Dell disks with Sun's storage array
Hi,
Does anyone know if its possible to use Dell's disk drives with Sun's StorEdge family of disk arrays. Specifically, the drive is a 300 GB 10K U320 SCSI disk
http://www1.ca.dell.com/content/topics/reftopic.aspx/gen/ccare/en/ccare_confirm?c=ca&cs=CADHS1&l=en&s=gen&~section=default
and the disk array is Sun Storage Tek 3320 SCSI
http://www.sun.com/storagetek/disk_systems/workgroup/3320/
Any help or pointers will be appreciated.
thanks
Nilesh
Oh my, I should retire...
When I read that page I somehow confused all that X* stuff... :o/
I was wondering if it is possible to connect other
storage solutions than the Xserve RAID (like the Sun
StorageTek ones) directly (or via switch) to an
Xserve (the pizza box server )
Of course you can connect any DAS storage device that presents itself as a raw device on the device channel in use (fc, scsi, ...).
But reading the specs on that special Sun Raid I'd say that it falls into another category: SAN storage. And therefore it needs OS support/drivers which seem to be available only for Solaris, Linux and Win.
How exactly do I partition, format and mount the
virtual device under Mac OS X Server?
DiscUtility.app? In CLI: diskutil
I want to try this procedure:
Connect the Sun Diskarray to the Xserve via the
copper cables.
(Perhaps reboot the Xserve)
Partition with pdisk
mkfs.xfs (or something similar mac os like)
/dev/sda(x)
mount /dev/sda1 /Users/
diskutil
see man diskutil
But as said I guess you can't access this kind of SAN storage device.
Am I completely wrong? It's the procedure in Linux,
so it can't be very different in BSD (say: Mac OS
X)...
Same procedure as every year: install the driver then drink.
-Ralph
Similar Messages
-
ESXi 4.0 with sun storagetek 2500 array server is getting crashed
Hi all,
I have configured ESXi 4.0 in an IBM server followed by creating virtual host in that server. The server was working fine until I connect the server with storage array.
My setup looks like this.
IBM Server installed with ESXi 4.0 (linux version) followed by virtual host creation. the virtual host is Windows 2008 - 64 bit. Once all this setup were made, I have installed a software called CAM module in this server. This module is to manage my Sun storagetek 2500 array family. Suddenly i see my ESXi server (licensed one) is getting crashed. Following is the error message displayed.
Vmware ESXI release build_164009 x86_64
#PF Exception(14) in world 5354:sfcbd in 0X418028840C99 addr 0X410008ebdd84
Press escape to enter local debugger
I got a work around from one of the forum for this similar problem as "increase the swap size may solve this". but i tried that also , but still the issue persists. Swap size is set as twice of the RAM (my ram is with 4 GB,2X dual core AMD processor and HDD capacity is 80GB)
can anyone help me on this.
With regards,
SriHello,
if it's that urgent, why do you post in a user-to-user forum instead of getting in touch with tech support of Vmware, IBM, Microsoft and maybe Sun ?
Michael -
Good Morning!
Are many folks running OVM 3 with a VNX storage array? I'm trying to flesh out the support status.
Right now, the paths look great by default in OVS with =multipath -ll=, but they aren't showing as happy to the VNX, apparently because OVS doesn't have PowerPath or any other agents running. I'm not sure if I should be loading up PowerPath or maybe the Unisphere agent inside the OVS or not.
How are folks configured with their VNX? Have you guys had support issues, either with Oracle or with EMC? How well is failover working for you?
Thanks for any pointers!I very seriously considered VNX about 3 months ago for a Oracle VM project. I ended up going with a ZFS 7420. The ZFS scales a lot better and the jump from a 5300 to a 5500 was far too much in my eyes. Though I will says that EMC got very aggressive in their pricing. More than I thought they would.
The main reason that I didn't like the VNX was due to powerpath. I've never used a EMC product without using powerpath and powerpath wasn't supported in Oracle VM 3 at the time. It might be now.... I'm not sure. Most storage vendors products work well with the native multipahting features within most systems. EMC is the exception. All this is mute if you're going to use Iscsi or NFS. I personally still prefer FC for databases. I just don't think you can beat it.
Support for Oracle VM all the way through was very important to me. Not to mention the fact that if you buy Sun/Oracle hardware, support for everything is built in with premier support for systems. -
Enabling a disk in T3 Storage Array
Currently using a T3 Storage Array where one of the drive slots is showing disabled. We have already replaced the bad disk and power cycled the array to try and enable the drive slot with no success. Does anyone know of a way to enable the drive slot other then deleting the volume and re-adding it?
Actually i was able to try it just yesterday without success. At the moment i have all of the disks previously mentioned installed, plus the new 240gb SSD. For some reason I am unable to add the new disk to the storage pool, and as a result unable
to remove the old 64gb disk.
