Dell U2311H and Powermac G5

Alright folks, I just scored a **** of a deal on Craigslist. I got a nearly new Dell U2311H 23" IPS display for 100 bucks. I've discovered a little problem though. For some reason the VGA connection works perfectly fine with a VGA to DVI adapter on the video card but when I try to run straight DVI from the monitor to the G5 there is no signal. The monitor just goes right into sleep mode. Is there anything special I have to do to get the G5 to recognize the monitor or vice versa?

Strange that it has only a Digital Visual Interface connectors (DVI-D) connection & the Mac has DVI-I, which should support both DVI-D & DVD-A, but who knows?
Might be my poor vision, but I always get a better display using VGA, or DVI->VGA connection, even on my Dell 24" LCD.
VGA sometimes has a greater range & higher Resolutions available than DVI...
Support for digital resolutions up to 1920 by 1200 pixels
Support for analog resolutions up to 1600 by 1200 pixels
ADC and DVI connectors; DVI to VGA adapter included
Dual display support for extended desktop and video mirroring modes
Support for up to two Apple flat panel displays(8)
http://support.apple.com/kb/sp96
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US

Similar Messages

  • I have itunes on old dell desktop and older ipod, bot Macbook air...when i plugged ipod into air to try to put music library on the Air itunes, i got a erase and sync message....will this put my itunes library on my new air?  thank you in advance!

    I have an old dell desktop and an older ipod with my itunes library....the dell desktop is not functioning as well and have not been able to sync a newer ipod to the library .....i now have a newer Macbook air....i would like to put my library on my Air i tunes....when i attached the ipod to the air to try to sync the ipod library onto the air itunes i received a message that said i was synced with another library and that if i wanted to sync with this library i would need to "erase and sync" ....got spooked as i dont want to lose the library/ or the music....question ----will this procedure put my existing library (which is all on my older ipod) onto my Macbook air itunes?...any help would be greatly appreciated...thank you in advance...

    No, it will sync the ipod to the content of the MBA which presumably has nothing on it (= erasing content of iPod and replacing it with nothing).
    Ideally:
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
    Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html
    if you absolutely must use the iPod:
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
    http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store

  • Windows 8.1 recovery problem and install dell backup and recovery software...

    i had upgrade my windows to 8.1, the problem is that i cant install Dell backup & recovery, when i installing and updating PE I get FACTORY SETUP ERROR 5
    is there any technical help me please...thx
    however...its cant recovery or reset my laptop back to factory image...
    just like this photo...
    recovery cant... refresh also cant...

    Same problem here: windows 8.1, dell backup and recovery 1.6.2.4. During the installation, when the box of "updating PE environment" appears, i get "factory error 5"
    Is there any solution?
    Regards

  • HT3014 my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.

    my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
    my laptop is a 2008 model

    Hmmm... 2008 MBP has...
    Video (Monitor):     1 (DVI)
    Details:     Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html

  • Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

    Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

    The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
    There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • I need to switch my iPod touch, 4S generation, computers. I use Dell, I origanally had it synched on a d=Dell laptop, but am not allowed to do so on that anymore. I am on a Dell PC, and want to change it over to this computer. How do I do that?

         I need to switch my iPod touch, 4S generation, to another computer. I use Dell, I origanally had it synched on a Dell laptop, but am not allowed to do so on that anymore. I am on a Dell PC, and want to change it over to this computer. How do I do that? 

    Plug it in and sync it.
    It will erase the ipod content and replace with the content from the new computer so make sure that you have copied everything form the old computer, or your backup copy of the old computer, to your new one first.

  • Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software

    Please read the information at...
    Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
    Locate the execute file (WebcamDell2.exe) buried in... 
    C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
    Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
    If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
    Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
    battery back in and start the computer. Did the webcam come back?
    If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
    If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
    Please use Internet Explorer(32-bit) when navigating to  My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
    ***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
    If system does NOT register after 5 minutes, then contact Dell Tech Support.
    If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for  software update
    Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
    Rick

