Dell Vostro 1310 [Solved]

I've got this laptop for about 4 months now. I had two attempts at installing arch on it and I failed and went back to ubuntu.
Everytime I tried it neither my ethernet card and wireless card worked. I'm thinking maybe it's the drivers' fault? In ubuntu everything works "out of the box" and that makes me wonder about it
I don't know what my ethernet card is, but I'll tell you later today (i'm at work now).
The wireless card is Intel PRO/Wireless 3945ABG and arch sees it. I can even scan the networks, but I just can't connect to my AP. We use WPA2 personal.
I'd like some help with this, please.
Last edited by RaisedFist (2008-10-01 18:32:50)

Kernel 2.6.25 is the culprit . It has a broken module for your NIC. I had to install arch with the froscon build yesterday. It has kernel 2.6.26 and therefore a working module. I got my vostro just 2 days ago and Vista annoyed me after an hour of use. http://linuxtracker.org/index.php?page= … ed9ff40c16

Similar Messages

  • Dell Vostro 1310, Close lid, Freeze

    I just installed arch on my old Dell Vostro 1310.
    It is a very fresh and simple install. The only packages I have installed are wget and sshd.
    I.e I have no acpid running.
    I have set HandleLidClose to ignore in logind.conf, but when I close the lid something happens and the laptop freezes.
    ssh access also dies, and fans stop, so it is not just the screen.
    What could be the issue here?
    [EDIT]
    Just noticed a strange workaround. If I have an active SSH connection to the machine, I can close the lid without problems.
    If I close the ssh connection while the lid is closed, it is also still fine. But if I close it without any SSH connection, it freezes.
    Last edited by inferred (2012-12-11 15:49:16)

    I have c600, and I used to have some kind of the same problem with it. I had acpi, and it had difficulties to suspend to RAM and to HDD... there were always problems doing this kind of things. But i reconpiled mu kernel (2.6.10 rc1) with apm support, and dissabled acpi. Now all of this (standby, suspend, etc) is working just fine. When I close the lid, tc PC get asleep.. somekind of suspend to RAM, ot god-knows-where. When I open it, it wakes up... And all of the function buttons are working too... maybe just apm is "native" for this kind of systems.
    good luck

  • Dell Vostro 1310 does not suspend/hibernate

    I can't make my laptop suspend or hibernate. I read the pm utils wiki page and I don't understand what I have to do to make it work I want the machine to suspend to RAM when I close my lid... please help!

    Remove the keyboard and palm rest (guide from dell shows you how) and you should see a small coin cell battery. Remove it for at least 10 seconds, then put it back in. Enter BIOS and make sure there isn't anything weird that was changed. It should work properly now. I have had this working in Ubuntu 12.04 for the last few days, with no problems.

  • Dell Vostro 1310 video issues

    Ever since I switched to arch on my laptop no video playing program works Also I have a lot of issues with screensavers working...
    this is my vga card:
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    and this is what I get when trying to start vlc:
    [????????] x11 video output error: X11 request 141.19 failed with error code 11:
    BadAlloc (insufficient resources for operation)
    X Error of failed request: BadAlloc (insufficient resources for operation)
    Major opcode of failed request: 141 (XVideo)
    Minor opcode of failed request: 19 ()
    Serial number of failed request: 88
    Current serial number in output stream: 89
    The same "BadAlloc (insuficient resources for operation)" error I get with mplayer and when using electricsheep screensaver.
    Is there a solution to this?

    bump (!?)

  • [SOLVED] Vostro 1310 lan connection

    Hi there, I'm having trouble getting my laptop's networks setup. It's a Dell Vostro 1310 and has a Realtek 8100c network card and the wireless card is an Intel Pro Wireless 3945.
    At the moment I have neither of the cards connecting, but I haven't tried the wireless yet and need the ethernet going first as that is the way in which I connect to my adsl router.
    It detected the network card's module correctly it seems as r8169 is loaded with rc.conf.
    Here's part of my rc.conf:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(eth0)
    gateway="default gw 192.168.1.1 eth0"
    ROUTES=(gateway)  /also tried ROUTES=(!gateway)
    It talks about setting device profiles, however I don't know how to do that.
    I wonder if the driver for my nic isn't working for my card? I have got the latest Realtek drivers but I only got errrors on a make modules clean. I also don't think it works for a kernel later than 2.6.23.
    Could someone help me figure this out?
    Last edited by Phineas (2008-08-15 23:18:20)

    After about a week with Kubuntu and KDE4 I have come back to Archlinux. At the end of that time it wouldn't connect to my router at all. Now in Archlinux, with significantly less installed it's connecting automatically. My rc.conf is slightly different, I don't know what I did other than that, I selected iproutes and dnsutils during install of the latest 32-bit arch, but I don't know. At least it works. Here is part of my rc.conf file:
    MODULES=(r8169 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    eth0="dhcp"
    INTERFACES=(eth0)
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)

  • Dell Vostro and iTunes [+media control buttons]

    Hi everybody!
    Well, I have a Dell Vostro 1310 laptop.
    It has media control buttons, as you can see in these images:
    http://img134.imageshack.us/my.php?image=moto0388ha4.jpg
    http://img98.imageshack.us/my.php?image=moto0389iu3.jpg
    http://img91.imageshack.us/my.php?image=moto0390ep2.jpg
    The fact is: the control buttons work properly IF, and only IF, iTunes is the active window.
    If it is not, they simply don't work.
    Is there anything I can do to solve it?

    Hi espectral,
    Welcome to Apple Discussions.
    I'm fairly sure you'd need dedicated software to interface with the keyboard and iTunes, most often 'media' keys only work by coicidence. Therefore, you'd need software from Dell (or other 3rd party software to link iTunes to the keyboard.)
    I don't think Dell specifically support Apple Software, but I know some other brands like Logitech do.
    Hope that helps.
    Regards,
    Peter.

