Dell Precision Systems Failures
Environment - SCCM 2012 R2 using MDT 2013 and the Windows 8.1 ADK.
I have successfully deployed Dell Latitudes and Optiplexs without issue - using MDT Task Sequence and applying driver packages built using the Dell Driver CAB files for Enterprise Client OS Deployment. However, I have failures with both Precision models
I have tried to deploy - the M4700 and T3600. Both the smsts log and dism log indicate that the first driver injected to the offline image successfully but fail when trying to inject the second driver.
I tried to add the log files here, but ran into a body length issue.
I have requested the same help from the Dell Enterprise site - with the log files here:
http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19544668.aspx
Thank you for any help in advance.
It's not the driver. I have manually altered the driver package to exclude what was the second driver and it failed in the same location.
I tried an earlier CAB driver package for the same system and it failed - in the same location.
I tried a different model Precision with a different set of drivers and it failed - in the same location (on the second DISM injection).
Both M4700 and T3600 models are failing on the second DISM driver injection into the offline image, and they both seem to first fail on the second DISM injection with:
Failed to open the registry root: n/a, key: Microsoft\Windows NT\CurrentVersion\ProfileList. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
Failed to query for path to user profiles directory. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
Failed to load the default user profile registry hive. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
Thank you for your replies.
Similar Messages
-
Help me decide: HP 8570w vs MSI Quadro Workstation vs Dell Precision m4700
Hi,
I'm looking to get a notebook for doing video and photo editing using Premiere, PS, Lightroom, Illustrator, and some AE. All CS6. I'm hoping you hardware experts can help me out. The MSI seems the most affordable...
Can you help me decide between these notebooks?
Quadro:
http://us.msi.com/news-media/news/100083.html
GT60 0NG-294US
Intel® Core™ i7-3630QM Processor
Windows 7 Professional
15.6" Full HD Anti-Reflective Display 95% NTSC (16:9; 1920 x 1080)
NVIDIA® Quadro® K2000M (DDR3 2GB VRAM)
Full-Color Programmable Backlit Keyboard by SteelSeries
Killer™ E2200 Game Networking
MSI Cooler Boost Technology
2 x Premium Speakers w/ Subwoofer
750GB Hard Drive (7200RPM)
12GB DDR3 1600MHz System Memory
Blu-ray Disc Burner
USB 3.0 x 3; USB 2.0 x 1; HDMI; Mini-Display
Built-in 720p HD webcam
Audio Boost Technology
Jackson Peak 802.11 b/g/n WLAN
HP 8570w:
http://www8.hp.com/ca/en/products/laptops/product-detail.html?oid=5329162
Operating system: Windows 7 Professional 64 (available through downgrade rights from Windows 8 Pro)
Processor: Intel® Core™ i7-3630QM (2.40 GHz, 6 MB L3 cache, 4 cores)
Memory, standard: 8 GB 1600 MHz DDR3 SDRAM
Internal drive 750 GB 7200 rpm SATA
Display: 15.6" diagonal LED-backlit FHD UWVA anti-glare DreamColor (1920 x 1080)
Graphics: NVIDIA Quadro K2000M (2 GB dedicated DDR3)
Network interface 10/100/1000
Wireless:
Intel Centrino 802.11a/b/g/n
HP Integrated Module with Bluetooth 4.0+ EDR
Battery type:
8-cell (83 WHr) Li-Ion battery
Weight Starting at 3 kg
(Starting weight is with SSD and weight saver (no optical drive) )
Dell Precision:
http://www.dell.com/ca/business/p/precision-m4700/pd.aspx?c=ca&cs=cabsdt1&l=en&s=bsd&~ck=m n
Intel Core™ i5-3340M (Dual Core 2.70GHz, 3.4GHz Turbo, 3M cache, 35W)
Windows 7 Professional, No Media, 64-bit, English
15.6" HD (1366x768) Anti-Glare
2GB3 DDR3 SDRAM at 1600MHz
320GB 2.5" 7200rpm Hard Drive
8X DVD+/-RW Slot Load
AMD® FirePro® M4000 Mobility Pro Graphics with 1GB GDDR5
3 Year Basic Hardware Service with 3 Year NBD Limited Onsite Service After Remote Diagnosis
6.33 lbsUnderstated,
Sounds like you are in Canada.
Skip MSI; they have not been getting much of a reputation for solid, reliable, laptops for video editing.
