Dell 2135cn Dell printer but not in color.

I have a Dell 2135cn color laser printer. The printer works but will not print in color. I am using Lion. Anyone know how to print in color?

You can at least get the printer to print in color if you use the pxlmono/pxlcolor drivers from OpenPirnitng.org. Just be sure to add the printer using the "Generic PCL 6/PCL XL Printer Foomatic/pxlcolor (recommended)" driver.
As I recall, when adding a printer using this driver, the default color space is Grayscale. You can go to Printer Features, select color mode, and save it as a Preset. Sorry to say you will have tro rely on Dell for any scanner drivers.

Similar Messages

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Bizarre

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Any answers?

Known issue now for almost 9 months.
Use Pages '09 if you have it.
Peter

Hp Officejet Pro 8500 will print but not anything with black ink. It keeps aligning itself.

My Hp Officejet Pro 8500 will print but not anything with black ink - i have checked the black ink cartridge and it is full. Whenever i print anything in colour (only option) the printer goes into an alignment/maintenace loop that lasts for a long time and does not fix the problem. What should I do?

Clean your printerhesd 4-5 times until the black fully restores. I am on my third complete cleaning and have gone from 0% black to approx. 60-70%. So, it works just takes time.

In Photoshop Elements 12 I can print but not scan..error message "Cannot find Wia compliant device". It can find the device or else it wouldn't print. How do I get it to scan??

I have tried everything to get the program to see my printer. By reinstalling divice drivers for printer to reinstalling program several times. Still I can print from my printer but not scan. Any help would be appreciated.

Hi,
Thanks for the update.
If you can scan with the HP software then at least we know the system can see the scanner.
Can you try the organizer to see if that works any differently. Once you load the organizer, go to the Edit menu and select Preferences -> Scanner - see if that sees it.
Since you are on Elements 12, you still have the twain option available to try. See the following document which describes moving the twain driver.
https://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
Brian

F-58 Error. vendor name printed but not Alternative payee

Dear group members
_Vendor name printed but not the name i entered in Individual set_
I followed Thread vendor name changed at the time of taking cheque printing
I made the below Transaction
1. I made the changes in vendor master under the head Payment transaction tab, in Alternative payer in document i selected check box of Individual entries
2. Posted in FB60 vendor invoice under payment tab check box Individual payee is selected, i entered alternative name so that check is printed in this name
3.In payment F-58 post & print i selected open item for payment after simulation i saved .The check is printed as per the
Name in Vendor master data but not the name i entered in Individ.setin fb60
I am not able to make to make payment, guide me
Your advice on this will be highly appreciated
Regards
shamulheq

Hi MUKTAKUMARI
I entered the bank details in the individual payee while entering FB60, the name coming in indiviid .set
In F-58 I made simulation Pk 50 QNB -Checks Payable & PK 25 vendor name, when i double click on the 2nd line item i found the name what mentioned in the Individ.set
I saved the transaction but the check was printed in the name of vendor master but not in the name i entered in indiviid set
Help me out to get the check printed in the individ set
Regards
shamulheq

I can print from my PC to my wireless printer but not from my ipad. What should I do?

I can print from my PC to my wireless printer but not from my ipad3. How do I cure this problem?

If it's not an Airprint enabled printer, you need apps like:
http://itunes.apple.com/sg/app/print-n-share-for-documents/id301656026?mt=8&ls=1
http://itunes.apple.com/sg/app/printcentral/id366020849?mt=8&ls=1

After updating to WIndows 10, I can print but not scan with my HP 2210 all in one

I updated to Windows 10, and since then I'm able to print but not scan with my HP 2210 All-in-one printer. I've tried downloading the software updates but nothing seems to work. Any suggestions

Hi , and I see you are both having trouble scanning after upgrading to Windows 10, and I may be able to help. Most products do have updated software available on HP's support website for Windows 10. I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too. HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive. Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type Paint.Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Type 4 printer driver shows color is available when printer is not a color printer

I am working on migrating to a new Windows Server 2012 print server. I am trying to use the new version 4 printer drivers whenever possible. I have noticed an interesting thing. Here is an example. When I added a new printer, an HP
LaserJet P3005 black and white printer using the HP LaserJet P3004/P3005 PCL6 Class Driver, under "features" it reports Color as "Yes." Now the printer is not color and I have noticed this on all of the other class 4 drivers for black
and white printers. Am I missing something or is this supposed to be this way? The printers do print fine, I just wanted to know why this is showing up like this.

