Dell 1907FP for G5?

Does anyone know whether Dell 1907FP would work with G5 1.6GHz with GeForce FX 5200 (64MB)?
Thanks

The 1907FP will work fine with your Nvidea 5200.

Similar Messages

Can I easily use a Dell monitir for my MacBook?

Can I easily use a Dell monitor for my MacBook?

Couple thoughts:
1. ALWAYS put the drive in that fits the way it's suppose to. not a good thing to put one in that doesn't fit right as it can cause issues with ejecting disc or damage other parts.
2. the +R stuff seems to hold up better than the -R. I only use +R discs now, I've seen a few -Rs fail after time & have spoken to PC people that had the same thing.
OWC sells the drive that fits your machine & burns everything CD & DVD wise. http://eshop.macsales.com/shop/superdrive/MacBookPro17

Connecting 3560 with Dell 6248 for Storage Migration

I am looking at an old test and dev virtual infrastructure configuration that was set up with a 1GB Linksys Switch and a Dell 6248 Switch (attached pic is a representation).
The reason given for the Linksys in the config is it was the only 1GB switch available at the time when the SAN had to be installed and there were no more available ports on the 6248.Running Dell Dpack reports show latency issues when migrating from an EqualLogic Volume to a MD3200 volume and from the MD3200 to Md3200 volumes (on the order of 30-45 minutes for a 20GB VM). Migrating from EqualLogic volumes to EqualLogic volumes is in seconds.
I think the Linksys is the issue as does our Dell reps. We are looking at replacing the Linksys with a Cisco or another L2/L3.
I have a Cisco 3560 installed but am not familiar with configuration. I downloaded the Cisco Network Assistant (CNA) in order to configure the switch into the environment via a web browser. As noted in the infrastructure pic, the SAN traffic is isolated to VLAN 10 on the Dell Switch. In the second pic, I show the CNA and I am setting up a VLAN 10 on the Cisco switch and then want to connect the Md3200 to the Cisco which will be connected to VLAN 10 on the Dell Switch for access to an EqualLogic SAN
I am not sure I have the correct menu setting in the CNA for setting up VLAN 10 or if this is the best option?
Any help would be appreciated.
Thanks

Hi,
I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
I never had issues using the current Dell PE package for MDT.
At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
and all my systems mentioned abobe have no issues connecting to the deployment share.
(btw: I have also some older E6400, E6410 and O390 I do no longer support, they
are supported by the pack Dell-WinPE-Drivers-A05.CAB according
to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
I'd
suggest you start over with your deplyoment share using at least MDT2012 Update 1.
Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
When configuring the Windows PE settings of your deployment share select "PE
Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives.

Can I connect my iphone to a Dell 1907fp monitor via a usb to watch TV? I cannot get it to work!

Hello, I am trying to connect my iphone to a dell 1907fp monitor via a usb cable, but it doesn't go past the test screen. Any pointers?

Not possible with a USB dock connector cable.
http://www.ehow.com/how_7665220_connect-monitor-iphone.html

Considering a Dell U2711 for MacMini Server

Hi All,
I am planning to buy a MacMini Server to go with my Dell U2711 Display.
I am a bit confused regarding the means of connecting the Display to MacMini for running at 2560 x 1440 resolution.
Apple tells on MacMini specifications page, that output through HDMI is limited to 1920-by-1200.
That said, I am left with the "Thunderbolt" way to achive the native resolution of 2560 x 1440, right?
So, what cable should I use to connect the display through thunderbolt port?
Some articles suggest using the so called "Mini DisplayPort to Dual Link DVI" Cable to do that, but then isn't is a misleading naming for a thunderbolt cable?
I would expect something like a "Thunderbolt to Dual Link DVI" cable.
Thanks!

