Dell vostro 3500 Xorg configuration problem
Hello i have this dell laptop that i dont not know how to configure xorg
Monitor
15.6" 40 cm High definition large screen (1366x768) WLED antireflet (WLAN uniquement)
Graphic Card
Carte graphique : Intel® Integrated Graphics Media Accelerator HD
anyone has any suggestions ?
after a few times i installed the chakra linux and hoping to use its xorg config files but i couldn't find it
thanks in advance
It should work out of the box, witout config files (if there are any - simply remove them).
Otherwise you may have a look here: http://wiki.debian.org/XStrikeForce/HowToRandR12
Similar Messages
-
Dell Vostro 3500 laptop imaging
We are running ZCM10.3.1 on the server. We purchased several new Dell
vostro 3500 laptops with exact same hardware configuration. We created
an image off one of the laptops. Then test the image by pulling the
image down to a different laptop (exactly the same hardware
configuration Dell vostro 3500) and then got the error saying hardware
changed and cannot boot. We put a dell restoration disk to have the
laptop boot into the disk and did repair from the disk. The laptop boot
up fine after the repair.
Can someone give me some idea what might be going on? I am clueless.
Thanks a lot!April,
> We are running ZCM10.3.1 on the server. We purchased several new Dell
> vostro 3500 laptops with exact same hardware configuration. We created
> an image off one of the laptops. Then test the image by pulling the
> image down to a different laptop (exactly the same hardware
> configuration Dell vostro 3500) and then got the error saying hardware
> changed and cannot boot. We put a dell restoration disk to have the
> laptop boot into the disk and did repair from the disk. The laptop boot
> up fine after the repair.
>
Can you try the same thing with the latest imaging (10.3.3 or 11). Ie do a
manual image same/restore with an imaging CD. Saves you having to update
all of your backend.
If it works then, then we will know how to proceed.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms -
MTRR allocation problem on Dell Vostro
Hello good people,
I am having MTRR messages from kernel and a warning that graphics performance may suffer. I know from the sparse mtrr documentation around that I can set them up as I want and everything should work but after trying several changes, the only thing I have managed to do it get a horribly slow laptop.
I am running 64bit Arch on Dell Vostro 3550. I have 6GB ram and a hybrid video card setup with an Intel card and an ATI one. I am using the proprietary Catalyst driver and I also have the intel driver installed.
Here we go...
Kernel message.
$dmesg | grep -i mtrr
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] MTRR variable ranges enabled:
[ 17.262434] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 17.262437] [drm] MTRR allocation failed. Graphics performance may suffer.
I noticed in /proc/config.gz that I don't have MTRR cleanup enabled by default so I tried adding enable_mtrr_cleanup to the boot line but I still don't get a good mtrr.
$zgrep MTRR /proc/config.gz
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
Now here is the mtrr I would like to repair. Notice that the memory range in reg 0 is 8192MB. Why? Reg 3 should be the range for the intel card since that's the address I get from lspci -vv as you will see. Similary, reg 4 is mapping for the ATI radeon card. According to what I have read, I want to have these as write-combining. The other ranges I have no idea why they are there which complicates my attempts at fixing the mtrr.
$cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
reg01: base=0x0cb800000 ( 3256MB), size= 8MB, count=1: uncachable
reg02: base=0x0cc000000 ( 3264MB), size= 64MB, count=1: uncachable
reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable
reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
reg05: base=0x1afe00000 ( 6910MB), size= 2MB, count=1: uncachable
reg06: base=0x1b0000000 ( 6912MB), size= 256MB, count=1: uncachable
reg07: base=0x1c0000000 ( 7168MB), size= 1024MB, count=1: uncachable
Here is the lspci output.
$lspci -vv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f7c0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: f6800000-f78fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 49
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7b20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7b00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f7910000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Finally, here is the Xorg log.
$cat /var/log/Xorg.0.log
[ 22.722]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 22.744] X Protocol Version 11, Revision 0
[ 22.744] Build Operating System: Linux 3.2.2-1-ARCH x86_64
[ 22.744] Current Operating System: Linux bitlab 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[ 22.744] Kernel command line: root=/dev/mapper/arch--volume-lvroot ro
[ 22.744] Build Date: 29 January 2012 03:38:00PM
[ 22.744]
[ 22.744] Current version of pixman: 0.24.4
[ 22.744] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.744] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 19 10:29:00 2012
[ 22.807] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.828] (==) ServerLayout "aticonfig Layout"
[ 22.828] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 22.828] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 22.829] (**) | |-->Device "aticonfig-Device[0]-0"
[ 22.829] (==) Automatically adding devices
[ 22.829] (==) Automatically enabling devices
[ 22.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.881] Entry deleted from font path.
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.882] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.882] (II) Loader magic: 0x7ccae0
[ 22.882] (II) Module ABI versions:
[ 22.882] X.Org ANSI C Emulation: 0.4
[ 22.882] X.Org Video Driver: 11.0
[ 22.882] X.Org XInput driver : 13.0
[ 22.882] X.Org Server Extension : 6.0
[ 22.883] (--) PCI:*(0:0:2:0) 8086:0126:1028:04cd rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 22.883] (--) PCI: (0:1:0:0) 1002:6741:1028:04cd rev 0, Mem @ 0xe0000000/268435456, 0xf7b20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 22.883] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.883] (II) "extmod" will be loaded by default.
[ 22.883] (II) "dbe" will be loaded by default.
[ 22.883] (II) "glx" will be loaded by default.
[ 22.883] (II) "record" will be loaded by default.
[ 22.883] (II) "dri" will be loaded by default.
[ 22.883] (II) "dri2" will be loaded by default.
