Dell Inspiron 6400

Hi, does anyone use archlinux on a dell inspiron 6400? Do you have any advice on how to speed up the boot, and configure the machine for best performance? Actually, i don't have any problem or so, just wondering howto increase my system perfomance and remove any kind of useless stuff to speed up my machine a bit

Did you read this wiki article?
http://wiki.archlinux.org/index.php/Max … erformance
Not specific to your machine, but contains some general hints.

Similar Messages

Problem facing installing Solaris 10 on Dell inspiron 6400.

Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
Saurabh

Hi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
     No Solaris Driver
     Multimedia
     Intel Corporation
     82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
     No Solaris Driver
     Network
     Intel Corporation
     PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
     Solaris 10 11/06
     Firewire
     Ricoh Co Ltd
     Unknown device
     hci1394
Note-1
     Note-1
     Network
     Broadcom Corporation
     BCM4401-B0 100Base-TX
     bfe
Solaris 10 11/06
     Solaris 10 11/06
     Video
     Intel Corporation
     Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
     vgatext
Solaris 10 11/06
     Solaris 10 11/06
     Storage
     Intel Corporation
     82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
     pci-ide
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #1
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #2
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #3
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #4
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB2 EHCI Controller
     ehci

How do I wake up Dell Inspiron 6400 after closing the lid? [SOLVED]

I'm running Arch on a Dell Inspiron 6400 laptop (same as Inspiron e1505). When I close the top to an angle of less than about 30 degrees, the machine goes into some kind of sleep state and Arch is suspended (black screen, no response to anything). It may be easy to wake up Windows from such a condition but what must I do get Arch back and working, short of having to reboot?
Last edited by RobF (2007-07-05 20:08:41)

thayer.w wrote:
RobF, it's hard to say, without knowing what your setup is... GNOME, KDE? Any power management software installed such as Powersaved or hibernation scripts?
If you're still having troubles with it, check out the Inspiron 6400 wiki I've been working on. It includes step-by-step instructions on setting up hibernation/suspend features and I can verify it works on my own 6400.
http://wiki.archlinux.org/index.php/Dell_Inspiron_6400
I'm using KDE, and I haven't specifically installed any power management software aside from what came with the Arch base install and KDE.
I went through your Dell Inspiron 6400 Wiki (great work! I'll add to it) and installed acpid and powersave and hoped to install kpowersave or kpowersave-devel but neither of these will compile. kpowersave requires unsermake-svn but unsermake-svn will not compile because of the error: "unsermake-svn is not available for the 'i686' architecture," and: "Note that many packages may need a line added to their PKGBUILD such as arch=('i686')." So much about that.
Trying to build the package kpowersave-devel also aborts with the error:
Checking for Qt... configure: error: Qt (>= Qt 3.2 and < 4.0) (headers an ..... r installation!
For more details about this problem, look at the end of config.log.
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
So much about that.
About kpowersave-devel, srabd commented a month ago: "It doesn't compile now, but compiles if you use unsermake instead of make in the two final lines." Wonderful! But as I reported above, "unsermake-svn is not available for the 'i686' architecture."
I seem to be stuck. Any ideas how I can get around this?
Robert

[Solved]No Ethernet or Wireless to work on Dell Inspiron 6400 E1505.

The Dell Inspiron 6400 E1505 wiki says ethernet should work out of box. It is not. I am trying to install wireless drivers. I checked fw-cutter during installation but i guess i have to install broadcom-wl along with it. Make command is not found (probably not installed) How can get ethernet connection to work?
Thanks.
Last edited by donniezazen (2011-12-23 04:04:52)

Gusar wrote:We need more info about what kind of hardware is in that thing. So post the output of lscpi -nn
Sorry about that.
lspci -vnn | grep 14e4
Ethernet - Broadcom BCM4401-B0 100Base-TX [14e4:170c]
Network - Broadcom BCM4311 802.11b/g WLAN [14e4:4311]
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)

