Dell OpenManage Power Center - using it via SCOM 2012

Hello,
Is anyone using OMPC on their Management server in order to use the functionality of OMPC via SCOM2012?Does it show the top power users easily?
Is there much messing around to get it going?
Thx,
John Bradshaw

Hi,
Maybe you can try Dell Server Management Pack Suite.
http://en.community.dell.com/techcenter/systems-management/w/wiki/4118.dell-server-management-pack-suite.aspx
Niki Han
TechNet Community Support

Similar Messages

Unable to monitor SLES 10 SP4,SLES 11 SP3 and SLES 11 SP2 via SCOM 2012 R2

Hi ,
I am unable to get SLES 10 SP4, SLES 11 SP3 and SLES 11 SP2 under SCOM 2012 R2 monitoring. The PAM ,glibc and openssl are at the right versions.
Per the documentation SCOM MP for unix/Linux provides monitoring of SUSE Linux Enterprise
Server 9, SUSE Linux Enterprise Server 10 SP1, and SUSE Linux Enterprise Server 11 operating systems. Does this mean it cannot monitor SP2, SP3 and SP4 for the same Operating systems?
Plat form not supported is the error which I get.
Thank you much,

There should not be any problems with monitoring SLES 10 SP4 or SLES 11 SP2/SP3. If you are getting a "platform not supported" error, it may be that the right management packs have not successfully imported. Can you give more details on when
you get the error, and the management pack versions that you have installed? And what Update Rollup (UR) for OpsMgr do you have installed? The latest is UR4, and the Linux/UNIX management packs for UR4 are here:
http://www.microsoft.com/en-hk/download/details.aspx?id=29696 . Be sure to download the version for "R2".
Michael Kelley, Lead Program Manager, Open Source Technology Center

Does anyone tried creating dashboards using VSAE for SCOM 2012 r2

how can i create custom dashboard views using VSAE,
Does anyone find any tutorials on how to do that?
Can anyone help me in doing that?
Thanks & Regards, Suresh Gaddam

Hi,
Hope the articles below can be helpful for you:
OM12 Dashboards
http://blogs.technet.com/b/mpauthor/archive/2013/07/24/om12-dashboards.aspx
System Center Management Pack Authoring Guide
http://social.technet.microsoft.com/wiki/contents/articles/15251.system-center-management-pack-authoring-guide.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Can I install IDQ 9.6.1 with Power center 9.5.1 HF4

Nope. The binaries are tightly bundled, you cannot install one without the other. The only alternative you may have is to install 9.6.1 in parallel to 9.5.1; under Unix/Linux that's easier to do than under Windows, but even under Windows this should be possible (because the Windows services installed by both versions have differing names). Regards,Nico

Hello, Currently I have installed informatica power center 9.5.1 HF4. I need to install IDQ 9.6.1. I did get the install for the IDQ9.6.1 but it came with the complete install with the power center 9.6.1 HF1. Is there a way to just install IDQ 9.6.1 and not the complete power center using the install file given. Thank you for your help in advance.

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Monitor Dell Powerconnect Switches/Routers using SCOM 2012

Hello,
We are trying to find a way to monitor approximately 20-25 Dell Powerconnect switches/routers (models 5324,5424,5448,5548,6224,6024) through SCOM 2012.
Using SCOM network discovery we are able to get all Dell Powerconnect switches listed, but we are unable to get a network node dashboard, nor vicinity view 1 or 2 hops further. We are able to only see connected network printers and some serial/ethernet devices
we have.
In addition, SCOM 2012 seems to be able to recognize the model of only Dell Powerconnect 5224 switches. We have found that on the SCOM management server the "C:\Program Files\System Center 2012\Operations Manager\Server\NetworkMonitoring\conf\discovery\oid2type_Dell.conf"
only lists Dell Powerconnect 5224 switches as well as several models from the 3000 series.
We have contacted Dell PRO support, but their reply was that there is no management pack for SCOM available for their networking devices.
Would it be recommended to use http://xsnmp.codeplex.com/ on SCOM 2012 to monitor those switches and get a network digram view or are there any plans to include those MIBs in a future CU or SP of SCOM 2012?

