Dell Inspiron 5547 laptop touch pad issue

I have Dell inspiron 5547 laptop. I have touch pad issue. Touch pad is looks it's working but It's not working properly. I can't click on file or any where else. I call dell for support they first uninstall all drivers for Touch pad and re install it. After that it works goods for 2-3 days and once again problem is same.
After that I call once again dell support and they send technician to my house to change touch pad after he change, in few days problem is same.
After that I send my laptop to support center and after getting system back I have same issue.
so I call once more times and they send technician to change hard drive with inbuilt OS. After that In just 2 days I have same problem. Now I request dell to replace my system and I am waiting for their approval But If any One have Any solution then please Reply me
Thank you

Hi Raj7108,
I would advise you to download and install the ‘TouchFreeze’ software from the link below and check for issue resolution.
http://bit.ly/oS0Hd
Please let me know if this helps.

Similar Messages

Dell Inspiron 1300 laptop wont connect to router anymore

Eveything was great untl I had to change the encryption code on the router, now I cant get the laptop to connect to the router anymore. Nothing was changed on the computer and the only thing that was changed on the router was the encryption code. The Dell laptop has a 1370 mini wireless card in it running windows XP, and I updated it last night to the latest driver. My Dell Inspiron 1525 laptop has no problem connecting to it. The wireless router is a WRT54GS. I have also started wireless zero configuration and checked the box to let windows control my wireless. And the box in properties that says "Enable IEEE 802.1authentication for this network" is not checked.
Sometimes when I try to connect it, it will say connected when it isnt connected to anything. Other times when I try to connect it will connect to another wireless internet in the neighborhood that doesnt have any encryption. And then other times I get the message that says "windows was unable to find a certificate to log you on to the network". I got it to connect when I took the the encryption off the router but for some reason it doesnt want to connect with encryption on it. I am using WEP 64bit. I checked all the settings on both the laptops and the wireless settings are exactly the same. I dont understand why mine will connect and the other one wont. Any ideas?

You can try manually adding the network on your computer, Also change the SSID on the router if it is linksys(default).
To add the network manually try the below mentioned settings.......
Click on Start and go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection disable it and then Re-enable it .
Right click on Wireless Network Connection and click on Properties,Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/security key, make sure you enter the correct network key and confirm it...
It will connect...
That should resolve the issue for you.

I currently have a DELL Inspiron E1707 Laptop and I conne...

I currently have a DELL Inspiron E1707 Laptop and I connect to the internet via my Linksys WRT54GS Wireless Router. For the past 2 days I can connect to the internet but sites take forever to load or just don't load at all. I went to Intel PRO/set Wireless Troubleshooter and the event viewer says: CTA Plugin is not installed or supported. I have googled this problem and still have not found a solution or where I can install the plugin. I did find that this is somewhat common and has to do with the CISCO system/Linksys Router. I hope one of your specialists has a solution to this problem. Please get back to me regarding this issue. Thank You!

Change the wireless channel from 6 to 9 ...
Also under advanced wireless settings you can change few more settings ....
Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings"....

My Pavilion g series laptop touch pad keeps freezing

Hi
My Pavilion g series laptop touch pad keeps freezing - it will release again when I press the 'escape' key'
Thank you for your help

Hello @CamberK,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook's touchpad keeps freezing, and I would be happy to assist you!
To return the functionality back to your touchpad, I recommend following the steps in this document on Using and Configuring the TouchPad (Windows 7 and Vista). This should help prevent your touchpad from locking up in the future.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I'm unable to scroll down the page using laptop touch pad.

My FF was updated automatically. I'm unable to scroll down the page using the laptop touch pad scroll option.
It was working fine on FF before upgrade and after upgrade on IE browser. But, in FF 9 it is not working. Any help is appreciated.

Type '''about:config''' in the address bar and hit Enter key. When you see a warning, click '''I'll be careful, I promise!''' button
-> In the '''Filter bar''', type '''trackpoint'''
* right-click '''ui.trackpoint_hack.enabled''' preference, click '''Modify''' and change the value from '''-1''' to '''0''' (zero) or '''1'''
* click OK
-> Close '''about:config''' tab and Restart Firefox
Check which value (0 or 1) works.
Not related to your problem but do the following:
-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
-> Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

HP ELite L2201x and Dell Inspiron 1525 laptop?

Hi, I bought an HP Elite L2201x Monitor, and I want to connect it to my Dell Inspiron 1525 laptop.
I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
Any advice? I thought about using the port I use to conect to a proyector, but idk if that makes sense at all!
Thanks for your help!!!