    Hello Rick,
    Thanks for trying to help.
    Here is the info as requested:-
    Host Name:                 DELLLAPTOP
    OS Name:                   Microsoft Windows 7 Home Premium
    OS Version:                6.1.7601 Service Pack 1 Build 7601
    OS Manufacturer:           Microsoft Corporation
    OS Configuration:          Standalone Workstation
    OS Build Type:             Multiprocessor Free
    Registered Owner:          Trevor
    Registered Organization:   Microsoft
    Product ID:                ?????
    Original Install Date:     07/07/2010, 11:46:05
    System Boot Time:          24/10/2011, 12:06:27
    System Manufacturer:       Dell Inc.
    System Model:              Inspiron 1570
    System Type:               x64-based PC
    Processor(s):              1 Processor(s) Installed.
                              [01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
    BIOS Version:              Dell Inc. A05, 23/03/2011
    Windows Directory:         C:\Windows
    System Directory:          C:\Windows\system32
    Boot Device:               \Device\HarddiskVolume2
    System Locale:             en-gb;English (United Kingdom)
    Input Locale:              en-gb;English (United Kingdom)
    Time Zone:                 (UTC) Dublin, Edinburgh, Lisbon, London
    Total Physical Memory:     2,937 MB
    Available Physical Memory: 1,399 MB
    Virtual Memory: Max Size:  5,872 MB
    Virtual Memory: Available: 4,244 MB
    Virtual Memory: In Use:    1,628 MB
    Page File Location(s):     C:\pagefile.sys
    Domain:                    WORKGROUP
    Logon Server:              \\DELLLAPTOP
    Hotfix(s):                 71 Hotfix(s) Installed.
                              [01]: 982861
                              [02]: KB971033
                              [03]: KB2305420
                              [04]: KB2393802
                              [05]: KB2425227
                              [06]: KB2475792
                              [07]: KB2476490
                              [08]: KB2478662
                              [09]: KB2479628
                              [10]: KB2479943
                              [11]: KB2484033
                              [12]: KB2485376
                              [13]: KB2487426
                              [14]: KB2488113
                              [15]: KB2491683
                              [16]: KB2492386
                              [17]: KB2503658
                              [18]: KB2503665
                              [19]: KB2505438
                              [20]: KB2506014
                              [21]: KB2506212
                              [22]: KB2506223
                              [23]: KB2506928
                              [24]: KB2507618
                              [25]: KB2507938
                              [26]: KB2508272
                              [27]: KB2508429
                              [28]: KB2509553
                              [29]: KB2511250
                              [30]: KB2511455
                              [31]: KB2515325
                              [32]: KB2518869
                              [33]: KB2522422
                              [34]: KB2524375
                              [35]: KB2525694
                              [36]: KB2529073
                              [37]: KB2530548
                              [38]: KB2532531
                              [39]: KB2533552
                              [40]: KB2533623
                              [41]: KB2534366
                              [42]: KB2536275
                              [43]: KB2536276
                              [44]: KB2539635
                              [45]: KB2541014
                              [46]: KB2544893
                              [47]: KB2545698
                              [48]: KB2547666
                              [49]: KB2552343
                              [50]: KB2555917
                              [51]: KB2556532
                              [52]: KB2559049
                              [53]: KB2560656
                              [54]: KB2562937
                              [55]: KB2563227
                              [56]: KB2563894
                              [57]: KB2564958
                              [58]: KB2567053
                              [59]: KB2567680
                              [60]: KB2570791
                              [61]: KB2570947
                              [62]: KB2572077
                              [63]: KB2579686
                              [64]: KB2586448
                              [65]: KB2607712
                              [66]: KB2616676
                              [67]: KB958488
                              [68]: KB976002
                              [69]: KB976902
                              [70]: KB976932
                              [71]: KB982018
    Network Card(s):           4 NIC(s) Installed.
                              [01]: Realtek PCIe GBE Family Controller
                                    Connection Name: Local Area Connection
                                    Status:          Media disconnected
                              [02]: Intel(R) WiFi Link 5100 AGN
                                    Connection Name: Wireless Network Connection
                                    DHCP Enabled:    Yes
                                    DHCP Server:     192.168.1.254
                                    IP address(es)
                                    [01]: ????
                                    [02]: ????
                              [03]: Microsoft Virtual WiFi Miniport Adapter
                                    Connection Name: Wireless Network Connection 2
                                    Status:          Media disconnected
                              [04]: Cisco Systems VPN Adapter for 64-bit Windows
                                    Connection Name: Local Area Connection 2
                                    Status:          Hardware not present
    Hope that this will help.
    Thanks again
    Regards
    Trevor

  • Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

  • Mac pro (late 2013), Dell UP2414Q and windows8.1 bootcamp

    I bought mac pro (late 2013) and Dell UP2414Q.
    Monitor is set on DP1.2 and works normally in OS X. I get 4K@60Hz, I can switch to lower resolutions like 1920x1080 and it works.
    Then I Installed windwos 8.1 which I need for some testing and I have aproblem here:
    When DP 1.2 is enabled, and I switch to 1920x1080 resolution, I get 2 pictures on screen squeezed together - totally useless and I can't work on that.
    If I disable DP 1.2 and revert on monitor to DP 1.1 it works normally. But I switch to 4K with only DP1.1 enabled I can get only 30Hz out.
    As it seems under OS X I can use any resolution with DP 1.2 enabled, but not in windows 8.1 via bootcamp.
    I would really really love to get this working, I tried next things, but nothing worked:
    -update bootcamp support
    -update AMD gpu drivers from their web page
    I already wrote on Dell forum and I got redirected here on apple forums.

    which model  rMBP 13"  or rMBP 15"
    the 13 will support it with the latest intel drivers.
    the 15 will support it with the latest nvidia drivers.
    i have both models and both are working correctly.

  • I own an iPad 2. I run my business on Dell PC and Small Business Server. I use Logmein Hamachi to access between PCs. I have installed Logmein on my IPad. Need help connecting to my businesss PCs....

