Dell photo printer 720 and mac mini?

i just got a mac mini and i want to use the dell printer that i already have. how can i get it to work
thanks,

The contributor named Matt Broughton knows how to do this - but read here:
http://openprinting.org/showprinter.cgi?recnum=HP-DeskJet720C
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/pnm2ppa

Similar Messages

Out of Frequency Problem with Apple Multiple Scan 720 Display and Mac mini

If a resolution with a horizontal and/or vertical frequency not compatible with your display, in this case an Apple Multiple Scan 720 Display, is selected in the Display preference pane of the Mac OS X 10.4.10 system running on a Mac mini (Early '06), you will recieve a message on your screen about being "out of frequency" and the power management feature will shut down and restart your display repeatedly. The following solution should restore your display to proper function. It may apply to other displays and Macintoshes running Mac OS X, but it has only been tested specially on this setup.
1. Shut down the Mac mini with the power button (press and hold for 5 seconds)
2. Start the computer up with the Mac mini Mac OS X Install Disc 1 (press the power button, insert the disc, hold the C key down until the progress bar starts up)
3. Click on the language, then select Utilities > Terminal...
4. Type "cd /" and return
5. Type "cd Volumes" and return
6. Type "cd your hard drive name" and return (you need to enclose the hard drive name in double quotes if more than one word)
7. Type "cd Library" and return
8. Type "cd Preferences" and return
9. Type "rm com.apple.windowserver.plist" and return
10. Type "exit" and return
11. Quit Terminal
12. Select Utilities > Startup Disc...
13. Select the OS on the hard drive and click on Restart button, holding down the Shift key until the progress bar starts.
14. Log in to the account that had the display problem in Safe Boot mode
15. In System Preferences select Display, select a resolution with the appropriate frequency, 60 Hz should be fine, then close System Preferences
16. Restart the computer, log in to the account normally, and the display should be functioning properly.
DO NOT SELECT AN INAPPROPRIATE RESOLUTION/FREQUENCY FOR YOUR DISPLAY IN THE DISPLAY PREFERENCE PANE! BE AFRAID, BE VERY AFRAID!
Mac mini (Early '06) Mac OS X (10.4.10) Apple Multiple Scan 720 Display
Mac mini (Early '06) Mac OS X (10.4.10) Apple Multiple Scan 720 Display

Just a correction and an elaboration:
It should be Startup Disk... with a k, not a c.
Both the resolution and the frequency must be appropriate for your display to work properly. Check your documentation or the manual information available on your display for the appropriate resolutions/frequencies. Evidently the Apple Multiple Scan 720 Display is considered so old that no allowance was made for it in the Display preference pane of Mac OS X 10.4.10.
Mac mini (Early '06) Mac OS X (10.4.10)

Printer driver for Dell Photo Printer 954

I am about to give my Macbok Pro to a person with a Dell Photo Printer 954. I have been trying to find a driver for the printer to install on the laptop but it appears that Dell doesn't make drivers for Macs. Does anyone have any suggestions as to how to get the Printer and laptop to work together?
Thanks.

Not surprisingly, Dell doesn't provide an OS X driver for it. Assuming since you've asked it doesn't work, so you may need another printer. I've used Canon printers for years, and my curret MP560 AIO works nicely via wireless connection.

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

Saving as a PDF file for some users have been a problem. If you boot into Safe Mode and run iPhoto you can create undamaged PDF files. We don't know why the problem but this is a workaround.
This problem prevents many from ordering books, calendars and cards since iPhoto creates PDF file of them for uploading and printing. Booting into Safe Mode lets them successfully order those items.

How do I print from my mac mini with system 10.5.8

How do I print from my mac mini with system 10.5.8? do tell...

