Dell Latitude D600 Wifi Issue
Hello everyone,
This is my first time installing Arch Linux, and I like what I see so far! My only problem is getting the wifi card recognized on my Dell Latitude D600.
lspci displays this:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon RV250 [Mobility FireGL 9000] (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:03.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
My wifi card is the last entry.
I've installed the recommended driver (ipw2200-fw) from <https://wiki.archlinux.org/index.php/De … eless_2200>, but the wiki page is pretty old, and the setup requires the rc.conf file which no longer exists (as of this year).
iwconfig shows:
lo no wireless extensions.
eth0 no wireless extensions.
...but not the wlan0 I need.
I've tried:
rmmod ipw2200
modprobe ipw2200
as shown on <https://wiki.archlinux.org/index.php/Wi … nd_ipw2200> with both the ipw2100 and 2200 drivers, but with no avail.
I really don't want to trouble the community with such a simple question, but the wiki has me stumped at this point.
Any help please?
02:03.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
...but not the wlan0 I need.
I've tried:
rmmod ipw2200
modprobe ipw2200
I would have thought that you should only need in your case the package ipw2100-fw installed by making sure your system is up to date with the command pacman -Syu as root - and then pacman -S ipw2100-fw
If you reboot after that then the ipw2100 module that seems to be needed at least according to the lspci output you quoted should automatically load and work.
What desktop are you running? If you have KDE then you should be able to use the network icon to click and select a wireless network and work from there. If you are using only the console then you will need to use one of the command line wireless facilities (eg wicd) to get the wireless up and running.
Since your device is listed as 2100 loading the ipw2200 module likely won't work. Hope this helps.
Similar Messages
-
Unable to install MAX on Dell Latitude D600 notebook
I am trying to install NI-DAQ 6.9.2 on a Dell Latitude D600 notebook running Windows XP SP1. I have full local administrator privileges for this PC.
The notebook will be used to develop software for a test rig, but the rig will actually use a desktop PC fitted with a PCI-1200 card (so I cannot try NI-DAQ 7.1 as this does not support the PCI-1200 card).
Notebook specification is as follows :
1.4GHz Pentium M CPU, 512Mb RAM, 3Gb free disk space, anti-virus disabled.
Start NI-DAQ 6.9.2 setup.
Selected the following features :
NI-DAQ 6.9.2 Device Driver (default)
NI-DAQ OPC Server (default)
Microsoft Visual Basic Support
NI-DAQ appeared to install OK.
Re-booted without any DAQ device.
NI-DA
Q documentation installation started and completed OK.
Configure Measurement and Automation System (MAX) started.
Always get error message "Unable to open a connection to the server..." (see attached file)
Unable to rename or delete the "config.mxs" file (as suggested in the error dialog) - Windows always reports "Access is denied", even immediately after re-booting.
Tried installing a PCMCIA DAQCard-700 then running MAX setup, got same error message. (Windows recognised the DAQCard-700 OK, listed in "device manager" as "working correctly").
Tried version 6.9.3 of NI-DAQ, but still unable to install MAX.
Please tell me how to get MAX to install under Windows XP SP1 !!
Attachments:
NI-DAQ_6.9.2_Unable_to_open_connection_to_server.tif 17 KBThere is a KB on the web that explains how to get over this problem and the reference number for this is 2U6ETM44
I have also attached a copy of MSIBlast to make your life doing this a little easier.
Good luck, and hope this helps
Attachments:
msiBlast.exe 232 KB -
Nvidia Quadro NVS 110M (Dell Latitude D620) driver issue
I'm having trouble installing the right driver for Nvidia QUadro NVS 110M video card on my laptop. What ever driver I install it requests for a reboot and when I restart, I get a blue screen.
Things that I have tried (all resulted in blue screen after restart).
Update driver using Automatic update
Downloaded driver from Dell support site (for Vista)
Downloaded driver from nVidia
Downloaded beta driver from nVidia
Please note: It used to work on Windows 7 before on the same laptop - I was trying to replace HDD and cant seem to make it work again with the new OS installation.Chandra SekharHello,
I'd suggest you installing the XP driver in Compatibility mode. Remove that hardware device in Device Manager, right-click on the driver executable/installer file and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows XP in the list-down box;
If the problem still persists, please understand that Windows 7 is a new operating system (only the beta version) and whole driverstore has been reprogrammed; some old driver is not compatible with new OS. I suggest that you should wait for another period of time till the retail version is released and push the vendor company to upgrade their device driver. Thanks for your time and understanding!