Ipod to Dell Inspiron 6400 problems

Hello
I am trying to connect my 4th gen Ipod to my new Dell Inspiron 6400 laptop and connecting it just makes the pc become very slow. If i wait long enough (an hour or so) it'll come up with Itunes which says the ipod needs formatting, but then crashes as it loads the ipod updater. The Ipod will still work with my old desktop but i want to transfer it to the laptop.
Does anyone know why this is happening? I spoke with Dell and they said i needed to get a fix from Apple, but i can't seem to find anything on the website.
Any help would be appreciated
Mark

Did you read this wiki article?
http://wiki.archlinux.org/index.php/Max … erformance
Not specific to your machine, but contains some general hints.

Unable to start X on dell inspiron 6400

Hello Guys,
I'm new to Arch, been using Linux for the last couple of years. But finding it hard to getting X to start.
.xinitrc - http://paste.pocoo.org/show/214610
xorg.conf - http://paste.pocoo.org/show/214611
xorg.0.log - http://paste.pocoo.org/show/214612
xorf.0.log.old - http://paste.pocoo.org/show/214613
I get the error message, error setting MTRR inappropriate icotl for device.
I hope this is enough information to help me fix the issue.
Thanks!
Last edited by nperry (2010-05-16 14:45:43)

nperry wrote:
Tried without Xorg, it fails to.
The graphic card in the laptop is ATI Mobility x1300
I have a laptop with an ATI Radeon HD 5730 and had a lot of trouble to get it working.
I suggest you start by reading the wiki at:
http://wiki.archlinux.org/index.php/Ati
Mektub

Installation on a DELL Inspiron 6400 Laptop - PROBLEMS!!!!

Hi All,
I'm a newbie to Solaris 10 and decided to install the OS on my laptop with XP, OpenSUSE 11, Open Solaris and finally Solaris 10. When i have finished the complete installation, Solaris will re-start and i select Solaris 10 and eventually i get a sendmail error message, which i Ignore and i wait for the desktop login screen to appear before i log in. However, im constantly waiting and nothing happens and there is no GUI and its just hangs. Is anyone experiencing this problem and if they have managed to fix this i would very much appreciate all the help i can get!!
Regards,
Sunil

I found this website very helpful while I was installing my Solaris software and encountered some problems. You can also check it out in here. http://docs.sun.com/app/docs/doc/817-0544
Liza

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

Try the offline installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
For Adobe Reader: http://get.adobe.com/reader/enterprise/

[SOLVED] Function Keys Problem On Dell Inspiron N5010

Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)

xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

Solaris 8 & Keyboard Problem on DELL Inspiron Laptop

Hi all,
Trying to install Solaris 8 on Dell Inspiron 4000 laptop, but the keyboard gets stuck at the stage where I need to select the language. No response to keyboard and the machine just hangs. The keyboard works initially, I used the F2 key to continue to the next screen. Has anyone seen this before? Any help is much appreciated.
Thanks
[email protected]

I'm experiencing this exact problem on my Dell Inspiron 4000 as well. When I trying to select the Language stage of the installation, my laptop responds with garble text, and then the laptop locks up. Please let me know if you have a resolution.
vinh
[email protected]

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Dell Inspiron 11 3000 series