Rjanyk, welcome to the forum.
What is the make/model of the printer that you are using? I presume that it is an HP printer.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to share an usb-connected Windows Vista Printer with a Mac Mini

Hi,
I own a laptop Sony with Windows Vista (64) which has a printer connected via USB. I recently purchased a MAC MINI (middle model) and wanted to use my laptops printer for printing from my Mac mini. is this possible? thanks. Mx

Hey there Max,
If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
Mac OS X: How to manually add a Windows shared printer - Apple Support
Ciao,
-Jason

Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm not a professional, just a keen amateur, but I do want to use quality software and equipment to do the finest job I can.
Answers to a previous post in the Illustrator forum (Re: Animation – is Illustrator what I should be using?) suggested that I try Flash.
Background
I'll be using Premiere for converting my audio-visuals to HD format. Back in the 1980s I was right into three-screen slide shows. As part of the transforming, I'll be introducing a small number of video clips (hence my need for Premiere) and also short animation sequences, probably 10 seconds at most. The animation will be done by an artist friend who is keen to extend his talents into computer art. If I buy the computer (some sort of Mac), a Cintiq, load the appropriate software, and then loan it all to Steve and show him how to use it, he'll happily spend as much time as required for the animation. We're bartering: he gets to use a computer and tablet for as long as he wants, I get animation.
A typical animation might involve Steve drawing outlines at appropriate intervals, over a background, then having the software generate the in-betweens. Watercolour-style shading (i.e. not fill-type, monotone colour) would be added, probably manually for each frame, unless the tweening can competently handle watercolour-style shading. For some of Steve's doodlings on his iPad (simplified versions of what we're aiming for), check out http://www.mediafire.com/download/sj731c17co55g5w/Steve's_iPad_Work.zip
We're both new to this and recently spent an afternoon together looking at videos on Flash and the Cintiq. The combination looks like it will work for us, but I have a few questions which I'm hoping some of the experts on this forum can answer. A simple yes or no may save me hours of reading documentation only to find out that something won't work as I want. I'll also include some questions about the Cintiq and Mac Mini in case someone who uses them with Flash can provide answers. I live in a place where I have no access to these devices before I buy. I have to buy 'cold'. Thus my wariness.
Please note: I'm not an artist and Steve isn't computer literate. So some of these questions might appear pretty dumb to an experienced user of Flash/Cintiq.
Ques 1
Is Synfig Studio (as suggested at the end of my Illustrator thread) something I should consider? Or is Flash a better bet?
Ques 2
Does Flash have vector tools that mimic a watercolour paintbrush like in Photoshop? Or is that not possible as a vector, and such effects have to be done outside Flash and then imported as background (or other method)?
Ques 3
When a Flash animation is finished, how is it exported, for example, to Premier? Do you export as h.264?
Ques 4
It is not clear to Steve and I after viewing three Cintiq videos, how the Cintiq interfaces to Flash. Does the Cintiq know about Flash, and appropriates certain drawing tools automatically? Or do you have to tell Flash (or the Cintiq) that this button on the Cintiq now operates this tool in Flash?
Ques 5
Do Flash and Cintiq work well together – and easily?
Ques 6
Do I need a monitor to be able to use Flash with the Cintiq? Or would a Mac Mini be a suitable computer – with the Cintiq acting as monitor? Steve won't ever be using this setup as a computer. He'll be treating the Cintiq as a canvas on which to draw and paint.
Thanks in advance for any replies.

Hi Guy,
I thought I was the only one around who was old enough to have worked on wide screen multi-image slide shows!
Flash may be the right product for you and Steve. I use Flash with an Intuos 4 tablet and it works fine. What you want to do is to search the Flash forums for references to Cintiq. There may be some problems that interfere with your intended use, or it may work exactly as you want. The important element for working with any Wacom product is to be sure that you are using the latest drivers for the Wacom product.
If you choose to use a mac mini, get a new one, one that can use a lot of memory, you'll need it.
You can export Flash files to video in most any file type and compression is installed on the computer. So, if you're going to use a Mac, install Quicktime Pro and you should have everything that you need.
I have never heard of or used Synfig Studio, so I can't comment on that.
Flash's paint tools are different from Photoshop and more similar to Illustrator's. You will have all of the flexibility of the Cintiq to control painting effects, it will take some practice, but you should be able to get the effect that you're describing.
Hope this helps with your decision.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Why is my Internet connection hanging on both MacBook and Mac mini, but not PCs, Xbox, or iOS devices?