For more details, please look at the first Sticky thread at the top of this forum.
What can I do if my hardware does not work?
This will give you some guidelines.
Good Luck! -
Aironet and Dell Latitude problems
We have 3 access points, 2 1121s and a 350. All three are configured identically, using IOS and with 2 user vlans, one configured with WPA/WPA2 and LEAP, and the other with 128-bit WEP. Both VLANs are also doing MAC authentication to an ACS 3.3 server.
Our Dell Latitude D610 laptops with Intel 2200BG wireless built-in can authenticate fine to both of the 1121 APs, but not to the 350. Has anyone seen anything like this, and do you have any suggestions for getting this to work with the 350? The 350 works fine when a client with a Cisco card connects. Thanks.I have a 600m which is the same chasis as the latitude d600. I also have the same wireless chipset. One of things I have found about the intel wireless is with droping connections both at work and home. Work we use 1200's wireless g cisco Aironets. Intel recognizes the problem and has resolved it with new drivers and software available at their site. since then I have not had any issues.
-
Dell Latitude E6540 slow performances
Hello Guys,
A week ago I bought a Dell Latitude E6540 for my designer and she's suffering a slow performances in PS CC.
If a 2 or 3 projects (Not a huge ones) open together, a simple action like dragging objects, show or hide layers and other stuff are extremely slow.
I changed the performances settings from advanced which was automatically selected to basic and it made it better, but I've expected much more of this laptop because of it's CPU. (i7-4800MQ)
Can anyone advise how to resolve this issue?
Thanks in advance.
Noam.You can upgrade your wifi card to this. However, you may not have connectivity right away and may have to update your drivers to get the card to work. Hope this helps!
-Brandon -
Broadcom WiFi issues after sleep/hibernate
This has been an ongoing battle that I have yet to make any progress on.
When coming out of sleep or booting back from hibernate the wifi will not connect to a network.
The error upon trying to connect to a found network is:
Windows was unable to connect to {network name}
After a hard reboot I can connect to any of the networks.
Tried disable/enable the wifi adapter, adjustments to power management settings. Tried fresh installs with various broadcom drivers, with and without power management settings, etc.
S10-3T N470, 2GB
Fresh install of Windows 7 Ultimate x86 (also tried x64)
Broadcom 802.11n Network Adapter
Date: 10/23/2009
Version: 5.60.18.41
Hardware ID: VEN_14E4 DEV_4727
Power Management disabled (Device Manager - "Allow the computer to turn off this device to save power UNCHECKED")
The networks I've tried are both home and work:
Home: AT&T UVerse 2Wire, Linksys WRT54Gv8 w/ WPA2-AES
Work: Apple Airport (unknown security, likely WPA)
Both work with Dell Latitudes, iphone, windows mobile with no issues
I'm fairly technical and knowledgeable but I haven't found what would be causing this issue or others having similar problems. I'm afraid if I can't resolve this soon I'll be retiring the S10-3T - which would be a real shame - so much potential but an unreliable wifi is a problem for me.
Perhaps the best solution would be to replace the Broadcom with another wifi that provides more regular drivers (intel) but I understand the bios has a very limited whitelist of allowed components (really lenovo?!).
Thanks all - GREAT forums - very very helpful/interesting discussionssimilar issues exist within win7 with other cards especially the latest Intel cards: clarify the configuration setting for the wifi adapter and that both 2.4 and 5.2 bands are set to automatic and that your router is also set to automatic: depending on the router, the intel cards will or will not pick up 20 or 40 mgz signals
sorry if this sounds confusing but it is an issue with the card and the router playing nice and the combinations are great: a lot of it is trial and error so that by the time you sort it, you are unable to explain what you did!
I guess what I am suggesting is that it is the settings within the card and the router more than a driver issue (not that some drivers are not worse than others)
hope this helps you problem solve if these are areas you have not yet adjusted and tinkered with
s10-3 0647 Red plus 2gb ram -
Can´t draw on Dell Latitude 10 - Windows 8 ???
Hi guys,
i have a pro version of Dell Latitude 10, it´s a tablet with a touch screen that works fine.
