Dell C1765 printer will not make multiple copies in Yosemite

I have installed Yosemite on my mac mini. My Dell C1765 color laser printer will not make multiple copies in Yosemite. It will do so in Windows. Any suggestions?

PS: I forgot to add that my computer is using Windows 7

Similar Messages

Printer will not make 4x6 size photos

I just bought an HP Photosmart 8250 printer and I cannot print the 4x6 size photos. The printer instead pulls paper from the letter size tray. I believe it is a problem with the computer because I was able to print a 4x6 photo with just the memory card in the printer and all hook-ups to the computer detached. As far as I know, I have selected the right size paper wherever given the choice. In Mac System Preferences however, I cannot change the "Default Paper Size in Page Setup" to a 4x6 size. Is this the root of my problem? If not, what is?

Hi,
I think I might know how to fix the probem you are having. I too, just purchased an HP 8250 printer. I found that I had to go into the Advanced menu on the Print dialog box. Pick "Paper Type/Quality" and choose the Photo tray. The default is the "Main Tray" which typically holds your 8 1/2 by 11 paper.
That should have the printer pull from the proper paper tray (4x6 photo tray).
I am using the 4x6 Borderless photo paper that has a removable tab. (didn't now that until I bought it.) However, I'm still having problems getting the printer to print a true borderless print. The only way it will without giving me a white border on the left and right "landscape" or 4" edges is if I pick "Zoom and Crop" which then will do that to the picture.
If you are having that problem or if you know how to fix it, would you let me know. the one thing I am finding with this HP printer and my Mac, is that there are way too many steps when wanting to print a photo from your computer. It's a bit frustrating. I have yet to try printing from a memory card as I have always just printed directly from iPhoto. (previously used an Epson 1280)
good luck!
Pam

Printer will not make the final connection to the network

HP Photosmart c4580 all in one printer
link systems router
using the HP add a device wizard, everything proceeds til the final install on the network. a big red X shows up with a message that it can't find the printer on the network this happens with and without the USB connection. all firewalls are turned off.. i have entered the network SSID into the printer configuration settings.
thanks

this utility may help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&lc=en&product=3418707&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Hp office jet wireless 6500 will not make a copy has been working fine until today.

operating system imac has nothing to do with this I am just trying to make a copy.
Just changed the ink today when the problem started. It still will not make a copy I just get a blank page.
No changes of any kind.
no error message.
Thank you.
This question was solved.
View Solution.

I searched other posts and someone suggested that I go to setup on the front of the printer and then tools. I did a cleaning twice and now it makes copies again. The first time I did the cleaning it still did not work, the second cleaning did it. I would strongly suggest to HP that they address this issue in their troubleshooting docs. They don't even mention not making a copy, they only talk about printing, two diiferent issues.

Printer will not recognize commands from computer

My computer will print to other printers, but my HP printer will not recognize commands from my desktop. My computer will allow me to choose the HP to print to and the print job will show up in the printer icon on my task bar, but my printer doesn't recognize that it's been asked to print. The printer will print when other computers ask it to. No error message comes up and the yellow light doesn't flash-- the screen just reads "Ready." The ink cartridge is less than a week old and it has plenty of paper.

Hi @blackburnenglis,
Welcome to the HP Forums!
I see that your printer will not recognize commands from your computer. I am sorry to hear this, but happy to help!
For further assistance, I will need to know:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out?

Question
HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out? edit

Thank you for posting your list of installed Extensions. One of them might be intercepting the menu command. Since you have the Add-on Compatibility Reporter, it's possible that an older add-on that doesn't actually work well with Firefox 5 could be to blame. Could you try disabling the "HP Smart Web Printing" extension and see whether that makes any difference?
Also, you can simulate a print button on a web site by pasting this to the location bar and pressing Enter. You also can save it as a bookmark for easier access (when scripts are saved as bookmarks, we call them bookmarklets). Hopefully you won't need it for long.
<br>javascript:void(window.print());

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility and Repair permissions for a temporary fix. How can I get a permanent fix?

After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
bettyfroomneedham

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

Adobe Print will not create files in Network Locations

Hi,
We've just installed 5 new Win7 64bit machines on our network which were shipped with Acrobat Standard X. The server is Windows 2003 SBS.
2 out of the 5 machines can only use Adobe PDF Printer to create pdf's to the local drives rather than the shared network drivers. These users (including myself as Administrator) have full access and control over the network drives and have no other connection issues. The printer settings are identical on all the new PC's and the port is Documents\*.pdf
The error message is simply "error-printing" in the What's Printing dialogue box, no other pop ups or notifications.
There are no further details in the Event Viewer.
Win7 suggests making the Adobe PDF the default printer, which does not resolve the issue.
I have tried CutePDF as an alternative, which does fullfill this function, but I do not want individual users on different software, and certainly do not want to set a precedent myself!
I've tried searching on this formum, but pdf "printing" and "creation" seem to be interchangeable phrases for various problems!
Thanks in advance for any help,
Andy.