  • [Solved] Xorg Error Dell Vostro 3700

    Hi guys,
    I have been using Arch for quite a few years. I just got a new laptop in the form of a Dell Vostro 3700 with a Nvidia GT 330m.
    When I go to start X I get an error saying that "no screens are found". I have "nvidia" and "nvidia-utils" installed. I am thinking this
    is a driver issue as Dell computers do not support drivers straight from nvidia.
    Any advice would be appreciated.
    Cheers
    Last edited by serideth (2010-12-09 13:09:25)

    I will try the Nouveau driver, It has switchable graphics (which wasn't listed by Dell when I bought it) and the switching happens automatically when I plug in the AC (meaning I don't have to log out to switch like the old switchable graphics) but I am not sure whether it is Optimus (No mention by Dell that it is Optimus enabled).
    Edit.
    Just confirmed out that It DOES have switchable GPU's and Nvidia Optimus which you would think Dell would have advertised in giant writing on their website.
    So now to setup arch with the Intel drivers.
    I will let you know how it goes.
    Second Edit.
    Installed the xf86-video-intel drivers and its working now. Attempting to use the Nouveau or the official Nvidia drivers causes Xorg to return the previous error. This seems to be an incompatibility issue with laptops with switchable graphics and/or Nvidia Optimus. Linux can only utilize the Intel IGP, which is fine for me since I will only use my Arch install to code and leave gaming to W7 with Steam, however if you are planning on using Linux as your primary/only OS on your laptop with switchable graphics/Optimus be advised you will only be able to use the integrated graphics. A fix does not appear to be coming anytime soon either.
    Thanks for everyone's help.
    Cheers
    Last edited by serideth (2010-12-09 13:14:26)