Asus is selling rock-bottom priced laptops if you really need to cut cost to the bone.
My first choice recommendation would be to go with an ADK laptop. They are a audio/video editing centric company that has excellent laptops (Sager / Cleo platform) and excellent support for pretty decent prices on high-spec configurations. Unlike the HP/Dell laptops, their 15.6" 1980x1080 has expansion for multiple drives while retaining your optical bay.
HP and Dell are OK too, but more expensive for fully loaded configurations. Both companies provide a really nice base model, but then charge a lot for adding memory, drives, etc.
Dell provides really decent CPU choices, but you need to go to the "large business" section of their web site to see those CPU choices for the M4700.
If you go HP or Dell, get a newmodeus.com optical bay drive caddy to put a 2nd internal drive in your system. Buy the HP or Dell, then move the HD to the optical bay and buy a large SSD for OS, programs, and scratch/cache.
Regards,
Jim -
Dell Precision M4400 Windows 8.1 upgrade
I've been trying to upgrade my Dell Precision M4400 laptop to Windows 8.1 for hours now, with no success.
The installation completes, but right after loading the license agreement, the computer crashes with the infamous VIDEO_TDR error.
I had this problem years ago when I upgraded to Windows 7, and again with Windows 8.0. But I've always been able to at least boot to the desktop so I can turn off NVidia's lousy Powermizer "feature". With Windows 8.1, there's just no way for me to get that far. The laptop crashes, reboots, reverts back to Windows 8.0; leaving me annoyed, hopeless, and stuck trying again.
The VIDEO_TDR error has been a problem for several M4400 users for a while now; Dell needs to stop giving us to proverbial middle finger, and do something about it. After all, this was an expensive unit, and still has plenty of life left in it.
While I wait for them to get their act together. does anybody know how I can get Windows 8.1 into safe mode during the install process? (I tried holding shift and striking the F8 key during boot, but it just ignores me and continues the setup process)I ran into the same issue today when upgrading from Windows 8.0 Pro to Windows 8.1 Pro.
Here is how I managed to get through the upgrade successfully, maybe the description helps others:
On the old OS (Windows 8) open Windows Explorer and go to options
Enable all options to see hidden and system files
Keep Windows Explorer open
Open an elevated command prompt and run the following command:
bcdedit /set {default} bootmenupolicy legacy
This enables the legacy F8 boot option in case the VGA boot has to be enforced later on in the process
Start the OS upgrade process from the Microsoft Store
When being prompted to restart the computer DO NOT restart
Change to the Windows Explorer Window and find a folder called "$Windows.~BT" which contains the Windows 8.1 setup files
Within that folder navigate to the "DUDownload" folder and find the "DUDriverUpdates": C:\$Windows.~BT\DUDownload\DUDriverUpdates
Within that folder delete the compressed file and the GUID name folder
The contains the latest nVidia driver that causes the blue screen
Complete the restart as requested by the Windows upgrade routine
Windows 8.1 will install with standard VGA support only
Once completed log on and download the "Powermizer" tool from here:
http://www.box.net/shared/v7jpoateoq
Download the latest Windows 8.1 drivers from the nVidia web site for the 9600M GT card
Install the drivers (I only installed the core drivers and no add on software from offered by the setup)
Run the "Powermizer" tool from an elevated command prompt and disable the power saving optionRestart the machine immediately when suggested by the "Powermizer"
If the machine crashes just restart, log on and run the too again from an elevated command prompt again
If it continues to crash force a "low resolution" boot by hitting F8 at the beginning of the boot phase and run the tool after having booted with the VGA driver
I tested full HD (1080p) video playback in battery and AC mode as well as resuming from sleep without any issues.
Thanks to the ones that posted here I was able to get this issue solved:
http://en.community.dell.com/support-forums/laptop/f/3519/t/19448813.aspx -
Dell Precision 690 - Problem with Power On Button
Hi
Over the last week or so the power on button on my Dell Precision 690 is starting to get more difficult to press. Today I cannot power on PC as it has become completely jammed. It looks like I am going to have to remove it. Does anybody know exactly how to do this as its not in any of the users documentation.
Would really appreciate any help as I need to get PC back up and running.
ThanksWhew! That was some kinda mess.
