Dell cpx650 and ati
Installed Arch base, installed xorg ,hwd, ati drivers and flux. when i run startx i get error (EE) no devices detected
fatal server error:
no screens found
XIO:....
Really don't want to have to try and post xorg, to long. Anyone have any idea right off hand. going out of town in the morning and would like to get the problem solved tonight. thanks!!!!
Just got back in town. yes I did run aticonfig. Thanks
Similar Messages
-
Java plug-in does not work on DELL laptop w/ ATI video card
Hello there,
I try to run Java Web Start on my new DELL laptop with ATI mobility radeon 7500 video card. When I run the SwingSet2 App, the whole system locks up, so I have to do a hard re-boot on my laptop. I found that this problem happens to other DELL laptops when I address this issue to my co-workers. Nevertheless, this problem is fixed when I run Java Web Start on some other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any workaround for this problem?
Please help. Thanks.
A.A.Hello there,
I try to run Java Web Start on my new DELL laptop with
ATI mobility radeon 7500 video card. When I run the
SwingSet2 App, the whole system locks up, so I have to
do a hard re-boot on my laptop. I found that this
problem happens to other DELL laptops when I address
this issue to my co-workers. Nevertheless, this
problem is fixed when I run Java Web Start on some
other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any
workaround for this problem?
Please help. Thanks.
A.A.Do you use sun one studio? Do you experience system hangs and blue screens?
I do, and I was kind of hoping I'm not alone.
Morten -
I have an old dell desktop and an older ipod with my itunes library....the dell desktop is not functioning as well and have not been able to sync a newer ipod to the library .....i now have a newer Macbook air....i would like to put my library on my Air i tunes....when i attached the ipod to the air to try to sync the ipod library onto the air itunes i received a message that said i was synced with another library and that if i wanted to sync with this library i would need to "erase and sync" ....got spooked as i dont want to lose the library/ or the music....question ----will this procedure put my existing library (which is all on my older ipod) onto my Macbook air itunes?...any help would be greatly appreciated...thank you in advance...
No, it will sync the ipod to the content of the MBA which presumably has nothing on it (= erasing content of iPod and replacing it with nothing).
Ideally:
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.
Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html
if you absolutely must use the iPod:
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store -
i had upgrade my windows to 8.1, the problem is that i cant install Dell backup & recovery, when i installing and updating PE I get FACTORY SETUP ERROR 5
is there any technical help me please...thx
however...its cant recovery or reset my laptop back to factory image...
just like this photo...
recovery cant... refresh also cant...Same problem here: windows 8.1, dell backup and recovery 1.6.2.4. During the installation, when the box of "updating PE environment" appears, i get "factory error 5"
Is there any solution?
Regards -
my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
my laptop is a 2008 modelHmmm... 2008 MBP has...
Video (Monitor): 1 (DVI)
Details: Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html -
Hello,
I have a question about HP Pavilion dv7-4083cl (w/ Intel Core i5 and ATI GPU):
Which is its normal temperature?
Environment: 24 °C (Celcius)
HWMonitor and Real Temp agrees with the numbers find below.
The two CPU Cores starts at 37 °C and in about an hour are at 53 °C, with CPU usage under 10%.
The GPU starts at 34 °C and easly goes to 57 °C, with some peaks at 72 °C
Regarding "Hewlett-Packard 144B": (under low/idle CPU usage)
TZ01: starts at 40 °C and very fast goes to 55 °C or 65 °C (and more, under CPU load)
PCH starts at 59 °C and very fast goes to 76 °C (and stays there)
GMCH: starts at 40 °C and very fast goes to 55 °C or 65 °C
ATI Mobility Radeon HD 5470 (TMPIN0): Starts at 34 °C and easily goes and stays at 57-58 °C
Note: I'm also using a cooler (two fans, under its base)
If I run Real Temp (v. 3.6) "Sensor Test", the cores goes up to 100 °C , and even a bit more.
Which is the normal / expected behavior / operational range?
Steady PCH at 76 °C is it normal?
TZ01, GMCH at 55 - 65 °C is it normal?
i5 Cores at 55 °C is it normal? (and easily going to 70 °C or more)
GPU (ATI) at 57 °C is it normal?
is it normal to climb up to 100-105 °C under a 5 minutes high CPU usage operation?
Thanks!i roll back to bios F.25 which is the older version of bios that support my device but still suffering from same D90 system overheating error.
i can't contact hp support or send it to offical hp center currently coz i am from Egypt and i live in far town -
Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)
The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR. -
Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot
See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails. -
I need to switch my iPod touch, 4S generation, to another computer. I use Dell, I origanally had it synched on a Dell laptop, but am not allowed to do so on that anymore. I am on a Dell PC, and want to change it over to this computer. How do I do that?
Plug it in and sync it.
It will erase the ipod content and replace with the content from the new computer so make sure that you have copied everything form the old computer, or your backup copy of the old computer, to your new one first. -
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Please read the information at...
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Locate the execute file (WebcamDell2.exe) buried in...