  • MTRR allocation problem on Dell Vostro

    Hello good people,
    I am having MTRR messages from kernel and a warning that graphics performance may suffer. I know from the sparse mtrr documentation around that I can set them up as I want and everything should work  but after trying several changes, the only thing I have managed to do it get a horribly slow laptop.
    I am running 64bit Arch on Dell Vostro 3550. I have 6GB ram and a hybrid video card setup with an Intel card and an ATI one. I am using the proprietary Catalyst driver and I also have the intel driver installed.
    Here we go...
    Kernel message.
    $dmesg | grep -i mtrr
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] MTRR variable ranges enabled:
    [ 17.262434] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    [ 17.262437] [drm] MTRR allocation failed. Graphics performance may suffer.
    I noticed in /proc/config.gz that I don't have MTRR cleanup enabled by default so I tried adding enable_mtrr_cleanup to the boot line but I still don't get a good mtrr.
    $zgrep MTRR /proc/config.gz
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    Now here is the mtrr I would like to repair. Notice that the memory range in reg 0 is 8192MB. Why? Reg 3 should be the range for the intel card since that's the address I get from lspci -vv as you will see. Similary, reg 4 is mapping for the ATI radeon card. According to what I have read, I want to have these as write-combining. The other ranges I have no idea why they are there which complicates my attempts at fixing the mtrr.
    $cat /proc/mtrr
    reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
    reg01: base=0x0cb800000 ( 3256MB), size= 8MB, count=1: uncachable
    reg02: base=0x0cc000000 ( 3264MB), size= 64MB, count=1: uncachable
    reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable
    reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
    reg05: base=0x1afe00000 ( 6910MB), size= 2MB, count=1: uncachable
    reg06: base=0x1b0000000 ( 6912MB), size= 256MB, count=1: uncachable
    reg07: base=0x1c0000000 ( 7168MB), size= 1024MB, count=1: uncachable
    Here is the lspci output.
    $lspci -vv
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: agpgart-intel
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: f7b00000-f7bfffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 04cd
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 53
    Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at f7c0a000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 54
    Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
    Memory behind bridge: f7a00000-f7afffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
    Memory behind bridge: f7900000-f79fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
    I/O behind bridge: 0000b000-0000cfff
    Memory behind bridge: f6800000-f78fffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 49
    Region 0: I/O ports at f0b0 [size=8]
    Region 1: I/O ports at f0a0 [size=4]
    Region 2: I/O ports at f090 [size=8]
    Region 3: I/O ports at f080 [size=4]
    Region 4: I/O ports at f060 [size=32]
    Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at f040 [size=32]
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] (prog-if 00 [VGA controller])
    Subsystem: Dell Device 04cd
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 55
    Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 2: Memory at f7b20000 (64-bit, non-prefetchable) [size=128K]
    Region 4: I/O ports at e000 [size=256]
    Expansion ROM at f7b00000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: fglrx_pci
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Dell Device 04b3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 50
    Region 0: I/O ports at d000 [size=256]
    Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
    Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
    Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 51
    Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi
    0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
    Subsystem: Dell Device 04b3
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
    Region 2: Memory at f7910000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd
    Finally, here is the Xorg log.
    $cat /var/log/Xorg.0.log
    [ 22.722]
    X.Org X Server 1.11.4
    Release Date: 2012-01-27
    [ 22.744] X Protocol Version 11, Revision 0
    [ 22.744] Build Operating System: Linux 3.2.2-1-ARCH x86_64
    [ 22.744] Current Operating System: Linux bitlab 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
    [ 22.744] Kernel command line: root=/dev/mapper/arch--volume-lvroot ro
    [ 22.744] Build Date: 29 January 2012 03:38:00PM
    [ 22.744]
    [ 22.744] Current version of pixman: 0.24.4
    [ 22.744] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.744] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 19 10:29:00 2012
    [ 22.807] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.828] (==) ServerLayout "aticonfig Layout"
    [ 22.828] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 22.828] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 22.829] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 22.829] (==) Automatically adding devices
    [ 22.829] (==) Automatically enabling devices
    [ 22.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.881] Entry deleted from font path.
    [ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.882] Entry deleted from font path.
    [ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.882] Entry deleted from font path.
    [ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.882] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 22.882] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.882] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.882] (II) Loader magic: 0x7ccae0
    [ 22.882] (II) Module ABI versions:
    [ 22.882] X.Org ANSI C Emulation: 0.4
    [ 22.882] X.Org Video Driver: 11.0
    [ 22.882] X.Org XInput driver : 13.0
    [ 22.882] X.Org Server Extension : 6.0
    [ 22.883] (--) PCI:*(0:0:2:0) 8086:0126:1028:04cd rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 22.883] (--) PCI: (0:1:0:0) 1002:6741:1028:04cd rev 0, Mem @ 0xe0000000/268435456, 0xf7b20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 22.883] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.883] (II) "extmod" will be loaded by default.
    [ 22.883] (II) "dbe" will be loaded by default.
    [ 22.883] (II) "glx" will be loaded by default.
    [ 22.883] (II) "record" will be loaded by default.
    [ 22.883] (II) "dri" will be loaded by default.
    [ 22.883] (II) "dri2" will be loaded by default.
    [ 22.883] (II) LoadModule: "extmod"
    [ 22.934] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.935] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.935] compiled for 1.11.4, module version = 1.0.0
    [ 22.935] Module class: X.Org Server Extension
    [ 22.935] ABI class: X.Org Server Extension, version 6.0
    [ 22.935] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.935] (II) Loading extension XFree86-VidModeExtension
    [ 22.935] (II) Loading extension XFree86-DGA
    [ 22.935] (II) Loading extension DPMS
    [ 22.935] (II) Loading extension XVideo
    [ 22.935] (II) Loading extension XVideo-MotionCompensation
    [ 22.935] (II) Loading extension X-Resource
    [ 22.935] (II) LoadModule: "dbe"
    [ 22.935] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.936] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.936] compiled for 1.11.4, module version = 1.0.0
    [ 22.936] Module class: X.Org Server Extension
    [ 22.936] ABI class: X.Org Server Extension, version 6.0
    [ 22.936] (II) Loading extension DOUBLE-BUFFER
    [ 22.936] (II) LoadModule: "glx"
    [ 22.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.951] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.951] compiled for 6.9.0, module version = 1.0.0
    [ 22.952] (II) Loading extension GLX
    [ 22.952] (II) LoadModule: "record"
    [ 22.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.957] (II) Module record: vendor="X.Org Foundation"
    [ 22.957] compiled for 1.11.4, module version = 1.13.0
    [ 22.957] Module class: X.Org Server Extension
    [ 22.957] ABI class: X.Org Server Extension, version 6.0
    [ 22.957] (II) Loading extension RECORD
    [ 22.957] (II) LoadModule: "dri"
    [ 22.958] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.965] (II) Module dri: vendor="X.Org Foundation"
    [ 22.965] compiled for 1.11.4, module version = 1.0.0
    [ 22.965] ABI class: X.Org Server Extension, version 6.0
    [ 22.965] (II) Loading extension XFree86-DRI
    [ 22.965] (II) LoadModule: "dri2"
    [ 22.965] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.966] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.966] compiled for 1.11.4, module version = 1.2.0
    [ 22.966] ABI class: X.Org Server Extension, version 6.0
    [ 22.966] (II) Loading extension DRI2
    [ 22.966] (II) LoadModule: "fglrx"
    [ 22.966] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 23.148] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 23.154] compiled for 1.4.99.906, module version = 8.96.4
    [ 23.154] Module class: X.Org Video Driver
    [ 23.156] (II) Loading sub module "fglrxdrm"
    [ 23.156] (II) LoadModule: "fglrxdrm"
    [ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 23.183] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 23.183] compiled for 1.4.99.906, module version = 8.96.4
    [ 23.192] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
    [ 23.192] (II) ATI Proprietary Linux Driver Release Identifier: 8.961
    [ 23.192] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2012 23:06:21
    [ 23.192] (++) using VT number 7
    [ 23.195] (WW) Falling back to old probe method for fglrx
    [ 23.260] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 23.263] (--) Chipset Supported AMD Graphics Processor (0x6741) found
    [ 23.264] (II) fglrx: intel VGA device detected, load intel driver.
    [ 23.264] (II) LoadModule: "intel"