[ 22.883] (II) LoadModule: "extmod"
[ 22.934] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.935] (II) Module extmod: vendor="X.Org Foundation"
[ 22.935] compiled for 1.11.4, module version = 1.0.0
[ 22.935] Module class: X.Org Server Extension
[ 22.935] ABI class: X.Org Server Extension, version 6.0
[ 22.935] (II) Loading extension MIT-SCREEN-SAVER
[ 22.935] (II) Loading extension XFree86-VidModeExtension
[ 22.935] (II) Loading extension XFree86-DGA
[ 22.935] (II) Loading extension DPMS
[ 22.935] (II) Loading extension XVideo
[ 22.935] (II) Loading extension XVideo-MotionCompensation
[ 22.935] (II) Loading extension X-Resource
[ 22.935] (II) LoadModule: "dbe"
[ 22.935] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.936] (II) Module dbe: vendor="X.Org Foundation"
[ 22.936] compiled for 1.11.4, module version = 1.0.0
[ 22.936] Module class: X.Org Server Extension
[ 22.936] ABI class: X.Org Server Extension, version 6.0
[ 22.936] (II) Loading extension DOUBLE-BUFFER
[ 22.936] (II) LoadModule: "glx"
[ 22.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.951] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 22.951] compiled for 6.9.0, module version = 1.0.0
[ 22.952] (II) Loading extension GLX
[ 22.952] (II) LoadModule: "record"
[ 22.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.957] (II) Module record: vendor="X.Org Foundation"
[ 22.957] compiled for 1.11.4, module version = 1.13.0
[ 22.957] Module class: X.Org Server Extension
[ 22.957] ABI class: X.Org Server Extension, version 6.0
[ 22.957] (II) Loading extension RECORD
[ 22.957] (II) LoadModule: "dri"
[ 22.958] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.965] (II) Module dri: vendor="X.Org Foundation"
[ 22.965] compiled for 1.11.4, module version = 1.0.0
[ 22.965] ABI class: X.Org Server Extension, version 6.0
[ 22.965] (II) Loading extension XFree86-DRI
[ 22.965] (II) LoadModule: "dri2"
[ 22.965] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.966] (II) Module dri2: vendor="X.Org Foundation"
[ 22.966] compiled for 1.11.4, module version = 1.2.0
[ 22.966] ABI class: X.Org Server Extension, version 6.0
[ 22.966] (II) Loading extension DRI2
[ 22.966] (II) LoadModule: "fglrx"
[ 22.966] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.148] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 23.154] compiled for 1.4.99.906, module version = 8.96.4
[ 23.154] Module class: X.Org Video Driver
[ 23.156] (II) Loading sub module "fglrxdrm"
[ 23.156] (II) LoadModule: "fglrxdrm"
[ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.183] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.183] compiled for 1.4.99.906, module version = 8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Release Identifier: 8.961
[ 23.192] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2012 23:06:21
[ 23.192] (++) using VT number 7
[ 23.195] (WW) Falling back to old probe method for fglrx
[ 23.260] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.263] (--) Chipset Supported AMD Graphics Processor (0x6741) found
[ 23.264] (II) fglrx: intel VGA device detected, load intel driver.
[ 23.264] (II) LoadModule: "intel"
[ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.296] (II) Module intel: vendor="X.Org Foundation"
[ 23.296] compiled for 1.11.2, module version = 2.17.0
[ 23.296] Module class: X.Org Video Driver
[ 23.296] ABI class: X.Org Video Driver, version 11.0
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 23.298] ukiOpenDevice: node name is /dev/ati/card0
[ 23.298] ukiOpenDevice: open result is 7, (OK)
[ 23.298] ukiOpenByBusid: ukiOpenMinor returns 7
[ 23.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 23.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.301] (II) AMD Video driver is signed
[ 23.301] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.301] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.301] (II) fglrx(0): pEnt->device->identifier=0x100a450
[ 23.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.302] (II) intel(1): pEnt->device->identifier=(nil)
[ 23.302] (EE) Screen 1 deleted because of no matching config section.
[ 23.302] (II) UnloadModule: "intel"
[ 23.302] (II) Unloading intel
[ 23.302] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 23.302] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 23.798] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: drmOpenMinor returns 12
[ 23.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.801] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.801] (==) fglrx(0): RGB weight 888
[ 23.801] (==) fglrx(0): Default visual is TrueColor
[ 23.802] (**) fglrx(0): Option "Tiling" "off"
[ 23.802] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 23.802] (**) fglrx(0): Option "Shadow" "off"
[ 23.802] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.802] (**) fglrx(0): ChipID override: 0x0126
[ 23.802] (**) fglrx(0): ChipRev override: 9
[ 23.802] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 23.802] (**) fglrx(0): Relaxed fencing enabled
[ 23.802] (**) fglrx(0): Wait on SwapBuffers? enabled
[ 23.802] (**) fglrx(0): Triple buffering? enabled
[ 23.802] (**) fglrx(0): Framebuffer linear
[ 23.802] (**) fglrx(0): Pixmaps linear
[ 23.802] (**) fglrx(0): 3D buffers tiled
[ 23.802] (**) fglrx(0): SwapBuffers wait enabled
[ 23.802] (==) fglrx(0): video overlay key set to 0x101fe
[ 23.802] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[ 23.802] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 23.802] (II) fglrx(0): Output VGA1 has no monitor section
[ 23.825] (II) fglrx(0): Output HDMI1 has no monitor section
[ 23.863] (II) fglrx(0): Output DP1 has no monitor section
[ 23.863] (II) fglrx(0): EDID for output LVDS1
[ 23.863] (II) fglrx(0): Manufacturer: LGD Model: 2e3 Serial#: 0
[ 23.863] (II) fglrx(0): Year: 2010 Week: 0
[ 23.863] (II) fglrx(0): EDID Version: 1.4
[ 23.863] (II) fglrx(0): Digital Display Input
[ 23.863] (II) fglrx(0): 6 bits per channel
[ 23.863] (II) fglrx(0): Digital interface is undefined
[ 23.863] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 23.863] (II) fglrx(0): Gamma: 2.20
[ 23.863] (II) fglrx(0): No DPMS capabilities specified
[ 23.863] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.863] (II) fglrx(0): First detailed timing is preferred mode
[ 23.863] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 23.863] (II) fglrx(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
[ 23.863] (II) fglrx(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
[ 23.863] (II) fglrx(0): Manufacturer's mask: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 76.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 810 v_border: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 51.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 814 v_border: 0
[ 23.863] (II) fglrx(0): PPCTF156WH4
[ 23.863] (II) fglrx(0): Unknown vendor-specific block 0
[ 23.863] (II) fglrx(0): EDID (in hex):
[ 23.863] (II) fglrx(0): 00ffffffffffff0030e4e30200000000
[ 23.863] (II) fglrx(0): 00140104902213780a09159d5f599b27
[ 23.863] (II) fglrx(0): 19505400000001010101010101010101
[ 23.863] (II) fglrx(0): 010101010101b01d56c650002a302430
[ 23.863] (II) fglrx(0): 350058c210000019ec1356c650002e30
[ 23.863] (II) fglrx(0): 2430350058c210000019000000fe0050
[ 23.863] (II) fglrx(0): 50435446803135365748340a00000000