Shaon, were you able to add a disk to a storage pool that contained a tiered storage virtual disk that consumed 100% of the storage pool space? When I try the options are all grayed out.
I do have backups of all of this data and I am capable of deleting the whole volume and starting over. However, this is new technology I would like to get familiar with in case I am presented with a similar problem in the future without the luxury
of backups. -
Can I use the HP System Recovery Disks from my HP Pavilion dv7t-4000 CTO Select Edition Entertaimnent Notebook PC when I replace the failing hard drive with a smaller storage capacity hard drive? Right now it is a Toshiba 750GB SATA hard disk drive, 5400 RPM, 2.5 inch small form factor (SFF) and I am planning to replace it with the Toshiba HDKCB26 500GB 2.5 inch Hybrid Hard Drive. I read that I cannot use a System Image to restore the hard drive because it is a smaller capacity then the original Hard Drive. If this is true, it seems that my only option is to use the HP Recovery Disks.
Hi:
Normally the HP recovery disks don't work on a smaller hard drive either, but it may be possible in your case if HP offered a 500 GB HDD in that model series.
No guarantees though. -
My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks
If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
What are some of the advantages/disadvantages of using FC or FCoE for a storage array? What does Cisco recommend?
This is what I'm considering:
Power:
1050W Seasonic 80PLUS Gold Power Supply
Motherboard:
ASUS, Rampage IV Extreme, 2011, SATA6, True Quad SLI/XFIRE, Extreme OC Capable
CPU:
Intel Core i7-4960X 3.60GHz, 2133MHz DDR3, 15MB Cache, Hex Core Processor
System Memory:
16GB (4 x 4GB) , PC3-19200, 2400MHz (G.Skill - x79)
Video Adapter 1:
NVIDIA GeForce GTX 780ti 3GB GDDR5
Video Adapter 2:
None
Optical 1
16X Blu-ray Burner - 16xBD-R, 2xBD-RW/16xDVD-R, 8xDVD-RW/48xCD-R, 24xCD-RW
Bay Accessories 1
NZXT Aperture M Multi-media Hub
RAID [Requires Identical Hard Drive Selections]
RAID 0 | 2 Disk Min. Striped set, improved performance, additional storage drive highly recommended
Hard Drive 1
Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
Hard Drive 2
Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
Hard Drive 3
Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
Sound Card
Creative Labs Sound Blaster Z PCI Express -
Bizzare Disk reservation probelm with sun cluster 3.2 - solaris 10 X 4600
We have a 4 node X4600 sun cluster with shared AMS500 storage. There over 30 LUN's presented to the cluster.
When any of the two higher nodes ( ie node id 2 and node is 3 ) are booted, their keys are not added to 4 out of 30 LUNS. These 4 LUNs show up as drive type unknown in format. I've noticed that the only thing common with these LUN's is that their size is bigger than 1TB
To resolve this I simply scrub the keys, run sgdevs than they showup as normal in format and all nodes keys are present on the LUNS.
Has anybody come across this behaviour.
Commands used to resolve problem
1. check keys #/usr/cluster/lib/sc/scsi -c inkeys -d devicename
2. scrub keys #/usr/cluster/lib/sc/scsi -c scrub -d devicename
3. #sgdevs
4. check keys #/usr/cluster/lib/sc/scsi -c inkeys -d devicename
all node's keys are now present on the lunHi,
according to http://www.sun.com/software/cluster/osp/emc_clarion_interop.xml you can use both.
So at the end it all boils down to
- cost: Solaris multipathing is free, as it is bundled
- support: Sun can offer better support for the Sun software
You can try to browse this forum to see what others have experienced with Powerpath. From a pure "use as much integrated software as possible" I would go with the Solaris drivers.
Hartmut -
I have a MBP retina display, early 2013, 512GB SSD storage& I want to upgrade it into a 768GB SSD storage, would that be possible WITHOUT replacing my current storage disks with the new 768GB ?keeping the 512GB&only adding a 256 GB disk?! please advise (:
The main error in this position is thinking ANY sized SSD can be "storage"
Any Macbook SSD should be idealized as a working platform computer system, containing all your applications, documents, and weekly-use necessary files; and all media files such as ‘big-data’ (music/PDF collections/video/pictures), unless directly needed in the near future, should be kept off the computer and on external storage USB or likewise bare hard drives.
You cant do what you want without removing the internal SSD
Officially, it is not possible for an end user to upgrade the storage in any Retina Display MacBook Pro model after purchase
Get a nice 1TB USB external HD for $65 -
I have a Lexar Express Card flash drive (16GB). It works the same as any USB flash drive.
I use it to move files between Mac OS and Windows 7/Bootcamp: Drag files to it in one OS, reboot in the other OS, take the files back off.
Recently, I discovered the Lion Recvoery Disk Assistant, which allows you to create a Lion Recovery Disk on an external drive (just in case). So, I decided I would use a ~1GB partition on the express card for the recovery disk, and leave a ~15GB partition for the same file sharing I am used to.