C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
battery back in and start the computer. Did the webcam come back?
If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
Please use Internet Explorer(32-bit) when navigating to My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
If system does NOT register after 5 minutes, then contact Dell Tech Support.
If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for software update
Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
RickHello Rick,
Thanks for trying to help.
Here is the info as requested:-
Host Name: DELLLAPTOP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Trevor
Registered Organization: Microsoft
Product ID: ?????
Original Install Date: 07/07/2010, 11:46:05
System Boot Time: 24/10/2011, 12:06:27
System Manufacturer: Dell Inc.
System Model: Inspiron 1570
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
BIOS Version: Dell Inc. A05, 23/03/2011
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,937 MB
Available Physical Memory: 1,399 MB
Virtual Memory: Max Size: 5,872 MB
Virtual Memory: Available: 4,244 MB
Virtual Memory: In Use: 1,628 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server: \\DELLLAPTOP
Hotfix(s): 71 Hotfix(s) Installed.
[01]: 982861
[02]: KB971033
[03]: KB2305420
[04]: KB2393802
[05]: KB2425227
[06]: KB2475792
[07]: KB2476490
[08]: KB2478662
[09]: KB2479628
[10]: KB2479943
[11]: KB2484033
[12]: KB2485376
[13]: KB2487426
[14]: KB2488113
[15]: KB2491683
[16]: KB2492386
[17]: KB2503658
[18]: KB2503665
[19]: KB2505438
[20]: KB2506014
[21]: KB2506212
[22]: KB2506223
[23]: KB2506928
[24]: KB2507618
[25]: KB2507938
[26]: KB2508272
[27]: KB2508429
[28]: KB2509553
[29]: KB2511250
[30]: KB2511455
[31]: KB2515325
[32]: KB2518869
[33]: KB2522422
[34]: KB2524375
[35]: KB2525694
[36]: KB2529073
[37]: KB2530548
[38]: KB2532531
[39]: KB2533552
[40]: KB2533623
[41]: KB2534366
[42]: KB2536275
[43]: KB2536276
[44]: KB2539635
[45]: KB2541014
[46]: KB2544893
[47]: KB2545698
[48]: KB2547666
[49]: KB2552343
[50]: KB2555917
[51]: KB2556532
[52]: KB2559049
[53]: KB2560656
[54]: KB2562937
[55]: KB2563227
[56]: KB2563894
[57]: KB2564958
[58]: KB2567053
[59]: KB2567680
[60]: KB2570791
[61]: KB2570947
[62]: KB2572077
[63]: KB2579686
[64]: KB2586448
[65]: KB2607712
[66]: KB2616676
[67]: KB958488
[68]: KB976002
[69]: KB976902
[70]: KB976932
[71]: KB982018
Network Card(s): 4 NIC(s) Installed.
[01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection
Status: Media disconnected
[02]: Intel(R) WiFi Link 5100 AGN
Connection Name: Wireless Network Connection
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
IP address(es)
[01]: ????
[02]: ????
[03]: Microsoft Virtual WiFi Miniport Adapter
Connection Name: Wireless Network Connection 2
Status: Media disconnected
[04]: Cisco Systems VPN Adapter for 64-bit Windows
Connection Name: Local Area Connection 2
Status: Hardware not present
Hope that this will help.
Thanks again
Regards
Trevor -
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
-
Photoshop CS3 and ATI Radeon 2600XT Graphics ERRORS
I am Running photoshop CS3 on a mac pro 2.8GHz 8-core with and ATI Radeon 2600XT graphics card. On any size file, from a small jpeg to an enormous tif, any time I pan around the image, the monitor will repeat a section of the image over and over to fill the screen. That is to say, panning vertically will fill the screen with copies of a random horizontal section of the image (20pixels wide or so). The effect goes away as soon as I perform another action that affects the entire image (zoom, action undo, create new layer, etc.). I have updated photoshop and osx with all available software and firmware updates.
An example of what this looks like: http://www.flickr.com/photos/26107441@N02/2450960322/I am running the same Mac hardware with a Mitsubishi 2060u, 1600x1200, 85Hz (CRT). I am having no such issues with PS CS3. I tried the monitor at 60Hz as well which also worked fine.
Do you have all the latest updates installed including the 2600 firmware update?
-Keith -
Mac pro (late 2013), Dell UP2414Q and windows8.1 bootcamp
I bought mac pro (late 2013) and Dell UP2414Q.
Monitor is set on DP1.2 and works normally in OS X. I get 4K@60Hz, I can switch to lower resolutions like 1920x1080 and it works.
Then I Installed windwos 8.1 which I need for some testing and I have aproblem here:
When DP 1.2 is enabled, and I switch to 1920x1080 resolution, I get 2 pictures on screen squeezed together - totally useless and I can't work on that.
If I disable DP 1.2 and revert on monitor to DP 1.1 it works normally. But I switch to 4K with only DP1.1 enabled I can get only 30Hz out.
As it seems under OS X I can use any resolution with DP 1.2 enabled, but not in windows 8.1 via bootcamp.