    [ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.296] (II) Module intel: vendor="X.Org Foundation"
    [ 23.296] compiled for 1.11.2, module version = 2.17.0
    [ 23.296] Module class: X.Org Video Driver
    [ 23.296] ABI class: X.Org Video Driver, version 11.0
    [ 23.298] ukiDynamicMajor: found major device number 251
    [ 23.298] ukiDynamicMajor: found major device number 251
    [ 23.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 23.298] ukiOpenDevice: node name is /dev/ati/card0
    [ 23.298] ukiOpenDevice: open result is 7, (OK)
    [ 23.298] ukiOpenByBusid: ukiOpenMinor returns 7
    [ 23.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 23.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 23.301] (II) AMD Video driver is signed
    [ 23.301] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 23.301] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 23.301] (II) fglrx(0): pEnt->device->identifier=0x100a450
    [ 23.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.302] (II) intel(1): pEnt->device->identifier=(nil)
    [ 23.302] (EE) Screen 1 deleted because of no matching config section.
    [ 23.302] (II) UnloadModule: "intel"
    [ 23.302] (II) Unloading intel
    [ 23.302] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
    [ 23.302] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
    [ 23.798] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
    Switch to AMD
    [ 23.801] drmOpenDevice: node name is /dev/dri/card0
    [ 23.801] drmOpenDevice: open result is 12, (OK)
    [ 23.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.801] drmOpenDevice: node name is /dev/dri/card0
    [ 23.801] drmOpenDevice: open result is 12, (OK)
    [ 23.801] drmOpenByBusid: drmOpenMinor returns 12
    [ 23.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.801] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 23.801] (==) fglrx(0): RGB weight 888
    [ 23.801] (==) fglrx(0): Default visual is TrueColor
    [ 23.802] (**) fglrx(0): Option "Tiling" "off"
    [ 23.802] (**) fglrx(0): Option "LinearFramebuffer" "on"
    [ 23.802] (**) fglrx(0): Option "Shadow" "off"
    [ 23.802] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 23.802] (**) fglrx(0): ChipID override: 0x0126
    [ 23.802] (**) fglrx(0): ChipRev override: 9
    [ 23.802] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2+)"
    [ 23.802] (**) fglrx(0): Relaxed fencing enabled
    [ 23.802] (**) fglrx(0): Wait on SwapBuffers? enabled
    [ 23.802] (**) fglrx(0): Triple buffering? enabled
    [ 23.802] (**) fglrx(0): Framebuffer linear
    [ 23.802] (**) fglrx(0): Pixmaps linear
    [ 23.802] (**) fglrx(0): 3D buffers tiled
    [ 23.802] (**) fglrx(0): SwapBuffers wait enabled
    [ 23.802] (==) fglrx(0): video overlay key set to 0x101fe
    [ 23.802] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
    [ 23.802] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 23.802] (II) fglrx(0): Output VGA1 has no monitor section
    [ 23.825] (II) fglrx(0): Output HDMI1 has no monitor section
    [ 23.863] (II) fglrx(0): Output DP1 has no monitor section
    [ 23.863] (II) fglrx(0): EDID for output LVDS1
    [ 23.863] (II) fglrx(0): Manufacturer: LGD Model: 2e3 Serial#: 0
    [ 23.863] (II) fglrx(0): Year: 2010 Week: 0
    [ 23.863] (II) fglrx(0): EDID Version: 1.4
    [ 23.863] (II) fglrx(0): Digital Display Input
    [ 23.863] (II) fglrx(0): 6 bits per channel
    [ 23.863] (II) fglrx(0): Digital interface is undefined
    [ 23.863] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 23.863] (II) fglrx(0): Gamma: 2.20
    [ 23.863] (II) fglrx(0): No DPMS capabilities specified
    [ 23.863] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 23.863] (II) fglrx(0): First detailed timing is preferred mode
    [ 23.863] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 23.863] (II) fglrx(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
    [ 23.863] (II) fglrx(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
    [ 23.863] (II) fglrx(0): Manufacturer's mask: 0
    [ 23.863] (II) fglrx(0): Supported detailed timing:
    [ 23.863] (II) fglrx(0): clock: 76.0 MHz Image Size: 344 x 194 mm
    [ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
    [ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 810 v_border: 0
    [ 23.863] (II) fglrx(0): Supported detailed timing:
    [ 23.863] (II) fglrx(0): clock: 51.0 MHz Image Size: 344 x 194 mm
    [ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
    [ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 814 v_border: 0
    [ 23.863] (II) fglrx(0): PPCTF156WH4
    [ 23.863] (II) fglrx(0): Unknown vendor-specific block 0
    [ 23.863] (II) fglrx(0): EDID (in hex):
    [ 23.863] (II) fglrx(0): 00ffffffffffff0030e4e30200000000
    [ 23.863] (II) fglrx(0): 00140104902213780a09159d5f599b27
    [ 23.863] (II) fglrx(0): 19505400000001010101010101010101
    [ 23.863] (II) fglrx(0): 010101010101b01d56c650002a302430
    [ 23.863] (II) fglrx(0): 350058c210000019ec1356c650002e30
    [ 23.863] (II) fglrx(0): 2430350058c210000019000000fe0050
    [ 23.863] (II) fglrx(0): 50435446803135365748340a00000000
    [ 23.863] (II) fglrx(0): 00004131960000000001010a202000ef
    [ 23.863] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 23.863] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 23.863] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 23.863] (II) fglrx(0): Printing probed modes for output LVDS1
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x60.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1366x768"x40.1 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 23.863] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.863] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.863] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.863] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.863] (II) fglrx(0): EDID for output VGA1
    [ 23.887] (II) fglrx(0): EDID for output HDMI1
    [ 23.926] (II) fglrx(0): EDID for output DP1
    [ 23.973] (II) fglrx(0): Output LVDS1 connected
    [ 23.973] (II) fglrx(0): Output VGA1 disconnected
    [ 23.973] (II) fglrx(0): Output HDMI1 disconnected
    [ 23.973] (II) fglrx(0): Output DP1 disconnected
    [ 23.973] (II) fglrx(0): Using exact sizes for initial modes
    [ 23.973] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
    [ 23.973] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.973] (II) fglrx(0): Kernel page flipping support detected, enabling
    [ 23.973] (**) fglrx(0): Display dimensions: (340, 190) mm
    [ 23.973] (**) fglrx(0): DPI set to (102, 102)
    [ 23.973] (II) Loading sub module "fb"
    [ 23.973] (II) LoadModule: "fb"
    [ 23.984] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.133] (II) Module fb: vendor="X.Org Foundation"
    [ 24.133] compiled for 1.11.4, module version = 1.0.0
    [ 24.133] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.133] (II) Loading sub module "dri2"
    [ 24.133] (II) LoadModule: "dri2"
    [ 24.133] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.133] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.133] compiled for 1.11.4, module version = 1.2.0
    [ 24.133] ABI class: X.Org Server Extension, version 6.0
    [ 24.133] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 24.133] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 24.133] (==) fglrx(0): Default visual is TrueColor
    [ 24.133] (**) fglrx(0): Option "DPMS" "true"
    [ 24.133] (==) fglrx(0): RGB weight 888
    [ 24.133] (II) fglrx(0): Using 8 bits per RGB
    [ 24.133] (==) fglrx(0): Buffer Tiling is ON
    [ 24.133] (II) Loading sub module "fglrxdrm"
    [ 24.133] (II) LoadModule: "fglrxdrm"
    [ 24.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 24.133] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 24.133] compiled for 1.4.99.906, module version = 8.96.4
    [ 24.134] ukiDynamicMajor: found major device number 251
    [ 24.134] ukiDynamicMajor: found major device number 251
    [ 24.134] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.134] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.134] ukiOpenDevice: open result is 13, (OK)
    [ 24.134] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 24.134] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 24.135] (**) fglrx(0): NoAccel = NO
    [ 24.135] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [ 24.135] (--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
    [ 24.135] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x04cd)
    [ 24.135] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [ 24.135] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    [ 24.135] (--) fglrx(0): MMIO registers at 0xf7b20000
    [ 24.135] (--) fglrx(0): I/O port at 0x0000e000
    [ 24.135] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 24.157] (II) fglrx(0): AC Adapter is used
    [ 24.236] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [ 24.236] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
    [ 24.236] (II) fglrx(0): PCIE card detected
    [ 24.236] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 24.236] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 24.241] (II) fglrx(0): Using adapter: 1:0.0.
    [ 24.248] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
    [ 24.274] (II) fglrx(0): Interrupt handler installed at IRQ 55.
    [ 24.274] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 24.274] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 24.274] (==) fglrx(0): Center Mode is disabled
    [ 24.274] (II) Loading sub module "fb"
    [ 24.274] (II) LoadModule: "fb"
    [ 24.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.274] (II) Module fb: vendor="X.Org Foundation"
    [ 24.274] compiled for 1.11.4, module version = 1.0.0
    [ 24.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.274] (II) Loading sub module "ddc"
    [ 24.274] (II) LoadModule: "ddc"
    [ 24.274] (II) Module "ddc" already built-in
    [ 24.388] (II) fglrx(0): Finished Initialize PPLIB!
    [ 24.396] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 24.397] (II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 6 configurable heads and 0 displays connected.