Really a question for HP since it is their software.
BUT: A class driver can be used for a wide range of devices. If the core class driver HP added for the P3005 is also used by devices that support color then the driver itself DOES support color even when the device does not. There
are a couple ways HP could code around this. I do see that HP's PS version of the P3005 does not have a color option in Printing Defaults.
I have seen this type of issue from other vendors on previous operating systems, it's not just HP nor anything specific to class drivers although a class driver would expose this when the software to constrain the feature has not been added by the vendor.
Alan Morris Windows Printing Team

Colors in print preview not matching colors in soft proofing

Hi There,
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. Please see attached screenshot for the difference in the blue/cyan colors.
I would appreciate if anybody could point me in the right direction in what is causing this difference. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
Thank you.
Best regards,
D.

Here are some addtional details:
PS 13.1.2
Mac OS X 10.8.4
12 GB Ram
60 GB free disk space
I printed the same photo from two other computers (MacBook and iMac) with different PS versions (CS4 and CS5). The prints turned out identical to the first one which matches the print preview color rendition on my main computer (MacPro) running CS6. Strangely the colors in print preview of CS5 on the iMac renders the colors identical to the soft proofing colors.

Gradient boundary appears printed, but not on PDF?

Hey guys! Hope you can help me out with this.
I'm exporting a PDF from InDesign. The PDF looks fine, but when I print it it appears as if a gradient border has a stroke applied. In InDesign I've confirmed that the stroke is 0, but I'm still getting a light black line when printed. Also, it appears to only print from our high quality color printer -- when I print it from an old black/white one there is no line. Can anyone think of why this might be?
Thanks!
Ben

I can also confirm the problem here on my Adobe PostScript 3 printer using Acrobat 7, 8, and 9. The problem goes away if I turn on the "Print as Image" option in Acrobat's Advanced Print dialog. If your black and white printer is not a PostScript device, this is effectively doing the same thing. (Note that I'm not suggesting "Print as Image" as a good solution since it can change the color output, can take along time to print, and if you are sending the file to someone else for production, it might be difficult to guarantee that they will do the same.
The line occurs at the bottom edge of a raster image which was created by the Adobe Transparency Flattener to simulate your gradient in a (flattened) PDF 1.3. I'd suggest either trying PDF 1.4 or higher. If that's not acceptable for whatever reason, I'd suggest making sure that the gradient fill goes all the way to the bottom of the page AND making the gradient fade to something other than white (e.g., 0C, 0.5 M, 1.0Y, 0K). Hopefully, that will cause the raster image created by the flattener to extend all the way to the bottom of the page, and put the nasty line off the page...

Black ink not printing but not empty

My HP ENVY 5530 all in one printer is not printing black. I have checked the in level and it is 2/3rd's full. When I print a page, the color comes out but not the black. I have cleaned the printhead multiple times and when it prints the test page, all the colors come out but no black. The printer is plugged directly into a wall outlet. I am very frustrated since this is a relatively new printer with both original ink cartridges.

Hello, Since you have tried performing the Clean Printhead multiple times and the issue still exists, it seems to be an issue with the printing module/ printhead. You might try with a new Black Cartridge and check if the issue could be resolved.Else, its time to get the printer replaced / serviced. Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

Prints to not match colors on monitor.

How do I resolve this issue? I am told to convert to CMYK, but not sure how and if possible with PSE 11. I order prints from outside sources and all turn out the same. I have a green/gray tone throughout.

Suggest that you calibrate your monitor with a device made for this purpose.
Go to Edit>Color settings>check "Always Optimize for Computer Screens"
Go to File>print>More options (at bottom of dialog)>Color management tab>under color handling drop-down>"Printer manages colors."
Please let us know if this improves the color fidelity.
What happens when you print from another application?
You can't convert to CMYK in PSE.

