Dell Inspiron Mini

I have a Dell Inspiron Mini computer and I want to do a manufacture reset, but it keeps wanting me to do a system restore which I have picked the earliest date, but still run into the same issues. I have tried to talk to Dell numerous times, but
they keep telling me since my Dell Inspiron Mini (Windows 7 Starter) is out of warranty I would have to send my unit to their TX location for them to trouble shoot and repair, and then probably charge me some costly amount. I just want to set it back
to the Mfg default, but can't figure how.
Can anyone help me to get around this issue?
Thank you very much!!

Press F8 directly after powering up /booting the computer
Recovery instructions in detail:
http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
Call Dell Support but this time ask for "Recovery Media", typical cost is about $33.00 (includes shipping cost):
http://www.dell.com/support/home/us/en/19?c=&l=&s=
Or: http://www.dell.com/
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

Similar Messages

Can the deskjet 3940 be used with a dell inspiron mini laptop which has no cd compartment?

Hello ?
Really keen to purchase Deskjet but at moment only have the laptop named above to use with it.Is this possible as the set up CD does not go in it as no CD compartment ?

Hi - Try following the steps in the doc at this link. Once you follow the link, click on:
Install the Driver Using Windows Update with a USB Connection (Downloadable Driver Not Available) ►
The printer driver should already be in Win7 (I don't believe it will be any different for the mini laptop).
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

[SOLVED] Bios update fail: Dell Inspiron Mini 10 (1012) netbook

Hi everyone,
I updated the BIOS from its original firmware to A12 on this website
www.dell.com/.../DriversDetails
Unfortunately, it hang up at about Block 8/12. I waited for more than an hour and then turned it off. After that the laptop couldn't be turned on. I think I had bricked it
After searching on the web, I found some suggestions on mydellmini forum. I tried to use a USB drive to reflash the BIOS per this guide
www.mydellmini.com/.../28430-un-bricking-1012-a.html
However, no matter what key combination I tried (Fn + END or END or CTRL + END or Fn + B), the laptop did nothing. The light on the USB did come up but no flashing light, no beep-sound
Someone mentioned that they were successful only when using the USB Floppy Disk drive. I have bought the USB drive but the A12 firmware above is 4 MB and won't fit into a floppy disk
Anyone has the download link to the original system BIOS file that can fit into a Floppy Disk? I couldn't find it anywhere on the internet
Thank you very much in advance!
EDIT:
I finally got the netbook working again. These are the steps I did:
1. Got a 4 GB USB (instead of the 512 MB I used earlier), formatted it using FAT32 file system.
2. Used a PC/laptop running 32-bit Windows and plugged the USB stick in. Right click on WINCRIS.EXE file (download link below) and chose Run as Administrator. Run the program to create a recovery USB stick with the A12 version for DELL 1012. I have uploaded the folder I used on mediafire just in case someone would need it in the future.
http://www.mediafire.com/download/t7ei5facpdkxepa/BiosRecovery.7z
3. Remove the battery. Plugged it in the USB port on the right side of the netbook.
4. Held down the END key (near top right corner of the keyboard) then plugged in the power cable. The netbook turned on by itself. As soon as I heard the first beep, I let go the END key.
5. There was intermittent series of long beeps. After about 20mins, the laptop rebooted itself and asked me to remove the USB stick and press any key to continue.
6. That's it and everything is back to normal now :)
Thank you very much for your help everyone again!

I finally got the netbook working again. These are the steps I did
1. Got a 4 GB USB (instead of the 512 MB I used earlier), formatted it using FAT32 file system
2. Used a PC/laptop running 32-bit Windows and plugged the USB stick in. Right click on WINCRIS.EXE file (download link below) and chose Run as Administrator. Run the program to create a recovery USB stick with the A12 version for DELL 1012. I have uploaded the folder I used on mediafire just in case someone would need it in the future
www.mediafire.com/.../BiosRecovery.7z
3. Plugged it in the USB port on the right side of the netbook
4. Held down the END key (near top right corner of the keyboard) then plugged in the power cable. The netbook turned on by itself. As soon as I heard the first beep, I let go the END key
5. There was intermittent series of long beeps. After about 20mins, the laptop rebooted itself and asked me to remove the USB stick and press any key to continue
6. That's it and everything is back to normal now
Thank you very much for your help everyone again!

Computer: DELL Inspiron Mini 10 Printer: HP Officejet 4500 Wireless. Wireless printing problem

I am able to print through direct USB connection, but even though my wireless connection is working fine I have not succeeded printing in wireless mode. My computer uses Windows XP. I have another computer Sony Vaio with Windows 7 which cam print to this same printer in wireless mode. Any suggestions?

