Delivery to use as reference to GR - any implication?

Hello Guys,
Can you enlighten me with the above? I am trying to GR my STO and I would like to GR it with reference to STO.. My question is can I GR with an option to either use any of these 2 as reference: STO or delivery? And if I use STO for reference to GR, would there any implication? The same with delivery as reference..? What is the difference or implication if I use either STO or delivery as reference to GR? Could you let me know, please?
Thanks so much.
Regards,
Lem

Hello,
Thanks so much for your quick response. Can you elaborate and explain more, please? What particular document flow in SD are you referring to? So far I only have STO and replenishment delivery and I can view docflow only when i try to view my replen delivery? How can I know that the document flow in SD is not updated? Sorry.. I need to know more on this..
Thanks so much again.
Kind regards,
Lem

Similar Messages

Is there any downside to using a reference type library if I use Time Capsule and will do file management only from within Aperture?

Have done a lot of reading to get prepared to convert to Aperture 3 and have this question regarding setting up my library type.
I'm not a professional -just a heavy user hobbyist.
It appears that the major factors in using reference style is to backup the images with Time Capsule and always do moves or deletes from within the Aperture application.
If my architecture matters here's what I have that may be involved in photo management and editing:
iMac (latest 27" high power version with lots of memory)
Internal 2TB HD where the library is stored
External (FireWire) 2TB HD where the images are stored
External (FireWire) 6TB HD backup drive
In the future an iPad for remote work on images (when/if available) and a Mac laptop (for same remote use)
I see major downside issues to letting the library manage my files - such as inaccessibility (or awkward accessibility) to the images for other programs, and performance issues when the library gets large (thousands of images or 100+ gb in size)
The chief complaints I've seen regarding using a reference mode is the broken link issues created if file management is done outside of Aperture (adds, deletes, moves of files) and the inability to use the Vault function for backup.
One feature that I imagine I'd like to have is maximum integration with Final Cut Pro X and that's one area I haven't seen much on and would be interested to hear about if that integration is affected with the choice of managed vs referenced library types. (I like to produce film clips that are combinations of pics and video and want to be set up so that is done in the easiest fashion when working in FCP X)
I'm sure I've not seen all sides of this issue and would like to see some discussion around this question.
Thanks to everyone contributing!
Craig

Goody, Goody, you hit a few of my favorite subjects! Herewith some comments, with the usual caveats - true to the best of my knowledge and experience, others may have different results, YMMV, and I could be wrong.
I run Aperture on two machines:
-- 2007 Mac Pro with 2x2.66 GHz Xeon, 21 GB of RAM, a 5770 GPU, and multiple HD. I have about 11,000 images, taking up 150 GB. (Many are 100 MB TIFF, scanned slides)
-- 2006 Mac Book Pro with 1 2.0 GHz Core Duo, 2 GB of RAM and a 240 GB SSD.
Two very different machines.
-- Aperture Libraries are all the same - Managed or Referenced. If Managed, then the Master image files are inside the Package, if Referenced, they are outside, and you can have any combination you want. Managed is easier, but Referenced is not hard if you are the least bit careful.
-- While the sheer size of an Aperture Library is not a big issue, the location on disk of the different components can have a tremendous impact on performance.
-- Solid State Drives (SSD) read and write faster than regular Hard Disks (HD) and, what is more important, empty HD read and write much faster than full HD.
-- Aperture speed requires a combination of RAM, CPU, graphics processing unit (GPU) speed, and disk speed. The more RAM you have, the less paging you will see. With enough RAM, the next bottle neck is CPU (speed and cores) and GPU speed. But even then you will still have to fetch an image (longer if you pull the full resolution Master, read and rewrite the Version file, and update the Preview and Thumbs.
So what works?
-- RAM, RAM, and more RAM. 4 GB will work, but you will page a bit. 8 GB is much faster. On my old MacPro the sweet spot was about 16 GB of RAM.
-- Keep your Library on your fastest (usually internal) drive. Keep that disk as unloaded as possible. How do you keep it unloaded? Either buy BIG, 1 TB+ or move your Masters off onto another disk. The good news here is that as Master files are written only once and never rewritten, speed of this disk, as opposed to the disk that holds the Library, is not important. There is a one second pause as the Master is read into memory and, if you have enough RAM, that is it - the Master will never be paged out. If, on the other hand, you do not have enough RAM, and you do a lot of adjusting at full resolution, then the speed of the disk that holds your Masters will become very important due to paging.
-- I found that I picked up a tiny bit of speed by keeping the Masters on a dedicated disk. Thus, in your configuration, if you can dedicate that 2 TB FW HD to your Masters, you should see very nice performance.
Final notes on backups and archives:
-- One conventional wisdom is that you should make an archive copy of every image file before or as you load them into your system. (Aperture in this case.) This archive is then never touched or deleted.
-- An alternative approach is that you do not keep such an archive, but only the images that you have in your Aperture Library. And when you delete from the Library, you no longer keep a copy anywhere.
I do the following:
-- Card to Aperture. Card is then kept at least 24 hours until all of my backups have run. (I use three - Time Machine, Clone, and off site.)
-- I do not keep archive copies. If I decide to delete a file, my only recourse is to recover it from Time Machine during the six month cycle of my Time Machine backups. Thereafter, it is lost.
There are merits to both approaches.
Hope this is clear, correct, and responsive to your needs.
DiploStrat