This setup requires that the disk use a GUID Partition Map with a HFS+ file system for the recovery partition, and I use a FAT32 file system for the shared partition. The partitioning was done in Mac OS Disk Utility, and then I think the Recovery Disk Assistant modifies it further by adding an EFI partition.
When I try to access the disk in Windows 7, it says it needs to format the drive first (which it shows to be a ~200MB "volume" on a disk with ~15.4GB "capacity"). From what I have been able to find on my own, Windows 7 should be fine with a disk using a GUID Partition Map, and both OSs can use a FAT32 file system. So why does Windows only see the 200MB EFI partition at the first section of the disk, and not the other partitions, particularly the FAT32 file sharing partition?
The last thing I will mention is that the disk is being seen by Windows as a MBR/Master Boot Record partitioned device. I'm assuming this is the GPT/GUID Partition Table's protective partition's fault; the one MBR partition that keeps the GPT partitioning safe from software that doesn't recognize or know about GPT.
I'm asking on the Apple discussions because it's in Boot Camp and I'm primarily a Mac user. If anyone knows a better, Windows-focused place to ask, please say so!You really need to search first as there are A LOT of post's with the same question. Different issues with different Models.
What model/year do you have and what OS were you using first? Snow Leopard (10.6) is the last one that came with a CD/DVD with the computer.
You insert the disk when it's done installing W7 and reboots into Windows then you insert the 10.6 MacOS Installer disk for the Windows drivers. Lion does it a different way.
PR7 wrote:
...........because I lost the OS X Lion install disk that came with my Mac)..........
Lion (10.7) is only a download now, there are no more physical disk's, (unless you pay the extra money for the USB installer thumb drive directly from Apple). So if your computer came with 10.7 Lion installed then you will not have a physical disk. There should be a "Repair Partition" that you use to boot to if you need to repair or to reinstall the Lion OS.
PR7 wrote:
However, when I log on my Windows account and I insert the bootable OS X Lion install disk, Windows doesn't read it. I can't even find the disk in Windows Explorer or even Right Click on the disk.
Please Help!
Thank You!!!
I don't believe the Boot Camps drivers are in the Lion download anymore, ( to keep the download smaller?), the only way you get them now is when you start BCAssistant, it will prompt you to download them onto a CD, or USB drive. You have to download and install the Boot Camp drivers separately. You then insert it when it's done, when Windows boots. -
Sparc Storag Array 102 needs to run under solaris 10
I need to get a Sparc Storage Array to run under solaris 10. The soc driver that is needed is not supportted under solairs 10. I took the packages needed off of solari 9 cd and installed them but no luck. I tried to to do a modload and modinfo but it was not there.
The package loaded a file into /kernel/drv/sparcv9/soc. I have solaris 9 onanother disk on the same system and looked at the system trying to copy and edit the files on 10 but not device paths show up in the system. I copyied a file called soc that was in /kernel/drv/ I edited the /etc/device_aliases and path_to_inst but no good.
There are no entries in the /devices/ dir that reference the soc path. I do not if than can work but really would like to get this working.The fibre interface on that beast is NOT a Gigabit connection,
such as is common on current systems.
It was a 100Mbps connection through an array controller,
running with a 40MHz microSPARC II control module.
You'd exceed its throughput capabilities in any attempt
to read or write data at or beyond that 100Mbps rate.
I don't anticipate much assistance in these forums for a technology that goes back a decade-and-a-half.
Contributors familiar with products from that era stopped posting in 2006
when the previous supportforum.sun.com was merged into this one.
We'll all look forward to your guidance after you succeed.
You'll teach the rest of us. -
FC disk not available after storage repository creation failure
Hi,
A storage repo creation job failed because of some network problems. After I fixed up the network problem, I can create another storage repo with another FC disk. When I try creating the failed storage repo again, the FC disk is no longer available for selection. Could the FC disk be left in a "half cooked" state? How can I clear the state and make it available again?
The log of the failed job seems to suggest rollback was completed.
Anthony
Here is the log of the failed job:
Job Construction Phase
Job ID: 1379462348446
begin()
Appended operation 'File System Construct' to object '0004fb0000050000cf5be81d5dd0fdd4 (fs_Prod Repository 1)'.
Appended operation 'Cluster File System Present' to object '6be2487d18f31cdf'.