I can even launch paint and draw with my finger, but when i install photoshop cc as trial, i can´t draw anything.
What should i do ? Is there any special drivers needed ?
best regards, Dimitri.IE favorites sinking with you iDevices.
Today I too noticed favorite links that had previously been deleted reappeared. After finding list thread and reading @Paulio999 reply I did the fallowing
to solve the issue, because I keep all my web browser's, computer's, and device's favorites synced.
Open iCloud control panel on all computer you use iCloud on.
Under bookmarks-Options, un-check Internet Explorer.
Click OK button
Click Apply button
Close iCloud control panel
On one iDevice open Safari.
Open Bookmarks
Delete all bookmarks
Select done
Close Safari
On your Windows machine under C:\Users\-user name-\Favorites
Delete all the links that are no longer wanted
Open iCloud control panel
Under bookmarks-Options, check Internet Explorer.
Click OK button
Click Apply button
Close iCloud control panel
Your favorites should now reappear on you iDevices and any changes you make from your windows machine to your IE favorites should now work correctly between your devices.
I tested this on two Laptops, one tower, an iPhone5, and an iPad3. -
How do I install the builtin graphics drivers for my Dell Latitude D620 in Windows 8.1?
Hi, I would like to be guided through the correct driver installation for the in-built integrated graphics driver for my "Dell Latitude D620" Laptop PC which is running Windows 8.1 Pro (32-bit). By default, Windows 8.1 includes ans installs the
"Microsoft Basic Display Adapter driver" to maintain compatibility with the OS. I would like to install the original and genuine graphics driver supplied by Dell Inc. (not by Microsoft) on Win 8.1, how can I achieve this? please
help.Yes, Dell will have better answer for this issue
Since this PC quite old, I suggest contact Dell
Based on product spec, your Laptop maybe using 256MB NVIDIA<sup>®</sup> Quadro NVS 110M TurboCache or
Intel<sup>®</sup> Graphics Media Accelerator 950 (Up to 224MB shared<sup>5</sup>)
http://www.dell.com/us/dfb/p/latitude-d620/pd
there is no driver for Windows 8.1 32 bit
http://www.dell.com/support/drivers/us/en/19/Product/latitude-d620
This is Windows 8.1 system requirement, I suggest discuss with Dell
http://windows.microsoft.com/en-us/windows-8/system-requirements -
Airport Extreme update to 7.6.3 orphans my Dell Latitude D620
Anyone else experiencing this?
I dutifully upgraded my Airport Extreme to 7.6.3 from 7.6.1 as instructed by my computer.
This is the latest version of the Airport Extreme - simultaneous dual band, etc. Purchased a few weeks ago.
My Dell Latitude D620 will no longer connect properly to the network. The "DW WLAN Card Utility" shows that it is sending packets, but not receiving them. The signal strength is strong, as expected and normal.
I've ensured that all updates on the Dell are installed. The hardware is a "Dell Wireless 1390 WLAN Mini-Card", original and internal to the unit. The driver is 5.60.18.9
All other devices (laptops, iphones, Apple TV, etc. - including a more 'modern' Dell laptop) are working fine both before and after the update to 7.6.3.
This worked perfectly prior to the update to 7.6.3. So with considerable trouble, I reverted to 7.6.1, and the laptop could connect again. Upgrading a second time to 7.6.3 and the problem reappears.
If anyone has any ideas on this before I junk my trusty old Dell laptop, please let me know!Did anyone ever found a solution to this?
I upgraded Airport Extreme to 7.6.4 and the Dell D620 is having problem connecting. Sometime it connects but no Internet access. I have 2 other none Dell laptops and Iphone 4. They all work with the Airport router. Just the Dell that having an issue.
Is reverting back to 7.6.1 the only solution? -
Lync 2013 crashes on startup in Windows 8.1 on Dell latitude E6520 machines
Lync 2013 crashes on startup in Windows 8.1 on Dell latitude E6520 machines. Every E6520 with windows 8.1.