Iam buying this model, have tou tried 1080p videos external monitors anf full hd flash videos from vimeo?
please let me know
siaco wrote:
Just though I should fill in a bit here, as I have now bought this laptop and running Arch 64bit on it. So if any other users are considering this laptop, here are a few lines about it:
I have it up and running with LUKS disk encryption, everything works fine so far. I'm running XFCE with just a minor problem that the bottom panel is kinda blinking 3 or 4 times right after boot. Havn't tested webcam nor bluetooth, but sound and everything else seems to work fine.
Two of my biggest problems were to get the wifi up and running and to get an acceptable performance when viewing videos in full screen. As for the wifi; just me not understanding that I needed a kernel module AND a firmware.. (If someone wants to fill me in on why we need a firmware AND a kernel module/ driver, I'd be glad.) I installed the iwlwifi-5000-ucode without knowing I also needed the iwlagn module too. After that was fixed, I am now using network manager with no problems.
I have also had some problem with the Radeon 3670. The performance was bad in full screen videos when I used the xf86-video-radeonhd. (I followed arch wiki). It didn't help to use vide-ati neither, and no settings in the xorg.conf did fix my problem. I also noticed that DRI was failing in xorg.log. After alot of trying I decided to try the git-versions which are found in the AUR. I'm happy to say that I can now watch 720 (the only video resolution I have tried yet) with acceptable quality
All in all, I'm quite happy with the computer so far. A bit warm maybe. Oh, and the screen (full HD version) is SOO nice :-)

Dual Dell Displays for my Macbook Pro Retina (Late 2013)

So I am looking at purchasing two of the new Dell Ultrashapr U2414H monitors to hook up with my Macbook Pro Retina. I have been trying to figure out the best way to connect both of the screens before I order them and I was hoping someone on here could offer guidance.
Connectors for the U2414H:
     1. 2 HDMI(MHL) connectors
     2. 1 Mini DisplayPort
     3. 1 DisplayPort (version 1.2a)
     4. 1 DisplayPort out (MST)
Also, if anyone has any ideas of a better monitor that I should look into PLEASE let me know. I am very open to suggestions on what types of monitors go the best with the Macbook Pro Retinas.
Thanks!!!!

I have just purchased a MBPr 13" along with 2 x Dell U2414h monitors in the hope of being able to daisy chaing the monitors. If i enable displayport 1.2 on both monitors then i end up with the 2 dells mirrored.
If i plug the monitors both directly into the mac over minidisplayport to displayport cables then i have 3 displays running (the MBPr and the 2 x Dell's). What i really want is to be able to daisy chaing 1 of the dells of the other one and then connect that one to the MBPr. But i cant work out how to stop them being mirrored.
Anyone actually got this working?

Buying a Dell monitor for my MacBook Pro

Hey people,
Sorry for being a newbie with this forums, I don't really know if this question should be posted here, considering I will use the monitor with my rMBP or if I should post this at the peripherals section of the forums.
Anyway, I'm in doubt between buying a Dell U2412M and the Dell U2414H, but I've seen people saying they had problems with both of them. Basically relating to making the DP ports to work with and sometimes about the amount of colors displayed (some people said the monitors wore not working at 8 bits (16.7m colors) when connected by HDMI and DP, due to the computer recognizing the monitors as TV screens or something like that) and that there is an Issue with the HDMI due to the nVidia graphics card. Also there's an issue with the monitor going to sleep mode and not coming back without re-plugging it.
My main questions are related to the connectivity (if the mDP works well considering I will use it for both monitors, I'm not thinking about buying converters to use DVI or even using the HDMI port); to the fact that one of the screens is 16:10 and the other is 16:9 (I don't know if that makes much difference, I will use the computer for work (some CAD applications and 3D rendering) and sometimes for photography editing after the renderings). The fact about the USB ports being 2.0 with the 2412M is not an issue at all.
As I heard both monitors are pretty decent concerning color reproduction, with the 2414H coming calibrated from factory and the 2412M being better if properly calibrated (according to TFT Central).
And the last question, IF somebody has the 2414H is if it could work as a TV (I would use an outside receiver (such as cable TV and Apple TV) and connect it to the HDMI port, but for that I would need the monitor to put the sound out from the audio connector, anybody know if it works?)
So, if anybody could give me any information about these monitors I'd be pleased. Or maybe other suggestions I'd be glad (My budget cannot go beyond the price of those Dell)
Thanks in advance,
Best regards.

