Dell Remote Control - What wrong?

Hello, my English is not very good, but I would like to ask.
I have a dell xps 16 and irda remote control. I do not know him to run.
Any ideas?

What do you want to use the remote control for? Pause/play during music/video?
Anyway, the LIRC project is to support remote controls in Linux..
More info: https://wiki.archlinux.org/index.php/LIRC

Similar Messages

How can I remotely control what iTunes song my iMac is playing to multiple AppleTV's?

So I own an iMac that has homesharing enabled. I then tell the iMac to play to both of my AppleTV's by holding OPTION key down while clicking on Airplay, and checking off the devices that I want it to stream to filling my home with sound that is in sync in every room. Works beautifully. Only problem is that I can not then control the iMac remotely from let's say the bedroom to pick a new artist. The ATV's become dumb clients simply playing what the iMac is pumping to them. Is there a remote interface that allows me to control iTunes on the iMac to choose the sounds being broadcast to the other Apple devices?
NO. VNC is a ghetto work around to accomplish this. Yes, I could do that, but it is inefficient, and inelegant. I am looking for a remote control app with the functionality that allows me to connect to and see the device that I want to control, and then by choosing my iMac, see all artists/albums/songs, play them and let the iMac pump the tunes to the devices that I told iTunes to Airplay to.
Ideally, the AppleTV's should know that they are acting as clients to the iMac serving centrally, but when I pick up an AppleTV remote, it overrides the stream from the iMac, and then the ATV begins streaming independently from the other. I KNOW there is a solution to this...
Any suggestions?
Thanks!
Adam

ok... solved it. By using the Apple Remote app, you can tell the app to control your iMac (I did not know that) and that solved the issue. Now the iMac plays the song I want to all of the devices that I told the iMac to play to. Perfect.

Remote control plays wrong track!?

hi, i have set up a DVD with four buttons playing 4 tracks, each of which has 1 chapter (or clip) and returns to the menu after playing. after i've burned the DVD and placed it into the DVD player, pressing the numbers 1 through 4 however causes the wrong tracks to play: for example pressing "1" plays track 1, pressing "2" plays track 3, "3" plays track 4, and "4" plays track 2!
I originally had the tracks arranged differently, where in the menu button 1 one was actually playing track 4, for example. but when i noticed this problem i went back and set it up so that track one contains clip 1, 2 contains 2 etc. hoping the problem had something to do with that.
it did not solve the problem...
can anyone tell me what i am missing here? i simpy want to have each corresponding track play accordingly when i click its number on my remote...
thx in advance for any help!
frank

so the final question then is are all the assets in different tracks, and if so, what order are they in when you look in the outline view (top to bottom)?
ok, in outline view all tracks align (1-4) vertically, and each opens the appropriate asset in the track wiindow (bottom middle) when highlighted. so all seems logical right?
so i burned another one (fresh build - no recycled versions) and stuck it in the player - what happens? whn i am looking at the menu, and press "2" the dvd plays track 3... same problem, but check this out:
if i am watching one of the tracks (say 1) and i press number 2 on the remote the dvd jumps to track 2 (i.e. NOT 3) as it is supposed to... this works for all the other tracks also)
so it seems the incorrect jumping occurs only from the main menu.. though as far as i can tell that is clean. BTW this time i deactivated "auto assign" in the Menu> Settings pulldown before the build)
hmm

Zfd4.01 remote control via desktop4.exe. What rights are needed?(repost, seems to have been stuck in wrong thread)

Hi.
Trying to give some non-admin users the right to remote control workstations via the user object. I have followed the tids/documentation for
this when using ConsoleOne and that works just fine.
When trying to remote control a user object with desktop4.exe (dopps zenwsbrowser actually) there seems to be some rights missing. Making the
user into an admin solves the problem and until the remote controlled user changes IP on his workstation it keeps on working even when removing
admin rights.
So the question is simply put:
What rights is needed on user AND workstation objects to remote control with desktop4.exe? Or if someone knows how I can check what attributes
has changed on a user after a remote control has been performed that would be sweet too.
/anders westerberg

Anders,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT1947 "Up next" feature makes a mess out of controlling what the heck is played using the iOS remote app.

