Dell printer driver download not running. Seems like it downloaded. but won't run

Download ran for 5 minutes . Said it "stored" it on computer. Click on file to run. Says no file available.
Also, why can't updates just run like they did on Internet Explorer instead of being held to run later?

Click here and follow the instructions.
(46273)

Similar Messages

TS3002 My macbook pro 4,1 runs os x 10.6 but won't run my apple usb superdrive. One forum said that this is due to os x, not hardware. The terminal commands given were for Lion, but don't work in snow leopard. Help!

My macbook pro 4,1 runs os x 10.6 but won't run my apple usb superdrive. One forum said that this is due to os x, not hardware. The terminal commands given were for Lion, but don't work in snow leopard. Help!

I was able to get it to work!

Mountain lion installer tells me that my Macintosh HD drive is not formatted to mac os extended, but I am running SL 10.6.8-iMac 2010

Thanks for any suggestions...iMac 2010 SL 10.6.8 trying to install ML 10.8.2 At the start of the installation(using downloaded installer from App Store) the installer advises that the Macintosh HD is not formatted as Moc OS Extended and directs me to aDisk Utility to do this .. surely this would format the drive and possibly do a Clean install ...which I not want to do..Is there a way to get round this issue?

Get a blank powered external drive equal too or slightly larger than your internal boot drive
Download a copy of Carbon Copy Cloner
Use Disk Utility to Erase the drive using the Middle Secure Erase selection and wait. until finished (may take hours)
Format the external drive Partition: 1, Option: GUID and Fomat: OS X Extended Journaled
Use CCC's default settings and clone your internal drive to the external one, may take hours.
When it's done, hold the option key down (wired or built in keyboard only) and reboot the computer, a screen pops up with bootable options, select the clone drive and check it out for some time.
Run Disk Utility from the clone and select the Macintosh HD partition and Partition: Format: OS X Extended Journaled and click apply, it likely will moan about this will delete all your data (it will)
Next click the Erase tab and use the middle secure erase option and click apply, wait it out again.
When that's finished use Carbon Copy Cloner to reverse clone the clone back onto the internal drive.
(note: in the future you can eliminate the secure erase steps and just click normal erase, as the bad sectors will have been already mapped off by the drive firmware)
Most commonly used backup methods

How to get print driver in 9 to behave like print driver in 5?

Hello,
I'm working in an XP shop with some legacy applications. One of these applications prints out batches of files to the PDF Writer printer from Acrobat 5.0. The files all come out with a similar filename pattern. For example, if the input was "Filename" and there were 3 parts to the batch, the output would be FILEN001.PDF, FILEN002.PDF, FILEN003.PDF, and so forth.
We're moving to new hardware running Windows 7, and unfortunately we have to keep this legacy app around for a while. The Acrobat 5 printer driver will not install on Windows 7. I've downloaded the trial for Acrobat 9 Pro, but I can't seem to get the 9 printer driver to work the same way.
Anybody know a solution?
Thanks,
Alex Seigler

Try the forum for Acrobat SDK.

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

Printer driver was not installed. operation could not be completed

Adobe Acrobat 9.3.1
windows XP system.
Cannot add the Adobe PDF printer get the error message:
Printer driver was not installed. operation could not be completed
Software installs/repair try to install the Adobe PDF printer but they do not. No error message; just that the Adobe PDF printer does not show up
I tried adding the Adobe PDF printer manually.
The drivers start to load and then fails giving the error message in the subject line.
I cleared the print spoolers and rebooted.
I have uninstalled Adobe Acrobat /rebooted/reinstalled. Install says it adds the Adobe PDF printer but nothing happens.
Problem exists for all users including Administrators.
I have renamed the C:\WINDOWS\system32\spool\drivers\w32x86 and C:\WINDOWS\system32\spool\drivers\Printers folder.
Both are recreated when I try to reinstall the Adobe PDF Printer.
I can add network printers with no errors.
I have cleared Adobe PDF printer from registry. e.g.:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\Adobe PDF Converter
I even imported Adobe PDF registry entry from a working system taking care to adjust the system values accordingly.
I also verified permissions for registry keys and application/driver folders were set correctly.
I have completely reloaded the installation software and imported the Adobe PDF drivers from a working system.
Not sure if this an Adobe issue, but that appears to be the only printer I cannot re-add.
Any constructive ideas on what to try next would be appreciated.