Yes, if it's a Thunderbolt computer, but you will need to connect another Thunderbolt device (such as a disk drive) between the displays.

Can I hook up my Dell Latitude for using iMac as display?

the Dell has VGA & HDMI so I wonder if it will work using a Moshi Mini DisplayPort to HDMI-adapter or similar?

If I understood you, you want to use your iMac as a display for the Dell Latitude.
See > http://support.apple.com/kb/PH11302 27-inch iMacs and iMacs with Thunderbolt ports can be used as a display, and Apple says that this feature works only for other Macs.
That's not exact and that's not the truth because an iMac can be used as a display for PCs, but the PC must have a DisplayPort or a Thunderbolt port. If your PC hasn't got DisplayPort, you can't use the iMac as a display

Computer recomendations, Dell's For LV8 using 500Ks/S 6031E PCI card?

Ok So im going to buy a computer for recording data using LV8. What are the requirements for the computer?
FSB speed? is 533 enough? 800?
Ram? 256MB DDR2 SDRAM at 400MHz -1 DIMM
Processor? Intel® Pentium® 4 Processor 521 w/HT Technology (2.8GHz,800FSB)
Computer will be a Dell, and im sure more is better with everything. But what is the minimum i need as to not choke the capacity of that card.

Vr6...
I would presume that the 6031 card handles all it needs via onboard hardware WRT signal acquisition and timing. It is the post processing in software that will tax the PC hardware. If I am wrong here, someone please set the record straight.
I would bump up the RAM as suggested by NI in the LV 8 Upgrade notes to at least 512MB.
Personally suggest you go with 800MHz FSB
Video? At least 1024x768 capable per upgrade notes. If application is graphics intensive, I would suggest a dedicated AGP or PCI-e card over an on-board video adapter.
Hard drive- probably not an issue WRT speed or capacity. LV needs 1.2G for full install. SATA's are faster than IDE's
At least one open PCI slot if going with the PCI version of the 6031
That's all I can think of
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

HT202856 Dell P2715Q for 2013 Mac Pro.

The new Dell P2715Q 4K monitor looks to be a technically compatible monitor for the new Mac Pro. I see it supports DP 1.2 and MST.
Anyone using this monitor and and vouch for its use.
Thanks.

Hi,
I just setup a pair of these P2715Q monitors with my 2013 MacPro using the supplied MiniDisplayPort to Displayport cables. The screens look fantastic. The main issue I'm having is after restarting or cold starting the computer. Both monitors appear and only show a blank desktop. No menu bar, no Finder icons, etc.
The only fix so far is to power off one of the monitors - then back on. Then all is fine. I've unchecked the Mission Control thing to allow displays to have separate spaces. On a normal startup - the second monitor is usually just a blank desktop. It's like they are both showing that blank desktop.
You mentioned you were having similar issues. Any other resolution to this?
I ordered a pair of minidisplayport to minidisplayport adaptors to try - incase the rub is with the included cable configuration. I've tried resetting PRAM, NVRAM, etc. - Tried different thunderbolt ports.
Actually - when trying different thunderbolt ports - things got wonky in that the second monitor stopped being acknowledged by the computer. I kept moving the thunderbolt cable around - then it finally came back on. Not fun.
Another strange issue yesterday was when I sat down to work - both monitors were in sleep mode (computer still running though) - the primary monitor wouldn't activate. Even after a restart. I couldn't even power cycle the monitor with the power button. I ultimately had to pull the power cord on the monitor to get it back. Again... not fun.
One thing to note as well - My primary monitor is Rev 01... the secondary was built 2 months earlier and shows Rev. 00. I'm waiting for them to replace the second monitor. These guys update the firmware and other items and never tell anyone what's changed. But I sure want the most current build.
Any thoughts? - I'm running 10.10.2.
Thanks,
Sam