I have a MacBook pro and Mac mini both running the latest version of lion. I've had this issue with my MacBook for sometime now, but just dealt with it and figured it was isolated, but now I am finding its not.
Essentially, I will open up safari, or Chrome, and the first few pages will load fine. Sometimes I will get lucky and be able to browse normally, but after awhile, safari just hangs there and stops loading. I can close the window, and open a few more pages before it does it again. Both my mini and MacBook do this, but only on my home network. My MacBook runs perfectly fine on my work wi if, and other wi fis, so I definitely know its my home modem. If I wait it out I can surf the Internet again, but this dead time is absolutely killing me. It just randomly stalls, on both computers.
I current have time Warner cable roadrunner, with a cable modem gateway. The issue was happening on a straight connection. I had hoped getting a time capsule and connecting to that network would solve things, but it didn't. Interestingly enough, my Pcs, Xbox,and all 4 of my iPads and iPhones work just fine on the wifi, so there has to be a communication issues with the MacBook and mini with the cable router.
I've tried messing with lions network DNS servers and tried opendns ones, but those didn't work. Sometimes I can fix the problem for a few hours by power cycling the modem and router, but I shouldn't have to do that over and over every time it's an issue. I've also tried removing and adding the wi if connections, but that.works for a minute or two and then the problem resumes.
Now, I have my time capsule connected to the gateway, and tuned the time Warner modem wireless off, which didn't help of course, but at least I'm properly backed up.
I'm not sure what the issue is. I've even tried typing an ip address of apple during a dead time to see if that worked and didn't.
Does anyone have any other ideas? I'm pretty much at my wits end in this, any ideas would be greatly appreciated

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Using Time Capsule and Mac Mini to replace a PC.

I have 4 macs of various vintage in the house and 1 PC. I use the rather robust PC as the server for my itunes library. I'm fully uploaded to iCloud. I'd like to replace this final PC with a Mac Mini but none have a harddrive large enough to accomodate my iTunes library. (about 785G of music and video) Can I use a Time Machine as the storage device for my iTunes library? Can I connect the Time Machine and Mac Mini via Thunderbolt for fast data access? Also, if I can use the Time Machine for storage of the iTunes library, should I consider the iCloud to be my "Back Up" or should I get an additional Time Machine for back up? Also, I use and AirPort Extreme as my wireless router with 2 AirPort Expresses to expand my wifi network. Can I simply add Time Machine to my existing network or will I need to replace the AirPort Extreme with the Time Capsule?

Can I use a Time Machine as the storage device for my iTunes library? Can I connect the Time Machine and Mac Mini via Thunderbolt for fast data access? Also, if I can use the Time Machine for storage of the iTunes library, should I consider the iCloud to be my "Back Up" or should I get an additional Time Machine for back up? Also, I use and AirPort Extreme as my wireless router with 2 AirPort Expresses to expand my wifi network. Can I simply add Time Machine to my existing network or will I need to replace the AirPort Extreme with the Time Capsule?
Don't use Time Capsule for media storage.. it is not suitable and although pressed into service it is a pain. (Time Machine is software backup on the computer and is completely unrelated to the TC).
The problem with using Time Capsule to Time Capsule, is simple.. it doesn't have any software to do it.. The TC is a backup device.. not a NAS. Do not try and use it as a NAS.
You can add a TC to the network without doing much.. just bridge the TC and it will work fine plugged into the AEBS.. but again it is expensive waste. You are buying a router with enclosed hard disk drive and turning off the router.. so all you have is a hard disk which is networked.
If you get a mini use firewire external drive.. you can get 2 or 3 TB fairly cheaply and plug it in. Then back up to a TC if you really want, but any NAS with Time Machine extensions will do the job. Or a hard drive in another Mac made available to the network.

