO into the delivery at header (Goto>Header>shipment) you will have a seperate Invoice for each delivery as the Unloading points are different for each delivery. You will not be able to have a consolidated Invoice.

Pls help me to create SO using BDC for multiple line items (VA01)

Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV45A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-AUART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-AUART'
                              'ZOR'.
perform bdc_field       using 'VBAK-VKORG'
                              '2000'.
perform bdc_field       using 'VBAK-VTWEG'
                              '10'.
perform bdc_field       using 'VBAK-SPART'
                              '05'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-WERKS(01)'.
perform bdc_field       using 'RV45A-MABNR(01)'
                              'hrpocf'.
perform bdc_field       using 'VBAP-POSNR(01)'
                              '    10'.
perform bdc_field       using 'RV45A-KWMENG(01)'
                              '                 55'.
perform bdc_field       using 'VBAP-WERKS(01)'
                              '2010'.
perform bdc_dynpro      using 'SAPLCEI0' '0109'.
perform bdc_field       using 'BDC_CURSOR'
                              'RCTMS-MWERT(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'RCTMS-MNAME(01)'
                              'A_THICK_MM'.
perform bdc_field       using 'RCTMS-MNAME(02)'
                              'A_WIDTH_MM'.
perform bdc_field       using 'RCTMS-MNAME(03)'
                              'A_EQUIVALENT_SPEC'.
perform bdc_field       using 'RCTMS-MNAME(04)'
                              'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field       using 'RCTMS-MNAME(05)'
                              'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field       using 'RCTMS-MNAME(06)'
                              'A_COIL_INNER_DIA_MM'.
perform bdc_field       using 'RCTMS-MWERT(01)'
                              '3.2'.
perform bdc_field       using 'RCTMS-MWERT(02)'
                              '1200'.
perform bdc_field       using 'RCTMS-MWERT(03)'
                              'IS_11513_GR_D_1985'.
perform bdc_field       using 'RCTMS-MWERT(04)'
                              '26.4'.
perform bdc_field       using 'RCTMS-MWERT(05)'
                              '26.4'.
perform bdc_field       using 'RCTMS-MWERT(06)'
                              '610'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-WERKS(02)'.
perform bdc_field       using 'RV45A-MABNR(02)'
                              'hrpocf'.
perform bdc_field       using 'VBAP-POSNR(02)'
                              '    11'.
perform bdc_field       using 'RV45A-KWMENG(02)'
                              '                 66'.
perform bdc_field       using 'VBAP-WERKS(02)'
                              '2010'.
perform bdc_dynpro      using 'SAPLCEI0' '0109'.
perform bdc_field       using 'BDC_CURSOR'
                              'RCTMS-MWERT(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'RCTMS-MNAME(01)'
                              'A_THICK_MM'.
perform bdc_field       using 'RCTMS-MNAME(02)'
                              'A_WIDTH_MM'.
perform bdc_field       using 'RCTMS-MNAME(03)'
                              'A_EQUIVALENT_SPEC'.
perform bdc_field       using 'RCTMS-MNAME(04)'
                              'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field       using 'RCTMS-MNAME(05)'
                              'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field       using 'RCTMS-MNAME(06)'
                              'A_COIL_INNER_DIA_MM'.
perform bdc_field       using 'RCTMS-MWERT(01)'
                              '3.1'.
perform bdc_field       using 'RCTMS-MWERT(02)'
                              '1250'.
perform bdc_field       using 'RCTMS-MWERT(03)'
                              'IS_11513_GR_D_1985'.
perform bdc_field       using 'RCTMS-MWERT(04)'
                              '20.084'.
perform bdc_field       using 'RCTMS-MWERT(05)'
                              '20.084'.
perform bdc_field       using 'RCTMS-MWERT(06)'
                              '610'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PDE3'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(01)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                              'X'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-TAXM1'
                              '1'.
perform bdc_field       using 'VBAP-TAXM2'