Tell me if I am wrong, but it seems to me that the "Up next" feature makes a mess out of controlling what the heck is played through the Apple TV using the iOS remote app. The whole thing seem uber-anti-intuitive. I am a long time user (as much and anyone is long time for any of this stuff) of the iOS remote app, and ATV to play music though a stereo system. Up to a couple of weeks ago, I could sit in my chair, start the iPhone remote app, pick a playlist and either start from the beginning, or if the first track didn't grab me at that moment, go ahead and switch to, say, track 6 -- the whole playlist would "sit there" and be available for further browsing. With the new system, if I hit a playlist the songs will go into "Up Next". If as I described in the last sentence, the first song is not getting it for me, and I switch to track 6 , the "Up Next" list is lopped off and only tracks 7 onward will be shown. I can't go back and browse the first 5 tracks (6 actually) -- they're vaporized. The idea of browsing your own music has been killed; I guess this "Up Next" concept is for folks who like maybe a couple of dozen songs that are picked from different places and want to play them in different orders of something -- it just seems like a crummy idea. If under the scenario I described I want to go back and play that first (or second through fifth) song on the original playlist, I have to go out and fish it out of the library somehow and just keep messing around and around. There have been times when I didn't know what the heck was going to come out of the speakers. It seems like the remote user has not been considered in the "dramatically improved" iTunes 11", with the "cleaner user interface" . To me it is "dramatically akin to dog-doo", which, of course is not cleaner than much of anything. If I can't get this working decently, then I'm really thinking of investigating some other type of system like DLNA. Any suggestions?

Same problem here. I have so many problems with this remote app. Is there an iTunes API? I would like to write my own remote app that actually works.

The download of icloud control panel v2.0 does not work. I have no box to check for calendar and contaks. Whats wrong?

The download of icloud control panel v2.0 does not work. I habe no box to check for calendar and contacts. Whats wrong?
Thanks Chris

Hi, I came across the same problem and was not able to open any iCloud folders on Outlook, and iCloud was continusly asking to repair the iCloud Control Panel. Got the issue fixed by following the steps on the link http://somanytips.com/fix-icloud-error-repair-the-icloud-control-panel-to-use-ic loud-with-outlook/

TS1741 what is battery number for the remote control for apple TV

What is the battery number for the remote control for apple TV

Hello,
should be CV2032 or BR2032.
Hope that helps.
Cheers

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

What is the code for a proscan tv-dvd for a sony rmt-d197a remote control

trying to program a sony dvd remote to turn on and off my proscan tv-dvd combo. the dvd no longer works. is that possible and what is the code for e proscan tv dvd combo?

Unfortunately, the RMT-D197A remote control is not programmable. It only works with the DVD player it comes with.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

What rights are needed for remote control

I have a user that I want to allow remote control rights for a group of
classroom PC's. What rights do I need to give her and where do I apply
them? I have read TIDS that tell me I have to give rights at each
workstation object which I find hard to believe as its so time consuming!
Thanks in advance
Hazel

> On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
>
> > I have read TIDS that tell me I have to give rights at each
> > workstation object which I find hard to believe as its so time
consuming!
>
> depends.. if you have not eDir that's the case..
>
> but take a look at tools zenworks remote operators... which will help
you a
> lot in this case...
> --
>
> Marcus Breiden
I have edirectory and imported workstations etc .. running zen 4.1 .. I
just cant seem to figure out how to give this user rights to remote
control only one classroom.
Hazel
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

What does remote control volume control do?

What does the volume control on the remote do?
About 6 months ago I successfully changed my remote to operate the TV. Today I reset the remote (by pressing #* and on/off button) so that it doesn't affect the TV. In this mode, should the BTVision remote control do anything (it doesn't seem to!)? I thought that it would increase/decrease the output of the BTVision box so that I would have two methods of controlling the volume - one by using the BTVision remote, and the other by using the TV remote.
Solved!
Go to Solution.

Nope -- either programme it to operate the TV sound as before or leave it to do nothing.
Some devices do work the way you would like but not the Vision box.

What remote controls will work with the iMac 27inch.

Okay I hung the new iMac on the wall in my kitchen. Used the apple adapter I have a little apple remote control that works the dvd player fine. Of course the wireless keyboard and the wireless mouse work fine. I have an elgato tuner because this iMac is my dvr/tv does anyone have a remote that will work the iMac as a dvd and work the elgato hybrid tuner. Just trying to make this simple. Thanks

iTunes itself, that is it's built-in remote speaker function, will work only with an Airport Express. There may be other wireless speakers that have their own drivers or transmitter; someone else here may be able to make a recommendation.
Message was edited by: Dave Sawyer