Creation of new internal delivery channel using AQ

Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MS

As mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
     MSG_ID VARCHAR2(128),
     INREPLYTO_MSG_ID VARCHAR2(128),
     FROM_PARTY VARCHAR2(512),
     TO_PARTY VARCHAR2(512),
     ACTION_NAME VARCHAR2(512),
     DOCTYPE_NAME VARCHAR2(512),
     DOCTYPE_REVISION VARCHAR2(512),
     MSG_TYPE INT,
     PAYLOAD CLOB,
     ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table (     queue_table => 'MY_QTAB',
                         queue_payload_type => 'IP_MSG_TYPE',
                         multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT

Matching Delivery Specs using Media Encoder parameters

Trying to match these Delivery Specs using Media Encoder and I can't seem to find any reference to some of the parameters.
These are my Delivery Specs.
The following are my settings in Media Encoder:
My confusion is whether these settings will satisfy:
50 Mbps (Long GOP) for Video
422 Profile@HIgh Level
2 channel Stereo muxed with Video
MPEG-2 Transport Stream or MPEG-2 Program Stream
Bitrate and Buffering Details set to VARIABLE (this is the default setting at present) Is this correct for CBR file generation or does it have to do with something else in the process?
Thanks in advance for your helpful assistance.
-Barry

Barry Cohen
Online Editor
[email protected]
o: 310.481.2282
c: 818.807.8308
Young Hollywood
1627 Pontius Ave.
First Floor
Los Angeles, CA 90025
Hi Thomas,
I am trying to make the changes you have suggested:
Where do I effect the change to set Profile to "4:2:2"?? I am looking at the Advanced Settings Tab and do not see a descriptive parameter to change?
Where do I change the muxing mode to Constant? Looking on the Audio Tab I don't have that parameter either?
VBV Buffer Size has been changed to 224. I was able to find that parameter.
Thank you so much for your guidance.
-Barry

SSO to R/3 using a reference system

Hi,
I try to setup SSO between a EP6 SP2 and a R/3 4.7. I configured the backendsystem correctly because SSO works if the users have the same user id (tried it using WinGUI). In my case the user ids between ActiveDirectory and SAP differ, so I have to use a reference system. I configured it in the UME settings and now my users can personalize their user ids, but when they click on save an error message appears that a problem occured. In the log file it says:
Sep 7, 2005 5:36:20 PM # Client_Thread_10     Fatal           Exception ID:05:36_07/09/05_0002
com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
     at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:824)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:716)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:229)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:555)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Caused by: java.lang.NoClassDefFoundError
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.checkR3ReferenceIdentity(UserMappingDataModel.java:621)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.saveLogonData(UserMappingDataModel.java:475)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doHandleHTMLBEventSave(UserMappingComponent.java:144)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doRequestEvent(UserMappingComponent.java:338)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:720)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:250)
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:334)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:628)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:229)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:555)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Any idea what went wrong?
Bye,
Christoph

solved it: SAPJCO was not included in the Windows Environment Path Variable. I included D:\usr\sap\yyyy\j2ee\j2ee_00\os_libs;D:\usr\sap\yyyy\j2ee\j2ee_00\cluster\server\additional-lib
Bye
Christoph