As a web designer - IMHO, Internet Exploder is absolute garbage disguised as software. This (and thousands of other threads in this and many other forums throughout the web) is just more proof of that. I've used Firefox since 2002 when it was still called Mozilla. It does about a million things IE can't and won't, and does them better, faster, and more sensibly.
Microsoft KNOWS that most corporate workstations have Windows and most I/T departments forbid installation of unapporved software, including browsers, so (by a very slim margin) IE is still the most used browser in the world, but... that doesn't by any means make it the best choice. Because they know so many people are literally FORCED to use it at work, they will not make it more functional than they absolutely have to, because they don't care if people like it or not, when they have no other choice.
On a home computer, it's different, and that's why Firefox is just a fraction of a percentage point behind IE in worldwide use, and thanks to iPhones, Safari is rapidly climbing the numbers too.
Rather than trying to work around something that even Microsoft won't bother to fix, abandon their junk and go with Firefox, Opera, Chrome or Safari. It won't be long till you're glad you did.

**HELP** My C309a printer will not print!!

I have a C309a HP Photosmart Premium printer. I operate it thru a wireless att dsl modem. Suddendly, after some HP update, it no longer responds to the Print. I have run several self diagnostics online. Thus, I first made sure the wireless connection is operative (YESI disconnected and reconnected just to make sure) then 1: uninstalled the Printer driver. 2: Installed the CD printer dirver. 3:Unistalled the CD printer driver. 4:Installed and unistalled the HP website drived for windows 7 64 bit (three times). I have called HP tech support and was helped by a friendly guy who had me repeat step 4 two more times . We have concluded A: the the printer is indeed connected to my wireless network. B: the copy feature works on the printer. C:the Scan feature works and successfully uploads the scan onto my computer. However, the the printer will not Print!! When I hit the print button on a document, web page, or anywhere on the computer the printer does nothing!! The test page on the HP site does nothing as well. Not a whisper. Anoher odd thing is that I cannot augment my printer properties (the window that allows you to select draft, black and white printing only, or paper size). When I hit this button I am receiving some OXE..... error window. The HP tech stated that i had to have ink in all of the cartiriges for it to respond to print and attempted to sell me some over the phone. My color and photo black ink have been dry for over 8 months. CAN ANYONE HELP ME???!!!!

Well, I think the simple answer is that, yes, you have to have ink in all of the cartridges for the printer to print.
You can also download and run this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&cc=us&dlc=en&lc=en
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Recently installed Snow Leopard software and now my printer will not respond. Any suggestions?

I recently installed Snow Leopard. Now my printer will not respond. How do I troubleshoot that?

Start by telling readers the make&model of your printer, and what cabling you are using to connect it.
If you were connecting via AppleTalk, it is no longer supported, and you will need a different connection method. Readers can help you with that.
Some printers will need updated Drivers for Snow Leopard. Some printers need to be deleted and re-added.

My printer will not print the docs in the que.

My printer will not print the docs in the que. I think it may be the norton virus protection I Installed recently. How do I fix this?

If one thing gets held up in que then all other doc's follwing will be held up as well-
Download and run the "PRINT DIAGNOSTIC UTILITY" to get rid of the things in your print que
Download it here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4083...
Save it to your Desktop and then run it> Click "Fix" when it comes to your QUE
Although I work for HP, I am speaking for myself and not for HP.
Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )

MY PRINTER WILL NOT STOP PRINTING

I have a brand new HP 309a wireless printer. I am using it with a USB PORT. I downloaded something from a PDF file and the printer will not stop printing. I rebooted the computer, I disconnected the printer for an hour and when I turned it on it resumed I hit the cancel button, the display reads "print cancelled" and then it reads "now printing." When I attempt to use the printer to print something else it reads "busy." HELP.
This question was solved.
View Solution.

Hi,
Disconnect the USB cable and follow the below steps to restart the spooler service.
Click Start (Windows logo) >> All Programs >> Accessories >>
Right click on Command Prompt and open it as Administrator ( choose run as administrator)
Enter the below command in black window and hit enter key..
net stop spooler
That will stop the spooler service.
Then enter the below command and hit enter key to start the spooler service
net start spooler
That will delete the current print comment and the things in print queue.
Press the widnows key and R key on the key board to open run window ( Click on Start >> Run).
In run window enter services.msc and click Ok.
That will open services window.
From there double click on the print spooler service.That will open a new window.
Click on Stop button to stop and then click on start button to restart the spooler service.
Make sure that startup type is : Automatic and Service status is : Started
Click on Apply and Ok to close the services window.
If the issue resolved,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Saul
Tech Support Eng.
HP

Dell C1765 printer will not make multiple copies in Yosemite

Similar Messages

Maybe you are looking for