Dell server hardware component monitoring with scom 2012 R2.

hello ..
We have some dell poweredge r710 SFF 2X SIX CORE X5 SAS Servers ,I need to monitor its hardware components with scom2012 R2.I have installed os:windows server hyper-v server on this and windows server core OS management packs on scom and monitoring
working fine .next I want to know their is Latest Management pack available for this dell model server and what are hardware components can be monitored with scom 2012 R 2. I want to monitor Hardware failure such as Power failure ,cpu failure,disk
failure and NIC failure etc
Thanks
Richa

Hi,
Please refer to the User’s Guide of the DELL MP:
http://support.dell.com/support/edocs/software/smconect/msscom/40/en/ug/pdf/Dell_Server_Management_Pack_Suite_v4.0_UG.pdf
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Meanwhile, considering this is related to DELL products, if you need more information or further investigation, please also contact DELL support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Exchange 2010 and 2013 Monitoring with SCOM 2012

HI all,
I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring first

There are no dependencies on the 2010 MP so you should be good to go, see the following:

Weblogic Monitoring with SCOM 2012

Hello,
I need to monitor WebLogic 10.3 installed on Windows Server 2008 SP2 so I added these MP :
Microsoft.JEE.WebLogic.Library.mp
Microsoft.JEE.WebLogic.10gR3.mp
Microsoft.JEE.Library.mpb
Microsoft.JEE.Templates.Library.mpb
And I created a specific basic account (with administrator application rights) that I linked to the JEE Monitoring Account Profile.
I checked in the Event Viewer and I got : Event 1109 - All credential references resolved successfully.
But when I can't see anything in the Weblogic Application Servers specific views. And in the Heath Explorer of my server I have this :
For information, I don't get any error in the event viewer about this.
Can someone help ? Thanks.

1) What is the exact version of WebLogic that you're installing?
WebLogic Server Version: 10.3.0.0
2) In the WebLogic installation root, there is a registry.xml file. What is the version
listed for the Xpath: /bea-product-information/host/product/release?
<release level="10.3" ServicePackLevel="0" PatchLevel="0" Status="installed" BeaProgramGroup="Oracle WebLogic" StartMenu="C:\Documents and Settings\All Users\Start Menu\Programs"
InstallTime="Oct 17, 2008 5:10:52 PM" InstallDir="D:\bea10.3" JavaHome="D:\bea10.3\jdk160_05" JavaVersion="1.6.0_05" JavaVendor="Sun">
3) In the domain, is there a domain-registry.xml? If so, what are its contents?
In the domain, domain-registry.xml is missing.
4) Are there managed servers on that WebLogic domain & the same machine? If
so, have they been discovered?
Yes there is a managed server on that Weblogic domain on the same machine, no it hasn't been
discovered.
5)
What do you mean by "There is no monitoring of Weblogic admin servers". Here the monitoring needs of our application admin :
connections per application
Weblogic server status (running / problem /other)
JVM Memory
6) You mentioned that you enabled unit monitors, can you clarify specifically which unit monitors you enabled?
7) Have you tried the PowerShell script yet & did that work?
Not yet. I will try.

Monitor IBM x server hardware component runing Linux

We’d like to monitor IBM x server hardware component, we knew there is a IBM MP.
However, the official document said:
“Extensive monitoring of the health of hardware components for IBM System x servers and BladeCenter x86/x64 bladesrunning Windows”
My customer is running Linux on x servers, so this MP does not support it?
Does anyone know how to monitor hardware components of x servers running Linux? (any other MP or workaround is appreciated, thanks)

I've seen this lockup several times, when this happens, X aborts and tries to restart itself several times (actually gdm does it), and I won't get in X until I reboot the whole system.
I haven't seen this with the xorg-server from testing yet, but with 1.4.2 I could reproduce it now and then by playing a few games of aisleriot on my G33.

Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Hi, all
I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
Thank you.
Nile

Hi,
How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
Please check the application log on the problematic Exchange server and see whether there are any related event error.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Bulk URL Monitoring is SCOM 2012 SP1

Hey Team,
i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure how to resolve
it.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.BulkUrlManager.BulkUrlManagerForm..ctor()
at Microsoft.EnterpriseManagement.BulkUrlManager.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Any suggestions will be highly appreciated.
-vrkumar01
RajKumar

It worked.
intially i tried to install in \System Center 2012\Operations Manager\Setup & System Center 2012\Operations Manager\Server both failed but this
System Center 2012\Operations Manager\Console worked.
thanks a lot
-vrkumar01
RajKumar

Windows Azure Monitoring in SCOM 2012 R2

Hi,
We have Azure subscription which has few cloud services and VM in running state. We want to monitor the VMs running on Azure using SCOM 2012 R2 running on our corp network behind firewall. SCOM Server connected to the internet through the corp proxy.
We have imported the Azure Management packs in to SCOM and Added the Subscription successfully. But, the Azure resource inventory like Discovered Cloud Services, Discovered Storage, Discovered Virtual Machines are empty.
Kindly please help to configure azure monitoring using SCOM 2012 R2.
Thanks
Kumaresan Lakshmanan

Hi
SCOM monitoring check data in azure store, check if the events and performace data is transferring to the azure store.if data is not transfering for event id counters monitor fail to work .
refer below link for more information
Implementing Windows Azure
Diagnostics (http://go.microsoft.com/fwlink/?LinkId=186765).
Transferring Diagnostic
Data to Windows Azure Storage (http://go.microsoft.com/fwlink/?LinkId=191347).
Regards
sridhar v

OEM integration with SCOM 2012

Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.

Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger

Issues with Monitoring Azure services with SCOM 2012 R2

Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
Colin

Hi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks.

General hardware monitoring on SCOM 2012 R2

Hello everybody. Sorry for maybe common question, i'm absolutely newbie in SCOM. I'm standing at task of monitoring basic servers counters - Memory utilization, disk free space & CPU utilization. After reading some articles about SCOM architecture I
get a little frustrated - cannot get full understanding about monitoring mechanisms. What I want from my monitors:
- Monitor 2,3...N groups of servers with _different_ disk free space thresholds and sending alerts (email) to specific people.
I've already have imported management pack for Windows OS, configure channels & subscribers.
I get a lot of question trying to configure such monitoring, maybe you can help me (or send me to manuals)
1. I can use monitor's for specific OS (i.e. logical disk free space), then I need to override it(why? I can't use it?) and select servers.
2. How can I map a group of servers to monitor?
3. Do I need rules?
4. New monitor sets in installed agents automatically?
Cannot understand steps, in which I should resolve my task..

1. Windows OS management pack has default monitor for disk free space and CPU utilization. If you 2,3,...N groups of servers with different disk free space thresholds, you should create Groups which contains the required servers and using override with target
of the gorups.
For how to create an override, pls. refer
http://jimmoldenhauer.blogspot.hk/2012/11/scom-2012-creating-overides.html
2. The target of the monitor is set to the groups of server
3. It depend on situation
Rules do not affect the health state of the target object. They are used for one of three functions
a) Alerting Rules
Alerting rules create an alert when a particular event is detected. This can be any of the different kinds of events shown in Data Sources. Alerting rules do not affect health state.
b) Collection Rules
Collection rules collect events or performance data to the Operations Manager database and data warehouse. They do not create alerts or set health state.
Collection rules can use each of the data sources shown in Data Sources. The data will be converted to either an event or to performance data depending on the particular kind of collection rule you are creating. For some wizards, you will need to provide
the specific information from the data source that will be used for different properties of the data being collected.
c) Command Rules
Command rules will run a script or command on a schedule. They do not create alerts or collect any data.
4) All agents will automatic download updated its monitor and rule which applicable to the server.
Roger

Issues with SCOM 2012 Agent on Red Hat 5 Server

We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?

We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?
I've seen this on a few systems here when the agent has been upgraded but the old agent process does not die off. Just to rule it out, pick a node, make sure there are no instances of scxcimserver or scxcimprovagt and then start the agent and
see if the issue goes away. I've also seen wsman authentication failures related to the libssl issue that was fixed in yesterday's release.

Monitoring services on MSMQ cluster with SCOM 2012

Hello guys,
I'm looking a way that SCOM 2012 is able to monitor several services installed on MSMQ cluster. I think it's possible that SCOM 2012 can generate alert through the message queuing service associated to these services but this is an indirect monitoring. I
would want that SCOM generates the alert for the specific service in problem.
Any suggestion?
Thank you very much.

Hi,
There is a management pack for Message Queuing.
You can download it from http://www.microsoft.com/en-us/download/details.aspx?id=36775
Hope it help's
Greetings,
Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

Minimum value of UNIX/Linux Heartbeat Monitor in scom 2012

Hi,
In my environment, we have SCOM 2012 server, when I change values of UNIX/Linux
Heartbeat Monitor: Interval , Missed
Heartbeats and Missed Heartbeats from 300 , 630 ,2 to 120, 150, 1 in event viewer shows Error
11112:
The Microsoft Operations Manager Consolidate Module failed to initialize because the specified compare count is less than the minimum
Compare count value : 1
Minimum value allowed : 2
One or more workflows were affected by this.
What is the best minimum value?
Thanks

You've ended up in the wrong forum. mostly service manager here, Ops manager is
over there https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenteroperationsmanager.
That being said, the error you reference is somewhat abstracted from the values you adjusted. the error you posted is the system comparison operator complaining that it only has one thing to compare, typically you need two things to do a comparison.
Here is a person running into a similar problem with the lync MP, where it was trying to compare the site assignment of two systems, but the environment only has one system.
http://thoughtsonopsmgr.blogspot.com/2014/09/lync-server-2010-mp-bug-alert.html. is it possible this is an outgrowth of something similar in your unix environment? Do you have any more details about the specific health XML that's failing?

Services monitored by SCOM 2012

Hi All,
I am using SCOM 2012 SP1 in our environment. I am a bit puzzled about what all services of a windows server are monitored by default in SCOM. I am asking this because recently we have WinRM service stopped on a windows server but no alert get generated in
SCOM. Does I need to manually set up monitoring for this service?
Regards,
Daya

Hi,
The System Center Management Pack for Windows Server Operating System provides the fundamental monitoring basics for computers.
From what I can see, the WinRM service is not monitorred by default.
And I would like to suggest you also download the MP guide for Operating System management pack to get more details:
http://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Regards, Yan Li

Dell server hardware component monitoring with scom 2012 R2.

Similar Messages

Maybe you are looking for