Dell PowerVault MD1000 with Mac OS X Server 10.5 (mac pro with fiber connec

Hey Guys. Its time that i add a bulk amount of storage to our mac network.
Currently Our network consists of one mac server which is a Mac Pro with Mac OSX Server 10.5 installed on it with 4 x 750GB Hard Drives with a couple of client machines. I now need to add atleast another 6TB to the network. This needs to be seen as the server as one drive so that 6TB needs to be raid prosume (raid 5)
Now in the Mac Pro server we have a Fibre Card that we dont currently use with 2 slots. My Plan is to buy a Dell PowerVault™ MD1000 (http://configure.euro.dell.com/dells...ulmd1000sata) and put in the amount of hard drives i require into the Dell Storage.
Would this work. If i bought the Dell PowerVault™ MD1000, would i beable to hook this upto the mac server and use it as a storage drive? Although i do no networking. Im still very new to this.
Ideally im looking for something similar to an Xserve Raid, but with out the Apple price tag on the outside if you guys no what i mean.
Best,
Nathaniel

You would at least need a SAS/SATA controller - preferably a hardware RAID one, much like the one bundled with this unit - but it also needs to be OS X compatible.
I would look for something that is known to work, not something you "cobble" together.
The FibreChannel card does you no good if you haven't got a device with FC ports.

Similar Messages

  • HT202856 Dell P2715Q for 2013 Mac Pro.

    The new Dell P2715Q 4K monitor looks to be a technically compatible monitor for the new Mac Pro.  I see it supports DP 1.2 and MST.
    Anyone using this monitor and and vouch for its use.
    Thanks.

    Hi,
    I just setup a pair of these P2715Q monitors with my 2013 MacPro using the supplied MiniDisplayPort to Displayport cables. The screens look fantastic. The main issue I'm having is after restarting or cold starting the computer. Both monitors appear and only show a blank desktop. No menu bar, no Finder icons, etc.
    The only fix so far is to power off one of the monitors - then back on. Then all is fine. I've unchecked the Mission Control thing to allow displays to have separate spaces. On a normal startup - the second monitor is usually just a blank desktop. It's like they are both showing that blank desktop.
    You mentioned you were having similar issues. Any other resolution to this?
    I ordered a pair of minidisplayport to minidisplayport adaptors to try - incase the rub is with the included cable configuration. I've tried resetting PRAM, NVRAM, etc. - Tried different thunderbolt ports.
    Actually  - when trying different thunderbolt ports - things got wonky in that the second monitor stopped being acknowledged by the computer. I kept moving the thunderbolt cable around - then it finally came back on. Not fun.
    Another strange issue yesterday was when I sat down to work - both monitors were in sleep mode (computer still running though) - the primary monitor wouldn't activate. Even after a restart. I couldn't even power cycle the monitor with the power button. I ultimately had to pull the power cord on the monitor to get it back. Again... not fun.
    One thing to note as well - My primary monitor is Rev 01... the secondary was built 2 months earlier and shows Rev. 00. I'm waiting for them to replace the second monitor. These guys update the firmware and other items and never tell anyone what's changed. But I sure want the most current build.
    Any thoughts? - I'm running 10.10.2.
    Thanks,
    Sam

  • Mac Pro w/ Fiber Channel, Can it sleep with XRaid attached?

    I wanted to know if the new mac Pro can fall asleep when it has an xraid attached via its fiber channel card.
    My Dual 2ghz G5 does not, this is why I'm asking.
    Your comments are welcomed.

    Not sure, but on the 'old' one,by design, NEITHER the Fiber card and Raid card will allow 'doze' but not 'deep sleep' of the Mac Pro in order to sustain connectivity, battery charge and redundancy, respectively.
    I doubt that changed.
    Anyone?
    d

  • Non mi si aprono delle applicazioni incluse su mac pro

    non si aprono le Applicazioni incluse su mac pro retina acquistato da una settimana. Seleziono l'app, non si apre ed inizia a saltellare.
    Grazie

    Dal momento che solo purchsaed vostro Mac, avete 90 giorni di consulenza telefonica gratuita con Apple. Vedere il pulsante Contatti nell'angolo in basso a destra di questa paage.

  • Dell U2711 in a Mac Pro - Best Callibration settings?

    Hi guys. This is my first Post. This message is to ask if anyone has a really good calibration setting for this monitor DELL U2711. I purchased this monitor 1 month ago and want the best settings to use it in a Macpro 3.1. Im a graphic designer and also use after effects and final cut for motion graphics.
    If anyone has good settings to recommend it would be great.
    Thanks a lot!!