>I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
display port and HDMI are two completely different solutions.
Also a display port source can deliver hdmi signals (so this way the cable will work), a hdmi source often (always?) can't support dp signals.
This is how I understand this FAQ:
From http://www.displayport.org/faq/;
Q: I am the owner of a new 27″ iMac, which I was planning to use as a high- resolution display for an HDMI equipped Blu-Ray player. I have purchased the DP-to-HDMI adaptor after being advised by Apple technical that it would function as an input, but having tried it, discovered that the device will only OUTPUT. My question is, why won’t the adaptor pass signal the other way, and what is the adaptor doing if it’s not powered, and it’s tiny, that it can’t do backwards?
A: DisplayPort-to-HDMI adaptors and DisplayPort-to-DVI adapters are very simple and only operate one way. For instance, when a DP-to-HDMI adaptor is connected to a PC that supports DP++ (multimode) capability, the PC senses the presence of the adaptor and sends HDMI signals over the DisplayPort connector rather than DisplayPort signals. No signal conversion is performed by the HDM adaptor. HDMI signals are merely passed through. The unique DisplayPort adaptor capability enables the PC to connect to a variety of displays via the DisplayPort connector including HDMI, DVI, and VGA. VGA adaptors are more complex and perform active signal conversion from DisplayPort to VGA. These adaptors also operate only one way. Unfortunately, HDMI does not support conversion to other display formats as does DisplayPort.
HTH
V.
*** Say 'Thanks' with Kudos ***

Strange bluetooth problem dell inspiron 1545 laptop

Hello friends, I've got a full working install of arch on my dell inspiron 1545 laptop. At first, bluetooth was working with the blueman-applet. After an upgrade to bluez(i suppose), it suddenly stopped working. The laptop bluetooth is on, the device is discoverable, it even successfully recognizes the phone I'm trying to pair. But earlier, it was showing the phones name but now it only shows the mac address in blueman and in "hcitool scan" output, it shows:
hcitool scan
Scanning ...
00:1B:EE:16:63:5E n/a
I've got the following bluetooth services running:
bluetoothd hidd rfcomm
Here my /etc/rc.d/bluetooth file:
#!/bin/bash
# Start/stop the Bluetooth daemons
. /etc/rc.conf
. /etc/rc.d/functions
DAEMON_NAME="bluetoothd"
HIDD_NAME="hidd"
RFCOMM_NAME="rfcomm"
PAND_NAME="pand"
DUND_NAME="dund"
DAEMON_EXEC="/usr/sbin/bluetoothd"
HIDD_EXEC="/usr/bin/hidd"
RFCOMM_EXEC="/usr/bin/rfcomm"
PAND_EXEC="/usr/bin/pand"
DUND_EXEC="/usr/bin/dund"
DAEMON_ENABLE="true"
HIDD_ENABLE="false"
RFCOMM_ENABLE="false"
DUND_ENABLE="false"
PAND_ENABLE="false"
RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
HIDD_OPTIONS=""
DUND_OPTIONS=""
PAND_OPTIONS=""
[ -f /etc/conf.d/bluetooth ] && . /etc/conf.d/bluetooth
case "$1" in
start)
stat_busy "Starting bluetooth subsystem:"
if [ "$DAEMON_ENABLE" = "true" -a -x "$DAEMON_EXEC" ] ; then
stat_append " $DAEMON_NAME"
$DAEMON_EXEC
sleep 1
fi
if [ "$SDPD_ENABLE" = "true" -a -x "$SDPD_EXEC" ] ; then
stat_append " $SDPD_NAME"
$SDPD_EXEC
fi
if [ "$HIDD_ENABLE" = "true" -a -x "$HIDD_EXEC" ]; then
stat_append " $HIDD_NAME"
$HIDD_EXEC $HIDD_OPTIONS --server
fi
if [ "$RFCOMM_ENABLE" = "true" -a -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ]; then
stat_append " $RFCOMM_NAME"
$RFCOMM_EXEC -f $RFCOMM_CONFIG bind all
fi
if [ "$DUND_ENABLE" = "true" -a -x "$DUND_EXEC" -a -n "$DUND_OPTIONS" ]; then
stat_append " $DUND_NAME"
$DUND_EXEC $DUND_OPTIONS
fi
if [ "$PAND_ENABLE" = "true" -a -x "$PAND_EXEC" -a -n "$PAND_OPTIONS" ]; then
stat_append " $PAND_NAME"
$PAND_EXEC $PAND_OPTIONS
fi
add_daemon bluetooth
stat_done
stop)
stat_busy "Stopping bluetooth subsystem:"
stat_append " $PAND_NAME"
killall $PAND_NAME >/dev/null 2>&1
stat_append " $DUND_NAME"
killall $DUND_NAME >/dev/null 2>&1
if [ -x "$RFCOMM_EXEC" ]; then
stat_append " $RFCOMM_NAME"
$RFCOMM_EXEC release all >/dev/null 2>&1
fi
stat_append " $HIDD_NAME"
killall $HIDD_NAME >/dev/null 2>&1
stat_append " $SDPD_NAME"
killall $SDPD_NAME >/dev/null 2>&1
stat_append " $DAEMON_NAME"
killall $DAEMON_NAME >/dev/null 2>&1
rm_daemon bluetooth
stat_done
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
Here goes the /etc/conf.d/bluetooth file
# Bluetooth configuraton file
# Bluetooth services (allowed values are "true" and "false")
# Run the bluetoothd daemon (default: true)
#DAEMON_ENABLE="false"
# Run the sdp daemon (default: false)
# If this is disabled, hcid's internal sdp daemon will be used
#SDPD_ENABLE="true"
# Run the bluetooth HID daemon (default: false)
HIDD_ENABLE="true"
# Activate rfcomm ports (default: false)
RFCOMM_ENABLE="true"
# Run bluetooth dial-up networking daemon (default: false)
DUND_ENABLE="true"
# Run bluetooth PAN daemon (default: false)
PAND_ENABLE="true"
# rfcomm configuration file (default: /etc/bluetooth/rfcomm.conf)
#RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
# Options for hidd, dund and pand (default: none)
#HIDD_OPTIONS=""
#DUND_OPTIONS=""
#PAND_OPTIONS=""
DAEMON_ENABLE="true"
HID2HCI_ENABLE="true"
The output of lsusb | grep -i bluetooth
Bus 003 Device 014: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Output of dmesg | grep -i bluetooth
Bluetooth: Core ver 2.15
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: Generic Bluetooth USB driver ver 0.6
any help regarding the problem is highly appreciated.
[Edit] I tried doing /lib/udev/hid2hci(weird location i guess), but its asking me to enter sys device path which I've absolutely no idea of.
Last edited by pratik_narain (2010-07-23 03:54:49)

