Dell Inspiron 1520 - disk problem

Hi. I have Dell Inspiron 1520 and even if I set hdparm -B 254 /dev/sda or 255, disk still makes clicking noises. Hdparm command fixed that in ubuntu, here it doesn't. Is there any other way to stop clicking? Ty.

Disabling disk power mangement in the BIOS worked for me. If that doesn't to the trick, is the hdparm command getting run at every boot (appending it to /etc/rc.local is an easy way)?
cheers,
Last edited by somedrew (2008-07-11 01:21:42)

Similar Messages

[i8kfan]Dell Inspiron 1520

Hi,
I am facing an issue with configuration my fans on my Laptop(see topic name). From what I know, I tested everything:
-I installed i8kutils and i8kmon, and edited the files .i8kmon and /etc/i8kutils/i8kmon.conf(with the same config), but it did nothing
-I even installed i8kmonitor, from aur, but same result, nothing changed
So if someone could please help, it would be nice
Thanks for any response
P.S:sorry for my bad english(but I'm french)
[Edit]Knowing that I have a inspiron 1520, or more specifically a dell, can this solution work for my laptop?
Thanks again for any response[Edit]
Last edited by Scriptor (2011-01-17 16:35:23)

Disabling disk power mangement in the BIOS worked for me. If that doesn't to the trick, is the hdparm command getting run at every boot (appending it to /etc/rc.local is an easy way)?
cheers,
Last edited by somedrew (2008-07-11 01:21:42)

Dell Inspiron 1525 sound problem

Hello!
I installed Arch x86_64 on my laptop. All devices work fine. But after suspending to ram or disk, sound just disappeared. OS thinks that, sound is still exists, but I can't hear any sound.
Reboot can help but this is not a solution. Please help me
$ lspci -k
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Dell Device 022f
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

Have you read the wiki and set the "model" option for your sound card? I have no problems suspending to RAM (I've never tried suspending to disk) and I'm using ALSA, too.
http://wiki.archlinux.org/index.php/Del … probe.conf
I use the option that is above, "dell-bios", but another user had a problem with it and uses the one below. Try both and see if it helps.

Installation on a DELL Inspiron 6400 Laptop - PROBLEMS!!!!

Hi All,
I'm a newbie to Solaris 10 and decided to install the OS on my laptop with XP, OpenSUSE 11, Open Solaris and finally Solaris 10. When i have finished the complete installation, Solaris will re-start and i select Solaris 10 and eventually i get a sendmail error message, which i Ignore and i wait for the desktop login screen to appear before i log in. However, im constantly waiting and nothing happens and there is no GUI and its just hangs. Is anyone experiencing this problem and if they have managed to fix this i would very much appreciate all the help i can get!!
Regards,
Sunil

I found this website very helpful while I was installing my Solaris software and encountered some problems. You can also check it out in here. http://docs.sun.com/app/docs/doc/817-0544
Liza

Duplicate instances of Itunes after install on my Dell Inspiron N7010

I attempted to download and install the latest ITunes 64 bit on my Dell Inspiron N7010 with Windows 7. The download is fine, but once installed, ITunes appears to write over my existing applications on my desktop, replaces the applications with the ITunes icon and if you click on each my ITunes library will display. Example, I had Adobe Acrobat on my desktop, once Itunes was downloaded and installed, the adobe icon is replaced with the Itunes icon and if you click on it, my Itunes library displays. I have a desktop folder with documents and images that was not written over. I have a shortcut to Roxio that was not written over. Microsoft Office was not written over. I downloaded and installed ITunes (not 64 bit) on another Dell Inspiron 1520 laptop (an older laptop with Windows Vista) with success. I checked settings on both and they appear to be identical. I also have a menu across the top of my desktop that is docked with a explorer icon and other accessories that was not affected by the install. Can someone help me with this? I have installed and uninstalled Itunes about 10 times, checking settings and each time I get the same problem. Thanks.

moved to correct topic.