Hi Alex
Network monitoring has changed from SCOM 2007 R2 to SCOM 2012 so this statement
"but if this works for SCOM 2007, it should apply to SCOM 2012"
is not accurate when it comes to network monitoring:
http://blogs.technet.com/b/momteam/archive/2011/10/24/migrating-operations-manager-2007-network-monitoring.aspx
Would it be recommended to use http://xsnmp.codeplex.com/ on SCOM 2012?
The codeplex solutions for SCOM 2007 R2 will not work on a new \ clean install of SCOM 2012 (if you upgrade from SCOM 2007 R2 they continue to work as legacy devices but you can't add more monitoring).
SCOM 2012 seems to be able to recognize the model of only Dell Powerconnect 5224 switches
What do you mean by recoginse? SCOM can discover network devices but there is an "approved" list that allows for extended monitoring:
http://www.microsoft.com/en-us/download/details.aspx?id=26831
You should still be able to discover and monitor other devices though:
http://blogs.technet.com/b/momteam/archive/2011/09/20/what-gets-monitored-with-system-center-operations-manager-2012-network-monitoring.aspx
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Dell 1950 power-edge III gen, key board and mouse stop after reboot using F1 key--Red hat 6.0

I am trying to install OS (Red hat 6.0) in Dell 1950 power-edge III gen, After booting CD i got option to hit F1 to install or let is continue to start the installation process. now screen goes to next step and key board and mouse stop working . it stop me from further step. Please help
Sam

Try booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/

Need an efficient solution using Informatica Power center

Need an efficient solution using Informatica Power center-
I have a requirement-
1-I have a database which gets refreshed everyday.
2-I have a workflow which gets started only if the database gets refreshed.
So I have to design a workflow-- which will do the following things-
a- Checks if the database has been refreshed today or not(Not hard coding...as this workflow will run everyday to check that)
b- If the database has been refreshed then only start the workflow wf_XYZ
( SUGGESTION-may be after the session/task finds out that the db has been refreshed it can create a trigger file which will eventually start the next workflow) else can wait to get the db refreshed.

Just implement the change capture process to load new data.
That would take care of it, and you can relax.
If helps mark
~ http://cool-bi.com

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
Gautam.75801

Hi,
We may need to create script based rule using PowerShell or VBScript.
Please go through the below links for command get-mailboxstatistics:
Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
Regards, Yan Li

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
Note: I do not want to physically remove the battery.
If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?

Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware!

Custom Workflow Load Error in Power Center error code 36331

Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.

Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

How to get the current data and time of SCOM server via SCOM SDK (API) calls?

Hi,
I need to read the current date and time of SCOM server via SOM SDK.
Is there a class in SDK that provides this info ?
Thanks,
satheesh

To get time and date of Alerts of SCOM, You can use following command let "get-scomalert"
Also, You can refer below links
http://blog.tyang.org/2013/02/21/using-scom-2012-sdk-to-retrieve-resource-pools-information/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

SCOM 2012 R2 HA design but using SQL 2014 Standard edition

Hi All,
I want to deploy SCOM 2012r2 with a HA design (but have constraints!)
Plan is two management servers with all roles to each (fresh deployment so 2012r2 RU5)
SQL servers need to be 2014 standard edition due to licensing and cost constraints.
Design is to be split between two datacentres that are fibre connected and sub 3ms latency
Plan was to have a Management Server and a SQL server at each location.
Each location has a dedicated SAN but SAN replication is not an option.
What are my SQL options for the DB??
AlwaysOn FCI is not preferable as it gives a single point of failure due to shared storage requirement.
I read Database mirroring is not a supported config but this isn't Microsoft direct info just blog post, is this correct.
Which leaves me with log shipping, is this supported and the best option??
Would be great to get advice on what works well in the field with a contraint of having to use SQL Standard edition!
Thanks
James

Hi,
No additional licenses are needed for management servers or SQL Server technology.
System Center 2012 R2 licensing
http://www.microsoft.com/en-us/Licensing/product-licensing/system-center-2012-r2.aspx#tab=2
Reference:
SCOM 2012 R2 HA options with Server 2012 and SQL 2012
https://gallery.technet.microsoft.com/SCOM-2012-R2-HA-options-540beb95
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCOM 2012 R2 Gateway installation error and no System Center Management server after install

Hi,
I have installed SCOM 2012 R2 Gateway and I got an error 25372 error at the start of the install. It still installs though. However I have no system center management service running in services but I can see healthservice.exe is running.
Why am I not seeing the system center management service?
Thanks.

Using gateways with certificates is always a bit complicated because there are several things that needs to be configured correctly.
DNS: The MS and the GW server need to be able to resolve each others FQDN. you can adjust the hosts files if needed.
Traffic is only TCP 5723 from the gateway to the MS. You can test this with the telnet client.
Certificates:
http://marthijnvanrheenen.wordpress.com/2012/03/28/scom-2012-connecting-a-gateway-server-using-certificates/
The gateway server should NOT be in pending management. Remove it from here before running the approval.
You should start by making sure DNS and the 5723 port are functioning because that is probably where the problem is.
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Dell OpenManage Power Center - using it via SCOM 2012

Similar Messages

Maybe you are looking for