    [ 24.397] (==) fglrx(0): PseudoColor visuals disabled
    [ 24.397] (II) Loading sub module "ramdac"
    [ 24.397] (II) LoadModule: "ramdac"
    [ 24.397] (II) Module "ramdac" already built-in
    [ 24.397] (==) fglrx(0): NoDRI = NO
    [ 24.397] (==) fglrx(0): Capabilities: 0x00000000
    [ 24.397] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 24.397] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 24.397] (==) fglrx(0): UseFastTLS=0
    [ 24.397] (--) Depth 24 pixmap format is 32 bpp
    [ 24.397] (II) LoadModule: "glesx"
    [ 24.458] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 24.594] (II) Module glesx: vendor="X.Org Foundation"
    [ 24.594] compiled for 1.4.99.906, module version = 1.0.0
    [ 24.594] (II) Loading extension GLESX
    [ 24.606] (II) fglrx(0): [DRI2] Setup complete
    [ 24.606] (II) fglrx(0): [DRI2] DRI driver: i965
    [ 24.606] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
    [ 24.610] (II) UXA(0): Driver registered support for the following operations:
    [ 24.610] (II) solid
    [ 24.610] (II) copy
    [ 24.610] (II) composite (RENDER acceleration)
    [ 24.610] (II) put_image
    [ 24.610] (II) get_image
    [ 24.610] (==) fglrx(0): Backing store disabled
    [ 24.610] (==) fglrx(0): Silken mouse enabled
    [ 24.610] (II) fglrx(0): Initializing HW Cursor
    [ 24.666] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 24.667] (**) fglrx(0): DPMS enabled
    [ 24.667] (==) fglrx(0): Intel XvMC decoder enabled
    [ 24.667] (II) fglrx(0): Set up textured video
    [ 24.667] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
    [ 24.667] (II) fglrx(0): direct rendering: DRI2 Enabled
    [ 24.667] (WW) fglrx(0): Option "VendorName" is not used
    [ 24.667] (WW) fglrx(0): Option "ModelName" is not used
    [ 24.667] (WW) fglrx(0): Option "Shadow" is not used
    [ 24.667] (WW) fglrx(0): Option "Tiling" is not used
    [ 24.667] (WW) fglrx(0): Option "LinearFramebuffer" is not used
    [ 24.667] (==) fglrx(0): hotplug detection: "enabled"
    [ 24.668] (II) Loading extension ATIFGLRXDRI
    [ 24.668] (II) fglrx(0): doing swlDriScreenInit
    [ 24.668] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiDynamicMajor: found major device number 251
    [ 24.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.668] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.668] ukiOpenDevice: open result is 15, (OK)
    [ 24.668] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 24.668] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 24.668] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 24.668] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 24.668] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 24.668] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9e27b95000
    [ 24.668] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 24.668] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 24.668] (II) fglrx(0): swlDriScreenInit done
    [ 24.668] (II) fglrx(0): Kernel Module Version Information:
    [ 24.668] (II) fglrx(0): Name: fglrx
    [ 24.668] (II) fglrx(0): Version: 8.96.4
    [ 24.668] (II) fglrx(0): Date: Apr 5 2012
    [ 24.668] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    [ 24.668] (II) fglrx(0): Kernel Module version matches driver.
    [ 24.668] (II) fglrx(0): Kernel Module Build Time Information:
    [ 24.668] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.3.6-1-ARCH
    [ 24.668] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 24.668] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 24.668] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 24.668] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 24.699] (II) fglrx(0): DRI initialization successfull
    [ 24.699] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
    [ 24.699] (II) fglrx(0): Intel display surface mc addr for AMD: 8fce0000
    [ 24.700] (==) fglrx(0): Backing store disabled
    [ 24.700] (II) Loading extension FGLRXEXTENSION
    [ 24.700] (**) fglrx(0): DPMS enabled
    [ 24.700] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 24.700] (**) fglrx(0): Textured Video is enabled.
    [ 24.700] (II) fglrx(0): GLESX enableFlags = 848
    [ 24.700] (II) fglrx(0): GLESX is enabled
    [ 24.700] (II) LoadModule: "amdxmm"
    [ 24.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 24.709] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 24.709] compiled for 1.4.99.906, module version = 2.0.0
    [ 24.709] (II) Loading extension AMDXVOPL
    [ 24.709] (II) Loading extension AMDXVBA
    [ 24.709] XvScreenInit: screen devPrivates ptr non-NULL before init
    [ 24.721] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 24.723] (II) fglrx(0): Enable composite support successfully
    [ 24.723] (WW) fglrx(0): Option "VendorName" is not used
    [ 24.723] (WW) fglrx(0): Option "ModelName" is not used
    [ 24.723] (WW) fglrx(0): Option "Shadow" is not used
    [ 24.723] (WW) fglrx(0): Option "Tiling" is not used
    [ 24.723] (WW) fglrx(0): Option "LinearFramebuffer" is not used
    [ 24.723] (II) fglrx(0): X context handle = 0x1
    [ 24.723] (II) fglrx(0): [DRI] installation complete
    [ 24.736] (--) RandR disabled
    [ 24.736] (II) Initializing built-in extension Generic Event Extension
    [ 24.736] (II) Initializing built-in extension SHAPE
    [ 24.736] (II) Initializing built-in extension MIT-SHM
    [ 24.736] (II) Initializing built-in extension XInputExtension
    [ 24.736] (II) Initializing built-in extension XTEST
    [ 24.736] (II) Initializing built-in extension BIG-REQUESTS
    [ 24.736] (II) Initializing built-in extension SYNC
    [ 24.736] (II) Initializing built-in extension XKEYBOARD
    [ 24.736] (II) Initializing built-in extension XC-MISC
    [ 24.736] (II) Initializing built-in extension SECURITY
    [ 24.736] (II) Initializing built-in extension XINERAMA
    [ 24.736] (II) Initializing built-in extension XFIXES
    [ 24.736] (II) Initializing built-in extension RENDER
    [ 24.736] (II) Initializing built-in extension RANDR
    [ 24.736] (II) Initializing built-in extension COMPOSITE
    [ 24.736] (II) Initializing built-in extension DAMAGE
    [ 24.737] ukiDynamicMajor: found major device number 251
    [ 24.737] ukiDynamicMajor: found major device number 251
    [ 24.737] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.737] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.737] ukiOpenDevice: open result is 16, (OK)
    [ 24.737] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 24.737] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 25.513] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 25.597] (II) fglrx(0): Enable the clock gating!
    [ 25.597] (II) fglrx(0): Setting screen physical size to 361 x 203
    [ 25.834] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 25.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 25.834] (II) LoadModule: "evdev"
    [ 25.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.840] (II) Module evdev: vendor="X.Org Foundation"
    [ 25.840] compiled for 1.10.99.902, module version = 2.6.0
    [ 25.840] Module class: X.Org XInput Driver
    [ 25.840] ABI class: X.Org XInput driver, version 13.0
    [ 25.840] (II) Using input driver 'evdev' for 'Power Button'
    [ 25.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.840] (**) Power Button: always reports core events
    [ 25.840] (**) Power Button: Device: "/dev/input/event6"
    [ 25.840] (--) Power Button: Found keys
    [ 25.840] (II) Power Button: Configuring as keyboard
    [ 25.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 25.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 25.840] (**) Option "xkb_rules" "evdev"
    [ 25.840] (**) Option "xkb_model" "evdev"
    [ 25.840] (**) Option "xkb_layout" "us"
    [ 25.868] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 25.868] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 25.868] (II) Using input driver 'evdev' for 'Video Bus'
    [ 25.868] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Video Bus: always reports core events
    [ 25.869] (**) Video Bus: Device: "/dev/input/event12"
    [ 25.869] (--) Video Bus: Found keys
    [ 25.869] (II) Video Bus: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
    [ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.869] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 25.869] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 25.869] (II) Using input driver 'evdev' for 'Video Bus'
    [ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Video Bus: always reports core events
    [ 25.869] (**) Video Bus: Device: "/dev/input/event11"
    [ 25.869] (--) Video Bus: Found keys
    [ 25.869] (II) Video Bus: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input11/event11"
    [ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.869] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 25.869] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 25.869] (II) Using input driver 'evdev' for 'Power Button'
    [ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.869] (**) Power Button: always reports core events
    [ 25.869] (**) Power Button: Device: "/dev/input/event4"
    [ 25.869] (--) Power Button: Found keys
    [ 25.869] (II) Power Button: Configuring as keyboard
    [ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 25.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 25.869] (**) Option "xkb_rules" "evdev"
    [ 25.869] (**) Option "xkb_model" "evdev"
    [ 25.869] (**) Option "xkb_layout" "us"
    [ 25.870] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 25.870] (II) No input driver specified, ignoring this device.
    [ 25.870] (II) This device may have been added with another device file.
    [ 25.870] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 25.870] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 25.870] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.870] (**) Sleep Button: always reports core events
    [ 25.870] (**) Sleep Button: Device: "/dev/input/event5"
    [ 25.870] (--) Sleep Button: Found keys
    [ 25.870] (II) Sleep Button: Configuring as keyboard