    I own an iPad2 and run my business on Dell PCs and Small Business Server. I use Logmein Hamachi to gain access between PCs. I have downloaded Logmein to my IPad 2 and want to access my PCs. Would appreciate any help with this process.

    On the Iphone or Ipad you have 2 choices, both of which do the same thing.
    1. Use Safari to log onto Logmein website, where your PCs r listed. Choose which one u want & log onto it.
    2. Use Logmein Ignition w 1time purchase fee & it semi automates the process.

  • I have a 5 year old Dell PC and purchased the Airport Express last year.  After one of the iphone 4s updates I lost the contact and cannot reestablish.  I have even tried to hard wire from my router to the airport express and I cannot connect.

    I have a 5 year old Dell PC and purchased Airport Express last year.  I used my iphone 4s to connect and it has been working until recently I lost connection after one of the iphone updates.  I cannot make contact with the unit.  I have even used an ethernet cable that I hooked to my router and still won't work.  I cantinually get this message from Airport Utility.  An error has occurred and I can not do anything else.

    If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
    AirPort Utility - Manual Setup
    Click the Internet icon
    Connection Sharing = Share a public IP address
    Update
    You will probably get a message about a Double NAT error. Click to "ignore"
    This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
    Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

  • Dell Backup and Recovery - Factory Recovery fails, need advice.

    Back story:
    I have tried this three times on three separate laptops, with poor results. Windows 7 on two of them and 8.1 one one, on all three the recovery partition is corrupt.I first boot it off of a live disk and backup any desired files. Then I boot, press F8, choose "Repair your computer" and discover that "Dell Factory Image Restore" is not one of the available options... so I boot the pc off of a different live disk and remove a bunch of "viruses", then I boot it off of the internal harddrive.In Windows I find that "Dell Backup and Recovery" may or may not be on the pc. It may or may not have ever been run before. If it is absent I download it and install it. When I run DBaR it tells me it needs to update, don't power off or disconnect the machine from the internet, etc. I then wait HOURS for this part to complete. When done it...
    This topic first appeared in the Spiceworks Community

    Country: Greece
    Ship date: March 04, 2013
    XPS 14 (L421X, Mid 2012)
    EMEA (Europe, Middle East and Africa) Support is not provided on the USA User Forum. You have to contact support in your country.
     Dell Backup and Recovery SOFTWARE support is also not provided here.
            Download Dell Backup and Recovery

  • Windows 8.1 Dell Backup and Recovery exe doesn't work

    I purchased dell Inspiron 3542, initially when i click on Dell backup and recovery then it was moving to create backup page. I install some software and transfer some data in my laptop, after this dell backup and recovery is not working. Not able to create backup in usb.
    When i click on dell backup and recovery then it ask me for permission when i click on yes, nothing happen.
    Any suggestions?

    Uninstall it.  Reboot.  Then install.  Reboot.
    All of this should be done as Run as Administrator or it will fail.
    16GIG or Larger usb flash drive is required.  8 gigs is too small.
    http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=8HY96

  • Can I use my Dell EP disk, or is it laden wth Dell Drivers and I must buy 1

    I didn't check all 15,476 mesages, so if it was asked a dozen or so times.please forgive. Simple questiøn, can I use the XP OS from MY dell disk, and ˆif yes, what if anything do I need tstrip off., and then add back on?
    Thanks,

    You don't need to read all 15,000+ messages. The next time you can use the Search Discussions feature (upper right corner) to narrow the scope of messages specific to your question. Many folks can answer their own questions without the need for repeating what's already been asked.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

Maybe you are looking for

  • TACACS is not working in 7206 VXR

    Hi all, TACACS is not working in my 7206 VXR.When i am telneting in to router it is  showing Authorization Failed.I can able to login using console. KEY is same b/w router and the server .Please help. 7206(config)#do sh run | in aaa|tacacs aaa new-mo

  • Can not update apps on iPhone or iTunes

    I updated my iPhone 3GS to iOS 4.3.3 yesterday and I now can't update any apps via my phone or iTunes. On my phone I get the error "Cannot connect to iTunes Store" On iTunes I get "We're sorry, we cannot complete your request on the iTunes Store at t

  • Starting Blend when client not connected to internet?

    I've recently started experimenting with Blend with my Z30 and my laptop running Windows 7 Enterprise sp1; Blend Windows client v.1.1.0.17, Blackberry Blend app v.1.1.0.67 on the Z30. One thing we'd like to do is to use it in places where we have no

  • How to get class B's results in class A

    Hi , Let's say I have classA and classB , classB has number of statements , lets say it has 200 lines that are executable. Here are very important result at line number 198 after processing the above 197 lines .  lets say variable CLASSB.RESULT holds

  • Photo booth effects in imovie

    Is there a feasible way to use effects from photo booth in imovie? I would like to have the background-effect and use my isight-camera. There is no effect to choose. Unfortunately the quality is too bad if I record directly from photo booth. I did no