I would really really love to get this working, I tried next things, but nothing worked:
-update bootcamp support
-update AMD gpu drivers from their web page
I already wrote on Dell forum and I got redirected here on apple forums.which model rMBP 13" or rMBP 15"
the 13 will support it with the latest intel drivers.
the 15 will support it with the latest nvidia drivers.
i have both models and both are working correctly. -
Liquify and ATI Drivers on an iMac.
Hello,
This is driving me insane, so i would appreciate any help at all.
There is a SERIOUS problem with PS CS6 and ATI HD 5750.
Liquify tool does not work...
Here are the details:
iMac i7
16 GB RAM
Graphics ATI Radeon HD 5750 1024 MB
Software Mac OS X Lion 10.7.4 (11E53)
What happens is that the moment i enter Liquify's UI the mouse stops moving!!!!
I only have mouse movement to the left and to the right (to choose or tweak brush sizes etc.)
but when the mouse is over the image, the crosshairs are frozen, no movement at all!!!
If i try to liquify something on the image it does not work.
The only way to make Liquify work, is to disable "Use Graphics Processor" in PS preferences.
So, this is clearly a driver issue, the thing is that ATI driver updates (for HD5750 ON iMacs) come directly from Apple and there is no available download on Amd's site, so i actually can't upgrade drivers myself....
I should also mention the following:
I have both Production Premium 5.5 and 6 installed on the same machine
I had PS CS6 beta installed, but i removed it (using the uninstaller - The Adobe way) prior to the Production premium CS6 installation.
The Liquify tool had the exact same problem in PS CS6 Beta (I was running 10.7.3 at that time), but i didn't mention anything, i thought it was just a bug with the Beta version.
It's also worth mentioning that the Liquify tool in PS CS 5.5 works just fine. (probably because it doesn't use GPU accel.)
Othen than that, i am really dissapointed and frustrated with the whole CS6 experience so far...
I couldn't even install PP CS6 at first, and i was forced to reboot the iMac in safe mode to complete the installation.
I would really appreciate any help, i'm stuck.
Thank you.Noel Carboni wrote:
On the one hand, Apple users benefit from Apple taking on the responsibility of integrating everything together so there's minimum fuss. On the other hand, sometimes you have to wait for solutions that work, where a PC user has more options... I had trouble with Liquify using the latest ATI drivers (on my PC), so I just uninstalled them and installed a version they released 2 months ago that works…
Noel,
One can do similar stuff on the Mac too, provided you really, really know what you're doing. What's more, not only can you use .kext files from previous OS versions, but you can even hack them or roll your own. One notable case was the set of applefan.kext files provided by an outfit called macgeniuses to cool down the Power Mac MDD G4 for purposes of running a mutant, flashed graphics card they sold for it. One has to be superextra careful though, or you'll turn the machine into an extremely noisy air filter or you can literally fry the cpu and gpu in no time. -
How to Setup LCD Monitor and ATI Rage LT Pro ? Thanks
I have already added the 109401-01 Patch to Solaris 8 (x86) , but I got
a problem , that LCD Monitor and ATI Rage LT Pro was wrong in kdmconfig,
Someone can help me how to config them? thanksThanks for your response.I cannot sure which drivers should be selected , I have tried the all item of ATI,LCD monitor size and resolution in kdmconfig , but it doesn't work well ,even more , I didn't see any item which shows ATI LT Pro. The system is ok, color-mapping is right ,I can see the right color (256 colors) ,but something wrong with the right block of Login Screen that was redundant on the center of normal screen. 1152x900 resolution ,which is the default resolution in Solaris.My LCD limitation is 1024x768,I don't know that might be a problem or not,could it be a problem?
Thanks.if you can send me a mail ,I can send the picture to you.
[email protected] , thanks again.
Maybe you are looking for
-
How do I use my ipad 2 when traveling in Scotland?
I have the ipad2 with 3G. Any recommendations about getting a Sim card in Scotland?
-
AP register report with PO and related invoices
Hi SAP gurus, Business wants a AP register report, listing all processed invoices related to a PO. Basically they want to see the PO no. and invoices on the same report. I have tried to find a std report but couldnt. Please suggest if there is any su
-
I installed the Firefox 9 beta and it messed up my Internet settings so no browsers could connect to the Internet. However, my antivirus program can connect to do updates, and I could still use my FTP functions as well. I am using Windows XP SP3 32 b
-
Oracle error ORA-00600 when using Oracle 10g and Sun One Web Server 6.1
I have a java application that was running under Solaris 8 and Oracle 9i. I am trying to get it up and running on a new server that is configured with Solaris 9 and Oracle 10g. Whenever the application tries to connect to the database it receives the
-
Enhance 0CRM_MKTATTR_ATTR extractor
Hello all, I would like to enhance 0CRM_MKTATTR_ATTR standard CRM extractor to be able to view in reporting the field "attribute set" Could anybody give some ideas about how to do it? Thanks in advance. Carmen