Dell 944 All-In-One Printer - Corrupt Driver R153723.exe?

Have been trying to get an Dell AIO 944 printer to work with Win7Pro x64. When I run (unzip) the Vista-64bit driver (R153723.exe) there is no setup.exe file whatsoever created in the R153723 directory and nothing happens. The folder is empty except for a 'Fax" subdirectory.
For a comparison I tried a Vista-64bit driver for an AIO 924 printer (R148157.exe) and it does create such a setup files and the printer installation starts right up. It fails when asked to plug in the printer which it correctly doesn't recognize as an 924 printer. When displaying the contents of the R148157 directory you can clearly find a Setup.exe, Setup.ini and dlcccd1.id files.
Has anyone else encountered this issue with the R153723.exe driver?
Tim

Sorry for the delay Rick. Tried it out last Wednesday then went out of town until Monday.
Bottom line it did not work. The installation program starts up fine and finishes three of the four steps (Preparing System for install; Transferring software; Installing software) then crashes on the fourth (and final) step; Detecting your printer. A message box immediately pops up with the following "Hardware installer has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Eventually another message box pops up with: "Windows Script Error "
Script: C:\drivers\printer\944\dlcdEN.vbs
Line: 11
Error: Permission denied
Code: 800A0046
Source: Microsoft VBScript runtime error
As for the "Permission Denied" error, running this with or without administrator privileges makes no difference. I have also tried running the installation using all other previous versions of Windows under Compatibility Options. It fails every time at the "Detecting your printer' step. I have screen shots of the above if that helps. Very frustrating.
Today I researched VB 'permission denied' errors (apparently this is an error 70) and found nothing that jumps out at me as an obvious solution. There was a reference to elevating client privileges in a server setting using DCOM (support.microsoft.com/.../180384). The computer (Dell Optiplex) is not networked but might this service need to be running since it's an older installation program? Was also thinking this might be a .Net Framework or VB runtime issue i.e. with the wrong version.
So any suggestions or another version of the installation program to try?
Thanks, Tim

Similar Messages

Dell Personal All-In-One Printer A960 compatibility?

So, I'm giving my mother my Powerbook G4, but she needs it to work with her Dell A960 printer. Is there a way to get it to work?
Thanks a bunch,
Nick

Ralph, you probably can't since the system requirements are for Windows operating system.

HP Officejet 6500A Plus e-All-in-One Printer - E710n, Driver cannot download

The driver stops downloading part way. Tried many browsers

joshuawkj,
I am sorry you are having an issue with downloading the drivers. I would check with your Internet provider since this seems to only be happening on your PC. Your Internet could be dropping the connection, if even for a millisecond or a few seconds. Any drop in connection can cause downloads to fail.
I hope this helps
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
Errors:
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB. I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update?? HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps?? Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

Driver question - my all in one printer will print but not scan

Hi
I have an HP c4280 (you know, the all in one printer you could get for free with the mail in rebate in 2007). I just plug it in and my mac recognizes it as a printer, and it prints fine, but image capture does not recognize it as a scanner. Before I upgraded to leopard I had all of HP's stupid software installed but after upgrading to leopard it didn't work (surprise). A lot of other things didn't work either so I did an erase and install and now everything works beautifully (I feel like I have old Tiger back, but better). However, I do not want to install HP's stupid overbloated and highly unnecessary mountain of software on my nice new clean system (I have turned into kind of an apple-only purist I guess ^_^). I checked HP's website and all they have is the same ginormous software bundle for download, and the installation wizard does not allow the option to install only components of the software (its all 28 programs or nothing). So, my question is, does anybody know where I can find only the driver I need (or WHAT driver I need) to make this printer compatible with image capture so I can scan?

You need to download the full featured driver from the HP site, and it also seems HP has an update for the Leopard installation as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en
I too have a C4280 and wasn't able to use my scanner until I had fully installed the HP software.

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP All-in-One Printer: any way to install the TWAIN driver only?

I have an HP PSC 2355 all-in-one Printer/Scanner/Copier.
The Mac OSX software/drivers are a whopping 100MB in size. I really only want to print (which is no problem without installing all of their software) and scan (which I can't seem to do without installing the software.
I can't find a TWAIN driver (which I assume is what I need to scan) by itself. And the installation software doesn't give you a TWAIN-only choice
I've installed the HP software bundle on my old PowerBook (just got a MacBook), I really don't want to litter my new computer with all their useless "features"...
While this is probably a question for HP, thought I'd post it here.

You can try a program like VueScan.
http://www.versiontracker.com/dyn/moreinfo/macosx/7610

HP F380 All in one printer 64 bit driver fails to install

I have a HP F380 All in one printer. I donwloaded the driver for Windows 7 (64 bit). The installation program abbruptly dies with an error
Please advise how I should proceed now.

Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printer: Driver Update Problem with HP 6700 All In One Printer

My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

Hi,
I request you to try the following:
For network connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
For USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray

I recently purchased a Mac mini with the Yosemite operating system, but I cannot find a driver that works for a canon MP 450 all in one printer.

I need a driver for a Canon MP 450 all in one printer to be used with a Mac mini with the Yosemite operating system.
Canon does not have a driver. Third party providers drivers do not work with "Yosemite."
Any suggestions?

Canon does seem to have a driver.... http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp450#DriversAndSoftware

Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8?

Hi JCWG. To answer your question, Yes the driver is the same. Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers. http://goo.gl/njt723;
If you have any other questions, please feel free to write back
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
please help
saleem

Hello Saleem,
Welcome to the Forums
I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
HP Officejet 4610 All-in-One Printer Drivers
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Help with a driver to enable HP Office jet 5610 all in one printer to work with ubuntu

trying to scan and up load to my computer, but my HP office jet 5610 all in one printer does not work with Ubuntu.. Need new driver or something.

This is a Firefox help forum, so getting your printer working on ubuntu is beyond the scope of this forum. I would recommend something like [http://www.ubuntuforums.org/ www.ubuntuforums.org/] for help

Why do I have to continually redown load the driver for my c6180 all in one printer every few months

why do I have to continually redown load the driver for my c6180 all in one printer every few months

Please read this post then provide some details. What operating system? Are there any error messages on the printer or computer screen when printing fails?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Dell 944 All-In-One Printer - Corrupt Driver R153723.exe?

Similar Messages

Maybe you are looking for