[SOLVED] Function Keys Problem On Dell Inspiron N5010

Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)

xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

Solaris 8 & Keyboard Problem on DELL Inspiron Laptop

Hi all,
Trying to install Solaris 8 on Dell Inspiron 4000 laptop, but the keyboard gets stuck at the stage where I need to select the language. No response to keyboard and the machine just hangs. The keyboard works initially, I used the F2 key to continue to the next screen. Has anyone seen this before? Any help is much appreciated.
Thanks
[email protected]

I'm experiencing this exact problem on my Dell Inspiron 4000 as well. When I trying to select the Language stage of the installation, my laptop responds with garble text, and then the laptop locks up. Please let me know if you have a resolution.
vinh
[email protected]

Dell Inspiron 1525 Problems

Hello.
I just purchased a Dell Inspiron 1525 with Vista Home Premium preinstalled. I wanted to know if there is a way to install a fully working Arch Linux system on it. I tried with 2007.08 CD only to fail at getting the wireless card to work. Dell Inspiron 1525 comes with a Dell Wireless 1390 WLAN Mini Card. I tried installing both the latest vista and xp drivers for this card via ndiswrapper. I thought all was well since I got the message that said that the driver is installed and the device was present. However, when I checked iwconfig, the normal 'wlan0' was not in the list, just 'lo'. Can someone help me with this?
Also, I used a ZenWalk liveCD to test out if I have sound support. It seems like the sound doesn't work either, but that may be because I used an old liveCD. The 1525 comes with a 'SIGMATEL STAC 92XX C-MAJOR HD Audio' or also known as "High Definition Audio 2.0".
I have also learned that although Dell does offer this laptop with Ubuntu installed, they changed the wireless card on the ubuntu version. I don't know if that means anything. Also, I have heard of many who have gotten linux installed on this laptop. I have some experience with linux, but all of that is with a desktop pc. (Used Arch for the longest after trying out Gentoo ^^)
I checked the Ubuntu forums on this matter, and they seem to have a lot of documentation on it, but I am unsure if it will apply to Arch. Does Arch come with the bcm43xx drivers? If it does, then that means I have to blacklist it or something. I really need help.
- Dennis ^^
PS: Thanks in advance for any help!

Thanks for all of the replies. I downloaded the newest ISO and tried to get it working again. Well, b43 did not really work as I hoped it would, so I went and used ndiswrapper. To my astonishment, it works. Apparantly, something changed from the 2.6.22 to 2.6.24 kernels that made it so that the ndiswrapper module won't be detected with a broadcom card with the 2.6.22 kernel. This is all a guess, but it kinda makes sense. Only one problem though, I did all of the usual steps to set up the wireless connection... and it can't seem to connect to the internet... I did:
iwconfig wlan0 essid ********
iwconfig wlan0 mode Managed
iwconfig wlan0 key restricted **********
ifconfig wlan0 up
dhcpcd wlan0
*I have tried this with other network cards, those on my desktop, and they worked fine.
When I do 'iwlist wlan0 scanning' , I detect all the networks that I expected to see, but it doesn't connect to any of them, which I think is really weird.
I don't really care much for vista, but I miss messing around with a decent CLI, and I will be majoring in Computer Science once I get into college, which would definately include classes on Bash scripting, so I wanted to get a linux install on my laptop since my desktop died. I have experience with Ubuntu, Gentoo (Stage 1 and Stage 3 installs.. Stage 1 was a giant pain and failed the first 4 times), ZenWalk, MEPIS, SuSE, Fedora, Arch, and some others. Of all of these, I liked Arch the best. So, I was really hoping I could get it installed.
Well, it seems I will be stuck with vista for a while... but I must say, it's not AS bad as I thought it would... still slow and all though ^^
@anti-neutrino:
Hello. Dual-booting is tricky stuff in my opinion. I have never done it myself, so I can't really help you there. But, there are plenty of documentation out there on it. According to http://www.goodells.net/dellrestore/mediadirect.htm, DellMediaDirect is installed on a hidden partition. So, I'm guessing that as long as you don't touch that partition, it would still be there. What I think you would have problem with is where to put grub (or lilo). The safest thing to do, I would think, is to place it in a floppy, if you have an external floppy drive, or place grub into a USB Flash drive which you would be able to boot from. I have no idea how to do this in Arch, but I have done it before in SuSE. And as for Vista, as long as you don't touch the vista partition, it should stay the same. The booting is the only problem I can see for you. If the boot loader (grub or lilo) is installed in a separate medium (floppy/USB) then to boot into the linux partition, all you would have to do is boot from the medium, eitherwise, it would boot into Vista (or whatever you have that boots up first) automatically.. that is unless they changed something, and knowing how fast linux is developed, there are a lot of changes, so I'm not really sure if it still works this way.
@Warper:
I don't really mind the sound right now. If I can get internet to work, I know I can solve all the other problems later, as all I need to do is look up how to solve for it. But, yeah I know sound is muted by default in Arch. It's just that with my desktop, sound was automatically detected by other LiveCD's that I was confused when those same LiveCD's couldn't detect it. Again, this might just be that the LiveCD's use an older kernel.
- Dennis ^^
PS: I reinstalled vista and wrote this post in it. T_T
Last edited by skittlehawk (2008-06-06 23:30:16)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Problem facing installing Solaris 10 on Dell inspiron 6400.

Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
Saurabh

Hi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
     No Solaris Driver
     Multimedia
     Intel Corporation
     82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
     No Solaris Driver
     Network
     Intel Corporation
     PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
     Solaris 10 11/06
     Firewire
     Ricoh Co Ltd
     Unknown device
     hci1394
Note-1
     Note-1
     Network
     Broadcom Corporation
     BCM4401-B0 100Base-TX
     bfe
Solaris 10 11/06
     Solaris 10 11/06
     Video
     Intel Corporation
     Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
     vgatext
Solaris 10 11/06
     Solaris 10 11/06
     Storage
     Intel Corporation
     82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
     pci-ide
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #1
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #2
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #3
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #4
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB2 EHCI Controller
     ehci

Strange bluetooth problem dell inspiron 1545 laptop

Hello friends, I've got a full working install of arch on my dell inspiron 1545 laptop. At first, bluetooth was working with the blueman-applet. After an upgrade to bluez(i suppose), it suddenly stopped working. The laptop bluetooth is on, the device is discoverable, it even successfully recognizes the phone I'm trying to pair. But earlier, it was showing the phones name but now it only shows the mac address in blueman and in "hcitool scan" output, it shows:
hcitool scan
Scanning ...
00:1B:EE:16:63:5E n/a
I've got the following bluetooth services running:
bluetoothd hidd rfcomm
Here my /etc/rc.d/bluetooth file:
#!/bin/bash
# Start/stop the Bluetooth daemons
. /etc/rc.conf
. /etc/rc.d/functions
DAEMON_NAME="bluetoothd"
HIDD_NAME="hidd"
RFCOMM_NAME="rfcomm"
PAND_NAME="pand"
DUND_NAME="dund"
DAEMON_EXEC="/usr/sbin/bluetoothd"
HIDD_EXEC="/usr/bin/hidd"
RFCOMM_EXEC="/usr/bin/rfcomm"
PAND_EXEC="/usr/bin/pand"
DUND_EXEC="/usr/bin/dund"
DAEMON_ENABLE="true"
HIDD_ENABLE="false"
RFCOMM_ENABLE="false"
DUND_ENABLE="false"
PAND_ENABLE="false"
RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
HIDD_OPTIONS=""
DUND_OPTIONS=""
PAND_OPTIONS=""
[ -f /etc/conf.d/bluetooth ] && . /etc/conf.d/bluetooth
case "$1" in
start)
stat_busy "Starting bluetooth subsystem:"
if [ "$DAEMON_ENABLE" = "true" -a -x "$DAEMON_EXEC" ] ; then
stat_append " $DAEMON_NAME"
$DAEMON_EXEC
sleep 1
fi
if [ "$SDPD_ENABLE" = "true" -a -x "$SDPD_EXEC" ] ; then
stat_append " $SDPD_NAME"
$SDPD_EXEC
fi
if [ "$HIDD_ENABLE" = "true" -a -x "$HIDD_EXEC" ]; then
stat_append " $HIDD_NAME"
$HIDD_EXEC $HIDD_OPTIONS --server
fi
if [ "$RFCOMM_ENABLE" = "true" -a -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ]; then
stat_append " $RFCOMM_NAME"
$RFCOMM_EXEC -f $RFCOMM_CONFIG bind all
fi
if [ "$DUND_ENABLE" = "true" -a -x "$DUND_EXEC" -a -n "$DUND_OPTIONS" ]; then
stat_append " $DUND_NAME"
$DUND_EXEC $DUND_OPTIONS
fi
if [ "$PAND_ENABLE" = "true" -a -x "$PAND_EXEC" -a -n "$PAND_OPTIONS" ]; then
stat_append " $PAND_NAME"
$PAND_EXEC $PAND_OPTIONS
fi
add_daemon bluetooth
stat_done
stop)
stat_busy "Stopping bluetooth subsystem:"
stat_append " $PAND_NAME"
killall $PAND_NAME >/dev/null 2>&1
stat_append " $DUND_NAME"
killall $DUND_NAME >/dev/null 2>&1
if [ -x "$RFCOMM_EXEC" ]; then
stat_append " $RFCOMM_NAME"
$RFCOMM_EXEC release all >/dev/null 2>&1
fi
stat_append " $HIDD_NAME"
killall $HIDD_NAME >/dev/null 2>&1
stat_append " $SDPD_NAME"
killall $SDPD_NAME >/dev/null 2>&1
stat_append " $DAEMON_NAME"
killall $DAEMON_NAME >/dev/null 2>&1
rm_daemon bluetooth
stat_done
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
Here goes the /etc/conf.d/bluetooth file
# Bluetooth configuraton file
# Bluetooth services (allowed values are "true" and "false")
# Run the bluetoothd daemon (default: true)
#DAEMON_ENABLE="false"
# Run the sdp daemon (default: false)
# If this is disabled, hcid's internal sdp daemon will be used
#SDPD_ENABLE="true"
# Run the bluetooth HID daemon (default: false)
HIDD_ENABLE="true"
# Activate rfcomm ports (default: false)
RFCOMM_ENABLE="true"
# Run bluetooth dial-up networking daemon (default: false)
DUND_ENABLE="true"
# Run bluetooth PAN daemon (default: false)
PAND_ENABLE="true"
# rfcomm configuration file (default: /etc/bluetooth/rfcomm.conf)
#RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
# Options for hidd, dund and pand (default: none)
#HIDD_OPTIONS=""
#DUND_OPTIONS=""
#PAND_OPTIONS=""
DAEMON_ENABLE="true"
HID2HCI_ENABLE="true"
The output of lsusb | grep -i bluetooth
Bus 003 Device 014: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Output of dmesg | grep -i bluetooth
Bluetooth: Core ver 2.15
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: Generic Bluetooth USB driver ver 0.6
any help regarding the problem is highly appreciated.
[Edit] I tried doing /lib/udev/hid2hci(weird location i guess), but its asking me to enter sys device path which I've absolutely no idea of.
Last edited by pratik_narain (2010-07-23 03:54:49)