    [ 25.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 25.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 25.870] (**) Option "xkb_rules" "evdev"
    [ 25.870] (**) Option "xkb_model" "evdev"
    [ 25.870] (**) Option "xkb_layout" "us"
    [ 25.870] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event8)
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
    [ 25.870] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
    [ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: always reports core events
    [ 25.870] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event8"
    [ 25.870] (--) Laptop_Integrated_Webcam_FHD: Found keys
    [ 25.870] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
    [ 25.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
    [ 25.870] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 11)
    [ 25.870] (**) Option "xkb_rules" "evdev"
    [ 25.870] (**) Option "xkb_model" "evdev"
    [ 25.870] (**) Option "xkb_layout" "us"
    [ 25.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
    [ 25.871] (II) No input driver specified, ignoring this device.
    [ 25.871] (II) This device may have been added with another device file.
    [ 25.871] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 25.871] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 25.871] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 25.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.871] (**) Logitech USB Receiver: always reports core events
    [ 25.871] (**) Logitech USB Receiver: Device: "/dev/input/event1"
    [ 25.871] (--) Logitech USB Receiver: Found 20 mouse buttons
    [ 25.871] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 25.871] (--) Logitech USB Receiver: Found relative axes
    [ 25.871] (--) Logitech USB Receiver: Found x and y relative axes
    [ 25.871] (II) Logitech USB Receiver: Configuring as mouse
    [ 25.871] (II) Logitech USB Receiver: Adding scrollwheel support
    [ 25.871] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 25.871] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
    [ 25.871] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
    [ 25.871] (II) Logitech USB Receiver: initialized for relative axes.
    [ 25.871] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 25.871] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 25.872] (II) No input driver specified, ignoring this device.
    [ 25.872] (II) This device may have been added with another device file.
    [ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 25.872] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 25.872] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.872] (**) Logitech USB Receiver: always reports core events
    [ 25.872] (**) Logitech USB Receiver: Device: "/dev/input/event2"
    [ 25.872] (--) Logitech USB Receiver: Found 1 mouse buttons
    [ 25.872] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 25.872] (--) Logitech USB Receiver: Found relative axes
    [ 25.872] (--) Logitech USB Receiver: Found absolute axes
    [ 25.872] (--) Logitech USB Receiver: Found keys
    [ 25.872] (II) Logitech USB Receiver: Configuring as mouse
    [ 25.872] (II) Logitech USB Receiver: Configuring as keyboard
    [ 25.872] (II) Logitech USB Receiver: Adding scrollwheel support
    [ 25.872] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 25.872] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.1/input/input2/event2"
    [ 25.872] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
    [ 25.872] (**) Option "xkb_rules" "evdev"
    [ 25.872] (**) Option "xkb_model" "evdev"
    [ 25.872] (**) Option "xkb_layout" "us"
    [ 25.872] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [ 25.872] (II) Logitech USB Receiver: initialized for absolute axes.
    [ 25.872] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 25.872] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 25.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 25.872] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 25.872] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.872] (**) AT Translated Set 2 keyboard: always reports core events
    [ 25.872] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 25.872] (--) AT Translated Set 2 keyboard: Found keys
    [ 25.872] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 25.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 25.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 25.873] (**) Option "xkb_rules" "evdev"
    [ 25.873] (**) Option "xkb_model" "evdev"
    [ 25.873] (**) Option "xkb_layout" "us"
    [ 25.873] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
    [ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
    [ 25.873] (II) LoadModule: "synaptics"
    [ 25.873] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 25.883] (II) Module synaptics: vendor="X.Org Foundation"
    [ 25.884] compiled for 1.11.0, module version = 1.5.0
    [ 25.884] Module class: X.Org XInput Driver
    [ 25.884] ABI class: X.Org XInput driver, version 13.0
    [ 25.884] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
    [ 25.884] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 25.884] (**) Option "Device" "/dev/input/event10"
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
    [ 25.884] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
    [ 25.884] (**) Option "TapButton1" "1"
    [ 25.884] (**) Option "TapButton2" "2"
    [ 25.884] (**) Option "TapButton3" "3"
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 25.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
    [ 25.884] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
    [ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
    [ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
    [ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 25.885] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
    [ 25.885] (II) No input driver specified, ignoring this device.
    [ 25.885] (II) This device may have been added with another device file.
    [ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
    [ 25.885] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
    [ 25.885] (II) Using input driver 'evdev' for 'DualPoint Stick'
    [ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.885] (**) DualPoint Stick: always reports core events
    [ 25.885] (**) DualPoint Stick: Device: "/dev/input/event9"
    [ 25.885] (--) DualPoint Stick: Found 3 mouse buttons
    [ 25.885] (--) DualPoint Stick: Found relative axes
    [ 25.885] (--) DualPoint Stick: Found x and y relative axes
    [ 25.885] (II) DualPoint Stick: Configuring as mouse
    [ 25.885] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
    [ 25.885] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 25.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 25.885] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
    [ 25.885] (II) DualPoint Stick: initialized for relative axes.
    [ 25.885] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
    [ 25.885] (**) DualPoint Stick: (accel) acceleration profile 0
    [ 25.885] (**) DualPoint Stick: (accel) acceleration factor: 2.000
    [ 25.885] (**) DualPoint Stick: (accel) acceleration threshold: 4
    [ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
    [ 25.885] (II) No input driver specified, ignoring this device.
    [ 25.885] (II) This device may have been added with another device file.
    [ 25.885] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
    [ 25.885] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 25.885] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 25.885] (**) Dell WMI hotkeys: always reports core events
    [ 25.885] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
    [ 25.885] (--) Dell WMI hotkeys: Found keys
    [ 25.885] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 25.885] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 25.885] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
    [ 25.885] (**) Option "xkb_rules" "evdev"
    [ 25.886] (**) Option "xkb_model" "evdev"
    [ 25.886] (**) Option "xkb_layout" "us"
    [ 25.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 39.128] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 39.128] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 52.382] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 52.382] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 53.649] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 53.649] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.483] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.483] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.551] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.551] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.619] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.619] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.686] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.686] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.751] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.751] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.816] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.816] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 54.900] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 54.900] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.376] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.377] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.459] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.459] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.459] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.460] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.547] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.547] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.625] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.625] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
    [ 55.697] (II) fglrx(0): EDID vendor "LGD", prod id 739
    [ 55.697] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
    [ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0