Error message is:
Log Name: Application
Source: Application Error
Date: 4/15/2014 3:54:06 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Faulting application name: lync.exe, version: 15.0.4420.1017, time stamp: 0x5067326f
Faulting module name: igdumd32.dll_unloaded, version: 9.17.10.3517, time stamp: 0x532b0b5b
Exception code: 0xc0000005
Fault offset: 0x00001040
Faulting process id: 0x10a0
Faulting application start time: 0x01cf58ecd02118cc
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Faulting module path: igdumd32.dll
Report Id: 14b4ce16-c4e0-11e3-8255-8c705a44a074
Faulting package full name:
Faulting package-relative application ID:
Video driver in the image was originally out of date, changed the driver to the latest and greatest available straight from Intel for the Intel HD 3000 graphics card and this error still appears. Driver 9.17.10.3517 exceeds the minimum requirement
for Lync 2013. The faulting module is related to the graphics driver, but reinstalling does nothing, uninstalling and then reinstalling does nothing, it cannot further be upgraded. This same error affects all the Dell latitude e6520's. It
also only occurs in Windows 8.1. The windows 7 image using the exact same driver version (both the outdated driver and latest driver) works just fine with Lync 2013.
Running Lync with administrative permissions does nothing, disabling hardware acceleration did nothing. None of our laptops come with the bluetooth adapter, and also updated all other drivers such as chipset and soundcard. Error occurs on the
RTM version of Lync, and Lync with SP1 fully updated. The rest of Office 2013 works fine. I am currently at a loss here short of telling the help desk to not image E6520's with Windows 8.1 because Lync 2013 doesn't work on it. But there has
to be a reason for it. Calling out for some suggestions here.
Thanks!We also have the same issue with Dell E6420 running Windows 8.1. Lync application does not respond after start-up. Did you try looking for the error file under
C:\users\username\appdata\local\Microsoft\Windows\WER\Reportarchive
it should create file like AppHang_lync.exe_some numbers. search for the latest one.
Interesting, I don't have any 6420's handy but figured the issue would exist on those also. I looked up the location you mention and see many crash logs for Lync. Not really sure what the error is, just says it stopped working.
Version=1
EventType=BEX
EventTime=130420688460358806
ReportType=2
Consent=1
UploadTime=130420688461296414
ReportIdentifier=14b4ce17-c4e0-11e3-8255-8c705a44a074
IntegratorReportIdentifier=14b4ce16-c4e0-11e3-8255-8c705a44a074
WOW64=1
Response.BucketId=3a18275b4e359a3d32b33b327b07846b
Response.BucketTable=5
Response.LegacyBucketId=81648064370
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lync.exe
Sig[1].Name=Application Version
Sig[1].Value=15.0.4420.1017
Sig[2].Name=Application Timestamp
Sig[2].Value=5067326f
Sig[3].Name=Fault Module Name
Sig[3].Value=igdumd32.dll_unloaded
Sig[4].Name=Fault Module Version
Sig[4].Value=9.17.10.3517
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=532b0b5b
Sig[6].Name=Exception Offset
Sig[6].Value=00001040
Sig[7].Name=Exception Code
Sig[7].Value=c0000005
Sig[8].Name=Exception Data
Sig[8].Value=00000008
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.256.4
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
UI[3]=Microsoft Lync has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
LoadedModule[1]=C:\windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\windows\SYSTEM32\KERNEL32.DLL
LoadedModule[3]=C:\windows\SYSTEM32\KERNELBASE.dll