Appended operation 'Repository Construct' to object '0004fb000003000067df53f34a8d8bdb (Prod Repository 1)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (CREATED): [LocalFileSystem] 0004fb0000050000cf5be81d5dd0fdd4 (fs_Prod Repository 1)
Operation: File System Construct
Object (IN_USE): [LocalFileServer] 0004fb0000090000539b1f10fd72eb68 (Local FS DCOVM3S)
Object (IN_USE): [StorageElement] 0004fb0000180000c4d302d5ef81c194 (Prod Repository 1)
Object (CREATED): [Repository] 0004fb000003000067df53f34a8d8bdb (Prod Repository 1)
Operation: Repository Construct
Object (IN_USE): [LocalFileServer] 0004fb0000090000b6e26fd56c6daeaf (Local FS DCOVM2S)
Object (IN_USE): [LocalFileServer] 0004fb00000900007a5bac864d14bcd3 (Local FS DCOVM1S)
Object (IN_USE): [Cluster] 6be2487d18f31cdf
Operation: Cluster File System Present
Job Running Phase at 2013-09-18 09:59:08,446
Job Participants: [4c:4c:45:44:00:59:4a:10:80:43:b1:c0:4f:44:32:53 (DCOVM1S)]
Actioner
09:59:58,063: Starting operation 'File System Construct' on object '0004fb0000050000cf5be81d5dd0fdd4 (fs_Prod Repository 1)'
10:00:44,300: Completed operation 'File System Construct' with direction ==> DONE
10:00:44,600: Starting operation 'Repository Construct' on object '0004fb000003000067df53f34a8d8bdb (Prod Repository 1)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_B000E Storage plugin command [storage_plugin_mount] failed for storage server [0004fb00000900007a5bac864d14bcd3] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]] OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.StoragePluginAction.processException(StoragePluginAction.java:1358)
at com.oracle.ovm.mgr.action.StoragePluginAction.mountFileSystem(StoragePluginAction.java:1145)
at com.oracle.ovm.mgr.op.virtual.RepositoryConstruct.createRepository(RepositoryConstruct.java:102)
at com.oracle.ovm.mgr.op.virtual.RepositoryConstruct.action(RepositoryConstruct.java:51)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1156)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:865)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:244)
at com.oracle.ovm.mgr.api.virtual.RepositoryProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:230)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:322)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1340)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:106)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:92)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:752)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:467)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:525)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:512)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:449)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:383)
at com.oracle.ovm.mgr.action.StoragePluginAction.mountFileSystem(StoragePluginAction.java:1141)
... 28 more
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:803)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:508)
... 31 more
FailedOperationCleanup
Starting failed operation 'Repository Construct' cleanup on object 'Prod Repository 1'
Complete rollback operation 'Repository Construct' cleanup on object 'Prod Repository 1'
Rollbacker
10:01:25,461: Starting rollbacker...
Executing rollback operation 'File System Construct' on object '0004fb0000050000cf5be81d5dd0fdd4 (fs_Prod Repository 1)'
Complete rollback operation 'File System Construct' completed with direction=DONE
Executing rollback operation 'Repository Construct' on object '0004fb000003000067df53f34a8d8bdb (Prod Repository 1)'
Complete rollback operation 'Repository Construct' completed with direction=DONE
10:01:26,616: Rollbacker completed...
Objects To Be Rolled Back
Object (CREATED): [LocalFileSystem] 0004fb0000050000cf5be81d5dd0fdd4 (fs_Prod Repository 1)
Object (IN_USE): [LocalFileServer] 0004fb0000090000539b1f10fd72eb68 (Local FS DCOVM3S)
Object (IN_USE): [StorageElement] 0004fb0000180000c4d302d5ef81c194 (Prod Repository 1)
Object (CREATED): [Repository] 0004fb000003000067df53f34a8d8bdb (Prod Repository 1)
Object (IN_USE): [LocalFileServer] 0004fb0000090000b6e26fd56c6daeaf (Local FS DCOVM2S)
Object (IN_USE): [LocalFileServer] 0004fb00000900007a5bac864d14bcd3 (Local FS DCOVM1S)
Object (IN_USE): [Cluster] 6be2487d18f31cdf
Write Methods Invoked
09:59:48,867 class="InternalJobDbImpl" vessel_id=94519 method=addTransactionIdentifier accessLevel=6 owningTx=1379462388858
09:59:49,473 class="LocalFileServerDbImpl" vessel_id=33833 method=createFileSystem accessLevel=6 owningTx=1379462388858
09:59:49,601 class="LocalFileSystemDbImpl" vessel_id=94528 method=setName accessLevel=6 owningTx=1379462388858
09:59:50,056 class="LocalFileSystemDbImpl" vessel_id=94528 method=setFoundryContext accessLevel=6 owningTx=1379462388858
09:59:50,064 class="LocalFileSystemDbImpl" vessel_id=94528 method=onPersistableCreate accessLevel=6 owningTx=1379462388858
09:59:50,068 class="LocalFileSystemDbImpl" vessel_id=94528 method=setLifecycleState accessLevel=6 owningTx=1379462388858