                              '1'.
perform bdc_field       using 'VBAP-TAXM3'
                              '0'.
perform bdc_field       using 'VBAP-TAXM4'
                              '0'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'FDGFDG'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\10'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-POSEX_E'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '000005'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PDE3'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(02)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                              'X'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-TAXM1'
                              '1'.
perform bdc_field       using 'VBAP-TAXM2'
                              '1'.
perform bdc_field       using 'VBAP-TAXM3'
                              '0'.
perform bdc_field       using 'VBAP-TAXM4'
                              '0'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'GFGFDG'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\10'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-POSEX_E'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '000005'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSEX'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '5'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=KKAU'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\02'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-KONDA'.
perform bdc_field       using 'VBAK-AUDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAK-VKBUR'
                              'IN15'.
perform bdc_field       using 'VBAK-WAERK'
                              'INR'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-KDGRP'
                              'CF'.
perform bdc_field       using 'VBKD-PLTYP'
                              '01'.
perform bdc_field       using 'VBKD-KONDA'
                              '01'.
perform bdc_field       using 'VBKD-BZIRK'
                              'NORTH'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\03'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-VSART'.
perform bdc_field       using 'VBAK-VSBED'
                              '01'.
perform bdc_field       using 'VBKD-KZAZU'
                              'X'.
perform bdc_field       using 'VBKD-VSART'
                              'ER'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\05'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAK-TAXK1'
                              '1'.
perform bdc_field       using 'VBAK-TAXK3'
                              'l'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-ZLSCH'.
perform bdc_field       using 'VBKD-KTGRD'
                              '01'.
perform bdc_field       using 'VBKD-ZLSCH'
                              'c'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'BDFBFDB'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\11'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=KSTC'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(02)'.
perform bdc_field       using 'J_STMAINT-ANWS(01)'
perform bdc_field       using 'J_STMAINT-ANWS(02)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(03)'.
perform bdc_field       using 'J_STMAINT-ANWS(02)'
perform bdc_field       using 'J_STMAINT-ANWS(03)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(04)'.
perform bdc_field       using 'J_STMAINT-ANWS(03)'
perform bdc_field       using 'J_STMAINT-ANWS(04)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'JOSTD-OBJNR'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-TXT_VBELN'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART    :Order Type
VBAK-VKORG    : Sales Org
VBAK-VTWEG    : Distri Channel
VBAK-SPART    : Division
VBAK-KUNNR    : Sold-to-Party
VBPA-KUNNAR   : Ship-to-Party
VBAK-BSTNK    : PO No
VBAK-BSTDK    : PO Date
VBAP-MATNR    : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG    : Qty
VBAP-WERKS     : Delivery Plant
VBKD-INCO2     : Incoterm2
VBKD-KONDA     : Price Group
VBKD-VSART     : Shipping Type
VBAK-TAXK1     : Cust Tax-1
VBAK-TAXK2     : Cust Tax-2
VBAK-TAXK3     : Cust Tax-3
VBAK-TAXK4     : Cust Tax-4
VBKD-ZLSCH     : Payment Method
VBAP-TAXM1     : Mat tax clss-1
VBAP-TAXM2     : Mat tax clss-2
VBAP-TAXM3     : Mat tax clss-3
VBAP-TAXM4     : Mat tax clss-4
VBAP-POSEX     : IMPS Order No
VBKD-BSTKD_E   : old SO in 4.6c
VBKD-POSEX_E   : old SO Item in 4.6c
Text Id        : TDC No
Text Id-ES10   : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.Lokesh

