Dell E-Series 6420 new e1000e NIC not supported

Hello
I just received an E6420 test device from Dell which comes with an Intel(R) 82579LM.
Before building a drivers addon image I usually backup the original install. This would fail because the NIC was not recognized. I updated my distribution point (running ZCM 10.3.3) with the March 2011 imaging drivers update but to no avail.
Doing a "hwinfo --netcard" I get this:
13: PCI 19.0: 0200 Ethernet controller
[Created at pci.317]
Unique ID: kpGf._KB7QaMdYy9
SysFS ID: /devices/pci0000:00/0000:00:19.0
SysFS BusID: 0000:00:19.0
Hardware Class: network
Model: "Intel Ethernet controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1502
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0493
Revision: 0x04
Memory Range: 0xe6e00000-0xe6e1ffff (rw,non-prefetchable)
Memory Range: 0xe6e80000-0xe6e80fff (rw,non-prefetchable)
I/O Ports: 0x5080-0x509f (rw)
IRQ: 5 (no events)
Module Alias: "pci:v00008086d00001502sv00001028sd00000493bc02sc0 0i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
27: PCI 300.0: 0280 Network controller
[Created at pci.317]
Unique ID: svHJ.KbYy38JBRYC
Parent ID: qTvu.Ki9Ho6gDqLB
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Intel Network controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0082
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1321
Revision: 0x34
Memory Range: 0xe6d00000-0xe6d01fff (rw,non-prefetchable)
IRQ: 10 (no events)
Module Alias: "pci:v00008086d00000082sv00008086sd00001321bc02sc8 0i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
I found that newid="0x8086 0x0082,e1000e" lets the linux env recognize the NIC but when loading/installing the driver it freezes.
Any idea how to solve this would be highly appreciated!
Thanks
Martin

Originally Posted by mschroet
Ok, I found that newid="0x8086 0x1502,e1000e" works fo r82579LM after the March 2011 imaging drivers update - before the update it did not.
So that is the solution for now. Would be nice if Novell includes that in the April 2011 imaging drivers update.
Thanks!
I tried the same with the March 2011 imaging update, but still won't load the device. Have you heard an ETA on an imaging update with the compiled bootdisc with supporting driver?

Similar Messages

Load balancing 10g forms - Connection from new browser window not supported

Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.

You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead...

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ

Why New Apple maps not supporting the direction of route in the UAE; which was supported in ios5.Please help

Why New Apple maps not supporting the direction of route in the UAE; which was supported in ios5.
When it is going to resolve

iOS 6 Which Features in What Countries...
http://www.apple.com/ios/feature-availability/

I would like to remove version 4 and go back to 3.5 or 3.6 for my mac because the new version is not supported in my college's uen site; how do i do this?

this is the webpage that is not supported yet by the new version
https://online.uen.org/webct/entryPageIns.dowebct

Trash Firefox 4, then install Firefox 3.6. You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
When you trash Firefox 4 it will not remove your bookmarks, passwords etc, they are stored elsewhere and will be used when you install Firefox 3.6

Problems with new display, "Input not supported"

So, I just got myself a new LCD screen (Acer AL2016WCbd) for my G4 (DP 1Ghz Quicksilver 2002 w/ 10.5 installed). The monitor seems to work alright and everything with my Windows box, but whenever I try to use it with my G4 the monitor goes black, flashes an error box saying "Input not supported," and then goes to sleep. It does show the boot screen... the gray background and Apple logo... but goes black after that.
I've tried rebooting, resetting the PMU, tried booting in Single User and Verbose mode, tried hooking the G4 up to another monitor and lowering the resolution to 800x600 @ 75Hz and then reconnecting the Acer, but no dice.
My only other ideas are to try hooking it up over DVI instead of VGA (though I'd need to get an adapter for that); playing around with a few different things in target disk mode by hooking it up to my laptop (which I don't currently have); and trying to boot from my Leopard install disk (when I find it). Might any of these things do any good? Is there anything else I haven't thought of? Or am I just wasting my time?

OK, so I can get the display working if I first boot up with another display, set the resolution to whatever I want it to be, then hotswap in the Acer that's been giving me the problems. But once I restart my computer I have to go through the whole process again. Either the tower isn't picking up on the display profile from the monitor or the monitor just isn't sending it to the tower.
My question now is: is there a way to for me to lock the resolution and refresh rate, so it always outputs at, say, 1680x1050 at 60Hz? Both Newegg and Acer have been giving me all kinds of (excuse me here) sh** about how they can't help me, so I really don't want to deal with them anymore by having to return/exchange the monitor or get it serviced. I mean, I know the thing works and I know the resolution I want it to run at. I just want to be able to lock it so Leopard doesn't revert to some unsupported output every time I reboot.