    If you think calibrators are too expensive and if your not using it professionally for mission critical work,
    then check out the Huey Pro. Because even a cheap calibrator is better than no calibrator.
    http://www.buy.com/prod/pantone-huey-pro/q/loc/105/204305370.html
    Edit. Just realized you'd be using it for Professional use so you'd probably want a higher grade one.
    Though I would still recommend it over using ready-made profiles.
    Message was edited by: Paul Veronin

  • Strange dual monitor behavior: mac pro + leopard + x1900xt + 2 dell 2001FPs

    I recently purchased a mac pro dual quad core with radeon x1900xt graphics card. Updated to 10.5.1. I have a dual monitor setup: 2 Dell 2001FPs connected to the x1900xt with dual-link DVI cables.
    Here's the problem:
    I want to use both monitors at their optimal resolution (1600x1200). I can get one monitor to run at 1600x1200 by changing the display preferences, but when I change the secondary monitor to something above 1280x1024, it goes dark, then doesn't come back on (the green light remains on, however). Occasionally while this is happening I will get a message on the black monitor telling me the computer is asleep. It obviously is not since I can see it is awake on the operating screen.
    Here's where it gets weird:
    I just found out that if I drag the mouse over into the darkened screen and then click a couple times, the monitor comes alive at the desired 1600x1200 resolution! If I restart from there, I get the primary monitor to come up upon startup, but I have to change the secondary monitor back down to 1280x1024, then back up to 1600x1200, then do the mystery clicking with the mouse!
    The problem occurs no matter which monitor is primary and no matter which slot is being used on the graphics card.
    To me this sounds like a driver problem, but I'm posting in the Mac Pro forum to see if any others have purchased the same configuration and have similar issues.
    Message was edited by: istra

    It appears I have solved my problem...for the time being.
    1. rechecked all connections, replaced cable on secondary monitor with new (no change in behavior)
    2. reviewed system log and saw this junk:
    {quote:title=system log}
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Con trast.monitorPanel/Contents/MacOS/Contrast and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization.
    Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/TVO ptions.monitorPanel/Contents/MacOS/TVOptions. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/TVO ptions.monitorPanel/Contents/MacOS/TVOptions.{quote}
    The message above occurred each time I booted the mac pro and I think also when I changed resolutions on the monitors. This appeared to me to be a call to the specialized Apple Display extensions and preferences, not for non-apple displays.
    Resolution:
    I went into /System/Library/MonitorPanels/ and copied the AppleDisplay folder to the desktop and renamed it to XXXX.old. I deleted the AppleDisplay folder from its previous directory (I left behind the Arrange.monitorPanel, Display.monitorPanel, Profile.monitorPanel and VGADisplay.monitorPanel files). I then rebooted. No problems since. I can change resolutions all I want and my secondary monitor kicks right in, never staying black.
    Note: this seems to work for me because I am using Dell monitors on the mac pro with the x1900xt graphics card. I wouldn't do this if you have monitor trouble, especially if you have an Apple Display, as it seems these files are important for those.

  • New Mac Pro/Yosemite lost display resolutions that were in Mavericks

    After a 9 hour migration process from my old Mac Pro, late 2007 2.8Ghz Dual Quad core, to a new Mac Pro 3.5Ghz 6-Core, I have had issues with the display resolution I used on my old Mac Pro. They don't show up in the list of available resolutions, and now everything on my Dell 30" display is HUGE! How can I get the resolution settings back to where the old Mac Pro was?

    In the System Preferences "Display" pane - do you have "Best for display" or "Scaled" selected for the problematic 30" Dell display. Based on your comments I'm guessing it's the "Scaled" option which should show you the list of all resolutions that it knows your graphics board can do. So what graphics board do you have in the new and old Mac Pro? It's listed in the "System Information" app (click on the Apple in the menu bar at the top of the screen, then hold down the Option key and then click on "System Information". The graphics board is listed in the "Graphics/Displays" option about half way down the list of Hardware items on the left of the page. Did you migrate the old graphics board in the older Mac Pro over to the new one or does the new Mac Pro have it's own? What exactly is the list of resolutions that are shown for your new Mac Pro with the Dell 30"?
    Also I'm a little confused - on which system is the Dell 30" on now - the old Mac Pro or the new one? Which resolution setting did the Dell on the old Mac Pro used to be set at and what is it now on the new Mac Pro?