Bumping in hope for a reply

Dell Inspiron E1705 Graphics Driver Problems

Hello,
I have a Dell Inspiron E1705 which I am having major graphics driver problems with playing World of Warcraft. I used to play the game quite a while back and got back into it recently but i had to reset my computer one day and when I downloaded the game again the screen flashed black then gray over and over again and there was nothing I could do to exit this other then manually shutting off the laptop. I had this problem a few years back but somehow the game became compatible. Basically, I am thinking about buying a completely new graphics card for this computer but I am wondering which cards are compatible and if this will fix the problem. The Inspiron had vista on it but i acquired Windows 7 Ultimate 32 bit after i had heard that this may fix the problem. I am getting a new computer in three or four months so I don't want to spend hundreds of dollars hoping for less than a hundred. I will post the computer specs below:
Windows 7 Ulitmate 32 bit
2 gigs ram
100gigs rom
I believe the graphics driver is - Intel 945GM Graphics Controller
Thanks,
Matt

TheLexMachine wrote:
ossaya wrote:
Hello,
I have a Dell Inspiron E1705 which I am having major graphics driver problems with playing World of Warcraft. I used to play the game quite a while back and got back into it recently but i had to reset my computer one day and when I downloaded the game again the screen flashed black then gray over and over again and there was nothing I could do to exit this other then manually shutting off the laptop. I had this problem a few years back but somehow the game became compatible. Basically, I am thinking about buying a completely new graphics card for this computer but I am wondering which cards are compatible and if this will fix the problem. The Inspiron had vista on it but i acquired Windows 7 Ultimate 32 bit after i had heard that this may fix the problem. I am getting a new computer in three or four months so I don't want to spend hundreds of dollars hoping for less than a hundred. I will post the computer specs below:
Windows 7 Ulitmate 32 bit
2 gigs ram
100gigs rom
I believe the graphics driver is - Intel 945GM Graphics Controller
Thanks,
Matt
That laptop is not going to get the job done with the latest version of WoW. The machine isn't good for anything other than basic Internet browsing and word processing by today's standards so just save up as much money as you can and buy a better laptop in a few months.
I'd clarify - that specific model of E1705. E1705s were available with discrete graphics, those will still make the grade for WoW. (I have an E1705 with discrete graphics.)
E1705s with discrete graphics and E1705s with integrated graphics used different motherboards - no way to upgrade from integrated to discrete. There were some limited discrete-to-discrete upgrade options (such as the 7900GTX from that generation's XPS machines), but these were rarely economical.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Ipod to Dell Inspiron 6400 problems

