Delivery type RLL

hi all
i want to active/inactive availability check for one delivery type like RLL in outbound delivery:Return delivery to vendor not for all delivery.
how can do it?
Regards
Ramin

IMG > Sales and Distribution > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning .......
- Define Procedure For Each Schedule Line Category
- Determine Procedure For Each Delivery Item Category

Similar Messages

RL and RLL Delivery type

Hi All,
In other threads, I have seen that the delivery type RL is used in Movement type 161 ( Returns to Vendor with reference to a Purchase Order )
and delivery type RLL is used in movement type 122 ( Return delivery to Vendor without reference to PO ).
But how does one create a delivery with a 122 movement type ? I thought that if we use MIGO Return Delivery and refer the Goods Receipt material document (101 movement type), the stock gets reduced automatically from our location. There is no delivery being created here. Is there a way to create a delivery using 122 movement type ? If so, how is it to be done ?
Sathya

Hey Sathya,
I am sorry for respondng late but I can see that this thread is not answered yet.
Scenario 1 - When you are returning goods with MIGO Return Delivery and refer the Goods Receipt material document (101 movement type), then there is a BOX - Via Delivery. If you tick that box then system will post a Outbound delievery and DO NOT post material document and stock still be there in your premises. When you go to VL02N and pick the quantity and do the PGI then system will post automatically a material document of movement type 122.
Scenario 2 - If you are going to return the goods with PO and ticking returns button in that. In that case you can create a outbound delivery via VL10B and then do the picking adn PGI. IN this case system will post material document of movement type 161.
Hope it helps you.

Output type for Proforma Invoice for return delivery from delivery type RLN

Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.

Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks

Vendor returns with delivery(new delivery type)

Hi,
I configured vendor return process with delivery. it's working fine with delivery type RLL but when I try to copy "RLL" and create new delivery type it's still picking delivery type "RLL" and not the new delivery type.
My configurations
1. Create new delivery type copy of "RLL" - LE - shipping - new delivery types
2. Assigned new delivery type to all the plants - MM-Purchase- purchase order - return orders.
Am I missing something?
Regards,
R.S
Edited by: Jeyakanthan A on Dec 21, 2011 11:04 PM

I found the missing config. delivery type determination for outbound delivery was missing. It's working fine now.

Return del to vendor- How delivery type determination

Hi All,
When i am creating return delivery to vendor in MBRL transaction code with reference to Material document, the system is creating delivery with RLL document type, want to understand how the system is determining RLL document type for 122 movement type vendor return delivery.
Do we have any assignment for delivery doc.type determination like how we have PO returns delivery.
Thanks in advance!
Regards
Lakshmikanth

Got the solution from SAP note 359247, we need to do the configuration as suggested in this Note.
The steps are:
1. You must add an entry to the domain fixed value for the domain DLVTP: Fixed value RL. Short text: Return delivery to vendor - this is already available in ECC 6
2. Use transaction SM31 to maintain the view V_156Q_VC. Go to movement type 122 and change the delivery category from OD to
RL for all entries with movement type 122.
3. Use transaction SM31 to maintain the view V_156Q_VC. Go to movement type 161 and change the delivery category from OD to
RL for all entries with movement type 161.
If we complete setp2, the system will determine RLL delivery type which is correct.
Regards,
Lakshmikanth

Issue while posting using goods issue for delivery type NL

Hello Experts,
I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery)
When i am trying to post the goods issue from supplying plant, I am getting following error
"Account type K is not defined for document type WL".
Delivery type NL should not be used to issue stock to vendor but I am not issuing it to any external vendor , issuing the stokc only to a receiving plant.
Please help to understand why i am getting this error.
Regards,
Nish.

Hi,
If you are doing an STO Scenario, Check whether you have created the supplying plant as a vendor.
The Vendor Account group should be plants.
Also check whether you have given the plant in the vendor master Purchasing Data - Extras tab in the menu click on add purchasing data & check.
If you haven't assigned this, do the same & create a fresh STO & check.
Hope it will work.
Thanks & Regards,

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Using Different inbound delivery type?