[ 23.863] (II) fglrx(0): 00004131960000000001010a202000ef
[ 23.863] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 23.863] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Printing probed modes for output LVDS1
[ 23.863] (II) fglrx(0): Modeline "1366x768"x60.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x40.1 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.863] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.863] (II) fglrx(0): EDID for output VGA1
[ 23.887] (II) fglrx(0): EDID for output HDMI1
[ 23.926] (II) fglrx(0): EDID for output DP1
[ 23.973] (II) fglrx(0): Output LVDS1 connected
[ 23.973] (II) fglrx(0): Output VGA1 disconnected
[ 23.973] (II) fglrx(0): Output HDMI1 disconnected
[ 23.973] (II) fglrx(0): Output DP1 disconnected
[ 23.973] (II) fglrx(0): Using exact sizes for initial modes
[ 23.973] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
[ 23.973] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.973] (II) fglrx(0): Kernel page flipping support detected, enabling
[ 23.973] (**) fglrx(0): Display dimensions: (340, 190) mm
[ 23.973] (**) fglrx(0): DPI set to (102, 102)
[ 23.973] (II) Loading sub module "fb"
[ 23.973] (II) LoadModule: "fb"
[ 23.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.133] (II) Module fb: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.0.0
[ 24.133] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.133] (II) Loading sub module "dri2"
[ 24.133] (II) LoadModule: "dri2"
[ 24.133] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.133] (II) Module dri2: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.2.0
[ 24.133] ABI class: X.Org Server Extension, version 6.0
[ 24.133] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.133] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.133] (==) fglrx(0): Default visual is TrueColor
[ 24.133] (**) fglrx(0): Option "DPMS" "true"
[ 24.133] (==) fglrx(0): RGB weight 888
[ 24.133] (II) fglrx(0): Using 8 bits per RGB
[ 24.133] (==) fglrx(0): Buffer Tiling is ON
[ 24.133] (II) Loading sub module "fglrxdrm"
[ 24.133] (II) LoadModule: "fglrxdrm"
[ 24.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.133] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.133] compiled for 1.4.99.906, module version = 8.96.4
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.134] ukiOpenDevice: node name is /dev/ati/card0
[ 24.134] ukiOpenDevice: open result is 13, (OK)
[ 24.134] ukiOpenByBusid: ukiOpenMinor returns 13
[ 24.134] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.135] (**) fglrx(0): NoAccel = NO
[ 24.135] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.135] (--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
[ 24.135] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x04cd)
[ 24.135] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.135] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 24.135] (--) fglrx(0): MMIO registers at 0xf7b20000
[ 24.135] (--) fglrx(0): I/O port at 0x0000e000
[ 24.135] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.157] (II) fglrx(0): AC Adapter is used
[ 24.236] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 24.236] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 24.236] (II) fglrx(0): PCIE card detected
[ 24.236] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 24.236] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 24.241] (II) fglrx(0): Using adapter: 1:0.0.
[ 24.248] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 24.274] (II) fglrx(0): Interrupt handler installed at IRQ 55.
[ 24.274] (II) fglrx(0): RandR 1.2 support is enabled!
[ 24.274] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 24.274] (==) fglrx(0): Center Mode is disabled
[ 24.274] (II) Loading sub module "fb"
[ 24.274] (II) LoadModule: "fb"
[ 24.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.274] (II) Module fb: vendor="X.Org Foundation"
[ 24.274] compiled for 1.11.4, module version = 1.0.0
[ 24.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.274] (II) Loading sub module "ddc"
[ 24.274] (II) LoadModule: "ddc"
[ 24.274] (II) Module "ddc" already built-in
[ 24.388] (II) fglrx(0): Finished Initialize PPLIB!
[ 24.396] (II) fglrx(0): Eyefinity capable adapter detected.
[ 24.397] (II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 6 configurable heads and 0 displays connected.
[ 24.397] (==) fglrx(0): PseudoColor visuals disabled
[ 24.397] (II) Loading sub module "ramdac"
[ 24.397] (II) LoadModule: "ramdac"
[ 24.397] (II) Module "ramdac" already built-in
[ 24.397] (==) fglrx(0): NoDRI = NO
[ 24.397] (==) fglrx(0): Capabilities: 0x00000000
[ 24.397] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 24.397] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 24.397] (==) fglrx(0): UseFastTLS=0
[ 24.397] (--) Depth 24 pixmap format is 32 bpp
[ 24.397] (II) LoadModule: "glesx"
[ 24.458] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 24.594] (II) Module glesx: vendor="X.Org Foundation"
[ 24.594] compiled for 1.4.99.906, module version = 1.0.0
[ 24.594] (II) Loading extension GLESX
[ 24.606] (II) fglrx(0): [DRI2] Setup complete
[ 24.606] (II) fglrx(0): [DRI2] DRI driver: i965
[ 24.606] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
[ 24.610] (II) UXA(0): Driver registered support for the following operations:
[ 24.610] (II) solid
[ 24.610] (II) copy
[ 24.610] (II) composite (RENDER acceleration)
[ 24.610] (II) put_image
[ 24.610] (II) get_image
[ 24.610] (==) fglrx(0): Backing store disabled
[ 24.610] (==) fglrx(0): Silken mouse enabled
[ 24.610] (II) fglrx(0): Initializing HW Cursor
[ 24.666] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.667] (**) fglrx(0): DPMS enabled
[ 24.667] (==) fglrx(0): Intel XvMC decoder enabled
[ 24.667] (II) fglrx(0): Set up textured video
[ 24.667] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[ 24.667] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 24.667] (WW) fglrx(0): Option "VendorName" is not used
[ 24.667] (WW) fglrx(0): Option "ModelName" is not used
[ 24.667] (WW) fglrx(0): Option "Shadow" is not used
[ 24.667] (WW) fglrx(0): Option "Tiling" is not used
[ 24.667] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.667] (==) fglrx(0): hotplug detection: "enabled"
[ 24.668] (II) Loading extension ATIFGLRXDRI
[ 24.668] (II) fglrx(0): doing swlDriScreenInit
[ 24.668] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.668] ukiOpenDevice: node name is /dev/ati/card0
[ 24.668] ukiOpenDevice: open result is 15, (OK)
[ 24.668] ukiOpenByBusid: ukiOpenMinor returns 15
[ 24.668] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.668] (II) fglrx(0): [uki] DRM interface version 1.0
[ 24.668] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 24.668] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 24.668] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9e27b95000
[ 24.668] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 24.668] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 24.668] (II) fglrx(0): swlDriScreenInit done
[ 24.668] (II) fglrx(0): Kernel Module Version Information:
[ 24.668] (II) fglrx(0): Name: fglrx
[ 24.668] (II) fglrx(0): Version: 8.96.4
[ 24.668] (II) fglrx(0): Date: Apr 5 2012
[ 24.668] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 24.668] (II) fglrx(0): Kernel Module version matches driver.