LoadedModule[4]=C:\windows\system32\apphelp.dll
LoadedModule[5]=C:\windows\SYSTEM32\ADVAPI32.dll
LoadedModule[6]=C:\windows\SYSTEM32\ole32.dll
LoadedModule[7]=C:\windows\SYSTEM32\OLEAUT32.dll
LoadedModule[8]=C:\windows\SYSTEM32\MSVCR100.dll
LoadedModule[9]=C:\Program Files (x86)\Microsoft Office\Office15\LyncModelProxy.dll
LoadedModule[10]=C:\Program Files (x86)\Microsoft Office\Office15\LyncDesktopViewModel.dll
LoadedModule[11]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModel.dll
LoadedModule[12]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModelProxy.dll
LoadedModule[13]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrAs.dll
LoadedModule[14]=C:\windows\SYSTEM32\MSVCP100.dll
LoadedModule[15]=C:\windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.9600.16384_none_dadf89385bc5c7d7\gdiplus.dll
LoadedModule[16]=C:\windows\SYSTEM32\IMM32.dll
LoadedModule[17]=C:\windows\SYSTEM32\MSIMG32.dll
LoadedModule[18]=C:\windows\SYSTEM32\DWrite.dll
LoadedModule[19]=C:\windows\SYSTEM32\msvcrt.dll
LoadedModule[20]=C:\windows\SYSTEM32\sechost.dll
LoadedModule[21]=C:\windows\SYSTEM32\RPCRT4.dll
LoadedModule[22]=C:\windows\SYSTEM32\combase.dll
LoadedModule[23]=C:\windows\SYSTEM32\GDI32.dll
LoadedModule[24]=C:\windows\SYSTEM32\USER32.dll
LoadedModule[25]=C:\windows\SYSTEM32\MSVCR110.dll
LoadedModule[26]=C:\Program Files (x86)\Microsoft Office\Office15\RtmPal.dll
LoadedModule[27]=C:\Program Files (x86)\Microsoft Office\Office15\RtmCodecs.dll
LoadedModule[28]=C:\windows\SYSTEM32\dxva2.dll
LoadedModule[29]=C:\windows\SYSTEM32\d3d9.dll
LoadedModule[30]=C:\windows\SYSTEM32\d3d11.dll
LoadedModule[31]=C:\windows\SYSTEM32\MSCTF.dll
LoadedModule[32]=C:\windows\SYSTEM32\SspiCli.dll
LoadedModule[33]=C:\windows\SYSTEM32\WINMM.dll
LoadedModule[34]=C:\windows\SYSTEM32\WS2_32.dll
LoadedModule[35]=C:\windows\SYSTEM32\PSAPI.DLL
LoadedModule[36]=C:\windows\SYSTEM32\POWRPROF.dll
LoadedModule[37]=C:\windows\SYSTEM32\pdh.dll
LoadedModule[38]=C:\windows\SYSTEM32\MSVCP110.dll
LoadedModule[39]=C:\windows\SYSTEM32\IPHLPAPI.DLL
LoadedModule[40]=C:\Program Files (x86)\Microsoft Office\Office15\dbghelp.dll
LoadedModule[41]=C:\windows\SYSTEM32\bcrypt.dll
LoadedModule[42]=C:\windows\SYSTEM32\SETUPAPI.dll
LoadedModule[43]=C:\windows\SYSTEM32\WTSAPI32.dll
LoadedModule[44]=C:\windows\SYSTEM32\PROPSYS.dll
LoadedModule[45]=C:\windows\SYSTEM32\VERSION.dll
LoadedModule[46]=C:\windows\SYSTEM32\dwmapi.dll
LoadedModule[47]=C:\windows\SYSTEM32\dxgi.dll
LoadedModule[48]=C:\windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[49]=C:\windows\SYSTEM32\WINMMBASE.dll
LoadedModule[50]=C:\windows\SYSTEM32\NSI.dll
LoadedModule[51]=C:\windows\SYSTEM32\WINNSI.DLL
LoadedModule[52]=C:\windows\SYSTEM32\CFGMGR32.dll
LoadedModule[53]=C:\windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[54]=C:\windows\SYSTEM32\DEVOBJ.dll
LoadedModule[55]=C:\windows\SYSTEM32\nvinit.dll
LoadedModule[56]=C:\PROGRA~2\Sophos\SOPHOS~1\SOPHOS~1.DLL
LoadedModule[57]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\mso.dll
LoadedModule[58]=C:\windows\SYSTEM32\d2d1.dll
LoadedModule[59]=C:\windows\system32\uxtheme.dll
LoadedModule[60]=C:\windows\SYSTEM32\WINSTA.dll
LoadedModule[61]=C:\windows\SYSTEM32\SHELL32.dll
LoadedModule[62]=C:\windows\SYSTEM32\SHLWAPI.dll
LoadedModule[63]=C:\windows\SYSTEM32\shcore.dll
LoadedModule[64]=C:\windows\SYSTEM32\kernel.appcore.dll
LoadedModule[65]=C:\Program Files (x86)\Microsoft Office\Office15\Uc.dll
LoadedModule[66]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrCs.dll
LoadedModule[67]=C:\windows\SYSTEM32\WINSPOOL.DRV
LoadedModule[68]=C:\windows\SYSTEM32\HID.DLL