Dear experts,
In the goods receipts process we currently are using the standard inbound delivery type "EL" with the standard item category ELN, which is not "Relevant for putaway".
We are assessing the possibility of start using WM in one of our plants. So, I found out that the we should be using a item category (in the inbound delivery) with the field "Relevant for putaway" flagged. Like, for example, the standard WIDN (maybe together with the standard inbound delivery type WID). But only at those plants with WM!
The issue is that as far as I know the inbound delivery type determination depends on the "Internal Confirmation Categories":
So for the type "2 Shipping Notification" only one delivery type can be chosen, how are we suppose to do it plant dependent?
It looks like a unique delivery type should be used in the client?
Thanks in advanced,
Fortian
P.S.: I already read SAP notes 214604 & 201655 but they are not being helpful so far... Maybe I'm missing something.

From your post I understand that the current plants are IM managed.
So for these plants the put away relevancy will not have any effect so if you enable the put away relevancy for the EL delivery type there will be no impact on the IM plants and for the WM plant the put away will be relevant.
Now the usage of the put away relevancy will also depend on which transaction you are using for posting a goods receipt. If you post via VL32N then you will first have to perform the put away step and then the GR posting. If you use the MIGO/MIGO_GR transaction then the goods receipt in WM will also be posted before the put away happens.

Delivery type determination in case of returns to vendor without return PO

Hello Gurus,
When we create Return PO, and when we want to created delivery for this PO , we assign delivery type RL to the PO in SPRO.
Now when I return the material thorugh MIGO (without return PO) with delivery check box active, system determines different delivery type than RL. My question is that where do we assign this delivery type and how the system determines this delivery type in case of returns to vendor without return PO.
Thanks
Pravin

Control parameters at movement type level determine the delivery type created. I guess you are using MvT 161. Try configuring delivery category for MvT 161 in OMJJ.
Hope this helps.
Rajiv..

Customizing to do billing using free of charge delivery type

Hi Friends
    I have the following task to do in urgent.
Usually in free of charge delivery, billing is not needed,
but my task is I have to make customizations so that
billing should be needed(have to do billing).when selcting free of charge delivery type.
Flow is like this
   Free of charge delivery->delivery->billing
Please let me know the customizing to do......
             Thanks in advance...........
Regards
Sam

Hi Sam
Check the following links:-
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fe42545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/e7/c1dec80cdf11d28a250000e829fbbd/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa68545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa34545a11d1a7020000e829fd11/frameset.htm
Hope the above links are useful.
Thanks
G. Lakshmipathi

Automatic determination of Delivery type and Billing type in a sales order

Hi,
I want to know that in a sales order cycle, how does automatic assignment of delivery type and billing type takes place after we create a sales order?
For example,when I create an outbound delivery for a sales order of type normal (OR) then in that case how does the system knows that it has to create an outbound delivery of type LF.How does the system propses it automatically and same is the case of billing document.

Hi
In customising the sales document type (Tcode VOV8) -
specify the default Delivery type in the field DELIVERY TYPE in the 'Shipping' area of the sales document type customisation.
Similarly you can specify the billing type in the BILLING area for both Delivery related billing and Order related billing.
Thanks,
Ravi

Delivery Output determiantion using Delivery type & Item category

Dear all,
I am facing a problem while triggering output using Delivery type/Item Category access in access sequence xyz. I have maintained the condition record for this access and did all the necessary customization settings.
When i maintain the condition record for other access in Access sequence xyz the out put is being triggered.
After some analysis i found that the Delivery type/Item category is using different communication structures.
ie. Delivery type is using KOMKBV2-LFART. where as Item Category is using KOMPBV2-PSTYV. The output is a header output.
can any one explain the problem here in maintaining different comm structures for an access for generating header output.
Thanks in advance for your inputs.
Best Regards
Satish

Hi,
You mean to say its not triggering the output automatically.....
If that is the case then goto the condition type in IMG and in tab "default values" make the dispatch time as "send immediately when saving the application" this will automatically triggers the output based on the condition records.....
Regards
Bageerath

Delivery type LR cannot be invoiced with billing type RE?