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Currency Translation Using 'Time Reference'

Hey Experts,
Quick question.
Has anybody had experience performing the planning function 'Currency Translation' <b>BUT</b> using the 'Time Reference' field.
My goal is to have it translate the currency based on Fiscal year/period, using the fiscal 'year/period END' to determine the translation date.
However in the paremeter group for currency translation, when I click on the 'Time reference' Drop-down button to select, it's blank, and give me no choices to pick anything. Have I missed something here? Are there any other prior steps I've ignored?
I already have the fiscal year/period characteristic defined on my level.. and I've defined my 'Targ.Curr' as USD.
I can't find much documantation except for the basic help button, but that doesn't really say much.
Any advice..?
Thank All.

Hi,
If I understand you correctly, am I then to assume using the Fiscal year/Period '0FISCPER' will not work. The F1 help say it should.
And are you saying if I use Fiscal year '0FISCYEAR' and/or Posting Period '0FISCPER3' instead, it should work by giving me the option of choosing the start or end of these two fields when I click on the drop-down of the Time Reference??
The way I have this defined is as follows.
At the level I have both:
Fiscal year/Period '0FISCPER' -> 001/2006 to 012/2007.
Fiscal year '0FISCYEAR' -> 2006 to 2007.
In my Paramter Group I have the following definition:
Target Key Figure: Value in Object currency
Source Key Figure: Value in CO Currency
Exch.Rate: 001P
Char.Target.Crcy: Currency
Curr,Date: Is currenctly Flagged, but will remove it once I have the Time Reference field working.
At the Planning area, I have a characteristic relationship defined as a derivation using 'Type' reference data, whereby the Fiscal year (0FISCYEAR) is referenced from the Fiscal year/Period (0FISCPER), and the Posting period (0FISCPER3) also references the Fiscal year/Period (0FISCPER) that are currently stored in my transactional cube.
Based on the above, I still don't get anything to choose from when I click on the drop-down for the 'Time Reference' field in the currency translation.
If you could perhaps do some screen dumps of the level you defined, characteristic relationship, as well as how u defined the parameter group, that may help.
You can attach email it to '[email protected]'.
Sorry for the confusion, but I think I'm missing something obvious and simple here..!!
Thanks
Message was edited by: Ehab Mansour

How to set the value of an array element (not the complete array) by using a reference?

My situation is that I have an array of clusters on the front panel. Each element is used for a particular test setup, so if the array size is three, it means we have three identical test setups that can be used. The cluster contains two string controls and a button: 'device ID' string, 'start' button and 'status' string.
In order to keep the diagrams simple, I would like to use a reference to the array as input into a subvi. This subvi will then modify a particular element in the array (i.e. set the 'status' string).
The first problem I encounter is that I can not select an array element to write to by using the reference. I have tried setting the 'Selection s
tart[]' and 'Selection size[]' properties and then querying the 'Array element' to get the proper element.
If I do this, the VI always seems to write to the element which the user has selected (i.e. the element that contains the cursor) instead of the one I am trying to select. I also have not found any other possible use for the 'Selection' properties, so I wonder if I am doing something wrong.
Of course I can use the 'value' property to get all elements, and then use the replace array element with an index value, but this defeats the purpose of leaving all other elements untouched.
I had hoped to use this method specifically to avoid overwriting other array elements (such as happens with the replace array element) because the user might be modifying the second array element while I want to modify the first.
My current solution is to split the array into two arrays: one control and one indicator (I guess that's really how it should be done ;-) but I'd still like to know ho
w to change a single element in an array without affecting the others by using a reference in case I can use it elsewhere.