If u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra

Delivery address on item level in Sales Order causes delivery split

Hi all,
I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
Its ECC 5.0.
Anyone has experience to share on this issue?
Thanks
BR
Peter

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

Pls help- in eAM- PM

hi all,
How to delete a SET name in EAM- Preventive Maintenence. To avoid duplications the SET names needs to be deleted. Pls help
Thanks
Dinesh

Hi,
Please try this and use BSEG as an example.
1. Go to SE12.
2. Enter BSEG
3. Click Display button
4. Go to Delivery and Maintenance' tab.
5. You should be able to see Pool/cluster RFBLG.
6. Double click RFBLG and then click Where-Used list button (CTRLSHIFTF3).
7. Select Table option and click Execute button.
8. System will show all the table that belong to this pool/cluster.
For Pool/Cluster REGUC, it is only used in table REGUP.
Look at the below link
Re: Define view for cluster table?
Regards,
Priyanka.

Pls help in creating cluster view

Pls help in creating cluster view
regards
jindow

Hi,
Please try this and use BSEG as an example.
1. Go to SE12.
2. Enter BSEG
3. Click Display button
4. Go to Delivery and Maintenance' tab.
5. You should be able to see Pool/cluster RFBLG.
6. Double click RFBLG and then click Where-Used list button (CTRLSHIFTF3).
7. Select Table option and click Execute button.
8. System will show all the table that belong to this pool/cluster.
For Pool/Cluster REGUC, it is only used in table REGUP.
Look at the below link
Re: Define view for cluster table?
Regards,
Priyanka.

No shedulines due and delivery split

I encountered with two errors : they are as follows
1)No schedule lines due for delivery upto the selected date
2) delivery split due to two shipping points.
In the first case, I have checked the shedule line of the line item in the order i.e by clicking schedule lines verified the delivery date, picking is not taking place and it is showing confirmed qty as ZERO. In the order, confirmed qty is seen as ZERO.
In the second case , I have gone to VL01N, and mentioned the shippint pt. I went to mm02 checked the loading gp and shipping conditions.
Kindly suggest me what to do?
prashant

Hi,
Check if the customer is having credit limit activated. If the customer exceeds the credit limit, it blocks the open quantity and the display will not be present in the schedules. Release the customer for credit in VKM3 t-code and then try to deliver with a future date in delivery date field.
Shipping point, check in the SPRO - Logistics Execution - Shipping - Basic Shipping - Shipping point and receiving point determination - Assign shipping point. Here you check for a unique combination of shipping conditon (customer master) then loading group (material master) and delivering plant (material master) for all these you will have a shipping point. check for the same in your order. See that the combination matches with all your schedules and then delivery. It will not split
Hope this will help you out !
Regards,
Syed Nasir

Delivery split with different delivery types

Hi,
Ive got the following problem with delivery split:
In my order (type ZTA) I have two items with two different item categories (for example TA1 and TA2). For these two items two different deliveries with two different delivery types (for example item TA1 in LF1 and TA2 in LF2) should be created. For this I implemented the needed copy control and in the customizing of the order type ZTA I maintained LF1 as a default delivery type. When I deliver the order manually via Transaction VL01N, I have no problem, because the system delivers first the item which can be delivered with delivery type LF1. Then I have to start VL01N again, predefine LF2 as delivery type and then the other item will be delivered with LF2. But this doesnt work in the Batch Collective Processing with VL04, VL10A or even VL10Batch. The system cant deliver the order. And in none of these mentioned transactions I have the possibility to predefine a delivery type. I tried also a routine in the copy control on item category level where I want to switch to a different delivery type in case of the second item category. But it didnt work. And I couldnt find any other appropriate exit how to influence the delivery type on base of the item category. What cant be changed is probably that I will always have to deliver this order two times because the system wont be able to split the order in one collective processing and create two deliveries at once. That wouldnt be a big problem if I could predefine the delivery type for the second collective processing in order to get the second item delivered.
Is there anybody who can help me?
Kind Regards
Stephan

Hi,
thank you for your quick answer. That was a big help and I will do your suggested solution with the BDC.
But if I understand you correctly, you also didn't find a solution for this problem in the SAP Standard functions (without BDS)?
Kind regards
Stephan

Delivery Split - Pls Help

Similar Messages

Maybe you are looking for