Basically what had happened was that the button is all plastic, and the plastic acts as a hinge and spring to push the button "rod" to make contact with the actual teeny tiny little micro switch. I started taking parts out, in the same process you'd use to replace the system board (that's on an "assembly"). At some point it looked like I could wiggle one of the plastic face plates that frames the CD/DVD drives out, and then I saw there was a second plastic plate around the power button and system lights. I bent that da*&^%ed stupid metal face plate after finding there were still 2 more screws that I couldn't reach, just enough to slip out the second facing, and then put the whole thing back together again, without the button installed. With no faceplate over the power switch, you can take a pencil, and use the eraser side to click the power switch on.
The machine is really pretty long in the tooth now, so we'll be working on a replacement soon!
Still, if I had been able to easily remove the other large black panel, things might have gone a lot smoother... Lousy design for that particular part of the unit... -
Couldn't upgrade Solaris 10 x86 from Sun Fire x2200 to Dell Precision Wrkst
Dear Solaris Experts,
I need to clone a Solaris 10 x86 system using a ufsdump backup from the following source & target servers:
Sun Fire x2200 M2 with Quad Core Processor
# /usr/platform/`uname -i`/sbin/prtdiag
System Configuration: Sun Microsystems Sun Fire X2200 M2 with Quad Core Processr
BIOS Configuration: Sun Microsystems S39_3D12 10/06/2008
# uname -a
SunOS old 5.10 Generic_139556-08 i86pc i386 i86pc
to
Dell Precision WorkStation 390
# /usr/platform/`uname -i`/sbin/prtdiag
System Configuration: Dell Inc. Precision Workstation 390
BIOS Configuration: Dell Inc. 2.3.0 05/01/2007
# uname -a
SunOS 5.10 Generic_139556-08 i86pc i386 i86pc
Unfortunately, Solaris kept rebooting (failed to boot) from the restored primary disk (both / & /export/home) even though Grub menu appeared. As a result, I have embarked on the path of upgrading path using the same Solaris 10 Installation Disk (5/09) DVD but failed due to not able to mount / (c0t0d0s0), swap and /export/home (c0t0d0s7).
The source Sun Fire x2200 had two mirrored disks but I am restoring the backups to a single harddisk. Any idea on what step has been missed or that it is not possible to go down this path altogether.
I have tried a number of different reinstallations & restores but have not had much luck still.
Many thanks,
JackI should have searched the forums first. This was the solution to my issue....
http://forum.java.sun.com/thread.jspa?messageID=10249826 -
Dell Precision M3800 Performance Question
Hi Everyone,
First time posting here so excuse me for the simplicity of the question ad information that I am providing.
I have recently bought the DELL Precision M3800 Workstation
The specs are:
CPU: i7 4702HQ (2.2Ghz - 3.2Ghz)
16GB RAM
512gb mSata SSD
Win 8.1 PRO
The issue that I am having is speed. This is my first laptop with a solid state drive, and I was (possibly falsely?) expecting super fast speeds. To start with, the booting is very fast, (approx 7 seconds).
The problem is, installing, installing and launching applications.
I am currently installing Autodesk Maya 2015 and it is very slow. I have the file downloaded, so it is not the download speed, but its been going on for a good 15 minutes. This happens with all installations, Skype, AutoCAD, Photoshop etc.
If I open the task manager, It shows that the CPU is at 15% and the Disk is at 5%
None of my resources are utilised, while the programs are struggling to move progress in the installation.
It is similar with loading them. The time it takes to load up a program (installed on SSD) is the same as on my old laptop whin an i5 processor and normal HDD.
I guess my question is, is there any way to give programs more resources so they would react quicker, as the system is clearly capable of speeding things up, just the programs aren't using these resources.
Any and all ideas are welcome. If more information is required please ask.
ThanksThank you for your response!
I am aware that larger SSD's are slightly slower, but I have found the problem is not in the SDD itself.
I just ran CrystalDiskMark and here are the results:
Sequential Read : 380.107 MB/s
Sequential Write : 148.969 MB/s
Random Read 512KB : 457.497 MB/s
Random Write 512KB : 317.328 MB/s
Random Read 4KB (QD=1) : 31.679 MB/s [ 7734.2 IOPS]
Random Write 4KB (QD=1) : 74.453 MB/s [ 18177.0 IOPS]
Random Read 4KB (QD=32) : 383.831 MB/s [ 93708.9 IOPS]
Random Write 4KB (QD=32) : 95.720 MB/s [ 23369.2 IOPS]
Test : 100 MB [C: 28.8% (134.7/467.0 GB)] (x1)
Date : 2014/09/13 20:30:32
OS : Windows 8.1 Pro [6.3 Build 9600] (x64)
This confirms (in a way) that the SSD is capable of very high speeds compared to a standard HD. What comes to mind then, why would a 5gb installation take a good part of half an hour. As I've mentioned, in the task manager, the CPU, RAM and DISK never go
over 25% in usage during the installation.