> My situation is that I have an array of clusters on the front panel.
> Each element is used for a particular test setup, so if the array size
> is three, it means we have three identical test setups that can be
> used. The cluster contains two string controls and a button: 'device
> ID' string, 'start' button and 'status' string.
>
> In order to keep the diagrams simple, I would like to use a reference
> to the array as input into a subvi. This subvi will then modify a
> particular element in the array (i.e. set the 'status' string).
>
It isn't possible to get a reference to a particular element within an
array. There is only one reference to the one control that represents
all elements in the array.
While it may seem better to use references to update
an element within
an array, it shouldn't really be necessary, and it can also lead to
race conditions. If you write to an element that has the
possibility of the user changing, whether you write with a local, a
reference, or any other means, there is a race condition between the
diagram and the user. LV will help with this to a certain extent,
especially for controls that take awhile to edit like ones that use
the keyboard. In these cases, if the user has already started entering
text, it will not be overwritten by the new value unless the key focus
is taken away from the control first. It is similar when moving a slider
or other value changes using the mouse. LV will write to the other values,
but will not rip the slider out of the user's hand.
To completely avoid race conditions, you can split the array into user
fields and indicators that are located underneath them. Or, if some
controls act as both, you can do like Excel. You don't directly type
into the cell. You choose w
hich cell to edit, but you modify another
location. When the edit is completed, it is incorporated into the
display so that it is never lost.
Greg McKaskle

"Index: 0, Size: 0" error when using lexical references

I got "Index: 0, Size: 0" when using lexical references in data template. Can any body tell me what happen? The detail error is:
[042308_084608187][][EXCEPTION] java.lang.IndexOutOfBoundsException: Index: 0, S
ize: 0
at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492
at com.sun.java.util.collections.ArrayList.get(ArrayList.java:306)
at oracle.apps.xdo.dataengine.DataTemplateParser.getParentDataSource(Dat
aTemplateParser.java:1802)
at oracle.apps.xdo.dataengine.XMLPGEN.writeDefaultGroup(XMLPGEN.java:329
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:2
84)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:271)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:213)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:252)
at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProc
essor.java:390)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.ja
va:355)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.callDataP
rocessor(AdvancedQueryBoundValue11.java:212)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.getValue(
AdvancedQueryBoundValue11.java:101)
at oracle.apps.xdo.servlet.ReportContextImplV11.getReportXMLData(ReportC
ontextImplV11.java:399)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:143)

Here is the data template, the lexical reference is &where_clause, thanks.
<dataTemplate name="Tamplate" dataSourceRef="dmdb" defaultPackage="RRBY_PKG">
     <properties>
          <property name="debug_mode" value="on"/>
     </properties>
     <parameters>
               <parameter name="BUName" dataType="character"/>
          <parameter name="StartDate" dataType="date"/>
          <parameter name="EndDate" dataType="date"/>
     </parameters>
<dataTrigger name="beforeReport" source="RRBY_PKG.dynamic_where(BUName => :BUName)"/>
     <dataQuery>
     <sqlstatement name="GroupByAgent">
               <![CDATA[SELECT
NVL(businessunit.name, 'Unassigned') UNITNAME,
queue.name QUEUENAME,
NVL2(businessunit.name, 'Unassigned', businessunit.name || ': ' || queue.name) FULLQUEUENAME,
COUNT(queueEvent.requestNumber) REQNUM
FROM((((queueevent queueevent
INNER JOIN assignment assignment ON queueevent.assignmentkey = assignment.assignmentkey)
INNER JOIN datedim datedim ON queueevent.datekey = datedim.datekey)
INNER JOIN businessunit businessunit ON queueevent.businessunitkey = businessunit.businessunitkey)
INNER JOIN queue queue ON queueevent.forwardedqueuekey = queue.queuekey)
INNER JOIN timedim timedim ON queueevent.timekey = timedim.timekey
WHERE dateDim.FULLDATE >= TO_DATE(:StartDate, 'yyyy-mm-dd')
AND BW_COMMON_DATEADD('s', timeDim.SECONDOFDAY, BW_COMMON_DATEADD('s', queueEvent.EVENTDURATION, dateDim.FULLDATE)) > TO_DATE(:StartDate, 'yyyy-mm-dd')
AND BW_COMMON_DATEADD('s', timeDim.SECONDOFDAY, BW_COMMON_DATEADD('s', queueEvent.EVENTDURATION, dateDim.FULLDATE)) < TO_DATE(:EndDate, 'yyyy-mm-dd') AND &where_clause
group by businessunit.name, queue.name]]>
          </sqlstatement>
     </dataQuery>
</dataTemplate>

IBook G4 freezes up when using external firewire drive. Any ideas??