Ipod appear in ''Device and Printer'' but not in ''MY COMPUTER'' & ''ITUNES''

MY I POD really headache.
First is device drivers install keep fail and when the day of success then I tunes never detect it.
i can see my Ipod at my DEVICE & PRINTER but when i go MY COMPUTER & I TUNES nothing appear.
I tried almost all way i can search online but to no results or maybe i do it wrongly also i will never realised it because all the ways to solve the problem are very complicating.
Add on to it, i left my ipod few month never use so when i plan to bring it out i realised the ios started to react slow.EXAMPLE: i slide on the screen, basically the shortest time it take to react almost like 5 second. so i planned to restore to factory setting but who know, my ipod seem not friendly with my notebook. And worst part is that warranty is expired.
HOW,WHAT,ANY WAY TO HELP..
MY IPOD is NANO 6th Gen
The IoS is the latest one
Rest of the detail im not really sure of it as i dont really touch that ipod also and its a present.
Will be thankful if any experts can guide me..

You might be able to redownload them on your computer's iTunes via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage, or by going into Edit > Preferences (iTunes > Preferences on a Mac) and on the Store tab ticking the 'show iTunes in the cloud purchases' tickbox, the music that you can redownload will then show in the My Music part of your library with a cloud icon against them for redownloading.
If your iPod isn't being recognised by your computer's iTunes :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support

HP Photosmart 7510 - I can print but not scan

Hello,
I bought my HP Photosmart a few months ago. It worked fine, and I could print wirelessly from my desktop to the printer, and I could scan from the printer to the desktop computer. In fact, last week I was able to scan.
Today, I wanted to scan something, and I could choose my computer in the list, but got the message that I needed to connect my computer to the printer. I checked what might be wrong, but everything looked okay. I downloaded the scan doctor, and received the message that DeviceSetup.exe could not be found. Which is odd, because when I look in the map, the file is there. I then rebooted the printer, which didn't work. Then I tried to reinstall the drivers on the hp website for my printer, but again got the message that DeviceSetup.exe could not be found.
Next, I removed the printer completely from the computer, reinstalled, and still had the same issue. Except this time in the list to scan to a computer, my desktop is no longer there and I get the message that "on windows, scan to computer will automatically be activated" (I'm translating from Dutch, so in English it could be slightly differently worded).
I retried the scan doctor, and this time I received the message that DeviceSetupLauncher.exe couldn't be found. Again, this is in the directory where it should be. I can see it in the map, but when I click on it, I again get the same notice!
Needless to say, I'm at a loss as to what I could do to fix it. The file I need is right there, but my computer acts like it's not. I'm a student and really need my printer. So I'd be very grateful for any advice on how to fix this problem!
Thanks in advance!

Hi,
For Windows 7 and Windows 8 machine, please keep the printer connected, download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
Can you see HP Scan when click Start (Windows 7) ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print Job Stopped on Xerox 7750 IP Printing but not AppleTalk

We have a bunch of Xerox 7750s setup via IPP. When we upgraded to 10.5.2 all print jobs sent to them appear in the cue as Stopped. When I re-setup some of the print cues via AppleTalk most of them work, but not all. I've tried the firewall suggestions mentioned here
http://discussions.apple.com/message.jspa?messageID=6765428#6765428
with no success. Sharing printers is out of the question. I'm not a fan of AppleTalk, but if it's the only way I guess I could give it a try.
Any suggestions on how to get my IPP to work?

Hello Henry,
all Airport Stations are recognised. I just connected the printer to the station in the living room, listen to music from ITunes right now, printer is recognised connected to this Airport Station, but the print job still stops.
It is frustrating, and a hassle to connect the printer via USB each time you need to print......BUT....nothing compared to the hassle I had with "other" operation system LOL!
Thank you for your reply

Dell 2135cn Dell printer but not in color.

Similar Messages

Maybe you are looking for