Bumping in hope for a reply

After updating to Firefox 7, i've lost scrolling feature on my laptop touch pad

After I updated to Firefox 7, the scrolling feature on the laptop touch pad would not work. My OS is Windows 7. I also updated my other laptop and the same thing happened. That one has Windows Vista as it's OS

Try to modify the pref ui.trackpoint_hack.enabled on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

G570 laptop touch pad

I don't know if I'm in the right place. What do they mean by' think' and' idea' topics?
Anyway, I've had problems with my touch pad since I got my laptop. I've tried installing new drivers several times. Each time it works for awhile then the same problems return.
For example, as I am typing this even though I'm staying away from the touchpad, the 'right click' menu keeps opening. but there are many other weird things happening.
The last time I installed the new driver, my laptop completely froze up and I had turn my laptop off and it did not fix anything. in fact it seems like my keyboard is being weird too.
This is getting very old. Isn't there a permanent fix for this problem?

hi maryannebeau,
Welcome to the Lenovo Community.
If you're navigating around and suddenly you get a right click context menu suddenly pops-up without doing a physical right click, try to do the following:
1. Uninstall the Synaptics / Elantech touchpad driver under Start > Control Panel > Programs > Uninstall a Program and restart the PC (this will use the built-in Microsoft Touchpad Driver)
2. After the reboot, open Device Manager (click Start > type Device Manager) and under Mice and Other Pointing Devices, make sure it's not set to Lenovo Pointing Device, otherwise uninstall the driver and reboot.
If the issue persists after using the microsoft touchpad driver, then the Touchpad / Touchpad Board and/or Touchpad cable needs to be replaced as there's a short between the said parts and you need to contact Lenovo for service. Support phone list here.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After installing fedora in my laptop touch pad is not recognizing by OS

am having lenovo 3000 g430 , yesterday i installed fedora 7 in my laptop.
installation was successfull but the touch pad is not recognizing , is there any way to resolve this issue
thanks in advance