09:59:50,077 class="LocalFileSystemDbImpl" vessel_id=94528 method=setRollbackLifecycleState accessLevel=6 owningTx=1379462388858
09:59:51,335 class="LocalFileSystemDbImpl" vessel_id=94528 method=setRefreshed accessLevel=6 owningTx=1379462388858
09:59:51,404 class="LocalFileSystemDbImpl" vessel_id=94528 method=setBackingDevices accessLevel=6 owningTx=1379462388858
09:59:51,428 class="LocalFileSystemDbImpl" vessel_id=94528 method=setUuid accessLevel=6 owningTx=1379462388858
09:59:51,442 class="LocalFileSystemDbImpl" vessel_id=94528 method=setPath accessLevel=6 owningTx=1379462388858
09:59:51,453 class="LocalFileSystemDbImpl" vessel_id=94528 method=setSimpleName accessLevel=6 owningTx=1379462388858
09:59:51,460 class="LocalFileSystemDbImpl" vessel_id=94528 method=addFileServer accessLevel=6 owningTx=1379462388858
09:59:51,466 class="LocalFileSystemDbImpl" vessel_id=94528 method=setStorageDevice accessLevel=6 owningTx=1379462388858
09:59:51,484 class="StorageElementDbImpl" vessel_id=55930 method=addLayeredFileSystem accessLevel=6 owningTx=1379462388858
09:59:51,494 class="LocalFileSystemDbImpl" vessel_id=94528 method=setSimpleName accessLevel=6 owningTx=1379462388858
09:59:51,508 class="LocalFileSystemDbImpl" vessel_id=94528 method=addJobOperation accessLevel=6 owningTx=1379462388858
09:59:51,652 class="LocalFileServerDbImpl" vessel_id=34997 method=addFileSystem accessLevel=6 owningTx=1379462388858
09:59:51,657 class="LocalFileSystemDbImpl" vessel_id=94528 method=addFileServer accessLevel=6 owningTx=1379462388858
09:59:51,664 class="LocalFileServerDbImpl" vessel_id=35300 method=addFileSystem accessLevel=6 owningTx=1379462388858
09:59:51,667 class="LocalFileSystemDbImpl" vessel_id=94528 method=addFileServer accessLevel=6 owningTx=1379462388858
09:59:51,785 class="ClusterDbImpl" vessel_id=25957 method=addLocalFileSystem accessLevel=6 owningTx=1379462388858
09:59:51,821 class="LocalFileSystemDbImpl" vessel_id=94528 method=setCluster accessLevel=6 owningTx=1379462388858
09:59:51,832 class="LocalFileSystemDbImpl" vessel_id=94528 method=setAsset accessLevel=6 owningTx=1379462388858
09:59:52,153 class="LocalFileSystemDbImpl" vessel_id=94528 method=createRepository accessLevel=6 owningTx=1379462388858
09:59:52,261 class="RepositoryDbImpl" vessel_id=94533 method=setName accessLevel=6 owningTx=1379462388858
09:59:52,559 class="RepositoryDbImpl" vessel_id=94533 method=setFoundryContext accessLevel=6 owningTx=1379462388858
09:59:52,567 class="RepositoryDbImpl" vessel_id=94533 method=onPersistableCreate accessLevel=6 owningTx=1379462388858
09:59:52,574 class="RepositoryDbImpl" vessel_id=94533 method=setLifecycleState accessLevel=6 owningTx=1379462388858
09:59:52,582 class="RepositoryDbImpl" vessel_id=94533 method=setRollbackLifecycleState accessLevel=6 owningTx=1379462388858
09:59:54,559 class="RepositoryDbImpl" vessel_id=94533 method=setRefreshed accessLevel=6 owningTx=1379462388858
09:59:54,565 class="RepositoryDbImpl" vessel_id=94533 method=setDom0Uuid accessLevel=6 owningTx=1379462388858
09:59:54,600 class="RepositoryDbImpl" vessel_id=94533 method=setSharePath accessLevel=6 owningTx=1379462388858
09:59:54,606 class="RepositoryDbImpl" vessel_id=94533 method=setSimpleName accessLevel=6 owningTx=1379462388858
09:59:54,621 class="RepositoryDbImpl" vessel_id=94533 method=setFileSystem accessLevel=6 owningTx=1379462388858
09:59:54,627 class="LocalFileSystemDbImpl" vessel_id=94528 method=addRepository accessLevel=6 owningTx=1379462388858
09:59:54,640 class="RepositoryDbImpl" vessel_id=94533 method=setManagerUuid accessLevel=6 owningTx=1379462388858
09:59:54,647 class="RepositoryDbImpl" vessel_id=94533 method=setVersion accessLevel=6 owningTx=1379462388858
09:59:54,668 class="RepositoryDbImpl" vessel_id=94533 method=addJobOperation accessLevel=6 owningTx=1379462388858
09:59:54,844 class="RepositoryDbImpl" vessel_id=94533 method=setSimpleName accessLevel=6 owningTx=1379462388858
09:59:54,866 class="RepositoryDbImpl" vessel_id=94533 method=setDescription accessLevel=6 owningTx=1379462388858
09:59:55,052 class="InternalJobDbImpl" vessel_id=94519 method=setCompletedStep accessLevel=6 owningTx=1379462388858
09:59:55,123 class="InternalJobDbImpl" vessel_id=94519 method=setAssociatedHandles accessLevel=6 owningTx=1379462388858
10:00:44,248 class="LocalFileSystemDbImpl" vessel_id=94528 method=setSize accessLevel=6 owningTx=1379462388858
10:00:44,276 class="LocalFileSystemDbImpl" vessel_id=94528 method=setFreeSize accessLevel=6 owningTx=1379462388858
10:00:44,583 class="LocalFileSystemDbImpl" vessel_id=94528 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:00:45,381 class="RepositoryDbImpl" vessel_id=94533 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:00:45,390 class="InternalJobDbImpl" vessel_id=94519 method=setFailedOperation accessLevel=6 owningTx=1379462388858