[ 24.668] (II) fglrx(0): Kernel Module Build Time Information:
[ 24.668] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.3.6-1-ARCH
[ 24.668] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 24.668] (II) fglrx(0): Build-Kernel __SMP__: no
[ 24.668] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 24.668] (II) fglrx(0): [uki] register handle = 0x00004000
[ 24.699] (II) fglrx(0): DRI initialization successfull
[ 24.699] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
[ 24.699] (II) fglrx(0): Intel display surface mc addr for AMD: 8fce0000
[ 24.700] (==) fglrx(0): Backing store disabled
[ 24.700] (II) Loading extension FGLRXEXTENSION
[ 24.700] (**) fglrx(0): DPMS enabled
[ 24.700] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 24.700] (**) fglrx(0): Textured Video is enabled.
[ 24.700] (II) fglrx(0): GLESX enableFlags = 848
[ 24.700] (II) fglrx(0): GLESX is enabled
[ 24.700] (II) LoadModule: "amdxmm"
[ 24.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 24.709] (II) Module amdxmm: vendor="X.Org Foundation"
[ 24.709] compiled for 1.4.99.906, module version = 2.0.0
[ 24.709] (II) Loading extension AMDXVOPL
[ 24.709] (II) Loading extension AMDXVBA
[ 24.709] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 24.721] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 24.723] (II) fglrx(0): Enable composite support successfully
[ 24.723] (WW) fglrx(0): Option "VendorName" is not used
[ 24.723] (WW) fglrx(0): Option "ModelName" is not used
[ 24.723] (WW) fglrx(0): Option "Shadow" is not used
[ 24.723] (WW) fglrx(0): Option "Tiling" is not used
[ 24.723] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.723] (II) fglrx(0): X context handle = 0x1
[ 24.723] (II) fglrx(0): [DRI] installation complete
[ 24.736] (--) RandR disabled
[ 24.736] (II) Initializing built-in extension Generic Event Extension
[ 24.736] (II) Initializing built-in extension SHAPE
[ 24.736] (II) Initializing built-in extension MIT-SHM
[ 24.736] (II) Initializing built-in extension XInputExtension
[ 24.736] (II) Initializing built-in extension XTEST
[ 24.736] (II) Initializing built-in extension BIG-REQUESTS
[ 24.736] (II) Initializing built-in extension SYNC
[ 24.736] (II) Initializing built-in extension XKEYBOARD
[ 24.736] (II) Initializing built-in extension XC-MISC
[ 24.736] (II) Initializing built-in extension SECURITY
[ 24.736] (II) Initializing built-in extension XINERAMA
[ 24.736] (II) Initializing built-in extension XFIXES
[ 24.736] (II) Initializing built-in extension RENDER
[ 24.736] (II) Initializing built-in extension RANDR
[ 24.736] (II) Initializing built-in extension COMPOSITE
[ 24.736] (II) Initializing built-in extension DAMAGE
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.737] ukiOpenDevice: node name is /dev/ati/card0
[ 24.737] ukiOpenDevice: open result is 16, (OK)
[ 24.737] ukiOpenByBusid: ukiOpenMinor returns 16
[ 24.737] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.513] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 25.597] (II) fglrx(0): Enable the clock gating!
[ 25.597] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 25.834] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 25.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.834] (II) LoadModule: "evdev"
[ 25.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (II) Module evdev: vendor="X.Org Foundation"
[ 25.840] compiled for 1.10.99.902, module version = 2.6.0
[ 25.840] Module class: X.Org XInput Driver
[ 25.840] ABI class: X.Org XInput driver, version 13.0
[ 25.840] (II) Using input driver 'evdev' for 'Power Button'
[ 25.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (**) Power Button: always reports core events
[ 25.840] (**) Power Button: Device: "/dev/input/event6"
[ 25.840] (--) Power Button: Found keys
[ 25.840] (II) Power Button: Configuring as keyboard
[ 25.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 25.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.840] (**) Option "xkb_rules" "evdev"
[ 25.840] (**) Option "xkb_model" "evdev"
[ 25.840] (**) Option "xkb_layout" "us"
[ 25.868] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 25.868] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.868] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.868] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event12"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 25.869] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event11"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input11/event11"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.869] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Power Button'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Power Button: always reports core events
[ 25.869] (**) Power Button: Device: "/dev/input/event4"
[ 25.869] (--) Power Button: Found keys
[ 25.869] (II) Power Button: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 25.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 25.870] (II) No input driver specified, ignoring this device.
[ 25.870] (II) This device may have been added with another device file.
[ 25.870] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 25.870] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Sleep Button: always reports core events
[ 25.870] (**) Sleep Button: Device: "/dev/input/event5"
[ 25.870] (--) Sleep Button: Found keys
[ 25.870] (II) Sleep Button: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 25.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event8)
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: always reports core events
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event8"
[ 25.870] (--) Laptop_Integrated_Webcam_FHD: Found keys
[ 25.870] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
[ 25.870] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 11)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 25.871] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 25.871] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.871] (**) Logitech USB Receiver: always reports core events
[ 25.871] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[ 25.871] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 25.871] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.871] (--) Logitech USB Receiver: Found relative axes
[ 25.871] (--) Logitech USB Receiver: Found x and y relative axes
[ 25.871] (II) Logitech USB Receiver: Configuring as mouse
[ 25.871] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.871] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.871] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
[ 25.871] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 25.871] (II) Logitech USB Receiver: initialized for relative axes.
[ 25.871] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 25.872] (II) No input driver specified, ignoring this device.
[ 25.872] (II) This device may have been added with another device file.
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 25.872] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) Logitech USB Receiver: always reports core events
[ 25.872] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 25.872] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 25.872] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.872] (--) Logitech USB Receiver: Found relative axes
[ 25.872] (--) Logitech USB Receiver: Found absolute axes
[ 25.872] (--) Logitech USB Receiver: Found keys
[ 25.872] (II) Logitech USB Receiver: Configuring as mouse
[ 25.872] (II) Logitech USB Receiver: Configuring as keyboard
[ 25.872] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.872] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.872] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.1/input/input2/event2"
[ 25.872] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 25.872] (**) Option "xkb_rules" "evdev"
[ 25.872] (**) Option "xkb_model" "evdev"
[ 25.872] (**) Option "xkb_layout" "us"
[ 25.872] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 25.872] (II) Logitech USB Receiver: initialized for absolute axes.