I have an external hard drive formatted as Apple Partition Map, with Tiger 10.4.11. I can boot from that drive, but after a while... say, about a minute after it shows everything on the desktop, the iBook freezes.
If I start up from the iBook, I have no problem accessing the files and there are no freezes. I'd like, however, to start up from the external drive during this week while my MacBook Pro is in the shop. That way, documents, etc. will remain up to date, I can use various applications I'm used to, and won't have to go through the hassle of transferring settings for various programs to the iBook (or the programs themselves).
Any ideas what's going on here or how to fix it?

Ronda, we're talking past each other! I wasn't trying to use a cloned drive (MBP or iBook) in any of this!
What I had learned from experience (and from advice here and on the net) was that if you wanted to use an external drive with both an iBook and a MacBook Pro, you needed to format the drive as an Apple Partition Map. And that is true.
Clearly wrongly, I assumed that if I did a fresh install of Tiger using an Apple Partittion Map, it could boot an iBook. Clearly, an Intel-Mac installs something in that scenario that makes the drive only bootable from an Intel-Mac. I had mistakenly thought it was the partition scheme the determined which laptop it could be booted from and used with!
For my future reference--and for any one else who might be in this situation--here's the solution.
1. Format the external hard from the iBook.
2. Then connect it to your MBP or other more recent device, and drag your home folder and needed programs over to the drive.
3. Now, you can boot the external drive using your iBook.
4. Any changes to documents, mail (e.g., Eudora), etc. will register on that external drive.
I wish I had thought of that, or been advised to do that. It would have made short work of reconstructing the MBP's home folder contents on its return--a simple drag and drop operation!

Using cross-references in the index?

Wondering if there are any suggestions out there for using
cross-references in the index.
I don't think using the "See also" option is what I'm looking
for; what I'd like to do is create index entries with a cross
reference next to them.
I tried this by creating an index entry and typing (See
"other topic name") next to it, but when I compiled the project
this index entry was not included because I did not have a topic
assigned to it.
Is there any way to create a cross-reference index entry
without a topic assignment? Or are there other workarounds that you
use?

Index cross references are designed to enable you to have
index keywords that when clicked redirect the user to another
keyword. For example I use them for acronyms to redirect users to
the longer version. Are you cross references topics inside the
project? If so, can't you use the index cross references by
indexing in the same manner? If the cross reference you want is
outside the project, using the index is not the way I'd suggest.
Why not use a link in a topic to a URL, file, etc. You may be able
to do what you want through a redirect topic but I haven't looked
into this. Come back with some more details if I am off the
mark.

Delivery creation using VL10C

I am currently using VL10C to create a single delivery for mutliple sales orders and it is working well. The users want to be able to view the delivery prior to the number being assigned to ensure that it has created as expected. There are two options in VL10C:
Foreground - This will create a single delivery ignoring requested quantities but it will allow the delivery to be viewed prior to generating the number
Background - This combines deliveries but does not provide an opportunity for review prior to the number being generated. The net effect of this is that if something is wrong the delivery needs to be deleted. This is what I am trying to avoid
I have two questions:
1) Using standard functionality is there any way to execute VL10C in the back ground allowing sales orders to be combined into a single delivery while still being able to review the result of the delivery creation process prior to saving?
2) If there is no way to do this via standard config, is there a user exit or BADI that can be used to achieve this result? If so what is it?
Thanks in advance.

Always Back ground process you will not able to see background what is happening and you will able to see once delivery is created .For this case you are deleting outbound delivery if you are not satisfied with the results.
In that case you have to use fore ground process to create the delivery.If you User exit Badi also once you will able to see once delivery document generated.
Please follow Fore ground process and you have control on it.

MIRO planned delivery cost and document reference

Hi
I create a purchase order with one position including the planned delivery with flag Indicator: GR-Based Invoice Verification. OK
I create the good receive with reference to purchase order: in Migo I update field xblnr Number of External Delivery Note. OK
I enter an invoice to reference to purchase order number including the planned delivery costs using transaction MIRO: SAP enter the document and in RSEG update 2 record: on first record (refer to material) the field rseg - LBRNR (material document GR) and the field rseg - XBLNR are update BUT on second position (refer planned delivery cost) the fiel rseg - LBRNR (material document GR) and the field rseg - XBLNR are missing.
I wanti to updat it. Is it possible?
TKS

Help me....