  • Best Router for both a Mac Pro with Leopard and a Dell

    I have posted this question in another forum, but maybe this discussion page is the better one for my question, especially in light of all the connectivity problems I'm reading about for people who have upgraded to Leopard -
    Can anyone suggest a good router to purchase that would work with no problems for a Mac Pro with Leopard?
    Or, the other side of the coin - what routers have you personally had problems with?
    I would be connecting to the router via an ethernet cable, but I'm looking specifically for a g and b router. I need to cover my roommate too - she has a Dell and she uses a wireless usb adapter to connect wirelessly. We have a modem (cable or DSL, I think?) and high-speed internet service.
    We were previously using a Netgear router, but suddenly it won't work for more than 10-15 min before it loses connection after we reset it. And this happened before I updated to the Leopard.

    Apple AirPort Extreme has served my mixed environment very well. You can buy a refurbished one from Apple and save some $.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=AA9 C1548&nclm=CertifiedMac

  • Xserve g5 with dell powervault 220s via scsi

    i have a fully working xserve g5. i recently added an adaptec scsi host adapter 39160.
    the box booted no problems and recognized a scsi controller.
    i want to attach a dell powervault 220s to this scsi controller and use it for external storage. I have the PV booted and connected using 1 scsi cable. to the xserve.
    when i try to boot up the xserve it grey screens saying to hold the power button.
    it does this every time. what do i need to do to get this system working?

    dang, what about an adaptec AIC-7899? should that
    work?
    Nope. Here's their announcement that Mac users can take a hike:
    http://www.adaptec.com/en-US/support/updates/mac_osxinfo.htm
    ATTO is pretty much the only choice with 10.4.x. A bit pricy, but it works fine in our Xserve G5.
    Russ
    Xserve G5   Mac OS X (10.4.7)  

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • How do I get Mac Pro with Lion Server to restart at a set time when users are connected?

    I have recently configured a Mac Pro with Lion Server, and have set it to restart automatically every morning at 3am. When I arrive in the morning, I notice that it has not rebooted, usually because it states there are users connected. Is there a way to automatically disconnect users so that the machine will reboot.  No one is ACTIVELY connected at this time of the morning, but may still be logged in somewhere. I did see where I can log out users after a set period of time when using Workgroup Manager to manage a computer or computer group, but I don't use the server to manage all of the computers that have users log in.
    Thanks!

    Well, it doesn't necessarily have to be each and every night, but it was for the sole purpose of preventing sluggishness. We had it set up before, as Snow Leopard Server and it would restart every night. It would occasionally be slow and need rebooting, however a manual reboot was not possible by most people in the store as they did not have credentials to screen share and restart it - which would result in holding down the power button to shut it down.
    The server is used for the sole purpose of logging in about 50 users just so they can customize their experience, as well as saving items to their own home folders.  The store is closed during the night, and there is no reason anyone would be accessing it during the night.

  • Very slow speeds with Mac Pro talking to a Ubuntu Raid Server

    So I have an environment where mainly macs and a couple Windows PCs use a Ubuntu Raid 50 file server. When attempting to access the server the Mac Pros take typically 1 minute to view the file structure and sometimes timeout, the Windows machines take about 1 second. Also this seems to affect copying and deleting which takes much longer from the Mac side. The server is setup simply with a samba mount to allow access.
    Any suggestions for how I can attack this issue? Any help would be greatly appreciated.
    Colin

    Nope. The Macs and PCs are on the same subnet and plugged into the same switch, from the wall.