Hi urrut,
Here is a link to a post with directions on how to set up your Officejet 4500 wireless printer through wireless.
You will have to follow the thread as there are currently 22 posts but I think you will find the info helpful in getting yours set up through wireless.
Let us know if this helps.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Firefox 4 won't install properly. using Dell inspiron mini 32 bit, windows 7 home premium.

The only problem I see is setup doesn't close when I click finish.

The only problem I see is setup doesn't close when I click finish.

[SOLVED] Function Keys Problem On Dell Inspiron N5010

Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)

xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

Dell Inspiron 1525 Problems

Hello.
I just purchased a Dell Inspiron 1525 with Vista Home Premium preinstalled. I wanted to know if there is a way to install a fully working Arch Linux system on it. I tried with 2007.08 CD only to fail at getting the wireless card to work. Dell Inspiron 1525 comes with a Dell Wireless 1390 WLAN Mini Card. I tried installing both the latest vista and xp drivers for this card via ndiswrapper. I thought all was well since I got the message that said that the driver is installed and the device was present. However, when I checked iwconfig, the normal 'wlan0' was not in the list, just 'lo'. Can someone help me with this?
Also, I used a ZenWalk liveCD to test out if I have sound support. It seems like the sound doesn't work either, but that may be because I used an old liveCD. The 1525 comes with a 'SIGMATEL STAC 92XX C-MAJOR HD Audio' or also known as "High Definition Audio 2.0".
I have also learned that although Dell does offer this laptop with Ubuntu installed, they changed the wireless card on the ubuntu version. I don't know if that means anything. Also, I have heard of many who have gotten linux installed on this laptop. I have some experience with linux, but all of that is with a desktop pc. (Used Arch for the longest after trying out Gentoo ^^)
I checked the Ubuntu forums on this matter, and they seem to have a lot of documentation on it, but I am unsure if it will apply to Arch. Does Arch come with the bcm43xx drivers? If it does, then that means I have to blacklist it or something. I really need help.
- Dennis ^^
PS: Thanks in advance for any help!

Thanks for all of the replies. I downloaded the newest ISO and tried to get it working again. Well, b43 did not really work as I hoped it would, so I went and used ndiswrapper. To my astonishment, it works. Apparantly, something changed from the 2.6.22 to 2.6.24 kernels that made it so that the ndiswrapper module won't be detected with a broadcom card with the 2.6.22 kernel. This is all a guess, but it kinda makes sense. Only one problem though, I did all of the usual steps to set up the wireless connection... and it can't seem to connect to the internet... I did:
iwconfig wlan0 essid ********
iwconfig wlan0 mode Managed
iwconfig wlan0 key restricted **********
ifconfig wlan0 up
dhcpcd wlan0
*I have tried this with other network cards, those on my desktop, and they worked fine.
When I do 'iwlist wlan0 scanning' , I detect all the networks that I expected to see, but it doesn't connect to any of them, which I think is really weird.
I don't really care much for vista, but I miss messing around with a decent CLI, and I will be majoring in Computer Science once I get into college, which would definately include classes on Bash scripting, so I wanted to get a linux install on my laptop since my desktop died. I have experience with Ubuntu, Gentoo (Stage 1 and Stage 3 installs.. Stage 1 was a giant pain and failed the first 4 times), ZenWalk, MEPIS, SuSE, Fedora, Arch, and some others. Of all of these, I liked Arch the best. So, I was really hoping I could get it installed.
Well, it seems I will be stuck with vista for a while... but I must say, it's not AS bad as I thought it would... still slow and all though ^^
@anti-neutrino:
Hello. Dual-booting is tricky stuff in my opinion. I have never done it myself, so I can't really help you there. But, there are plenty of documentation out there on it. According to http://www.goodells.net/dellrestore/mediadirect.htm, DellMediaDirect is installed on a hidden partition. So, I'm guessing that as long as you don't touch that partition, it would still be there. What I think you would have problem with is where to put grub (or lilo). The safest thing to do, I would think, is to place it in a floppy, if you have an external floppy drive, or place grub into a USB Flash drive which you would be able to boot from. I have no idea how to do this in Arch, but I have done it before in SuSE. And as for Vista, as long as you don't touch the vista partition, it should stay the same. The booting is the only problem I can see for you. If the boot loader (grub or lilo) is installed in a separate medium (floppy/USB) then to boot into the linux partition, all you would have to do is boot from the medium, eitherwise, it would boot into Vista (or whatever you have that boots up first) automatically.. that is unless they changed something, and knowing how fast linux is developed, there are a lot of changes, so I'm not really sure if it still works this way.
@Warper:
I don't really mind the sound right now. If I can get internet to work, I know I can solve all the other problems later, as all I need to do is look up how to solve for it. But, yeah I know sound is muted by default in Arch. It's just that with my desktop, sound was automatically detected by other LiveCD's that I was confused when those same LiveCD's couldn't detect it. Again, this might just be that the LiveCD's use an older kernel.
- Dennis ^^
PS: I reinstalled vista and wrote this post in it. T_T
Last edited by skittlehawk (2008-06-06 23:30:16)

I'm looking at the dell Inspiron Desktop 4th Generation Intel Core i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400?