He query expression 'new f__AnonymousType1 is not supported.

he query expression 'new <>f__AnonymousType1`1(PercentComplete = s.PercentComplete)' is not supported.
error message in project server 2013 using object model.
vijay

he query expression 'new <>f__AnonymousType1`1(PercentComplete = s.PercentComplete)' is not supported.
error message in project server 2013 using object model.
vijay

Need to reinstall older version new one does not support finger scanner

I updated to newest version how can i download older version that supported associated dpql files

Google Toolbar doesn't support newer versions of Firefox because Google decided that its functionality was mostly built into Firefox itself now or otherwise available via a Firefox addon:
* http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
Google provides the following help article on the topic:
* http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356
Note that Firefox 4 is not supported by Mozilla anymore. To get the required security and stability updates, users need to install the later Firefox updates (currently Firefox 7..0.1).

3GS iOS4.1 new sim card not supported

Hi guys, I own a PAYG iPhone that was bought direct from apple. I have been using it on O2 for the last year but I have just signed up for a Vodafone contract. I received my new sim card and put it in, it now goes to the emergancy calls pages and itunes says that the sim card is not supported.
The phone has never been jailbroken or anything in anyway. I have tried restoring the phone and this has made no difference.
Tried the sim in another phone and it worked fine.
Any ideas?

Doesn't sound like it.
I would contact O2 to determine if your pay-as-you-go iPhone that was used with O2 over the last year is carrier locked with O2. If the iPhone is carrier locked with O2, it will be up to O2 to unlock the iPhone.
If you specially requested an unlocked iPhone when purchased from the Apple store which is the most expensive, you need to contact the Apple store.

The new Ovi Suite not supporting Lotus Notes anymo...

Hi,
I recently upgrade to Ovi Suite 2.0.1.35, which I found that it couldn't sync with Lotus Notes anymore. How to troubleshoot this? This is a serious problem in support continuanity...

as of now u cant do any troubleshooting
NOS 2.0 is not supporting any other PIM xecpt Outlook & Windows Calendar&Contacts. Keep ur fingrs Xed, it may included in future
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

NEW MACBOOK DOES NOT SUPPORT FINAL CUT EXPRESS!!!

I just got my new MacBook 13" and tranferred all my files/applications from my older iMac (purchased 2004). When i try and open Final Cut Express, i receive the messege 'needs AGP graphics card'
I dont have access to the internet and so cannot receive an upgrade on my F.C.E.... and i bought the laptop specifically to do my editing on the move!!!
Its rediculous, why didnt the guy who i bought it from tell me, even tho he asked what i'd use it for and i told him!
has anyone got any suggestions? anything at all!!
(and ps: can you BUY such a card? if so, how much am i looking at? I seriously cannot afford anything after buying this laptop!)
Im despairing and freaking out!
Help!
Thanks

Lara,
I don't use Final Cut Express, however, based on the information that you've provided, you're attempting to use a Power PC Based version of FCE, not Universal. Your iMac was most likely a G5? Your new MacBook is an Intel. Different processors.
In order to use Final Cut Express on your MacBook, most likely you're going to need to upgrade FCE.
To answer your last question, there's no option for purchasing a graphics card for the MacBook.

Why does New Gen sbRIO not support Scan Engine?

The 'New Gen' sbRIO's use the LX25 and LX45 FPGA and it seems that none of them support the scan engine. cRIO's that use the same FPGA do support the scan engine. Is it just a RIO driver issue? If so when will this be resolved?

Hi sachsm,
I was told initially that it is a performance issue, but after doing some extra research I have found that it cannot be the case. You are right that the cRIOs that have the LX25 and LX45 FPGAs support the scan engine, so the answer lies outside the bounds of performance requirements. I spoke with some of our more senior engineers, who believe that R&D has phased out scan engine support for the newer sbRIOs based on the majority use cases for which they are deployed. Notice on the product pages for these devices that only OEM quantities are available for purchase, meaning that most of our customers for these are companies producing many units, and who generally desire to use the FPGA interface (not the Scan Interface). Each sbRIO that currently supports the Scan Interface (older models) has a custom scan engine bitfile that is written to the FPGA, and I guess someone on the development side of things decided that it wasn't worth the effort to write scan engine bitfiles for these new models. There is no indication that these will be supported by the scan interface in the future.
cRIO, on the other hand, is intended to have custom and reconfigurable module setups, and thus will always require the scan engine for those who wish to use the real-time functionality without having to deal with the FPGA interface.
I hope that this clears up some of the confusion!
Kevin W.
Applications Engineer
National Instruments

New version does not support RoboForm, went back to 3.6, get back to me when you make one we can use!

new version disabled RoboForm, don't know why you put a new version out when we can't use it, went back to 3.6, it was either that or go back to Explorer. NOT IMPRESSED!

Firefox is free, always has been, and will always be free. So much for your conspiracy theory.
Roboform came out with a greatly enhanced version 7 that replaced version 6, with a lot of new features, so if you don't need all those new features why don't you use the "RoboForm Lite Standalone Extension" version of Roboform instead of the full version? <br />
http://www.roboform.com/platforms/browsers/firefox <br />
https://addons.mozilla.org/en-US/firefox/addon/roboform-online-password-manag/?src=ss

Dell E-Series 6420 new e1000e NIC not supported

Similar Messages

Maybe you are looking for