Deplyment error while using service reference

Hi All,
I'm facing similar error where I get the following error when i try to run the application.
Following error i get when i try to deploy
Failed to prepare application ''sap.com/asp_all_sites'' for startup. Reason= Clusterwide exception: Failed to start dependent service ''PORTAL:sap.com/com.sap.compatibility50.cache.cache'' of application ''sap.com/asp_all_sites''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I have added this in Sharing references but yet it doesn't help me. I'm using ICacheService in my code.
This **URGENT** Deplyment error while using service reference i was following but could not arrive at any result
Please advise
Thanks
Srikant

Hi All
I'm getting following error whenever I deploy:
11-dec-2007 18:03:17 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[009]Deployment finished with warning
Settings
SDM host : aixlp203
SDM port : 52618
URL to deploy : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Result
=> deployed with warning : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Finished with warnings: development component 'zsp_all_sites'/'nl.essent'/'local'/'20071211180226'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application nl.essent/zsp_all_sites and wait. Reason: Clusterwide exception: server ID 263194450:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/zsp_all_sites cannot be started. Reason: it has hard reference to resource com.sap.portal.compatibility50.cache with type application, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580) at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
The things I have done so far:
1. Deployed the custom library and refered in library references. Its the same name as it is Visual Admin
2. Added Cache API Jar file as external Jar file; added the Sharing reference and also all the steps mentioned in the following link:
Webdynpro DC and J2EE DC
3. The DC builds properly but fails at deployment
My question is there any way that I can manually start the service.
I find the application in Server >> Services >> Deploy is with invalid kind of symbol (neither blue checked symbol / red cross symbol). How do I restore the application
I using ICacheServices in my code using Sharing references
like (ICacheService)WDPortalUtils.getServiceReferences("com.sap.compatibility50.cache.cache"). is this right
Please let me know
Thanks in advance
Srikant

Ejb-link is still required when using local references?

Hi!
In BEA's link (http://e-docs.bea.com/wls/docs81/ejb/DDreference-ejb-jar.html#1114738) there is the following comment for weblogic-ejb-jar.xml element 'jndi-name':
"Assigning a JNDI name to a bean is not recommended. Global JNDI names generate heavy multicast traffic during clustered server startup. See Using EJB Links for the better practice."
Since we're using local references (local-jndi-name) to access our ejbs instead of remote references, is this still recommendation still pertinent?
Thanks
Christianne

It is enough if you add the ejb-ref & ejb-link in the session bean. The
session will look up relative to java:comp/env
The following doc shows an example of accessing an ejb from a web app using
ejb-link.
http://e-docs.bea.com/wls/docs81/webapp/components.html#146848
--Sathish
<Christianne Carvalho> wrote in message news:[email protected]..
I'm not getting very well how the ejb-link is used. In my case I have
entity beans that are referenced in session beans.
In my entity beans I have the following XDoclet tag.
* @ejb.bean
* name="ProductDescription"
* display-name="ProductDescription"
* jndi-name="ejb/ProductDescription"
* local-jndi-name="ejb/ProductDescriptionLocal"
* view-type="local"
* type="CMP"
In my session bean I'm currently getting the reference for the entity bean
using the following code:
productDescriptionLocalHome=(ProductDescriptionLocalHome)
lookupLocalHome(ProductDescriptionLocalHome.JNDI_NAME);
If I add the following XDoclet tag to my session bean, in ejb-jar.xml a
<ejb-link> is created inside <ejb-local_ref> tag.
* @ejb.ejb-ref ejb-name="ProductDescription" view-type="local"
Considering the info above:
1) In the entity bean, is there any extra tag to define the ejb-link or is
the ejb-link only defined in the session bean?
2) Re session bean, only adding the @ejb-ref xdoclet tag is enough for
using the ejb-link or do I also have to change my lookup? If I do, what do
I have to search for in the lookup?
Thanks!

Delivery to use as reference to GR - any implication?

Similar Messages

Maybe you are looking for