Any Ideas? -
Hi, I’ve recently bought two : CT2571869 CT102464BF160B.M16FA2 8GB DDR3 UPGRADE FOR A DELL PRECISION M6600 (2 SODIMMS) SYSTEM As I installed them on my laptop (Dell Precision M6600 2 sodimm slots - 2012 ) it started to have system crash more times per day. Machine works and suddendly I get blue screen (SYSTEM FAULT IN NONPAGED AREA) or system completely locks.I also tried to install just one RAM (8GB) with the same result. Reinstalling the original RAM (2 x Samsung 2GB M471B5773DH0-CH9) , laptop returns to work well.I have run either the Dell memory tests and the Linux 'mem test', they cannot find any problem. I suspect that RAMs, differently by what you stated on your site, are not compatible with my laptop. What do you suggest ? There is a possible solution or I have to send them back ? Thanks, Mamas
Hello,
Thanks for contacting us today. It appears that the memory you purchased is correct for the Dell Precision M6600 and that we have had a very low return rate on this module. I would suggest checking to see if the system may be in need of a BIOS update. The system is a few years old and that can sometimes be the issue. If you are still experiencing issues, please give us a call. We would be happy to troubleshoot further and set up a return if necessary. Our contact information can be found in my signature.
-
Dell Precision M6500 Overheating issue\CPU Issue
I will tell you that M6500s run hot naturally, I have quite a few of these and the fans kick on all the time. Some of our users put them on cooling pads to avoid this issue. Generally if you have one of these machines, you are doing video rendering, CAD, other CPU-intensive applications. So what are you running? May very well be whatever application you are running has a process running in the background. Have you checked your msconfig and scheduled tasks? If it is running OK in safe mode sounds like you have something at startup that just wont stop using resorces (service or process). Check what is chewing through CPU in System Monitor, specifically which process. Also, might want to consider using updating graphics driver through the vendor (NVIDIA likely) and not just Dell. If everything looks good, Antonio is right, you just have...
So we have many of these Dell Precision M6500 Laptops. Most of them give no issue. But we have one that likes to overheat and slow its self way down.When I first got my hands on it, I wiped the computer and reinstalled Windows 7. But it was still bogged down so I decided to see what processes were running. Nothing out of the ordinary but somehow 78% of the CPU was still being used, which was causing the fans to blare and the entire laptop to get warm\hot. So I then booted it into safe mode. Ran just find then. Minimal delay on actions. So it was running exactly like it was supposed to. Then I booted back up into the OS and it was already lagging again. Ran Trend Micro titanium and it managed to speed up boot time by 5 seconds. Ran CCleaner but it didn't find much. Malwarebytes came up empty.So then I thought that maybe upgrading it to...
This topic first appeared in the Spiceworks Community -
Dell Precision M6600 laptop Certification for Oracle Enterprise Linux 5.5
Dear Experts,
Please share the certification for Dell Precision M6600 laptop with Oracle Enterprise Linux 5.5 (x86 64 bit) Operating System.
Please give it a high priority as this is a business critical requirement.
Thanks & Regards
Chetan Vithlani867508 wrote:
Please give it a high priority as this is a business critical requirement.
867508
Newbie
Handle: 867508
Status Level: Newbie
Registered: Jun 21, 2011
Total Posts: 1
Total Questions: 1 (1 unresolved)
Moderator Comment
To reinforce what was mentioned in the first response...
There is no "urgent" in these forums and your statement that everyone must jump to your request just because you say so is rude.
You have been a viewer of these user-to-user OTN forums for more than a year. That is far long enough to know better.
For the future, whenever you have a critical business need for information, you will need to use your support credentials and log a SR ro Oracle Technical Support. Be prepared each time to prove to them that such a need exists. -
Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
ShashiDear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar -
My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
Any help will be appreciated!
k.regards
RamonHi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
Is there at least a work around, until this big fix comes along?
k.regards
Ramon -
"HP AIO Printer 7180 " Ink System Failure- Worth Repair ?