LoadedModule[69]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9600.16384_none_a9f4965301334e09\Comctl32.dll
LoadedModule[70]=C:\windows\SYSTEM32\msi.dll
LoadedModule[71]=C:\Program Files (x86)\Microsoft Office\Office15\1033\lyncDesktopResources.dll
LoadedModule[72]=C:\windows\SYSTEM32\DavClnt.DLL
LoadedModule[73]=C:\windows\SYSTEM32\DAVHLPR.dll
LoadedModule[74]=C:\windows\SYSTEM32\d3d10_1.dll
LoadedModule[75]=C:\windows\SYSTEM32\d3d10_1core.dll
LoadedModule[76]=C:\windows\SYSTEM32\D3D10Warp.dll
LoadedModule[77]=C:\windows\SYSTEM32\sppc.dll
LoadedModule[78]=C:\windows\SYSTEM32\Secur32.dll
LoadedModule[79]=C:\windows\SYSTEM32\clbcatq.dll
LoadedModule[80]=C:\Program Files (x86)\Microsoft Office\Office15\UccApi.dll
LoadedModule[81]=C:\Program Files (x86)\Microsoft Office\Office15\Win32MsgQueue.dll
LoadedModule[82]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.9600.16384_none_7c55c866aa0c3ff0\Comctl32.dll
LoadedModule[83]=C:\Program Files (x86)\Microsoft Office\Office15\1033\ocapires.dll
LoadedModule[84]=C:\Program Files (x86)\Microsoft Office\Office15\Psom.dll
LoadedModule[85]=C:\Windows\SYSTEM32\msxml6.dll
LoadedModule[86]=C:\Program Files (x86)\Microsoft Office\Office15\OcImport.DLL
LoadedModule[87]=C:\Program Files (x86)\Microsoft Office\Office15\ocrec.dll
LoadedModule[88]=C:\windows\system32\mlang.dll
LoadedModule[89]=C:\windows\SYSTEM32\usp10.dll
LoadedModule[90]=C:\windows\system32\windowscodecs.dll
LoadedModule[91]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMediaManager.dll
LoadedModule[92]=C:\windows\SYSTEM32\AVRT.DLL
LoadedModule[93]=C:\Program Files (x86)\Microsoft Office\Office15\AppSharingMediaProvider.dll
LoadedModule[94]=C:\Program Files (x86)\Microsoft Office\Office15\RTMPLTFM.dll
LoadedModule[95]=C:\windows\SYSTEM32\WINTRUST.dll
LoadedModule[96]=C:\windows\SYSTEM32\CRYPT32.dll
LoadedModule[97]=C:\windows\SYSTEM32\MSASN1.dll
LoadedModule[98]=C:\ProgramData\Sophos\Web Intelligence\swi_ifslsp.dll
LoadedModule[99]=C:\windows\system32\mswsock.dll
LoadedModule[100]=C:\windows\SYSTEM32\dhcpcsvc6.DLL
LoadedModule[101]=C:\windows\SYSTEM32\dhcpcsvc.DLL
LoadedModule[102]=C:\windows\SYSTEM32\wlanapi.dll
LoadedModule[103]=C:\windows\System32\MMDevApi.dll
LoadedModule[104]=C:\windows\SYSTEM32\MFPlat.dll
LoadedModule[105]=C:\windows\SYSTEM32\RTWorkQ.DLL
LoadedModule[106]=C:\Program Files (x86)\Intel\Media SDK\mfx_mft_h264ve_32.dll
LoadedModule[107]=C:\windows\SYSTEM32\EVR.dll
LoadedModule[108]=C:\windows\system32\NV\nvumdshim.dll
LoadedModule[109]=C:\windows\system32\nvd3dum.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=BEX
AppName=Microsoft Lync
AppPath=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
ApplicationIdentity=00000000000000000000000000000000 -
Lync 2013 and Dell Latitude 7240 Window 8.1 Problem! Please help SOS
Hi guys,
Can anyone know the solution for my current problem with Lync is frozen and crashes when I start my video call. I have brand new Dell Latitude 7240 with Window 8.1 and Lync 2013. I have tried so many different suggestion from different forums and update
my Lync as well. However, the problem is still there :(
I have been experiencing this problem for almost 2 months. It would be great to get my Lync works with video call. I tested the camera both internal and external camera as well. They works fine with Skype, ect...But not with Lync
Thanks in advance!!!HI
I have seen 100 % laptops of dell which has issue with Lync, I tried to raise this Dell as per them is issue with Lync and even Mircrosoft global team said it dell laptop drivers issue, Some of the cases has been resolved by uninstalling Audio/video
drivers. but not for every laptop.