I have an acer aspire one that has been trucking along for nearly 6 years now with almost continuous use (about a year of non-use time in there, but that's it). I use it primarily for taking notes in class and such, but it also sees a lot of programming and other use since I take it to campus each day and also on trips. In this time, I have lost almost all the feet and now screws are slowly disappearing. It also has started to have some overheating issues when the heatsink seems to shift positions slightly (it shuts off within 90 seconds when this happens). In addition, I find myself wishing quite often that it could do things like stream video properly (without jittering) and compile the kernel (it takes FOREVER on that tiny hyper threaded single core atom processor). So, I've been looking at a replacement that can get similar battery life, has a similarly sized screen (preferably touch as well because I think that would be great fun to use), more than 1Gb of RAM (I can have about 7 tabs open on chrome and then it starts having troubles since I have swap disabled), and a better processor. My most basic requirement, however, is that the laptop be able to run arch.
I've been looking at the Dell Inspiron 11 3000 series since it seems to have the best battery life of my various 11.6" options out there. The processor is a dual core Celeron which sounds old and antiquated to me, even though I believe its based on Haswell (not sure there). It also has 4Gb RAM and 500Gb hard drive. Another option, for $50 more, is a pentium processor which sounds even more antiquated, but is still based on Haswell.
http://www.dell.com/us/p/inspiron-11-31 … redir=true
My question is this: Has anyone managed to get arch working on one of these things? I also imagine that the most new-fangled component would be the touchscreen, so does anyone know the general support of those for linux?
Thanks in advance for any help.

Hi,
Does the WPF application develop by yourself? Please make sure that your application has no dependency issue, if your WPF application lacks of some libs or .Net framework, it cannot execute. Do you get any error message when you try to run it?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dell Inspiron 1525 Problems

Hello.
I just purchased a Dell Inspiron 1525 with Vista Home Premium preinstalled. I wanted to know if there is a way to install a fully working Arch Linux system on it. I tried with 2007.08 CD only to fail at getting the wireless card to work. Dell Inspiron 1525 comes with a Dell Wireless 1390 WLAN Mini Card. I tried installing both the latest vista and xp drivers for this card via ndiswrapper. I thought all was well since I got the message that said that the driver is installed and the device was present. However, when I checked iwconfig, the normal 'wlan0' was not in the list, just 'lo'. Can someone help me with this?
Also, I used a ZenWalk liveCD to test out if I have sound support. It seems like the sound doesn't work either, but that may be because I used an old liveCD. The 1525 comes with a 'SIGMATEL STAC 92XX C-MAJOR HD Audio' or also known as "High Definition Audio 2.0".
I have also learned that although Dell does offer this laptop with Ubuntu installed, they changed the wireless card on the ubuntu version. I don't know if that means anything. Also, I have heard of many who have gotten linux installed on this laptop. I have some experience with linux, but all of that is with a desktop pc. (Used Arch for the longest after trying out Gentoo ^^)
I checked the Ubuntu forums on this matter, and they seem to have a lot of documentation on it, but I am unsure if it will apply to Arch. Does Arch come with the bcm43xx drivers? If it does, then that means I have to blacklist it or something. I really need help.
- Dennis ^^
PS: Thanks in advance for any help!