[ 25.872] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.872] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.872] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.872] (--) AT Translated Set 2 keyboard: Found keys
[ 25.872] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 25.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 25.873] (**) Option "xkb_rules" "evdev"
[ 25.873] (**) Option "xkb_model" "evdev"
[ 25.873] (**) Option "xkb_layout" "us"
[ 25.873] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 25.873] (II) LoadModule: "synaptics"
[ 25.873] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.883] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.884] compiled for 1.11.0, module version = 1.5.0
[ 25.884] Module class: X.Org XInput Driver
[ 25.884] ABI class: X.Org XInput driver, version 13.0
[ 25.884] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 25.884] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "Device" "/dev/input/event10"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 25.884] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 25.884] (**) Option "TapButton1" "1"
[ 25.884] (**) Option "TapButton2" "2"
[ 25.884] (**) Option "TapButton3" "3"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 25.884] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.885] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
[ 25.885] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 25.885] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) DualPoint Stick: always reports core events
[ 25.885] (**) DualPoint Stick: Device: "/dev/input/event9"
[ 25.885] (--) DualPoint Stick: Found 3 mouse buttons
[ 25.885] (--) DualPoint Stick: Found relative axes
[ 25.885] (--) DualPoint Stick: Found x and y relative axes
[ 25.885] (II) DualPoint Stick: Configuring as mouse
[ 25.885] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 25.885] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 25.885] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
[ 25.885] (II) DualPoint Stick: initialized for relative axes.
[ 25.885] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 25.885] (**) DualPoint Stick: (accel) acceleration profile 0
[ 25.885] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 25.885] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 25.885] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.885] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) Dell WMI hotkeys: always reports core events
[ 25.885] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[ 25.885] (--) Dell WMI hotkeys: Found keys
[ 25.885] (II) Dell WMI hotkeys: Configuring as keyboard
[ 25.885] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 25.885] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 25.885] (**) Option "xkb_rules" "evdev"
[ 25.886] (**) Option "xkb_model" "evdev"
[ 25.886] (**) Option "xkb_layout" "us"
[ 25.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 39.128] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 39.128] (II) fglrx(0): Printing DDC gathered Modelines:
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 52.382] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 52.382] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 53.649] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 53.649] (II) fglrx(0): Printing DDC gathered Modelines:
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.483] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.483] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.551] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.551] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.619] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.619] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.686] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.686] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.751] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.751] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.816] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.816] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.900] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.900] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.376] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.377] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.459] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.459] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.459] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.460] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.547] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.547] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.625] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.625] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.697] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.697] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0Hello,
i get the same messages without any problems for my intel card.
You can read more about it in this thread:
http://forums.gentoo.org/viewtopic-t-85 … ec66f93bf2
There are a fair amount of people who have posted their /proc/mtrr there, you can compare yours to them.
In the end they come to the conclusion, that uncachable entries are not a problem, for the most systems.
However uncachable regions of 1024MB seem to be too large.
On my mtrr the biggest uncachable entry is 64MB.
So you might get improvement from solving this. -
[SOLVED] Xorg problem: fglrx, startx & Xorg -configure
Hi,
On a HP 8510p notebook (Core 2 Duo, AMD/ATI Mobility Radeon HD 2600)
I have just installed Arch Linux, did a system update (pacman -Syu), installed the catalyst package, which depends on xorg-server, among others.
When I do a "Xorg -configure" it fails with a "Fatal server error: Caught signal 11. Server aborting". As I see in /var/log/Xorg.0.log, I don't get an (EE)/error. I just can' understand why the X server fails.
/var/log/Xorg.0.log - with no /etc/X11/xorg.conf file
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:09:40 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
Backtrace:
0: Xorg(xf86SigHandler+0x7e) [0x80d9d5e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb792a5ab]
3: Xorg(DoConfigure+0x211) [0x80dc9f1]
4: Xorg(InitOutput+0x61a) [0x80a7a9a]
5: Xorg(main+0x296) [0x8073b66]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cd5390]
7: Xorg(FontFileCompleteXLFD+0x201) [0x80730d1]
Fatal server error:
Caught signal 11. Server aborting
Obs: When I do a "startx", with a custom and minimalist xorg.conf, my notebook stops to respond (doesn't function Ctrl-Alt-Backspace, Alt-F2,3..., Ctrl-C... noting) and the screen is all black.
But first, I think it should work the "Xorg -configure"
Last edited by Claudiu2EE (2007-11-30 18:45:20)Hi!
I'll post some more information...
When I do "startx", like I said, it seems that X is starting, the display changes from grey to black and dark-grey again... but then I can't do nothing to exit, but to press the power button.
So, as no "hwd -x" (uses lshwd -> Segmentation fault) or "Xorg -configure" (Caught signal 11. Server aborting) works, I wrote a xorg.conf by 0, googleing around and inspiring me from the Arch Wiki.