  • Mac Pro with Server 10.8.5 Randomly Shuts Down

    OK all you really smart dudes ...
    I have a Mac Pro (2.8 GHz Quad-Core Intel Xeon) with 24GB RAM. We are running Mountain Lion Server (10.8.5) without problems until the last two weeks. "Out of the blue" in the middle of the day, it just turns off. We check on it and it is completely off and we have to restart it. Today it happened for the 3rd time ...
    I pulled the System Log from the Server App (like I would know what I was looking for) and saw some suspicious activity:
    Oct 24 01:20:36 [our server] sshd[75316]: Did not receive identification string from 212.129.39.8
    Oct 24 01:20:37 [our server] sshd[75317]: Invalid user oracle from 212.129.39.8
    Oct 24 01:20:37 [our server] sshd[75317]: input_userauth_request: invalid user oracle [preauth]
    Oct 24 01:20:37 [our server] sshd[75319]: in od_record_create(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75319]: in od_record_create_cstring(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75317]: Postponed keyboard-interactive for invalid user oracle from 212.129.39.8 port 62721 ssh2 [preauth]
    Oct 24 01:20:37 [our server] sshd[75319]: in od_record_create(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75319]: in od_record_create_cstring(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75319]: in pam_sm_authenticate(): OpenDirectory - Unable to get user record.
    Oct 24 01:20:37 [our server] sshd[75317]: error: PAM: unknown user for illegal user oracle from 212-129-39-8.rev.poneytelecom.eu via 10.0.1.254
    Oct 24 01:20:37 [our server] sshd[75317]: Failed keyboard-interactive/pam for invalid user oracle from 212.129.39.8 port 62721 ssh2
    Oct 24 01:20:37 [our server] sshd[75321]: in od_record_create(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75321]: in od_record_create_cstring(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75317]: Postponed keyboard-interactive for invalid user oracle from 212.129.39.8 port 62721 ssh2 [preauth]
    Oct 24 01:20:37 [our server] sshd[75321]: in od_record_create(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75321]: in od_record_create_cstring(): failed: 13
    Oct 24 01:20:37 [our server] sshd[75321]: in pam_sm_authenticate(): OpenDirectory - Unable to get user record.
    Oct 24 01:20:37 [our server] sshd[75317]: error: PAM: unknown user for illegal user oracle from 212-129-39-8.rev.poneytelecom.eu via 10.0.1.254
    Oct 24 01:20:37 [our server] sshd[75317]: Failed keyboard-interactive/pam for invalid user oracle from 212.129.39.8 port 62721 ssh2
    Oct 24 01:20:38 [our server] sshd[75317]: Received disconnect from 212.129.39.8: 3: com.jcraft.jsch.JSchException: Auth cancel [preauth]
    Oct 24 01:23:37 [our server] servermgrd[75310]: No requests in 300 seconds, shutting down
    Oct 24 01:28:20 [our server] sshd[75323]: reverse mapping checking getaddrinfo for nsg-static-198.107.71.182.airtel.in [182.71.107.198] failed - POSSIBLE BREAK-IN ATTEMPT!
    Obviously, this is not the entire System log ... and the above may not have anything to do with the mystery shut downs. So here is the code from immediately before the Shut down:
    Oct 24 12:26:39 [our server] bootpd[78181]: DHCP REQUEST [en0]: 1,d8:cf:9c:d4:99:5c <AndrewJnsiPhone>
    Oct 24 12:26:39 [our server] bootpd[78181]: ACK sent AndrewJnsiPhone 10.0.1.100 pktsize 338
    Oct 24 12:26:40 s [our server] com.apple.SecurityServer[19]: Succeeded authorizing right 'system.privilege.admin' by client '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] (2,0)
    Oct 24 12:26:40 [our server] com.apple.SecurityServer[19]: Succeeded authorizing right 'system.privilege.admin' by client '/Library/PrivilegedHelperTools/com.apple.serverd' [125] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] (100000,0)
    Oct 24 12:27:44 [our server] bootpd[78181]: DHCP REQUEST [en0]: 1,b8:e8:56:f1:b3:b5 <BenJohnnsiPhone>
    Oct 24 12:27:44 [our server] bootpd[78181]: ACK sent BenJohnnsiPhone 10.0.1.71 pktsize 338
    Oct 24 12:27:45 [our server] com.apple.SecurityServer[19]: Succeeded authorizing right 'system.privilege.admin' by client '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] (2,0)
    Oct 24 12:27:45 [our server] com.apple.SecurityServer[19]: Succeeded authorizing right 'system.privilege.admin' by client '/Library/PrivilegedHelperTools/com.apple.serverd' [125] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [132] (100000,0)
    Oct 24 14:32:48 localhost bootlog[0]: BOOT_TIME 1414179168 0
    Oct 24 14:32:48 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Oct 24 14:32:48 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Can anyone determine why it is shutting down and what I need to do about it? I have ALL the System Log for the day, if that would be helpful.
    Thanks.

    Make sure there are no scheduled shutdown events in the Energy Saver preference pane. If there are not, then see below.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Wil this Dell Display work with my mac pro ? standard graphics card

    http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=dhs&cs=ukdhs 1&sku=184923
    Above is the link to the one i want! will it work? i think yes but second opinion would be nice.

    It depends in part on what graphic card it is attached to. And if you have 2nd monitor.
    Mac Pro 2009 + OEM GT120 + Dell doesn't always work with the MiniDisplay Ports.

  • Is the dell S2240T compatible with mac

    Is the dell S2240T compatible with mac?

    The specs:
    http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&cs=19&sku=320-97 38
    only lists Windows 8 as being compatible. Unless you can find drivers that support OSX, the touch feature will not work.

Maybe you are looking for