    Hello,
    i get the same messages without any problems for my intel card.
    You can read more about it in this thread:
    http://forums.gentoo.org/viewtopic-t-85 … ec66f93bf2
    There are a fair amount of people who have posted their /proc/mtrr there, you can compare yours to them.
    In the end they come to the conclusion, that uncachable entries are not a problem, for the most systems.
    However uncachable regions of 1024MB seem to be too large.
    On my mtrr the biggest uncachable entry is 64MB.
    So you might get improvement from solving this.

  • DELL VOSTRO 3750 with Windows 7 64 bit BOSD

    Hello:
    I have been dealing with BSOD for the last 8 months, but my hardware appears fine.  I thought the problem was related to some wrong DELL drivers for my DELL VOSTRO 3750 with Windows 7 64 bit.  Tried for a few months to solve the problem with DELL
    customer service.  My warranty ran out May 31, 2014.  I had DELL come and replace the network card and the fan because I was having overheating issues and some of the indications from the bluescreen messages seemed to point at the network card.  A
    month after warranty ran out, I was still getting BSOD so I tried uninstalling and reinstalling original drivers from DELL.  Worked fine for a couple of months. Then the BSODs came back again everyday or 2.
    Is there anyone in the Microsoft world that can help? 
    https://www.dropbox.com/s/0ze9z2yduzdnh5u/MEMORY.DMP?dl=0
    Really appreciated,
    Tim

    Hi,
    I checked the link again and it still stay unavailable.
    Please recheck and upload the files again.
    For resolving Blue Screen Errors in Widnows 7, please first take a look at the following article:
    Resolving stop (blue screen) errors in Windows 7
    Best regards
    Michael Shao
    TechNet Community Support

  • Dell Vostro 3350, Lap Top, Offline, How can I change it

    I have a Dell Vostro 3350 Lap Top, Windows 7, It will not print because it is offline.
    How do I change it.

     Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My Dell Vostro (running XP SP3) neither recognizes my iPad 2 nor my iPhone 4 correctly! I followed the troubleshooting guides and installed the latest iTunes. Both devices are recognised by my desktop PC running Vista using the exact same cable etc.

    Hello all,
    my Laptop (Dell Vostro - running XP SP3) neither recognizes my iPad 2 nor my iPhone 4! 
    Both devices are working correctly with my desktop PC running Vista with the same USB cable!  
    I followed trouble shooting guides, checked that the drivers are present, installed, removed and reinstalled the latest iTunes (in the correct order together with the other Apple software components) etc. but nothing works! The interesting thing is that when I plug the iPad or the iPhone in the laptop's usb-port for a second Windows correctly shows the devices either as iPad or iPhone in the "Device Manager" with an exclamation point !!!    But then after a split second Windows allways switches the devices to Digital Camera and the correct iPad or iPhone disappears !!!     =>    That is why I guess that this is a driver problem!
    Does anybody have any idea what else I can try?
    Is there a manual way to install the drivers for the iPad 2 or iPhone 4?
    Many thanks for your ideas and suggestions
    Edgar

    Yes I know that (I always google first and ask later ). Too bad I find this out when it was too late. I was already on 4.3.

  • My Mouse pad alway error ( Stop Working ) when I use firefox browser ! I Try To Reinstall Firefox And Reinstall my OS but it Can not helps ! My Computer Is : Dell Vostro V 130 , Windows 7 64-bit Home Premium !! Pls Help Me !!

    My Mose Pad Has Stop Working ! But My external mouse ( laser Mouse ) can work , i try to install other version of firefox ( thunder bird, aurora) but it still the same , even if I reinstall my windows ( my OS is Windows 64-bit Home Premium ) My Computer is Dell Vostro V130.