I have no ~/.xinitrc (I have tried with one who had an exec xterm, but no success)
Package information:
xorg-server 1.4-5
xorg-xinit 1.0.7-1
xorg-twm 1.0.1-2
xterm 229-2
catalyst 7.11-1
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi/:unscaled"
#FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/75dpi"
# path to defoma fonts
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "AIGLX" "off"
EndSection
Section "Module"
#Load "dri" # direct rendering infrastructure which makes opengl go fast
Load "glx" # glx and glcore implement opengl
#Load "GLcore"
Load "extmod" # collection of X protocol extentions that shouldn't even be loadable
#Load "int10" # vesa bios interface for card setup stuff
#Load "vbe"
#Load "i2c" # serial bus over which you speak the ddc protocol to get info from the monitor
Load "ddc"
Load "freetype" # load freetype fonts and type 1 fonts
Load "type1"
Load "dbe"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
Section "InputDevice"
Identifier "Generic Notebook Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Generic USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon HD 2600"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Notebook Monitor"
ModelName "AUO LCD MONITOR"
VendorName "AUO"
DisplaySize 331 207
VertRefresh 43-60
HorizSync 30-62
Option "DPMS"
# UseModes "Widescreen Modes"
EndSection
#Section "Modes"
# Identifier "Widescreen Modes"
# Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Mobility Radeon HD 2600"
Monitor "Generic Notebook Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Notebook Keyboard" "CoreKeyboard"
#InputDevice "Generic USB Mouse"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 25 13:34:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Notebook Monitor"
(**) | |-->Device "AMD Radeon 2600HD"
(**) |-->Input Device "Generic Notebook Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8206b38
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[25] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[26] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[27] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[28] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[29] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[35] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[36] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[37] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[38] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[39] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[40] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[41] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[42] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[43] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[44] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[45] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[46] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[48] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe4400000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.56
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1417 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 815 v_border: 0
(II) fglrx(0): AUO
(II) fglrx(0): B154EW02 V0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0006af742000000000
(II) fglrx(0): 01100103802115780a1cf59758508e27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101121b008950200f303020
(II) fglrx(0): 36004bcf100000180000000f00000000
(II) fglrx(0): 00000000000000000020000000fe0041
(II) fglrx(0): 554f0a202020202020202020000000fe
(II) fglrx(0): 004231353445573032205630200a007f
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Display dimensions: (331, 207) mm
(**) fglrx(0): DPI set to (98, 98)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4400000 - 0xe440ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[7] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[8] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[9] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[10] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[11] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[12] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[13] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[14] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[15] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[16] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[17] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[18] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[19] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[20] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[24] 0 0 0x00004000 - 0x000040ff (0x100) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[27] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[28] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[29] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[30] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[31] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[32] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[37] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[38] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[39] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[40] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[41] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[42] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[43] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[44] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[45] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[46] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[47] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[48] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[49] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.43.2
(II) fglrx(0): Date: Nov 9 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000400
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3277)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2477
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 10
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 60000001
...dwIRQEnableId: 00000006
Receive enable interrupt ret message
...irqEnableMask: 00000040
...dwIRQEnableId: 00000007
Receive enable interrupt ret message
...irqEnableMask: ff00002c
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: ff00002d
...dwIRQEnableId: 00000009
Receive enable interrupt ret message
...irqEnableMask: 20000400
...dwIRQEnableId: 0000000a
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Enable the clock gating
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Please, assist me in this problem.
Thank you. -
[Solved] Xorg Error Dell Vostro 3700
Hi guys,
I have been using Arch for quite a few years. I just got a new laptop in the form of a Dell Vostro 3700 with a Nvidia GT 330m.
When I go to start X I get an error saying that "no screens are found". I have "nvidia" and "nvidia-utils" installed. I am thinking this
is a driver issue as Dell computers do not support drivers straight from nvidia.
Any advice would be appreciated.
Cheers
Last edited by serideth (2010-12-09 13:09:25)I will try the Nouveau driver, It has switchable graphics (which wasn't listed by Dell when I bought it) and the switching happens automatically when I plug in the AC (meaning I don't have to log out to switch like the old switchable graphics) but I am not sure whether it is Optimus (No mention by Dell that it is Optimus enabled).
Edit.
Just confirmed out that It DOES have switchable GPU's and Nvidia Optimus which you would think Dell would have advertised in giant writing on their website.
So now to setup arch with the Intel drivers.
I will let you know how it goes.
Second Edit.
Installed the xf86-video-intel drivers and its working now. Attempting to use the Nouveau or the official Nvidia drivers causes Xorg to return the previous error. This seems to be an incompatibility issue with laptops with switchable graphics and/or Nvidia Optimus. Linux can only utilize the Intel IGP, which is fine for me since I will only use my Arch install to code and leave gaming to W7 with Steam, however if you are planning on using Linux as your primary/only OS on your laptop with switchable graphics/Optimus be advised you will only be able to use the integrated graphics. A fix does not appear to be coming anytime soon either.
Thanks for everyone's help.
Cheers
Last edited by serideth (2010-12-09 13:14:26) -
Solaris 8 on Dell Inspiron 3500 ?
Hi!
Is there anyone who successfully installed Solaris 8 on a Dell Inspiron 3500 laptop? The problem is with the video card (NeoMagic) which is not automaticaly recognized by Solaris installer.
Thanks for any advices,
ClaudiuI am trying to install on a Dell Latitude laptop. I cant get very far though. Please see below:
I'm quite familiar with Solaris 8 and have done numerous installs
including dual boot on x86, and jumpstarts on Ultras.
I am trying to install x86 on a Dell laptop. No problems with setting up
the bios, and telling it to boot into the Solaris install menu. (from 1
of 2 cd)
My problem is this:
When I get to the language preference question, my keyboard mapping is
shot. I've tried numlock off and on, and used 3 different keyboards.
Laptop keyboard out of docking station, and two different keyboards
while the Dell is docked.
Funny thing is, the mapping is fine until the point where the install
program wants language preferences entered. I tried various keys and the
whole mapping of the keys on the board is off.
As I mentioned, in the earlier phase of the install program, when it
asks if you want Jumpstart, the mapping is fine. I did not have this
problem on my x86 install on my tower, (same keyboard tested as bad on
the Dell) and used the exact same cd's (1 of 2) that sun sent.
So I tried to configure Jumpstart to get around the mapping. Booted the
Dell bios to boot from the network using BOOTP, which is the core
protocol that Jumpstart uses. No go. Used the procedure from the Sun
Admin 2 class, it is proven to work on an Ultra environment. No go on
x86 though.
Any suggestions?
Thanks much,
Sam -
Elantech Touchpad Detected As PS/2 Elantech Mouse (Dell Vostro 3560)
Dear community,
I am facing troubles with my Dell Vostro 3560's Elantech Touchpad. It gets detected as PS/2 Elantech mouse.
[acs@einherij ~]$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PS/2 Elantech Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Laptop_Integrated_Webcam_E4HD id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
Testwise. I installed from AUR the "psmouse-elantech" package (as mentioned in the Touchpad Synaptics article). After reboot, no effect at all, xinput gives the same output.
Can somebody point me in the correct direction please?
--- snip /var/log/Xorg.0.log ---
[ 11.978] (II) config/udev: Adding input device PS/2 Elantech Mouse (/dev/input/event11)
[ 11.978] (**) PS/2 Elantech Mouse: Applying InputClass "evdev pointer catchall"
[ 11.978] (II) Using input driver 'evdev' for 'PS/2 Elantech Mouse'
[ 11.978] (**) PS/2 Elantech Mouse: always reports core events
[ 11.978] (**) evdev: PS/2 Elantech Mouse: Device: "/dev/input/event11"
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Vendor 0x2 Product 0x1
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found 3 mouse buttons
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found relative axes
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found x and y relative axes
[ 11.978] (II) evdev: PS/2 Elantech Mouse: Configuring as mouse
[ 11.978] (**) evdev: PS/2 Elantech Mouse: YAxisMapping: buttons 4 and 5
[ 11.978] (**) evdev: PS/2 Elantech Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 11.978] (II) XINPUT: Adding extended input device "PS/2 Elantech Mouse" (type: MOUSE, id 12)
[ 11.978] (II) evdev: PS/2 Elantech Mouse: initialized for relative axes.
