Dell 922 AIO with MacBook Pro OX mavr 10.9.5

Hello
I have over time read a few threads relating to problems connecting a Dell 922 AIO Printer with an Apple macbook mavericks OX 10.9.5
I have the same issue I can connect my MacBook to the other printers I have because I have been able to find the working apple drivers - but as many of you may or may not know Dell do not produce printer drivers which will work with all apple machines.
I have experimented with Lexmark series 3000-4000 and 5200 series, as some OP claim to have got the printer and laptop to work together, but I have not been so lucky.
I wonder at this point in time has anybody managed to get the Dell 922 working with any apple machine let alone my MacBook pro, and if so what driver did you use ? and where did you get it from.
I have been in touch will Dell but they can not help me
FInally I use the MacBook to connect wirelessly to the other printers via my network and just wish to do the same with this Dell 922 AIO Printer.
Thank you

Hi ..
It's involved >    How to revert OS X back from Mavericks: Apple Support Communities

Similar Messages

  • Can I use Dell AOI 922 printer with MacBook Pro?

    Can I use Dell AOI 922 printer with MacBook Pro?

    Cisco:
    Very helpful!   My set up was Mac/ Lion trying to Print off a Dell Photo A10 922
    Lion does not store any Lexmark, nor dow Apple, but I went to the lexmark site, and found this-
    http://support.lexmark.com/index?productCode=LEXMARK_X5270&page=product&locale=E N&userlocale=EN_US#1
    Downloaded that, then hooked up the printer, Cmd-P, and the Mac found the drivers I had loaded.
    Works fine.  Now when I go to my sisters, I can print!
    byw, I'm probably just a Level 2  "GIYF"er, but your the only one ( of MANY folks) who thought to search Lexmart. I've seen posts by MANY geeks saying a Mac could not print to ANY Dell printer.
    Nice job,
    Rich

  • What cable do I need to connect Dell 1707FPt Monitor with MacBook Pro

    Hi and thanks in advance for your answers.
    I have this monitor (Dell 1707FPt) :http://support.dell.com/support/edocs/monitors/1707FPT/EN/index.htm
    And I wish to use it with my MacBook Pro. The cable I have now (VGA I believe) does not fit anywhere on the MacBook.
    I'd like to know what cable I need to buy to connect the two.
    Thanks!

    Thank you for your answer a brody. I hope this information is what you need.
    Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro8,1
      Processor Name:
    Intel Core i5
      Processor Speed:
    2.4 GHz
      Number of Processors:
    1
      Total Number of Cores:
    2
      L2 Cache (per Core):
    256 KB
      L3 Cache:
    3 MB
      Memory:
    4 GB
      Boot ROM Version:
    MBP81.0047.B27
      SMC Version (system):
    1.68f98
      Serial Number (system):
    C02H6J2CDV1
      Hardware UUID:
    F2004EA4-ACFD-5C4B-B4C2-173F4BCE5F91

  • DELL 2407WFP 24" with Macbook Pro - Need Help!

    I just bought a new 2407WFP and am planning on using it with my Macbook Pro. When I connect it (using VGA to DVI conversion into the Macbook Pro), I select the maximum resolution setting for the Dell monitor, however, it just mirrors with resolution of my Macbook Pros's screen. The Dell 2407WFP's screen resolution comes out having the exact same workspace as my Macbook Pro, just bigger. This is not what I want at all. Any ideas on how I can fix this?
    Thanks in advance.

    The original reply is correct. I do this with my MBP and the 23" Cinema Display all the time. Put your computer to sleep/ close the lid. Make sure the power cable is plugged in, as well as your keyboard and mouse, and the display you want to use. If you have Bluetooth devices it will still work. Simply tap a key on the keyboard and the computer will wake up, sense that the lid is closed, and make the external display your sole & primary display. I use bluetooth devices myself and they work fine. I've even formatted my computer before while attached to the external display and it will sense the display/keyboard/mouse on first startup and work with them. It's wonderfully simple.
    If there are USB ports on your Dell monitor then there should also be a USB connector for your computer on the cable. Essentially it's a USB hub, and should work fine provided the USB cable from the screen is attached to your computer. VGA & DVI do not provide USB signals.

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • Does a Dell monitor that is compatible with PC work with MacBook Pro?

    Looking for a reasonably priced (under $200) external monitor to use with MacBook Pro. Any suggestions?

    Hello bkford
    I use an HP monitor with mine, Just by an adapter, I bought a VGA to mini display, and it worked fine!
    Good luck
    Dustin

  • Need help connecting Dell U2713HM monitor to MacBook Pro

    What is the best way to connect a Dell U2713HM monitor to MacBook Pro OS 10.7.5 to maximize the resolution 2560 x 1440? I was using a VGA adapter on my old Viewsonic monitor that hooked into the Thunderbolt port, I think. When I use my old adapter with the new Dell monitor, it stops my Mac from responding and the monitor says it has no DVI connection. When I unplug the adapter from my Mac, it starts working again.  I'm not very good with all these port options and descriptions so talk real slow, please.

    1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP
    1 DisplayPort 1.2 (DP)
    1 High Definition Multimedia Interface (HDMI)
    1 Video Graphics Array (VGA)
    1 USB 3.0 upstream port
    4 USB 3.0 downstream ports
    Thank you!

  • Compatibility of Past-Years Cinema Display with Macbook Pro Late 2011, and other displays.

    Hello.
    I'm inquiring about the compatibility of Apple cinema displays from years past with Macbook Pro 15" Late 2011.
    For instance, will all Apple Cinema Displays from, say, 2008 onwards work with my mbook?
    They can be had fairly cheaply on the used market.
    What is the earliest model that will be compatible?
    I've never had an external monitor for my lappies, so I am very clueless. I know DVI is a common connection, but there is no DVI port on my lappie.
    I would also be very curious as to what would be suitable displays from other manufacturers, particularly Samsung and Dell.
    The size doesn't have to be big, 20-23 inch is fine, I am more worried about good resolution [no obvious pixellation]
    If a screen is big, but has good resolution that's even better of course, but I'm not ****-bent on a big thing.
    The mbook 15" screen is just a bit squashy for home use really.
    Thank you very much in advance for any advice.
    Feel free to link me to other threads as an answer, I have done a bit of searching around, but still confused.

    I have the same MBP and recently bought a 23" cinema display on Craigslist for $140.  It works great.  I had a display port to DVI adapter and it worked fine.  Built a stand to hold the laptop vertically so it's out of the way.  Don't know about older displays but anything with DVI should work fine.
    The screen size and resolution are great for photo editing.  I now have the best of both worlds, a display that rivals my wife's iMac and portability.

  • Qual è il modo più facile e veloce per trasferire tutti i dati dal mio vecchio MacBook Pro (del 2008) al nuovo MacBook Pro 13' con display retina (che non ha lo slot per il cavo ethernet)? Grazie

    Qualcuno sa dirmi qual è il modo più facile e veloce per trasferire tutti i dati dal mio vecchio MacBook Pro (del 2008) al nuovo MacBook Pro 13' con display retina (che non ha lo slot per il cavo ethernet)? Grazie

    The fastest way would be Target Disk Mode:
    http://support.apple.com/kb/PH10725
    You would need a Firewire cable and an adapter for the retina Macbook.
    http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
    Not fast, but perhaps more practical is to use an external hard drive with USB as an intermediary.
    Ciao.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for