Hi I have the above all in one printer. it is maybe 8 years old now but an excellent,top of the line printer at that time. I have gotten an " ink system failure" warning and nothing works. I have been told that this means the printer is basically shot-to chuck it-and buy a new one. Its such a nice unit, it seems a shame to not try a repair. my local printer repair shop in Vancouver -eltek- has quoted me about $50 to check it out and up to repair from there. I've heard that this is a common problem with this unit. Question- As I am Disabled , on fixed low income, can I attempt a self repair and if so , what can I attempt? Would it be worthwhile to pay for this problem repair or should I just write it off and save $100 for the newer type, disposable printers ? Thanks Most Kindly Brian Smith in North Vanc
Hey , Welcome to the HP Support Forum. I understand your Photosmart C7180 All-in-One Printer is stuck in an error state. I would like to assist you with this. According to this article from HP, the sole troubleshooting recommendation is performing a hard reset. Beyond that, I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Even though your printer's out of warranty, you might be able to look into alternative servicing or replacement options with HP. Addressing your questions about D.I.Y. repair and third-party servicing, I do have some advice that you may want to take into consideration. The printhead on your C7180 is fixed/permanent. This means you can't readily take it out and clean it or replace it like you can in other printer models. Is it possible to dismantle the entire unit and identify the source of the error status (likely the printhead) and repair it on your own? Maybe... but there are no official guides from HP that support this approach. With some research online (Google, cough, YouTube, cough ) you might be able to find tips on how to go about this, but we rarely advise this route as it can exacerbate existing issues or create new problems. Third-party repair businesses may have their own methods for fixing these types of printer errors, but I'm doubtful that they can guarantee a positive outcome, especially with this type of error. You can end up wasting money on a fruitless repair. We don't do pre-sales tips in the Forums, otherwise I'd recommend budget-friendly printers from HP that would match and in many cases exceed the capabilities of your C1780. If you do end of deciding to pick up a new printer you can checkout new HP models here. I hope this helps. Have a great day! -
SYSTEM FAILURE로 PO STAUTS가 INPROCESS 상태시 해결방법
제품 : MFG_PO
작성날짜 : 2006-05-17
SYSTEM FAILURE로 PO STAUTS가 'INPROCESS' 상태시 해결방법
========================================================
PURPOSE
Document approval manager가 fails 되어 down 되면 PO는 IN PROCESS 상태가
된다.이 PO에 대한 available한 workflow가 없고,reprocess 하기 위해
wfretry를 시도해도 실패한다면 아래 script를 이용한다.
(Oracle Purchasing - Version: 11.5.9)
Explanation
Document approval시 발생하는 Document Approval Manager crashing은 PO의상태를 IN PROCESS로 만드는 원인이 된다.
Workflow는 완전히 처리되지 못하고 workflow activities processes와
system 안에서 "lost" 상태가 된다.
이 때 wf_item_key는 어떤 active한 workflow와도 상응하지 못하기 때문에
불필요한 상태가 되어 버린다.
System crash로 인해 session variable data를 잃어버렸기 때문에 wfretry
를 실행해도 workflow는 restart 되지 못한다.
Solution :
아래 steps에 따라 작업한다.
NOTE: 이 script는 oracle의 승인 및 review 없이 사용할 수 없으며, 예산
계정을 사용하는 경우 사용할 수 없다.