Hello
I am trying to connect my 4th gen Ipod to my new Dell Inspiron 6400 laptop and connecting it just makes the pc become very slow. If i wait long enough (an hour or so) it'll come up with Itunes which says the ipod needs formatting, but then crashes as it loads the ipod updater. The Ipod will still work with my old desktop but i want to transfer it to the laptop.
Does anyone know why this is happening? I spoke with Dell and they said i needed to get a fix from Apple, but i can't seem to find anything on the website.
Any help would be appreciated
Mark

Did you read this wiki article?
http://wiki.archlinux.org/index.php/Max … erformance
Not specific to your machine, but contains some general hints.

Problem setting up LSM303DLH Accelerometer on a Dell Inspiron 1090

Hi, I'm trying to set up the accelerometer for a Dell Inspiron Duo. According to this website: http://lukeross.name/dell/, the accelerometer is an LSM303DLH made my STMicroelectronics (there are even some instructions to make it work). It seems that there are two drivers available:
- One at lklm.org https://lkml.org/lkml/2010/12/1/3, that according to the previous website should be patched with this http://lukeross.name/dell/lukeross-fixe … dlh_a.diff
- and another at a cached version of the manufacturers website http://webcache.googleusercontent.com/s … en&ct=clnk (this is supposed to be newer)
I've succeded to build the module using both drivers with this Makefile:
obj-m += lsm303dlh_a.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
where one changes lsm303dlh_a.o to lsm303dlh_acc_sysfs.o to keep the name conventions of each driver.
Then when I load the first one (lsm303dlh_a) i get the following output from dmesg:
[ 91.231412] i2c i2c-2: new_device: Instantiated device lsm303dlh_a at 0x19
[ 97.868807] i2c i2c-2: Failed to register i2c client lsm303dlh_a at 0x19 (-16)
And this is dmesg output for the second (lsm303dlh_acc_sysfs):
[ 124.908804] lsm303dlh_acc_sysfs accelerometer driver: init
[ 124.908876] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
[ 124.908885] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
So far (with the second driver), everything looks OK. But when I try to instantiate the device with this command
# echo lsm303dlh_acc_sysfs 25 > /sys/bus/i2c/devices/i2c-2/new_device
I get this output from dmesg
[ 833.274769] lsm303dlh_acc_sysfs: probe start.
[ 833.274781] lsm303dlh_acc_sysfs 2-0019: platform data is NULL. exiting.
[ 833.274790] lsm303dlh_acc_sysfs: Driver Init failed
[ 833.274813] i2c i2c-2: new_device: Instantiated device lsm303dlh_acc_sysfs at 0x19
Then, I cannot do enable the device with
echo 1 > /sys/bus/i2c/devices/i2c-2/2-0019/mode
as there is no file "mode" in this directory. An thus no file data to read the accelerometer's output with
cat sys/bus/i2c/devices/i2c-2/2-0019/data
Any ideas? Thanks.

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Problem connecting Dell Inspiron 6000 to internet via Time Capsule.

Hi,
Unable to connect Dell Inspiron 6000 to internet via Time Capsule.
I get this "Windows is unable to connect to selected network. Network may no longer be in range". Any clue?
Thanks.

What modem do you have?
Is it a router? What mode is the TC being setup in, bridge or router?
Is it cable modem? If so did you power cycle the modem for the required time.. it might be 30min or just 5min or many hours depending on the ISP.
Tell us more.
For mavericks please ensure your network connections have ipv6 set correctly.. ie link-local.

Dell Inspiron 1520 - disk problem

Similar Messages

Maybe you are looking for