When I upgraded to Reader 9.4 I lost all ability to print Adobe pdf's. Finally uninstalled 9.4, re-installed 8.2, changed the filename "high quality.joboptions" to "Adobe PDF converter.joboptions" and was back in business. Pretty screwey fix, but after getting no help from online chats with Adobe and a day's lost work I was happy to have it.
[email protected]

When I installed Acrobat 9, the Adobe pdf print driver did not install

When I installed Acrobat 9, the Adobe pdf print driver did not install

Might depend on the OS that you did not mention. Try doing the updates and see if that solves the problem. Otherwise, tell us more about your OS.

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

I install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen

i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need help

First boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao.

Athough there is not much usages in the CPU , but the Fan runs really hard and loud , and i've ready try to reset the SMC ! i don't know what to do !

Athough there is not much usages in the CPU , but the Fan runs really hard and loud , and i've ready try to reset the SMC ! i don't know what to do and i'm very worried.

Nguyen Phuc wrote:
Athough there is not much usages in the CPU , but the Fan runs really hard and loud , and i've ready try to reset the SMC ! i don't know what to do and i'm very worried.
I suspect you didn't reset it right.
Turn off the machine, let it charge up and then try the SMC reset again.
https://support.apple.com/kb/HT3964
Run a Hardware Test
https://support.apple.com/kb/ht1509

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.
How do I reach tech support?

http://forums.adobe.com/message/5506764#5506764

Hi - Have a Javascript (search) that was ok thru 9, but won't run in X. Thank you.

Hi - Have a Javascript (search) that was ok thru 9, but won't run in X. Thank you

Quoting the Acrobat X SDK:
Changes to search object
The following changes have been made to the "search" object properties:
● The thesaurus and soundex properties have been removed
● The legacySearch property is now deprecated and always returns false.
Changes to SearchExecuteQuery
The following have been removed from nWordOptions parameter of SearchExecuteQuery:
● kWordOptionSoundsLike
● kWordOptionThesaurus
The function SearchIsLegacySearchAvailable has been deprecated and will always return false.

New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating. I had not set up Time Machine until today so I can't go back, or can I. I am a new Mac owner so please be gentle.
Thanks

The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
1. Open System Preferences > Print & Fax
2. Move the mouse over the Printers list.
3. Hold down the Control key and then click the mouse
4. Click on the 'Reset printing system' pop-up
5. Close Print & Fax and restart your Mac
This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Print Driver Settings Not Saving at Print Dialog [IDCS3, Vista]

Hi. On our only design machine that runs Vista, when the user tries to print something from InDesign CS3 and has to turn on duplexing in the printer driver setup, on clicking OK, those settings immediately go away, and thus the document will not print duplexed. It works fine on our XP machines.
A workaround is to set such printer driver settings via Vista's Control Panel, and this does work, however it's a bit cumbersome, since we print all kinds of documents.
Pertaining Specs:
- Adobe InDesign CS3 (5.0.3) for Windows
- Vista Home SP1 (I think)
- Konica-Minolta Bizhub C500
- EFI Fiery 2.01 Driver for Vista / PostScript / Image Controller 405
It's similar to this issue, but the specs differ:
Michael C Stone, "Indesign documents reset printer settings IDCS2 XPSP2" #, 14 Jun 2008 5:19 pm

It does say, "Double-sided: Yes," in Windows' printer properties for the Bizhub PS (and PCL) Fiery driver(s) -- in fact, this may have been from me turning it on for the PS driver in Windows Registry, as it was off for some reason, but seemed to make no real difference anyway -- but I think the duplexing option would have been grayed-out in the Fiery driver's dialog if not available as some various other options are -- the driver has the capability to poll the device for such options availability -- and I don't actually see anything duplexing-related on the Installable Options tab, but the Installed list is identical to one of our XP computers with no apparent issues with printing to the drivers from InDesign -- although at one point, if a Vista user printed an InDesign document and saved it (and thus the printer settings), XP users for some reason couldn't print the document without forcing a change in the print driver settings, but I believe this was due to using the same drivers but different TCP/IP port configurations per machine (Vista doesn't need the IP_ prefix as XP seems to).

Dell printer driver download not running. Seems like it downloaded. but won't run

Similar Messages

Maybe you are looking for