Thanks for all of the replies. I downloaded the newest ISO and tried to get it working again. Well, b43 did not really work as I hoped it would, so I went and used ndiswrapper. To my astonishment, it works. Apparantly, something changed from the 2.6.22 to 2.6.24 kernels that made it so that the ndiswrapper module won't be detected with a broadcom card with the 2.6.22 kernel. This is all a guess, but it kinda makes sense. Only one problem though, I did all of the usual steps to set up the wireless connection... and it can't seem to connect to the internet... I did:
iwconfig wlan0 essid ********
iwconfig wlan0 mode Managed
iwconfig wlan0 key restricted **********
ifconfig wlan0 up
dhcpcd wlan0
*I have tried this with other network cards, those on my desktop, and they worked fine.
When I do 'iwlist wlan0 scanning' , I detect all the networks that I expected to see, but it doesn't connect to any of them, which I think is really weird.
I don't really care much for vista, but I miss messing around with a decent CLI, and I will be majoring in Computer Science once I get into college, which would definately include classes on Bash scripting, so I wanted to get a linux install on my laptop since my desktop died. I have experience with Ubuntu, Gentoo (Stage 1 and Stage 3 installs.. Stage 1 was a giant pain and failed the first 4 times), ZenWalk, MEPIS, SuSE, Fedora, Arch, and some others. Of all of these, I liked Arch the best. So, I was really hoping I could get it installed.
Well, it seems I will be stuck with vista for a while... but I must say, it's not AS bad as I thought it would... still slow and all though ^^
@anti-neutrino:
Hello. Dual-booting is tricky stuff in my opinion. I have never done it myself, so I can't really help you there. But, there are plenty of documentation out there on it. According to http://www.goodells.net/dellrestore/mediadirect.htm, DellMediaDirect is installed on a hidden partition. So, I'm guessing that as long as you don't touch that partition, it would still be there. What I think you would have problem with is where to put grub (or lilo). The safest thing to do, I would think, is to place it in a floppy, if you have an external floppy drive, or place grub into a USB Flash drive which you would be able to boot from. I have no idea how to do this in Arch, but I have done it before in SuSE. And as for Vista, as long as you don't touch the vista partition, it should stay the same. The booting is the only problem I can see for you. If the boot loader (grub or lilo) is installed in a separate medium (floppy/USB) then to boot into the linux partition, all you would have to do is boot from the medium, eitherwise, it would boot into Vista (or whatever you have that boots up first) automatically.. that is unless they changed something, and knowing how fast linux is developed, there are a lot of changes, so I'm not really sure if it still works this way.
@Warper:
I don't really mind the sound right now. If I can get internet to work, I know I can solve all the other problems later, as all I need to do is look up how to solve for it. But, yeah I know sound is muted by default in Arch. It's just that with my desktop, sound was automatically detected by other LiveCD's that I was confused when those same LiveCD's couldn't detect it. Again, this might just be that the LiveCD's use an older kernel.
- Dennis ^^
PS: I reinstalled vista and wrote this post in it. T_T
Last edited by skittlehawk (2008-06-06 23:30:16)

Dell Inspiron 14R WLAN Card Disabled

Hello,
I have a Dell Inspiron 14R running Windows 7 64 bit. I have had my PC from this past November; about 7 months.
I was using my PC, and suddenly, I started to experience wireless problems. I was unable to get onto the internet. Other devices on my wireless network are able to log on to our network, although that is irrelevant because my radio wasn't picking up anything at all, when it always had from that same location. The connection worked fine using an ethernet cable. After the problem occurred, my Targus Bluetooth mouse also stopped working. This is what I have tried:
Going into Network and Sharing Center, disabling my network adapter, and then enabling it again. This usually does the trick. After doing it over 5 times, it never worked.
Doing a simple system restore. I attempted restoring 3 different times to an update within the last week, each of which failed (probably another issue altogether).
Re-installing my WLAN CARD Driver, and then restarting. This didn't solve the problem.
Checking the Device Manager. It reported that the wireless card was running properly.
Using the DW WLAN CARD Utility. It says under the Link Status tab, after Connection Status, Radio Disabled. I tried right-clicking the icon in my Notification Area, and then clicking Enable Radio. It then shows an alert saying "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it." Pressing Fn + F2, which is also supposed to enable the radio, did nothing, with no action or sign whatsoever from Windows. I also tried running tests under the Diagnostics tab. All hardware tests passed, with the Connection test giving me this alert again: "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it," and then failing. The same thing happened when running the CCX Client diagnostics.
What should I do? The problem is obvious that my card is disabled, as all signs point to that. Does anyone have any ideas on how I could fix it? I've tried everything I know, not to mention countless Google searches.
Thanks!

I am experiencing the same issue with my Inspiron N4010. The network card has disappeared from the system devices. After a reboot, the network connected for about 15 seconds and then went away. I had the system devices displayed at the same time and the network card also disappeared when the network went down. The card worked fine until today. What is the cheapest route to fix this?
Also note the sound has come and gone over the past year. It is not working at the moment. It would be nice to fix both, but will the cost be greater than buying a new laptop or tablet?
I can't say I will ever buy a Dell product again. These laptops seem to only last a year or two. Even my more expensive work laptop which is less than a year old has had its motherboard and hard drive replaced.

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Dell Inspiron 6400

Similar Messages

Maybe you are looking for