10:01:25,618 class="LocalFileSystemDbImpl" vessel_id=94528 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,621 class="LocalFileServerDbImpl" vessel_id=35300 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,629 class="StorageElementDbImpl" vessel_id=55930 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,636 class="RepositoryDbImpl" vessel_id=94533 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,639 class="LocalFileServerDbImpl" vessel_id=34997 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,642 class="LocalFileServerDbImpl" vessel_id=33833 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:25,645 class="ClusterDbImpl" vessel_id=25957 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:26,011 class="LocalFileSystemDbImpl" vessel_id=94528 method=nextJobOperation accessLevel=6 owningTx=1379462388858
10:01:26,607 class="RepositoryDbImpl" vessel_id=94533 method=nextJobOperation accessLevel=6 owningTx=1379462388858
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_B000E Storage plugin command [storage_plugin_mount] failed for storage server [0004fb00000900007a5bac864d14bcd3] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]] OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_B000E Storage plugin command [storage_plugin_mount] failed for storage server [0004fb00000900007a5bac864d14bcd3] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]] OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.StoragePluginAction.processException(StoragePluginAction.java:1358)
at com.oracle.ovm.mgr.action.StoragePluginAction.mountFileSystem(StoragePluginAction.java:1145)
at com.oracle.ovm.mgr.op.virtual.RepositoryConstruct.createRepository(RepositoryConstruct.java:102)
at com.oracle.ovm.mgr.op.virtual.RepositoryConstruct.action(RepositoryConstruct.java:51)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1156)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:865)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:244)
at com.oracle.ovm.mgr.api.virtual.RepositoryProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:230)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:322)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1340)
at sun.reflect.GeneratedMethodAccessor393.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:106)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:92)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:752)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:467)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:525)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: DCOVM1S failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013] [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:512)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:449)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:383)
at com.oracle.ovm.mgr.action.StoragePluginAction.mountFileSystem(StoragePluginAction.java:1141)
... 28 more
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 storage_plugin_mount oracle.ocfs2.OCFS2.OCFS2Plugin /OVS/Repositories/0004fb000003000067df53f34a8d8bdb true [], Status: org.apache.xmlrpc.XmlRpcException: OSCPlugin.OperationFailedEx:'Unable to mount file system "/dev/mapper/3600601600aa02c001cb0a6bfbcf4e211": mount.ocfs2: Cluster name is invalid while trying to join the group\r\n' [Wed Sep 18 10:00:45 EST 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:803)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:508)
... 31 more
End of JobDeleting the LUN sounds like a good clean way but unfortunately it did not work. After I recreated the LUN from the storage array, OVM is left with a "phantom" LUN which I cannot delete. Secondly I now get a OCFS2 lock which I don't know how to clear.
Please help. -
Storage Array???
Dear All,
Yesterday I was given a Storage Array and I have no idea what it is.
It is Grey with 7 HDD M2949ESP Drives (9 GB Fujitsu HDD). I have connected to my Solaris 9 box and it is showing lots of 2 GB drives. Can anyone tell me how I can identify the the unit and reconfigure the drive to be 7 X 9 GB drives?
thanks in advance,
HughSome of the early Sun storage arrays had 7 slots, but to be sure and to identify your item correctly we would need partnumbers.
Here are a couple of examples of 7 slot SPARCstorage arrays:
http://sunsolve.sun.com/handbook_pub/Systems/SSA_214_7Slot/S SA_214_7Slot.html
http://sunsolve.sun.com/handbook_pub/Systems/SSA_219_7Slot/S SA_219_7Slot.html
I think you have the 219 model as it supports disks that are similar to your Fujitsu 2949. -
Sun VDI 3.1.1 error with Sun 7310
Hello,
I'm working on a Sun VDI solution using a 7310 with Sun Storage 2010.Q1.0.0 and am having a provisioning error when importing a template or desktop. It errors about copying disk image to storage. Upon switching to a Solaris ZFS storage server the issue goes away. I'm curious if anyone else has run into this issue and if the Sun Storage OS should be update or if there are specific configuration variables that should be set in the ZFS storage pool being used by the Sun VDI implementation.