The remote controls stopped working

I bought with an official Apple dealer the new i Pod Shuffle (generation 3) to use during my bike rides. After the first ride the remote controls stopped working and the voice over feature spontaneously started repeating the songs title. As well the volume control stopped working altogether. I didn't have time to return the Shuffle after only a week so I disable the voice over feature and keep on using my Shuffle with no volume adjustment, fast forward etc ….
After a visit to the Apple website I saw that several owners complained about this problem and assumed Apple would know about it and be ready to offer a fast solution. So picked an official Service Center as close as possible from my location.
First shock the Service Center was dirty, the paint obviously several decades old and faded, the light kept to the minimum.
Second shock not Tech on duty to check something as simple as a headsets. I realized there was no way to have a fast resolution to my problem. The Shuffle will be send to a regional repair center, I could have save the trip and just go to an Apple dealer. What the use to have Service Centers if they don't provide service?
Now when a product is returned, after 25 days of ownership (can't say use), a product designed by a company with the reputation of Apple you expect some kind of sign that the company is sorry, stands behind it's product and will do all possible to solve the problem. WRONG.
Third shock. The person who took my Shuffle obviously never saw a Shuffle generation 3 before or even knew it existed. She explained over and over that I may (but it sounded more like I will) be charge for the repair. Even asked me to pay upfront a basic fee to cover the time of a Tech checking on the product. And that the Tech will give me a quote if I am to be charged. Furthermore She found tons of reasons why eventually I would be charged to repair the product, however no technical person ever checked on the product. Well I guess only users read messages on Apple website not employees of Apple.
So what now? I am suppose to receive an E-mail in 24 hours to 5 working days, in which I'll be explained the result of the Tech investigation.
I guess most owners of Apple products have a better experience with the Customer Service or where the reputation of Apple being a “cool” company comes from? But based on my experience it looks like Apple's products and Apple's Customer Service may not meet Apple's reputation or customer's expectations. Or am I asking for too much?

I seriously doubt you were at an Apple Store and you were not dealing with Apple employees. You were dealing with a 3rd party shop that does work on Apple products.
Don't know where you are located but you could contact Customer Service at Apple and complain but they are somewhat limited it dealing with a 3rd party company. But they will at least have you complaint on file. Or you could attempt to find an actual Apple Store and take your Shuffle there. Or you could try one of the workarounds listed on the threads here.

Remote Control and error 1456

We are having a Remote control issue with more and more PC's. If they are
logged in, we can remote control them. If they have bee restarted and are
waiting to log in, then we can not remote control them. We Can use
diagnostics on them though....
Zen 4.01 ir7 is where we are.
We are also having an issue where many times after imaging, the ISD is not
populated into windows, and gets associated with our Image PC's workstation
object. If we clear the ISD, delete both workstation objects, and reboot the
target PC, it does re-import correctly. The remote control issue does not
get fixed when this happens though....
I have seen that rmerrorlog.txt has been asked for in the past to help solve
this issue, so We are including that. Any help in resolving what we have set
wrong is appreciated.
Thanks,
Mark Waters, CNA
John Evans, MCNE
Systems Group
Housing and Food Services
Michigan State University
watersmd at mail dot hfs dot msu dot edu
1st attempt to remote control target PC was not Logged in. It Failed - Error
1456.
2nd attempt was when target PC was logged in. It Worked.
PC with ConsoleOne - A004686
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
returning -201
#(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
Successful!!!
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
#(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out WallPaperRequest
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
Startreceiving event
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread : Received
Startreceiving Event
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
Command
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of did->DrishtiType
sent to Agent is 1
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
Packet succesfully
#(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
reallocation
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
event
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
ReceiveData(For Header) is -1
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of StartReceiveThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
HandleRCSession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
Target PC - A003514
#(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
operations disabled.
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 0, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 1, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for master replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
server
#(768)# 11:45:47 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading boolean
attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
user:, tree:HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
'z_Global Workstation Package:General:Remote Control
Policy.WorkstationPackages.Workstations.UHsg.HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
#(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
active...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : 0
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
over...
#(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
#(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
successfully
#(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed RcAgent.DLL's
Init Proc Address
#(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
#(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
#(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
#(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
#(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote Control
session for P1.
#(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
#(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
#(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
#(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
ESC_START_VIEWING_DARPAN Successful
#(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
#(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
#(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
#(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
returned. Closed thread is = 1
#(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
session is set
#(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in send
thread
#(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window. Calling
CloseConnection().
#(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
#(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
#(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
#(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
#(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
hAcceptThread Signals
#(768)# 11:47:12 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
successfully unloaded from memory
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory ...
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory and it is forcefully unloaded...
#(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
#(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin

Delete a few test workstation objects. Delete the object that was created by
the Image PC. Run DSREPAIR. Disable windows firewall. Reboot the PCs. Check
if the Workstation objects are created and if you can remotely control
them.
"Mark Waters" <[email protected]> wrote in message
news:[email protected]...
> We are having a Remote control issue with more and more PC's. If they are
> logged in, we can remote control them. If they have bee restarted and are
> waiting to log in, then we can not remote control them. We Can use
> diagnostics on them though....
> Zen 4.01 ir7 is where we are.
> We are also having an issue where many times after imaging, the ISD is not
> populated into windows, and gets associated with our Image PC's
> workstation
> object. If we clear the ISD, delete both workstation objects, and reboot
> the
> target PC, it does re-import correctly. The remote control issue does not
> get fixed when this happens though....
> I have seen that rmerrorlog.txt has been asked for in the past to help
> solve
> this issue, so We are including that. Any help in resolving what we have
> set
> wrong is appreciated.
>
> Thanks,
> Mark Waters, CNA
> John Evans, MCNE
> Systems Group
> Housing and Food Services
> Michigan State University
> watersmd at mail dot hfs dot msu dot edu
>
>
> 1st attempt to remote control target PC was not Logged in. It Failed -
> Error
> 1456.
> 2nd attempt was when target PC was logged in. It Worked.
>
>
> PC with ConsoleOne - A004686
>
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
> returned FALSE
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
> returning -201
> #(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
>
>
>
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
> Successful!!!
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out
> WallPaperRequest
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
> Startreceiving event
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread :
> Received
> Startreceiving Event
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
> Command
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of
> did->DrishtiType
> sent to Agent is 1
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
> Packet succesfully
> #(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
> reallocation
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
> event
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
> ReceiveData(For Header) is -1
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of
> StartReceiveThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread
> terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
> HandleRCSession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
>
>
> Target PC - A003514
>
> #(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
> operations disabled.
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 0, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 1, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for master replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
> server
> #(768)# 11:45:47 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
>
>
> #(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading
> boolean
> attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
> user:, tree:HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
> 'z_Global Workstation Package:General:Remote Control
> Policy.WorkstationPackages.Workstations.UHsg.HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
> #(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
> active...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : 0
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
> over...
> #(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
> #(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
> successfully
> #(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed
> RcAgent.DLL's
> Init Proc Address
> #(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
> #(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
> #(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote
> Control
> session for P1.
> #(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
> #(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
> #(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
> #(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
> ESC_START_VIEWING_DARPAN Successful
> #(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
> #(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
> #(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
> #(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
> returned. Closed thread is = 1
> #(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
> session is set
> #(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in
> send
> thread
> #(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window.
> Calling
> CloseConnection().
> #(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
> #(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
> #(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
> hAcceptThread Signals
> #(768)# 11:47:12 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
> successfully unloaded from memory
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory ...
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory and it is forcefully unloaded...
> #(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin
>

Confilicts with XP "Remote Desktop" and ZFD4 "Remote Control"

He have a similar problem like this. Some machines, after installing Zen4
agent, after first login, the WS reboot automatically every time.
He have discovered a conflit with display adapter ( Intel eXtreme graphics
2 ).
Resolution: With workstation at CTRL+ALT+DEL or password prompt, access
the registry of this machine with a remote admin WS. At the
HKLM\Software\Microsoft\Windows\Current Version\Run commands, find startup
tools from the display adapter, like HotKeysCmds -> C:\Windows\System32
\hkcmd.exe and remove them from registry.
Logon at the WS and if it run fine, reinstall the display adapter.
I hope this help you.
Regards,
BJ
> Current workstation Configuration - WinXP(SP1), Client32
> (483sp1),Enabled
> Microsoft Remote Desktop (Used to connect to machine via NAT at
> Firewall),
> ZFD4 at server. I installed ZFD4 management agent as local
> administrator
> with no problem. However on initial reboot, the machine would not
> boot
> normally and was stuck in a reboot loop. I was able to oot into safe
> mode
> however, unable to un-install the ZFD4 remote agent.
>
> 1) Is there some type of conflict between the two "Remote Control"
> applications.
>
> 2)How do I correct the current reboot loop.
>
> 3)What is the best scenario to remote control a desktop via VPN or
> NAT,
> keeping in mind that I may not have the Netware Client loaded on all
controlling workstations.
>
>
>

I'm not sure if Apple Remote can, but
Microsoft offers a free program called Remote Desktop Connection so you can do just that.
www.microsoft.com/mac

Dell Remote Control - What wrong?

Similar Messages

Maybe you are looking for