--- snap ---
Last edited by sonnyka (2012-08-07 16:58:44)also see: https://bbs.archlinux.org/viewtopic.php?id=117109
-
Dell Vostro 1400 laptop will not boot Zen imaging
Got a new Dell Vostro 1400 laptop today to find it has problems with
ZENworks imaging.
I can pxe boot the laptop and it will attempt to install the imaging
software from
the server but fail and present me with the Linuxrc screen.
Navigating through the options results in a DHCP configuration failed
error.
Can anyone point me in the right direction?
Is there a hotfix available?
thanks.
zen_padawanzendude;2862314 Wrote:
> Try to load the driver tg3.ko and see if it works with this driver and
> you boot from the cd (pxe will not work because you can't get out of
> linuxrc, actually you might be able to do it, but I found the menu to
> be really confusing. Go It looks like is a broadcom 59xx series.>
Code:
> > # modprobe tg3
> >
> If the driver tg3 works then you need to add the newid option in the
> append section of the isolinux.cfg or linuxrc.config. Check the
> forums for more info about newid option.
I have loaded this driver and added the newid=0x14e4 0x1713 but still
no luck. Still can not ping the Zenworks server or do anything. The
Network lights stay lit when it tries to obtain an IP address for eth0.
I read on another site that you need to update the initrd with the new
tg3.ko driver. I will try this later tonight and see what happens.
Cheers
Chadinsky -
[solved] Xorg -configuration crashes (signal 11)
I've been trying to get Xorg to work all day without success. What I've been doing:
* Install archlinux from scratch
* Upgrade with pacman -Syu
* Install Xorg
* Install fglrx
* Run Xorg -configure.
This is when it crashes with the following output:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux twarkie 2.6.22-ARCH #1 SMP PREEMPT Tue Sep 25 19:18:19 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 22:11:11 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 0000,0000 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 10de,0c11 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 10de,0c11 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 10de,0c11 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:05:0: chip 10de,00df card 10de,0c11 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10de,00e5 card f0de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:09:0: chip 10de,00ee card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0a:0: chip 10de,00e3 card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4152 card 174b,7c29 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4172 card 174b,7c28 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0b:0: chip 1412,1724 card 3031,4553 rev 01 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xd8000000/27, 0xe8030000/16, I/O @ 0xb000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xe8020000/16
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.40.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[5] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[6] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[7] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[9] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[16] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[17] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[19] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[20] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[21] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[22] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[23] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[24] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[30] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[34] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.40.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.402
(II) ATI Proprietary Linux Driver Build Date: Jul 31 2007 22:20:14
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
Fatal server error:
Caught signal 11. Server aborting
If I enable the testing repository and perform a full system upgrade, I can get X to work with the open source drivers for ATI. But I need to get fglrx to work in order to use tv-out. So there seem to be a problem with Xorg itself, not the driver in this case.
Any ideas?
Last edited by twarkie (2007-09-26 23:45:54)Well, in your previous log, the crash backtrace:
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
died inside /usr/lib/xorg/modules/drivers/fglrx_drv.so - so I figured if you removed fglrx, Xorg -configure wouldn't try to use that module, and the crash would go away. I'm glad I guessed right.
Could you please add [solved] to your topic title? -
Hello all,
my Laptop (Dell Vostro - running XP SP3) neither recognizes my iPad 2 nor my iPhone 4!
Both devices are working correctly with my desktop PC running Vista with the same USB cable!
I followed trouble shooting guides, checked that the drivers are present, installed, removed and reinstalled the latest iTunes (in the correct order together with the other Apple software components) etc. but nothing works! The interesting thing is that when I plug the iPad or the iPhone in the laptop's usb-port for a second Windows correctly shows the devices either as iPad or iPhone in the "Device Manager" with an exclamation point !!! But then after a split second Windows allways switches the devices to Digital Camera and the correct iPad or iPhone disappears !!! => That is why I guess that this is a driver problem!
Does anybody have any idea what else I can try?
Is there a manual way to install the drivers for the iPad 2 or iPhone 4?
Many thanks for your ideas and suggestions
EdgarYes I know that (I always google first and ask later ). Too bad I find this out when it was too late. I was already on 4.3.
-
hi
I have a working X-desktop with awesomeWM.
problem is, my X only works without a xorg.conf, not with the Xorg -configure one or a minimalistic one.
I have an intel 4500mhd graphic device, installed xf86-video-intel and evdev input devices.
KMS, hal and dbus are all loaded and running.
I need a working .conf file to set new font paths and I want to enable my hdmi output with xrandr.
this is my xorg log file when I start X without a .conf:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH x86_64
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/7082b361-a170-49ad-b5b7-d4fb6ca55cba ro i915.modeset=1
Build Date: 08 November 2009 04:08:18PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 10:22:11 2009
(II) Loader magic: 0x7c1a00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa400000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output DVI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DVI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output DVI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.0
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device WebCam SCB-0340N
(**) WebCam SCB-0340N: always reports core events
(**) WebCam SCB-0340N: Device: "/dev/input/event9"
(II) WebCam SCB-0340N: Found keys
(II) WebCam SCB-0340N: Configuring as keyboard
(II) XINPUT: Adding extended input device "WebCam SCB-0340N" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event2"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) WebCam SCB-0340N: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"thank you for putting so much effort into my problem
I now tried this .conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "dri"
Load "record"
Load "glx"
Load "extmod"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "VGA1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "dpms"
EndSection
Section "Monitor"
Identifier "LVDS1"
VendorName "Something"
ModelName "LaptopLCD"
Option "dpms"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
# VendorName "Intel Corporation"
# BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
# BusID "PCI:0:2:0"
Option "Monitor-LVDS" "LVDS1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "LVDS1"
SubSection "Display"
ViewPort 0 0
Depth 24
EndSubSection
EndSection
and this is my new log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH x86_64
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/7082b361-a170-49ad-b5b7-d4fb6ca55cba ro i915.modeset=1
Build Date: 08 November 2009 04:08:18PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 19 06:53:16 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "LVDS1"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c1a00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 using monitor section VGA1
(II) intel(0): Output LVDS1 using monitor section LVDS1
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output DVI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DVI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output DVI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "Monitor-LVDS" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.0
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device WebCam SCB-0340N
(**) WebCam SCB-0340N: always reports core events
(**) WebCam SCB-0340N: Device: "/dev/input/event9"
(II) WebCam SCB-0340N: Found keys
(II) WebCam SCB-0340N: Configuring as keyboard
(II) XINPUT: Adding extended input device "WebCam SCB-0340N" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event2"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) AIGLX: Suspending AIGLX clients for VT switch
edit: I just tested the VGA out with no .conf and it works, even with the correct display ratio (4:3 rather than 16:9 on my book). Tomorrow I will perhaps test the hdmi port on a friends new TV. If all works, I honestly don't care about messing around with xorg.conf ..