    Hi,
    In this case, you can try repairing windows image using DISM command.
    http://technet.microsoft.com/en-us/library/hh824869.aspx
    If it still can't work, please make a repair install to fix your system.
    http://support.microsoft.com/kb/2255099
    Andy Altmann
    TechNet Community Support

  • Upgrading Graphics card and Power supply in Dell vostro 460 mini tower

    I have a dell vostro 460 with i5-2400 3.4 Ghz,12GB DDR3 RAM,350W stock PSU and msi Radeon HD 7750 gpu.I want to upgrade my GPU to Asus strix gtx 960 4GB version or maybe gtx 970 if it fits.For that i need to upgrade my PSU.So I have choosen Corsair GS 600 psu(600W),so will it fit in my mini tower.And also will a gtx 970 fit in my pc after upgrading my psu.if not then what about gtx 960 4GB variant.I am really cofused.I dont want to buy if I won't be able to use it.Pls clearify my doubts.

    Plug in No post No nothing OR  Plug in Post , Install Drivers, Reboot,  Nothing Black Screen.There is a 6792 post thread on them not working in XPS 8700's. Any Standard EPS12v Power supply like the corsair CS750M will fit in your case.
    You can test the not working theory by calling up a vendor that sells the 900 series cards and tell them you have a vostro 460 and that when you install the driver and reboot its a black screen.
    Then tell them you want an RMA for a non working card and see how they dance around not giving you your money back.
    The EPS12V spec 2.92 guarantees 170w combined on the 5V/3.3V rails and 20W on the 5VSB as well as 45 amps on a Single 12V rail.
    http://www.microcenter.com/product/425477/CS_Series_CS750M_750_Watt_ATX_Modular_Power_Supply
    http://www.amazon.com/Corsair-Series-Modular-Efficient-CS750M/dp/B00GH9NA0A
    http://www.corsair.com/en-us/cs-series-modular-cs750m-750-watt-80-plus-gold-certified-psu
    Corsair CS Series 750 Watt ATX Modular and Efficient Power Supply CS750M is a suitable brand I find on Amazon and in Microcenter.
    Corsair CS750M EPS12V 2.92
    DC Output Rating
    DC Output
    +3.3V
    +5V
    +12V
    -12V
    +5Vsb
    Max Load
    25A
    25A
    62A
    0.8A
    3.0A
    Maximum
    130W
    744W
    9.6W
    15W
    Total Power: 750W

  • Elantech Touchpad Detected As PS/2 Elantech Mouse (Dell Vostro 3560)

    Dear community,
    I am facing troubles with my Dell Vostro 3560's Elantech Touchpad. It gets detected as PS/2 Elantech mouse.
    [acs@einherij ~]$ xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Elantech Mouse id=12 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ Laptop_Integrated_Webcam_E4HD id=10 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
    ↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
    Testwise. I installed from AUR the "psmouse-elantech" package (as mentioned in the Touchpad Synaptics article). After reboot, no effect at all, xinput gives the same output.
    Can somebody point me in the correct direction please?
    --- snip /var/log/Xorg.0.log ---
    [ 11.978] (II) config/udev: Adding input device PS/2 Elantech Mouse (/dev/input/event11)
    [ 11.978] (**) PS/2 Elantech Mouse: Applying InputClass "evdev pointer catchall"
    [ 11.978] (II) Using input driver 'evdev' for 'PS/2 Elantech Mouse'
    [ 11.978] (**) PS/2 Elantech Mouse: always reports core events
    [ 11.978] (**) evdev: PS/2 Elantech Mouse: Device: "/dev/input/event11"
    [ 11.978] (--) evdev: PS/2 Elantech Mouse: Vendor 0x2 Product 0x1
    [ 11.978] (--) evdev: PS/2 Elantech Mouse: Found 3 mouse buttons
    [ 11.978] (--) evdev: PS/2 Elantech Mouse: Found relative axes
    [ 11.978] (--) evdev: PS/2 Elantech Mouse: Found x and y relative axes
    [ 11.978] (II) evdev: PS/2 Elantech Mouse: Configuring as mouse
    [ 11.978] (**) evdev: PS/2 Elantech Mouse: YAxisMapping: buttons 4 and 5
    [ 11.978] (**) evdev: PS/2 Elantech Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 11.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 11.978] (II) XINPUT: Adding extended input device "PS/2 Elantech Mouse" (type: MOUSE, id 12)
    [ 11.978] (II) evdev: PS/2 Elantech Mouse: initialized for relative axes.
    --- snap ---
    Last edited by sonnyka (2012-08-07 16:58:44)

    also see: https://bbs.archlinux.org/viewtopic.php?id=117109

  • Steps to install my dell vostro 1710, where to put them in wiki?

    Hi All,
    I'm planning to reinstall my dell vostro 1710, and I would like to document the steps I have taken to install Arch on it.
    What's the best place for it in the wiki? I'm thinking about this page:
    https://wiki.archlinux.org/index.php/Ca … English%29
    Is this the best place?
    Best regards,
    Cedric

    Yes.

Maybe you are looking for

  • Why does exchange server work for MSN Mail on iPad and not on Mac Mini?

    My MSN Mail works great on my iPad and iPhone but will not work on my Mac Mini? I input the same server address but it will not connect. I've even tried m.hotmail.com, etc. but not joy. Any ideas please?

  • Error message when syncing iPhone 5

    "iPhone cannot be synced an unknown error occurred (-50)". Worked fine last week.  This has never happened before. Any notion? Thanks!

  • Install GoDaddy Wildcard SSL cert on GW WebAccess - ver.8

    I have followed all of the documentation regarding generating a CSR, creating the new eDirectory object from which that CSR is generated, then subsequently downloading and doing the "read from file" SSL cert installation, and it won't validate. I hav

  • Integrating Mobile device with SAP XI

    Hai,        In integrating mobile device with XI.       What are the settings i need to do in ALE settings.       what type of adapter i need to use. please provide complete information related to SAP R/3 settings like 1. logical system 2. rfc destio

  • Reading large PDFs

    Hey everyone. I'm trying to read a few rather large PDFs on my iPhone using FileMagnet, but after I get past page 6 or 7, FileMagnet informs me that there isn't enough memory to load the rest of the file. What can I do to view this, and other large P