Formating a Dell server for installing oracle10g

hi all,
I want to install oracle10g Rel2 in my dell SERVER . but before installation i want to format my server because i just want Opering System and Oracle database at this server nothing else. but my network administrator told me formating a server decrease the efficieny of the server so install oracle without formating the system. IS it true ?? because i don't believe that formating a system decrease its effeciency.
Regards

That's no bad idea. XP Professional is still a desktop system, appropriate for doing homework. You should run Oracle on a server system, in the documentation (installation guide) there are some hints, which Windows components you don't need for running Oracle on the system.
Werner

LIV-Planned Del.Cost for Multiple Purchase order.

Hi Gurus,
I have following issue while doing LIV -T-code MIRO . Passing Planned del. cost (Imports -Custom Duty) for Multiple POs (Same Vendor)
Checked following basics.
1.In Po Planned Del cost are maintained .(Custom Duty)
2.in MIRO -Selected Layout All information and Planned Del. cost
3.In Details tab Entered Doc. type RI (inv. receipt-IM) for imports.
4.Entered all mand. details like Amount ,currencey etc
1.Selected Layout All information and Planned Del. cost
2.Selected in Po reference Tab- Purchase order/Scheduling agreement and in more allocation area ,I am entering mulitple purchase order.(say 2 Pos)
When I adopt required 2 Po and line items to be settled r desplayed. and Again when I enter.Only One PO is displayed and other vansihes.
I need Both the PO (multiple PO).
Please help in resolving the issue.
Thanks in Advance.
Regards
Amar

Hi,
Yes, it is possible.
In MIRO, click on "More Allocation Criteria" button besides Purchase Order field
here go to search help of PO in the Pop-up screen and enter the vendor code and company code and execute
Now select the POs and click on "Copy" button and now click on "Adopt" button in the pop-up screen
It will copy all the POs and then follow the normal procedure of LIV.
Regards
Amar

Configuring Internal DELL RD1000 for Oracle Secure Backup

Hi all,
I have a Dell R710 server running Solaris 10 9/10 which has an internal Dell RD1000 drive. I intend to use this as a target for Oracle Secure Backup but am so far unable to configure the solaris sgen driver to see it as a valid tape/scsi drive.
iostat -En reveals the ff
c2t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: DELL Product: RD1000 Revision: 0053 Serial No:
Size: 160.04GB <160037691392 bytes>
Also after reboot
-bash-3.00# dmesg | grep -i RD1000
Feb 21 22:02:10 genunix: [ID 846691 kern.info] model DELL RD1000
however after following the installation guide i am still unable to see any /dev/scsi/changer or /dev/scsi/sequential directories.
Any help will be greatly appreciated.
Thanks

I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
Thanks
Rich

Problems with SB Live Dell Version for the Dimension 8200

I recently spent almost 6 hours looking in and out of forums looking for a driver because none of the ones supplied on dell were working
The one I found was a modded driver, which installed perfectly, my sound icon on the toolbar finally displayed volume, whereas before, it didn't detect my sound card at all.
But my problem now is that it is not outputting any sound to my speakers!
Any help is appreciated

I have the same problem with the SB li've 5. surround card. My computer installs the SB li've game port but not the multimedia - audiocontroller.
It's a oem card can anyone help me what to do because no I don't have any sound at all .
Greetings Chrizzzzz

Il download del wmp for firefox viene salvato ma non negli add-ons di firefox. non uso wmp per musica ecc.

Si tratta di un dispetto di W7 perché utilizzo un altro software per ascoltare musica e altro e anche se il download del plugin di wmp for firefox viene effettuato, il plugin non arriva negli add-ons

Your More system details list shows the new WMP plugin: np-mswmp , so that plugin should be working.
You can try the test pages:
*http://kb.mozillazine.org/Testing_plugins
* http://kb.mozillazine.org/Windows_Media_Player
*http://kb.mozillazine.org/Video_or_audio_does_not_play

Dell 1907FP for G5?

Similar Messages

Maybe you are looking for