Regards
zahoor -
Trying to image a Dell Latitude D630
I am trying to image a Dell Latitude D630 laptop using PXE. It is set to PXE
boot in the BIOS. I select Maint Mode when the imaging screen comes up.
Output starts running on the screen as normal then all the sudden the screen
goes black and nothing else happens. I have to end up powering off the
laptop.
I saw a previous post where someone was having the problem and suggeted
toggling between CRT and LCD display on the laptop but this does nothing.
We are running Zen 6.5 SP2.
Any suggestions?Thanks for the help Marcus.
I tried adding the two lines but it did not work. I was finally able to
resolve my issue but using the Zen 7 SP1 Boot CD along with TID 3421576 to
get the laptop imaged. It looks like it is time to upgrade my Zenworks!
Thanks again.
"Marcus Breiden" <[email protected]> wrote in message
news:[email protected]..
> On Wed, 26 Sep 2007 17:30:27 GMT, SRL wrote:
>
>> Can I just tack these two lines on to the end of the file or is there a
>> specific place they need to go?
>> Do I need to reboot after making these changes?
>
> end of file iirc, no reboot of the server necessary
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please remove the - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.didas.de -
Using Dell Latitude D630 with Intel 965 Express Chipset with Adobe CS6 Photoshop 3D features
Hello,
Here is my configuration:
- I am using Windows 7, 4-bit OS
- Dell Latitude D630, which comes with Intel Mobile 965 Express Chipset and Accelleration Drivers.
- If I press CTRL-ALT-F12, I can see the Intel Graphics Media Acccelerator Driver GUI. There are 3D settings
configuration, which are labelled with OpenGL, and a bunch of values that can flipped on and off. So, I have some
warm fuzzy that OpenGL is enabled on my systme.
- When I look at the details of the driver, it says 9/23/2009, driver version 8.15.10.1930. If I attempt to update
driver, and select search automatically, "Windows determined the driver software for your device is up to date".
So, this gives me some warm fuzzy that I'm on the latest driver.
When I open up PhotoShop CS6, and click on Edit->Preferences->Performance, Detected Graphics processor
is grayed out and I am told that I need to upgrade either my driver or my card. Well, I'm on a laptop so that might
be an issue.
My driver seems to support OpenGL, so is there some configuration thing I can do to get Photoshop to recognize my
video accelerator to make this work? Or am I out of luck with using 3D and accelerated features with this laptop?I did try to go through the Intel driver upgrade process.
Visited http://www.intel.com/p/en_US/support/detect?iid=dc_iduu (Intel Driver update Utility) with IE.
Detected my graphics drivers and indicated that:
Product Detected
Intel® GM965
Current Driver Installed
8.15.10.1930
Your driver is current.
So, nothing useful there. What I find puzzling is the when I hit CTRL-ALT-F12 and click on 3D settings, there
are plenty of configuraiton choices for OpenGL, with many settings being Off. So, I was hoping that either (a)
there is some combination of choices with these OpenGL options to enable enough of it so that Photoshop CS6 3D features
would work, or (b) maybe registry settings to hack at to "enable" OpenGL or some way of getting Adobe software to try to
rediscover the accelleration support once I change the settings. -
Wrong sampling rate from Sound Input Read VI on Dell Latitude E6510
Hi,
When I
receive data from the sound card with the Sound Input Read VI, the actual
sampling rate is not equal to the sampling rate set in the Sound Input
Configure VI. I estimate the sampling ratio by dividing the number of samples received
by the difference between the first and the last t0 from Sound Input Read. For
example, if the sampling rate is set to 7000 S/s, the actual sampling rate is
around 6900 S/s. If the sampling rate is set to 7050 S/s, the actual sampling
rate is around 7200.
This problem appears when the
code is run on my Dell Latitude E6510 machine. When I run the
same code on my Lenovo ThinkPad, the sampling rate is correct.
The Labview application I
am developing is to be used to acquire data synchronously from several sources,
including the sound card input. It is therefore important that the sampling rate
is correct.