1. Please run the following sql update:
-- START OF RESET SCRIPT
set serveroutput on size 100000
DECLARE
CURSOR potoreset is
SELECT wf_item_type, wf_item_key, po_header_id, segment1,
revision_num, type_lookup_code
FROM po_headers_all
WHERE segment1 = '&PO_NUMBER '
and authorization_status IN ('IN PROCESS', 'PRE-APPROVED')
and NVL(cancel_flag, 'N') = 'N'
and NVL(closed_code, 'OPEN') != 'FINALLY_CLOSED';
CURSOR maxseq(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code is NULL;
CURSOR poaction(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code = 'SUBMIT';
submitseq po_action_history.sequence_num%type;
nullseq po_action_history.sequence_num%type;
BEGIN
dbms_output.put_line('------------------------------------');
dbms_output.put_line('Data Manipulation Scripts Disclaimer');
dbms_output.put_line('------------------------------------');
dbms_output.put_line('As always please ask customer to run the scripts on their test instance first ');
dbms_output.put_line('before applying it on production. Make sure the data is validated for ');
dbms_output.put_line('correctness and related functionality is verified after the script has been');
dbms_output.put_line('run on a test instance. Customer is responsible to authenticate and verify ');
dbms_output.put_line('correctness of data manipulation scripts.');
FOR pos in potoreset LOOP
dbms_output.put_line('Processing '||pos.type_lookup_code||' PO Number: '||pos.segment1);
dbms_output.put_line('......................................');
dbms_output.put_line('Closing Notifications...');
BEGIN
UPDATE wf_notifications set status = 'CANCELED'
WHERE notification_id in (
select ias.notification_id
from wf_item_activity_statuses ias,
wf_notifications ntf
where ias.item_type = pos.wf_item_type
and ias.item_key = pos.wf_item_key
and ntf.notification_id = ias.notification_id)
AND NVL(status, 'OPEN') = 'OPEN';
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Aborting Workflow...');
BEGIN
WF_Engine.AbortProcess(pos.wf_item_type, pos.wf_item_key);
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Updating PO Status...');
UPDATE po_headers_all
set authorization_status = decode(pos.revision_num, 0, 'INCOMPLETE','REQUIRES REAPPROVAL'),
wf_item_type = NULL,
wf_item_key = NULL,
approved_flag = decode(pos.revision_num, 0, 'N', 'R')
where po_header_id = pos.po_header_id;
OPEN maxseq(pos.po_header_id, pos.type_lookup_code);
FETCH maxseq into nullseq;
CLOSE maxseq;
OPEN poaction(pos.po_header_id, pos.type_lookup_code);
FETCH poaction into submitseq;
CLOSE poaction;
IF nullseq > submitseq THEN
dbms_output.put_line('Deleting PO Action History...');
DELETE FROM po_action_history
WHERE object_id = pos.po_header_id
AND object_type_code IN ('PO', 'PA')
AND object_sub_type_code = pos.type_lookup_code
AND sequence_num >= submitseq;
END IF;
dbms_output.put_line('Done Processing.');
dbms_output.put_line('................');
dbms_output.put_line('Please issue commit, if no errors found.');
END LOOP;
END;
-- END OF RESET SCRIPT
2. If the above sql update completes without error the please issue a
commit:
commit;
If the above sql update errors then issue a rollback:
rollback;
3. When the above sql updates are complete, then query up the purchase
order in theEnter Purchase Order form and resubmit the document for
approval.
Reference Documents
Note 297980.1 -
I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
C5180 Ink System Failure hp 0xc19a0024
Hello Everybody,
Recently I moved from one city to another. After one week of that I run my HP C5180 printer. Unfortunately I have until today an error: "Ink system has failed. Refer to printer documentation. Error: 0xc19a0024. Turn power off then on again."
Of course I didn’t find any information in my documentation. Also turn off and on didn't help.
After reset this error (using Manufacturing Key Combo) I can “Print Report” but page is empty.
Full reset to the manufacturing settings don’t help. After “Tools/Clean Printhead” or “Tools/Align Printer”... ERORR 0xc19a0024 appear again.
I called to the HP support, but the printer is out support and I didn’t get answer what this error mean.
I will very gratefully if somebody explain me what the error 0xc19a0024 exactly mean. Any solutions of my problem are also very welcome.
Thank you!Hi andy_b23,
Sorry that did not help, the 0xc19a0024 is an Ink System Failure message. If the guide did not resolve your issue, then the next best option is to please call our phone support at 800-474-6836 for your upgrade/replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Maybe you are looking for
-
Unable to join network after 3.0.1
I "upgraded" my iPhone from 3.0 to 3.0.1 last thursday and since then have been unable to join any of my wireless networks. I've been able to join all of these networks via my laptop so I know it isn't the APs. I reset the network settings on the pho
-
Adding new field in the table for Output
Hi , I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done? regards, Ragu
-
HT5035 How can I tell when an iTunes card was redeemed?
I am trying to determine when an iTunes gift card was redeemed, but I don't see the activity on my account. Is it possible to tell when it was redeemed?
-
...
-
I've got a PDF that seems to open OK in Illustrator, it was originally produced by a CAD program: http://www.bavariayacht.info/downloads/Schematic%20Panel%2020.pdf However, none of the text is rendered as text, instead each character is made up of a