I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
Here are the specks on both:
Inspiron
Processor
4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
Operating System
Help Me Choose
Windows® 8.1 (64Bit) English
Memory2
8GB Dual Channel DDR3 1600MHz (4GBx2)
Hard Drive
1TB 7200 rpm SATA 6Gb/s Hard Drive
Video Card
NVIDIA® GeForce® 705 1GB DDR3
Ports
Front
(2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
Rear
Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
Media Card Reader
Integrated 8-in-1 Media Card Reader
(supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
Memory Slots
2 DIMM Slots
Chassis
Bluetooth
BT 4.0 via 1705 WLAN card
Chipset
Intel® H81 PCH
Power
300 Watt Power Supply
XPS 8700
Processor
4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
Operating System
Help Me Choose
Windows 8.1 (64Bit) English
Choose Options
Memory2
12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
Hard Drive
1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
Video Card
NVIDIA GeForce GTX 745 4GB DDR3
CPU Thermal
86W
Graphics Thermal
225W/150W/75W
Power
460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
Ports
Bays
Support for 4 HDD bays: including (3) 3.5” HDDs
–Capable of 1 SSD and 3 HDD configuration
Media Card Reader
19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
Slots
Memory Slots
4 DIMM

From my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
I hope this helps.

Dell Inspiron 1300 laptop wont connect to router anymore

Eveything was great untl I had to change the encryption code on the router, now I cant get the laptop to connect to the router anymore. Nothing was changed on the computer and the only thing that was changed on the router was the encryption code. The Dell laptop has a 1370 mini wireless card in it running windows XP, and I updated it last night to the latest driver. My Dell Inspiron 1525 laptop has no problem connecting to it. The wireless router is a WRT54GS. I have also started wireless zero configuration and checked the box to let windows control my wireless. And the box in properties that says "Enable IEEE 802.1authentication for this network" is not checked.
Sometimes when I try to connect it, it will say connected when it isnt connected to anything. Other times when I try to connect it will connect to another wireless internet in the neighborhood that doesnt have any encryption. And then other times I get the message that says "windows was unable to find a certificate to log you on to the network". I got it to connect when I took the the encryption off the router but for some reason it doesnt want to connect with encryption on it. I am using WEP 64bit. I checked all the settings on both the laptops and the wireless settings are exactly the same. I dont understand why mine will connect and the other one wont. Any ideas?

You can try manually adding the network on your computer, Also change the SSID on the router if it is linksys(default).
To add the network manually try the below mentioned settings.......
Click on Start and go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection disable it and then Re-enable it .
Right click on Wireless Network Connection and click on Properties,Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/security key, make sure you enter the correct network key and confirm it...
It will connect...
That should resolve the issue for you.

Dell Inspiron 1525 wireless issues.

After much frustration with the slowness on Vista, I decided to install Arch on my laptop (Dell Inspiron 1525)
I've been running Arch on my Desktop for about a year now and it's been a while since I've done a fresh install.
The problem is getting my wireless card to operate.
I've tried the wiki and the web and haven't had great results.
my wireless card is a Broadcom BCM4310. I first tried the b43 driver, but it doesn't support the 4310 (it does support the 4309 and 4311. I guess mine got skipped )
anyways, I then tried the ndiswrapper around the bcmwl5 driver. I followed the wiki to the letter to get this driver installed, but I am still not showing any wireless devices.
ifconfig -a shows my eth0 and lo.
ifconfig wlan0 up does nothing either.
I'm stumped.
any ideas?
cyrusm

take a look here: http://bbs.archlinux.org/viewtopic.php? … 29#p331429
don't forget that MOD_BLACKLIST is deprecated and you need to put ! in MODULES
Last edited by wonder (2008-07-09 09:16:22)

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

Try the offline installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
For Adobe Reader: http://get.adobe.com/reader/enterprise/