Thank you,
MikeOkay, after some issues with the 7310 that is being used for this pilot I was able to do some more testing to generate logs around the failures. I have been able to get this to work with a regular Solaris 10 iSCSI and NFS server that uses ZFS. In fact it worked perfectly but that isn't the storage array that is meant for this project. The Sun VDI implementation is accessing the 7310 using the 'root' account and is connecting over gigE SAN. We can see Sun VDI logging into the storage array, it creates the '/suspend-data' NFS share right away as it should. When I got to import a template you can see it deploy the iSCSI LUN and the associated Target and IQN.
Here are snippets from the cacao log showing the different failure messages.
Jun 17, 2010 3:42:58 PM com.sun.vda.service.vbox.VBDesktopProvider createDesktops
FINE: thr#22 Created desktop on 10.72.169.169 with volume ec0263c0-eaef-4636-a2ac-96046e4fc81e at IQN iqn.1986-03.com.sun:vdi:kgksyhsior0abizjhg.g:exlbox2mm0szsgnr7ed- of size 17179869184
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistenceImpl commit
FINEST: thr#22 Committing object [id=14] class com.sun.vda.service.persistence.PersistentStorage
Jun 17, 2010 3:42:58 PM com.sun.vda.service.storage.Volume importFromFile
FINEST: thr#22 Copying from /sunvdi/templates/solaris10/solaris10.vdi to ec0263c0-eaef-4636-a2ac-96046e4fc81e on host 10.72.169.169 for user root
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#22 Updating object [id=14] class com.sun.vda.service.persistence.PersistentStorage
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistentJob commit
FINEST: thr#22 Committing object [id=null] class com.sun.vda.service.persistence.PersistentJob
Jun 17, 2010 3:42:58 PM com.sun.vda.service.core.jobs.Job run
INFO: thr#23 Starting Job[192]: STORAGE_ACTION for [Solaris 10, STORAGE_AND_ISCSI_RESSOURCE: INITIATOR:iqn.1986-03.com.sun:01:2a95e6efffff.4beb10d0]
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#23 Updating object [id=192] class com.sun.vda.service.persistence.PersistentJob
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistentJob commit
FINEST: thr#23 Committing object [id=192] class com.sun.vda.service.persistence.PersistentJob
Jun 17, 2010 3:42:58 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#23 Updating object [id=14] class com.sun.vda.service.persistence.PersistentStorage
Jun 17, 2010 3:42:58 PM com.sun.vda.service.vbox.SshServer executeCommand
FINEST: thr#23 Executing command script run('cd /') ; run('configuration') ; run('san') ; run('initiators') ; run('iscsi') ; run('create') ; run('set alias=vdi:2a95e6efffff.4beb10d0') ; run('set initiator=iqn.1986-03.com.sun:01:2a95e6efffff.4beb10d0') ; stdout = run('commit') ; print(stdout) on host 10.72.169.169:22 for user root
Jun 17, 2010 3:43:00 PM com.sun.vda.service.vbox.SshServer executeCommand
FINEST: thr#23 executed script run('cd /') ; run('configuration') ; run('san') ; run('initiators') ; run('iscsi') ; run('create') ; run('set alias=vdi:2a95e6efffff.4beb10d0') ; run('set initiator=iqn.1986-03.com.sun:01:2a95e6efffff.4beb10d0') ; stdout = run('commit') ; print(stdout)
Jun 17, 2010 3:43:00 PM com.sun.vda.service.vbox.SshServer executeCommand
FINEST: thr#23 Executing command script run('cd /') ; run('configuration') ; run('san') ; run('initiators') ; run('iscsi') ; run('groups') ; run('create') ; run('set name=vdi:2a95e6efffff.4beb10d0') ; run('set initiators=iqn.1986-03.com.sun:01:2a95e6efffff.4beb10d0') ; stdout = run('commit') ; print(stdout) on host 10.72.169.169:22 for user root
Jun 17, 2010 3:43:01 PM com.sun.vda.service.vbox.SshServer executeCommand
FINEST: thr#23 ...
Jun 17, 2010 3:43:01 PM com.sun.vda.service.storage.Initiator$CommitThis doAction
FINEST: thr#23 Committing initiator com.sun.vda.service.storage.Initiator@16708cc
Jun 17, 2010 3:43:01 PM com.sun.vda.service.persistence.PersistenceImpl commit
FINEST: thr#23 Committing object [id=null] class com.sun.vda.service.persistence.PersistentStorageInitiator
Jun 17, 2010 3:43:01 PM com.sun.vda.service.persistence.PersistentJob commit
FINEST: thr#23 Committing object [id=192] class com.sun.vda.service.persistence.PersistentJob
Jun 17, 2010 3:43:01 PM com.sun.vda.service.core.jobs.Job run
FINE: thr#23 Job[192]: STORAGE_ACTION for [Solaris 10, STORAGE_AND_ISCSI_RESSOURCE: INITIATOR:iqn.1986-03.com.sun:01:2a95e6efffff.4beb10d0] finished.