If anybody has any idea
about what may cause this problem, and a way to fix it, I would be grateful.
OleIt has been a trend the last years that sound card only support some sampling rates, not a range. You should refer to your sound card manual for this kind of information. You should also be aware of that the NI sound interface is junk, and they do care about it either. Use the WaveIO interface instead See the link. But I am quite sure your problem is related to the sound card hardware not some NI driver issue
http://www.zeitnitz.de/Christian/waveio
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
CS4 and Dell Latitude D820
Just wondering if anyone has the same Laptop model as myself and is running Photoshop CS4 on it with no problems?
With so much being said about differing configurations playing a part in CS4s performance, and with laptops offering perhaps the most uniformity in terms of hardware makeup across any two units, I thought it might be illuminating if we could find two systems of the same model and specs where one (i.e mine) has serious problems with Photoshop v11 and one (somewhere among you fine folk) that does not?
Obviously manufacture batch numbers could vary but, apart from that, Im thinking any hardware variables here should be at their most minimal? We could then begin to establish (perhaps) what other than hardware it might be that sees one system working fine and the other not?
For problems experienced on my Laptop system please System Setup 4 on
this page.
Would be interested to hear from any Latitude D820 users who are not experiencing these problems.
Glenn
My System specs (from Run>dxdiag):
Model: Dell Latitude D820 (Shipped:June 2006)
Processor: Genuine Intel(R) CPU T2500 @ 2.00GHz (DualCore)
Memory: 2046MB RAM
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A01
HD: Hitachi HTS721080G9SA00 (80GB)
OS: Windows XP Professional (5.1, Build 2600) Service Pack 3
Display Card: NVIDIA Quadro NVS 120M
Chip type: GeForce Go 7400
Display Memory: 512.0 MB (256MB dedicated)
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.5683 (English)
Driver Date: 11/17/2007 (Latest Available)
NB.
Re the Display driver.
I contacted both nVidia and Dell. Nvidia refers me to Dell as sole provider of driver.
Email reply from Dell tech support (on my asking for any news on new driver):
"I would like to bring it under your notice that I do not have sufficient update to provide you on the shortly available Drivers of new version".
I did speak with a Dell engineer who tells me: Dell can only package and release any new driver as and when updated drivers are provided by Nvidia.Well basically its not the problem with the Routers firmware. It might be due higher level of security which you have set on your Router or it might be your Intel Pro Wireless is unable to communicate with your Router. In this case you need to lower down the security on your router to WEP or WPA Persoanl . If you have already lower down the security on your Router then it might be your Intel Pro Utility which is unable to communicate with your wireless network. In this case you need to disable Intel Pro wireless utility on your Computer and use Default Windows XP configuration utility to connect to your wireless network.
Opene Intel Pro-Set wireless utility on your Computer, On the top you need to click on "Tools" tab and below you will find the Option "Use Windows to Manage WiFi" or "Use Microsoft Client" and click on Yes. So it will disable the Intel Utility.
Now in the system try Locate your "Wireless Network Connection" icon, right click on it and select "View Available Wireless Network" , locate your wireless network, input the security and click on connect. Now check if you are able to go online.
Maybe you are looking for
-
Creating A Web Service from a Function Module in ERP2004
I have searched for documentation on this without success. I would be grateful if anyone could point me in the direction of any documentation on this subject, how to do it and what infrastructure needs to be in place for it to work. Many Thanks David
-
Where to chk the PipeLine process steps in BPM Scenario...
hi experts, i hav a scenario where i need to send multile file formats to an synchronous R/3 system and from R/3 it needs to be forwarded to the Target system in file format... its a BPM scenario... i need to CHK the sequence of Steps or Pipeline pro
-
Hi experts, My form is opening in enter query mode what i want is after performing the required action my cursor will go to a perticular item. suppose after executing one enquiry about a empno i want that my cursor will go to join_date item. can you
-
Report published as web service with parameters
Post Author: kevinzebeste CA Forum: Publishing hi,I have a problem in a report published as web service.indeed, the report has a parameter, a date.Client side I do this://I create the parameter ParameterFields paramFields = new ParameterF
-
Hello, Im have problems to start my report server which installed in windos 2008 R1. After installation works fine. Heres the log file of the console log of my report server 12/04/18 17:54:18 Start process OpmnIntegrator: Register Ping callback. Apr