Solaris 8 & Keyboard Problem on DELL Inspiron Laptop

Hi all,
Trying to install Solaris 8 on Dell Inspiron 4000 laptop, but the keyboard gets stuck at the stage where I need to select the language. No response to keyboard and the machine just hangs. The keyboard works initially, I used the F2 key to continue to the next screen. Has anyone seen this before? Any help is much appreciated.
Thanks
[email protected]

I'm experiencing this exact problem on my Dell Inspiron 4000 as well. When I trying to select the Language stage of the installation, my laptop responds with garble text, and then the laptop locks up. Please let me know if you have a resolution.
vinh
[email protected]

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Dell Inspiron 11 3000 series

I have an acer aspire one that has been trucking along for nearly 6 years now with almost continuous use (about a year of non-use time in there, but that's it). I use it primarily for taking notes in class and such, but it also sees a lot of programming and other use since I take it to campus each day and also on trips. In this time, I have lost almost all the feet and now screws are slowly disappearing. It also has started to have some overheating issues when the heatsink seems to shift positions slightly (it shuts off within 90 seconds when this happens). In addition, I find myself wishing quite often that it could do things like stream video properly (without jittering) and compile the kernel (it takes FOREVER on that tiny hyper threaded single core atom processor). So, I've been looking at a replacement that can get similar battery life, has a similarly sized screen (preferably touch as well because I think that would be great fun to use), more than 1Gb of RAM (I can have about 7 tabs open on chrome and then it starts having troubles since I have swap disabled), and a better processor. My most basic requirement, however, is that the laptop be able to run arch.
I've been looking at the Dell Inspiron 11 3000 series since it seems to have the best battery life of my various 11.6" options out there. The processor is a dual core Celeron which sounds old and antiquated to me, even though I believe its based on Haswell (not sure there). It also has 4Gb RAM and 500Gb hard drive. Another option, for $50 more, is a pentium processor which sounds even more antiquated, but is still based on Haswell.
http://www.dell.com/us/p/inspiron-11-31 … redir=true
My question is this: Has anyone managed to get arch working on one of these things? I also imagine that the most new-fangled component would be the touchscreen, so does anyone know the general support of those for linux?
Thanks in advance for any help.

Hi,
Does the WPF application develop by yourself? Please make sure that your application has no dependency issue, if your WPF application lacks of some libs or .Net framework, it cannot execute. Do you get any error message when you try to run it?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dell Inspiron 14R WLAN Card Disabled

Hello,
I have a Dell Inspiron 14R running Windows 7 64 bit. I have had my PC from this past November; about 7 months.
I was using my PC, and suddenly, I started to experience wireless problems. I was unable to get onto the internet. Other devices on my wireless network are able to log on to our network, although that is irrelevant because my radio wasn't picking up anything at all, when it always had from that same location. The connection worked fine using an ethernet cable. After the problem occurred, my Targus Bluetooth mouse also stopped working. This is what I have tried:
Going into Network and Sharing Center, disabling my network adapter, and then enabling it again. This usually does the trick. After doing it over 5 times, it never worked.
Doing a simple system restore. I attempted restoring 3 different times to an update within the last week, each of which failed (probably another issue altogether).
Re-installing my WLAN CARD Driver, and then restarting. This didn't solve the problem.
Checking the Device Manager. It reported that the wireless card was running properly.
Using the DW WLAN CARD Utility. It says under the Link Status tab, after Connection Status, Radio Disabled. I tried right-clicking the icon in my Notification Area, and then clicking Enable Radio. It then shows an alert saying "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it." Pressing Fn + F2, which is also supposed to enable the radio, did nothing, with no action or sign whatsoever from Windows. I also tried running tests under the Diagnostics tab. All hardware tests passed, with the Connection test giving me this alert again: "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it," and then failing. The same thing happened when running the CCX Client diagnostics.
What should I do? The problem is obvious that my card is disabled, as all signs point to that. Does anyone have any ideas on how I could fix it? I've tried everything I know, not to mention countless Google searches.
Thanks!

I am experiencing the same issue with my Inspiron N4010. The network card has disappeared from the system devices. After a reboot, the network connected for about 15 seconds and then went away. I had the system devices displayed at the same time and the network card also disappeared when the network went down. The card worked fine until today. What is the cheapest route to fix this?
Also note the sound has come and gone over the past year. It is not working at the moment. It would be nice to fix both, but will the cost be greater than buying a new laptop or tablet?
I can't say I will ever buy a Dell product again. These laptops seem to only last a year or two. Even my more expensive work laptop which is less than a year old has had its motherboard and hard drive replaced.

Dell Inspiron Mini

Similar Messages

Maybe you are looking for