Jun 17, 2010 3:43:02 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#22 Updating object [id=14] class com.sun.vda.service.persistence.PersistentStorage
Jun 17, 2010 3:43:02 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#22 Updating object [id=14] class com.sun.vda.service.persistence.PersistentStorage
Jun 17, 2010 3:43:02 PM com.sun.vda.service.storage.Volume$CommitShareData doAction
FINEST: thr#22 Committing target:com.sun.vda.service.storage.Target@65e initiator:com.sun.vda.service.storage.Initiator@6bc lun:-1
Jun 17, 2010 3:43:02 PM com.sun.vda.service.persistence.PersistenceManager retry
FINEST: thr#22 Error committing target: com.sun.vda.service.storage.Target@65e Trying again ...
Jun 17, 2010 3:43:02 PM com.sun.vda.service.persistence.PersistenceImpl update
FINEST: thr#22 Updating object [id=41] class com.sun.vda.service.persistence.PersistentStorageVolume
Jun 17, 2010 3:43:02 PM com.sun.vda.service.storage.Volume$CommitShareData doAction
FINEST: thr#22 Committing target:com.sun.vda.service.storage.Target@65e initiator:com.sun.vda.service.storage.Initiator@6bc lun:-1
Jun 17, 2010 3:43:02 PM com.sun.vda.service.vbox.SshServer executeCommand
FINEST: thr#22 Executing command script run('cd /') ; run('shares') ;run('select sunvdi') ; run('select ec0263c0-eaef-4636-a2ac-96046e4fc81e') ; run('set writecache=true') ; run('set status=online') ; run('set targetgroup=vdi:exlbox2mm0szsgnr7ed-') ; run('set initiatorgroup=vdi:2a95e6efffff.4beb10d0') ; stdout = run('commit') ; print(stdout) on host 10.72.169.169:22 for user root
Jun 17, 2010 3:43:04 PM com.sun.vda.service.vbox.SshServer executeCommand -
Quicktime disables one of the disks in my RAID 5 array.
Hi,
I have just installed ver 7.2 of Quicktime and after I began playing a Quicktime movie file one of the disks on my RAID array came up as failed. I have managed to recover this problem, but is there anything I can do to stop this happening again???... (apart from going back to XP )
Cheers,
Mark.I just had the same problem. This is the second time I'm having this issue, the first time was when I installed Quicktime the first time a couple months ago, I don't remember which version it was (cannot remember if it was during the installation of the first file I played). I lost one of my drive in my RAID 0 or 1 (mirroring), fortunately I was able to rebuilt the image.
The second was few minutes ago when I was trying to play the HD trailer of Rush Hour 3. But this time my computer could reboot, my 2 drives was marked as failed!!! I was really scared to lose my data. Fortunately when I went in the RAID controller setup, it was able to find one of my drive and now the second one is rebuilding. The first thing I did when I rebooted was to uninstall that crap of quicktime and will never install it again.
My config: Vista Ultimate 64, motherboard Asus P5B Deluxe with Intel Matrix Storage. Quicktime 7.2 updated few days ago.
Maybe you are looking for
-
How do i find messages in trash back to 7/12/2014
I have checked save all messages on this computer I cannot go back past 7/21/2014 How do I go further in trash
-
IPod Nano, Windows, and USB driver quirkiness question
Hey all, I recently helped someone who was suffering from two separate, show-stopping iPod/iTunes problems to get things into such a state that they could actually make use of both. Things seem to be working fine, though one of our solutions seems to
-
WHY CAN'T I DOWNLOAD EBOOKS FROM THE N.C STATE LIBRARY?
I HAVE DOWNLAODED THE ADOBE DIGITAL EDITION AS REQUESTED IN ORDER TO UPDATE MY KINDLE PAPERWHITE READER. I HAVE SIGNED ON AND DID EVERYTHING REQUESTED BUT STILL CANNOT DOWNLOAD EBOOKS ON MY KINDLE. I LOOKED AT THE FORMS AVAILABLE AND KINDLE IS NOT
-
Hello, Quick question - I'm building my portfolio with Adobe Indesign and I'm using the gradient feather tool to create reflections but when I export as a PDF I have two problems when viewing in Preview. The first problem is that the gradient feather
-
Inconsistent type weight when printing pdf (acrobat X)?
I am having trouble getting type type in my pdf document to appear consistent when printing to the office printer. - the file is originally a ID CS6 document - I export to press quality - the typeface in question is an open type font - the pdf looks