The font path problem is only relevant to urxvt so I will stick with xterm where extra fonts work without problem.
Last edited by lustikus (2009-11-19 10:36:06) -
Hi
1.running archlinux for about 2 weeks, no problems, only some small ones solved with the wiki
2.new harddrive - ergo new installation
3.installation of the base system via ftp, the other parts too ( xorg, gnome, ... )
4.start of hwd -x -> cannot find xservers; ok on with xorg -configure
5.manual configuration of xorg.conf -> monitor/nvidia
Finally startx, abort because missing 'nvidia' and 'glx' -> no problem ;-), manual copy in the right path; X starts and aborts because of missing mouse device ( mouse/keyboard driver is installed; mouse at auto ) ...
Btw. my mouse is a Razor Copperhead, no problem so far with xorg 6.8.2.
Read some threads, but to no avail or iam to dump to get it ...
Ok iam frustrated - is this some kind of beta test?
Greetings OliverRead this topic http://bbs.archlinux.org/viewtopic.php?t=19019
It may solve yr gnome problems -
DELL VOSTRO 3750 with Windows 7 64 bit BOSD
Hello:
I have been dealing with BSOD for the last 8 months, but my hardware appears fine. I thought the problem was related to some wrong DELL drivers for my DELL VOSTRO 3750 with Windows 7 64 bit. Tried for a few months to solve the problem with DELL
customer service. My warranty ran out May 31, 2014. I had DELL come and replace the network card and the fan because I was having overheating issues and some of the indications from the bluescreen messages seemed to point at the network card. A
month after warranty ran out, I was still getting BSOD so I tried uninstalling and reinstalling original drivers from DELL. Worked fine for a couple of months. Then the BSODs came back again everyday or 2.
Is there anyone in the Microsoft world that can help?
https://www.dropbox.com/s/0ze9z2yduzdnh5u/MEMORY.DMP?dl=0
Really appreciated,
TimHi,
I checked the link again and it still stay unavailable.
Please recheck and upload the files again.
For resolving Blue Screen Errors in Widnows 7, please first take a look at the following article:
Resolving stop (blue screen) errors in Windows 7
Best regards
Michael Shao
TechNet Community Support -
Xorg configuration over a laptop with iintel video card
Hi to everybody!!!
I'm a newbie in using archlinux. I decided to use it after my curiosity in learning more about this OS!
I've installed archlinux 0.7.2 in base version and then I upgraded everything.
I've installed KDE, but in configuring my xorg.conf file, I'm having lots of problem.
I've got a notebook, an acer travelmate 611TXV with embedded intel video card (82815 CGC). Typing
lshwd | less
, the monitor shows:
VGA compatible controller: Intel Coorp. |82815 CGC [Chipset Graphics Controller] (vesa)
I should consider vesa driver or not?
When I set xorg.conf (generate with
hwd -xa
command, I create e new device to describe my video card, because there wasn't, like this:
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
typing
startx
kde starts, but it uses a too low video resolution. It should use 1280x768, the lcd is 14.1"
I can't set the right one! how to?
what I have to do with that "Modeline...
that are reater my lcd capabilities? can I delete them?
Over win XP the lcd woks fine at 1280x768 with 60Hz.
Is there someone to help me? Please
VincenzoHi!
thanks for your reply!
My xorg.conf is posted as follows. It's very very similar to the original obtained with standard installation steps.
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it, IT"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768@60"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I don't know why if I change the default color depth to 24, my resolution becomes 640x480!
Please help me!
Thanks for all
Vincenzo -
Dell Vostro V13 wireless card issue
Hello. First of all sorry for posting this, because I'm quite sure that it has been asked before. For some weird reason, everytime I use the forum search engine, I get an 500 error.
I'm having troubles to configure my wireless card on my Dell Vostro V13. The wireless card is present on the interfaces list, but I can't put it up.
I installed wicd following wiki steps, but without any luck.
iwconfig wlan0:
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
ifconfig -a:
eth0 Link encap:Ethernet HWaddr 00:26:6C:10:9C:93
inet addr:192.168.77.108 Bcast:192.168.77.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:68428 errors:0 dropped:0 overruns:0 frame:0
TX packets:41438 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:99765655 (95.1 Mb) TX bytes:3044573 (2.9 Mb)
Interrupt:41 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:756 (756.0 b) TX bytes:756 (756.0 b)
wlan0 Link encap:Ethernet HWaddr 70:F1:A1:2D:D8:41
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lspci -vnn | grep 14e4:
09:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I read the wiki entrance for Broadcom Wireless cards, but I'm not sure whether I must use broadcom-wl driver or not.
Any thoughts?
Thank you and sorry for my lousy English :XGusar wrote:
Assuming you're using the kernel b43 driver... did you install the firmware? There's a b43-firmware package in AUR.
If that won't work, then the wl driver is an alternative.
Gusar,
The wiki says "brcm80211
The brcm80211 driver is included in the kernel since 2.6.37. No further action is necessary on the part of the user."
...so I didn't installed anything besides wicd.
Maybe you are looking for
-
How to find out what word doesn't start with a "#"?
Hi, I need to find out the position in the text for the first word that doesn't contain a leading hashtag (#) - starting from the end of the text. This is a demo text: var demoText:String = "hello world #dontremoveme here #1remove #2removeme #3remove
-
CFContent fails with output from CFPDF???
I had a situation where I had to create a PDF containing a dynamic cover sheet and supporting documents, which are in pdf format. I used CFDocument to create the cover sheet, stored it in a variable, then used cfpdf with cfpdfparam to specify that co
-
First Step Towards an entry in SAP HCM
Hi Experts Some days back, I wrote a query about doing a certification in SAP HCM on this platform to which quite supportive people replied. As and when I decided to go for the certification and gathered some info, some experienced people cautioned m
-
My Basic Tab has vanished...clues on where I can find it. I have a horrible feeling I've pressed some 'hide' button by mistake and can't find how to undo it
-
Hi all, An error messages keeps popping up when I open files in photoshop. It says that my scratch disk is full. It even said once that my startup disk is full. I've spent the better part of today troubleshooting, to no avail. From what I understand