How do i install a dell 1130 printer to my mac xo s laptop

how do i install the dell 1130 printer onto my mac xo s

Hi there hunna1139,
You may find the information about setting up printers in the article below helpful.
Mac Basics: Printing in OS X - Apple Support
-Griff W.

If i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

if i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

Yes, but if you want these devices to have complete capability of calling each other they each must have their own separate, individual e mail address. If they don't have individual e mail addresses, the i phones will be able to call each other because you'll be using their individual phone numbers -- the Mac mini will be able to call the i phones, but, the iphones will not be able to call the Mac mini. This is because the iphones will be using the mini's e- mail address to make the call, and if they have the same e mail address, they will think they are calling themselves, so the call will not connect.
So, the way I see it is, if you keep all of the email addresses the same, the only thing you'll loose is the ability of the iphones to call the mini.
EDIT: Thinking about it, my first sentence needs to be modified. Your iphones can share an email address but it must be different from the Mac mini address.
This isn't rocket science, but it can make your head spin. LOL

Os x lion needs 2gb memory and mac mini only has 1gb how do i upgrade

os x lion needs 2gb memory and mac mini only has 1gb how do i upgrade

Apple Menu > About This Mac > More Info
Mine is a MacbookPro8,2
Your model number is needed to determine how far it can be upgraded and how easily.

HP Photosmart Premium: photos print wet and with grainy image.

Photos print wet and image looks almost like a posterization; the color seems okay, but the image has a grainy patterns of tiny dots all over it.

What printer model - there are several different Photosmart Premium models? What program are you printing from? Are you using photo paper designed for inkjet printing? What are the driver settings for print quality and media type?
Web images are typically 72ppi, while for printing 200ppi or more is typically needed to prevent grainy images. Make sure the source photo's are of reasonable resolution.
If you are printing from a program such as Photoshop that gives an option of RGB or CMYK printing be sure to select RGB. While the printer inks are CMYK the driver is expecting RGB (or sRGB) source data. Printing with CMYK selected will result in very oversaturated prints.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I need help to take decision to choose between iMac Late 13 and Mac Mini Late 12

Hey guys,
I have currently got iMac 27 3.2 GHz mid 2010 and since I am a photographer it unfortunately dosn't meet my requirments at all! It has recently become too slow and that is why I have taken my decision to purchase a new desktop to improve!
I was intensely awaiting new Mac Mini Late 2013 at Apple 22 Oct event yet no new Mac Mini came up for upcoming year! Now I am very skeptical to choose between to options; iMac Late 2013 and Mac Mini Late 2012! Since having high performance is really essential for me, I am going to tune up my device with 2 Samsung 840 PRO SSD and 16GB RAM to take advantage of the best possible performance.
Since I can easily utilise my iMac 2010 27" as display for Mac Mini, please instruct me which on I should buy or I have to be more patient for next Mac Mini!
Thanks in advance!

I am not sure how you are planning to "easily utilise my iMac 2010 27" as display for Mac Mini" I am concerned that might not work out nearly as well as you might think. I have seen that attempted by others and the results were pretty clunky and could easily wipe out any anticipated speed gains. Be sure and talk to someone who uses an iMac as a display for another computer before you spend any money.
That said, if I were in your shoes I would either go with a current top end iMac or a maxed out, top end Mac mini and a 27" Thunderbolt monitor. You will end up spending about the same either way. You can save a few hundred dollars buying factory refurbished machines from the online Apple Store or Smalldog.com but you take your choice of what is available and don't expect it to be there tomorrow.

Dell photo printer 720 and mac mini?

Similar Messages

Maybe you are looking for