Hi,
I am refering below flow to create an return order, but face an error when creating credit billing document:
ret sale order(RE)-ret delivery(LR)-post goods receipt(stock will be restored in corresponding storage loc)---credit for return(RE)
Error msg: " Delivery type LR cannot be invoiced with billing type RE;
Check the table entries for the copying control of billing
documents and add the missing entries as necessary.
Make the appropriate settings in Customizing if you have
the authorization to do so."
So i guess i might need maintain corresponding copying control for 'delivery document to billing document'...As the source order type is LR, and target order type is RE...I checked SPRO and found there are below inputs needed. May i know what kind of data should be inputed normally??
"Copying requirements
Determ.export data
Assignment Number
Reference number"
Thank you very much!!

Hi
In standard SAP credit memo for sale returns with refrence to return order only. (RE). Thats why you are getting this error. If your requirement is to refer the delivery quantity for the credit memo then you can do any one of the following
1. Change the copy control setting for Return order to Credit memo.
    Go to VTFA transaction and select your return order type (RE) and Credit memo type (RE) and go to item category level and select your returns item category (REN) and change the billing quantity to 'D' -Delivery quantity.
    Now create your credit note with reference to your returns sale order. (not delivery). Onlly delivered quantity will be copied to the credit memo.
2. If you want to create return credit memo with reference to your return delivery then follow the first two guy's reply. Also you have to do one more setting at your return order document type (RE).
   Go to VOV8 and enter ur return order type and go to details then enter the return credit memo type in the delivery related billing field. (FKARV) in the billing section.
Regards
Shiva

Delivery typ

Dear SAPpers,
there are different delivery types in SAP System. For this reason i would like to know which type of functions in SAP does a delivery type control?
Thanks for helping
It will be rewarded

Hi
Delivery type controls many important functions. Few of them, I have mentiond below.
A Delivery type controls,
- Whether an order reference is required to create the said Delivery or not.
- In standard Storage location is determined in Delivery , but it is determined based on a rule (MALA, RETA & MARE in standard).
Which rule will be used to determine Picking/Storage location is controlled in the Delivery type.
- Whether Route will get redetermine during Delivery for the said Delivery Type or not (Route can be re-determined during delivery based on weight).
- Whether rescheduling should take place during delivery or not.
Delivery split by warehouse numbers. That means whether delivery should be splitted if the items are meant for different warehouse or not.
- Beside these above control functions, you can also control what is the Output determination Procedure, Text determination Procedure and Partner determination Procedure will work for the said Delivery Type.
Hope, it will be helpful to you.
Regards

Control delivery type for mvt type 313

Hi
Regarding SLOC to SLOC transfer postings, I have a couple of questions:
Using movement type 313 (unr. use stock SLOC to SLOC) in our SAP system automatically creates a delivery in the background. Where can I configure what delivery type I would like to use for this purpose? Also, is there any settings I can do for ATP checks for this? I believe this is standard SAP functionality so a IMG menu path would be very much appreciated.
Brgds,
Lars

Thanks.
However, I am not sure that helped me very much.
What we would like to do is to achieve a scenario where we move stock that is in QI and Blocked stock, in a similar way as with movement type 313. I am not even sure that is possible to do with a delivery? We use the deliery generated from movement type 313 to send with IDOC to one of our 3PL warehouses, managed by another company.
When I look at it, I can find movement type 325 to move Blocked stock from one SLOC to another, but is it possible to do with a delivery (generated in the background)?
Brgds,
Lars

Delivery type RLL

Similar Messages

Maybe you are looking for