Kenz,
Here is the link for the touchpad driver for fedora
Have you tried to enable "gsynaptics touch"?
You will have a file called xorg.conf in the etc directory '/etc/X11/xorg.conf' .It should look something like this
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Add this section below the keyboard but above the video card:
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "SendCoreEvents"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
Option "Emulate3Buttons"
Option "VertTwoFingerScroll" "false"
Option "HorizTwoFingerScroll" "false"
Option "HorizScrollDelta" "0"
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
EndSection
and then add this to the server layout section just below the line for the keyboard:
InputDevice "TouchPad" "CorePointer"
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Dell Inspiron 7000 series dual monitor issue

Today tried to connect Dell Inspiron 7437 to external monitor using HDMI cord; it did not work. I changed setting to external monitor only and now cannot get an image on laptop screen or external monitor when HDMI cord is connected. Tried to restart computer; still goes to blank screen as soon as I plug in HDMI.
1. How to a return to default setting for laptop display so it's only set to laptop?
2. Is it possible to connect inspiron 7000 to external monitor with hdmi?
Thank you

Hello,
Yes, it is possible to connect the Inspiron 7000 series to an external monitor using an HDMI cable. Normally you can control how the video is displayed by using the <FN>+<F8> key combination. Normally your options are LCD only, duplicate display on the LCD & the external monitor, or just display on the external monitor (projector mode). Try that key combination to see if you can toggle between the available displays.
One thing you also might want to check to see is if that monitor is set to a resolution that your system cannot handle. Here is a link to the product support pages for the Inspiron 7437, and you will find user manuals on the page that will help explain which resolutions your video card can handle. You may need to set your monitor back to default settings (see your user manual for that monitor for details) and that should enable your system to send video to it.
Let me know if any of this helps or if you have additional questions.
Todd

Touch pad issues, please help.

HP Pavilion Notebook
Model: 15-n096sa
Product: F4T58EA#ABU
OS: Windows 8.1 Home Premium X64
I've installed Windows 8.1 Home Premium X64 on my notebook in the last week, it originally had version 8 installed when i bought it a month ago. Since upgrading the OS my touch pad no longer allows me to scroll with two fingers or magnify pages, use the right click function by tapping with two fingers & also bring up the options by sideswiping. All i am able to do now is move the pointer & click or double click with the pad.
Can somebody please help me to resolve this as it's driving me crazy ?
Thanks in advance.
This question was solved.
View Solution.

Hello EnergySyndicate,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with certain features of the Touchpad not working correctly. I believe this to be a settings issue. I am providing you with an HP Support document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8) which will walk you through how to adjust the settings and ensure that the common Touchpad gestures is correctly configured.
I believe this will resolve your Touchpad issue and let you get back to enjoying your computer. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hp dm4 laptop touch pad

please i want to off the movement from the button area on hp dm 4 touch pad
i checked in synaptics settings but i didnt find
that buttons were good instead of flat touch pad with no buttons its very hard to use as there is no separation between the buttons and the rest of touch pad.
now i want to move the movement from the buttons area so dat touchpad button area work only for click like other hp buttons

Any solution for this? I have the same issue.
No big complaints about the trackpad EXCEPT when I place the cursor where I want it and try to left click down (with my thumb) on the lower left section of the trackpad and this causes the cursor to move and miss the mark. Simple fix would be disabling movement on lower area (button area of trackpad under line) and reserve it just for clicking... but no such option is provided. Any way of achieving this? Please?

LAPTOP TOUCH PAD AND NUMERIC KEYBOARD

I want to turn off the touch pad and I want the numeric key pad to work.

Hi Trevor6050,
I would like to welcome you to the HP Support Forums!
I see that you would like to turn off your touch pad and turn on the numeric keypad. I can help you with both of these requests.
For the touch pad here is a YouTube video that will walk you right through turning off your touch pad. How to Disable the Laptop Touchpad in Windows 7
For the numeric keypad, here is a document for How to Use the Numeric Keypad on Your Laptop with very straight forward steps on how to enable your numeric keyboard.
I hope this information helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

Satellite laptop touch pad scroll function

Greetings, New to the site, new to any kind of forum. Looking for advise. I have a Satellite laptop L300, I don't have a mouse, I just use the touch pad. (this is a brand new PC to me) Every once and a while while moving my cursor on browser or email application, the the pointer turns into an up/down area and the screen auto scrolls. I'm not sure how I am turning this feature on, but I'd like to know how to disable it? Also, is there somewhere I can download an owners manual for this laptop?
Thanks in advance for any help.
Mark

I figured out how to disable the scroll function.
Buried in some settings...
Thanks.

Dell Inspiron 5547 laptop touch pad issue

Similar Messages

Maybe you are looking for