Dell Wireless 5540 HSPA on Latitude E7440

I bought and installed Dell Wireless 5540 HSPA modem on Latitude E7440. I can not find suitable driver. These cause Authorization Error:
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=R283078
http://www.dell.com/support/home/nl/nl/nlbsdt1/Drivers/DriversDetails?driverId=VXPJ8&fileId=2935061607
Error message:
I have found driver packages for other devices (unsuitable for me) that (beside setup) include also raw driver files (.inf) that can be used directly from Device Manager. Is there such package for 5540?
Thank you!

Hello,
I don't think there is a raw .inf file for that driver, but you could check our ftp site to see whether one might have been uploaded there. It's possible one is stored there but not released to the public via our Dell Support Pages.
Try: ftp://ftp.us.dell.com/
Good luck.
Todd

Similar Messages

DELL WIRELESS 5560 HSPA + Mobile broadband Mini-Card - Win 8

Good morning everyone.
I have a big problem with ultrabook "YOUR 3460."
I updated the S.O. Windows 8, but the "DELL WIRELESS 5560 HSPA + Mobile Broadband Mini-Card" does not work.
On the website of DELL, I found a type of driver, but installing it in the device manager, does NOT recognize the card. How do I proceed? Can someone help me, please? Tomorrow I need to connect mobile ...
Thank you.

Hi Fabio79,
Please check in BIOS if the WWAN card is detected in BIOS or not. Also, is the wireless driver (network controller) listed in device manager under 'Network Adapters' or 'Other Devices'?
Turn off the computer, restart it and press F2 key as soon as the Dell logo appears.
Navigate to 'Advanced' screen, select 'Miscellaneous Devices' and press Enter.
Check if 'Internal WWAN' is enabled. Navigate to Exit screen and select 'Exit Saving Changes'. Once done, download the drivers from this link: http://dell.to/XEzTO0.
Hope this helps.
Keep me posted with the status.

AP541N v1.7.0(2)& Dell Wireless Utility

Premier Partner set-up new AP541N's and we're having difficulty connecting with WPA2 with our Dell Latitude E4300s using the Dell Wireless Utility. Our Latitude D600/630's successfully connect with WPA2 via WZC.
The E4300 start @ IP127.x.x.x, run 'acquiring network address', then show connected to IP 169.x.x.x. The D600/D630's start @ IP127.x.x.x, run 'acquiring network address', then show connected to IP 192.x.x.x and users successfully connect to the LAN and internet.
Anyone else having issues with AP541N's v1.7.0(2) and Dell wireless utility?

Update. Dell Latitudes successfully connect with security set to 'None'. Set security to 'WPA Personal' with only WPA checked ( WPA2 not checked ) and users were prompted for password, user enters the password and connects. The following day, same security settings with new password and both previous day's users and new users are not prompted for a password and are unable to connect. Set security to 'None' and all users connect.
Suggestions?

Windows 7 not recognizing device - Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card

Windows 7 is not recognizing my Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card (Qualcomm Gobi 2000). I can't even uninstall the driver, it says that I don't have "sufficient permission" to stop device or something to that effect
(though I'm an administrator). I also can't re-install the same or different driver. I might have installed the wrong driver, though this is supposed to be the correct one according to Dell after typing in my service tag. I went to the FTP
to get one specifically for "Verizon Wireless", but I can't uninstall the prior driver.
How can I fix these issues? Thanks.

Hi,
Any update?
Have you tried safe mode mentioned in the first reply? What is the status of the driver in device manager? For "Verizon Wireless", have you installed any verizon software or related verizon device? Uninstall this kind software, then uninstll driver again
as a test.
Contact this support, maybe they can give some different ideas.
Verizon Wireless Support
http://www.verizonwireless.com/support/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Dell Wireless(DW1530, DW1540) issues with VoIP on 802.11n

We are having issues with VoIP, using Microsoft Lync, over wireless. We are experiencing static, jitter, dead air, and dropped words during calls. We have a Cisco wireless infrastructure consisting of a 5508 controller and 2602 access points. We're currently runng OS version 7.5.102.0, but the issues also occurred when running OS version 7.4.100.0.
On the client side, we've narrowed the issues down to Dell Laptops(Latitude E6430, Latitude D640, Latitude E6420) with Dell Wireless/Broadcom(DW1530, DW1540) network adapters that are 802.11n capable.
Latitude E6430
OS - Windows 7
wireless adapter - DW1540
driver - 5.100.82.112
Latitude D640
OS - Windows 7
wireless adapter - DW1530
driver - 5.100.235.12
Latitude E6420
OS - Windows 8
wireless adapter - DW1530
driver - 6.30.58.26
All of the drivers are the latest offered from Dell.
If we disable high throughput (802.11n) on the access points and force the clients to connect with 802.11a or 802.11g, we don't experience any issues.
If we use another manufacturers 802.11n USB NIC in the same hardware, we don't experience any issues.
This seems to be a compatibility issue between Dell Wireless(Broadcom) 802.11n capable network adapters and Cisco access points. I'm guessing this issue is with all 802.11n traffic, but we're only noticing it during Microsoft Lync voice calls.
Has anybody else had this type of problem and found a resolution?

Has anybody else had this type of problem and found a resolution?
I've seen some Intel chips that simply "misbehaves" when operating in 802.11n. Going to the laptop manufacturer's website to download the firmware is next to useless. Going to the NIC manufacturer's website to download the LATEST firmware is more reliable.
There's a significant version "gap" between the firmware published with the laptop manufacturer vs the ones with the wireless NIC.
I suggest you go to Broadcom and load the latest firmware in one or two machines just to test.

Trying to connect to Airport Extreme with Dell Wireless 1370 and Windows XP

Home network using Airport Extreme Base Station with WPA-PSK (TKIP) Security. All works well with MACs in the house (G5, iMac, and Powerbook). Trying to connect a Dell Latitude D610 with built-in Dell Wireless 1370 WLAN mini-PCI Card to the home network.
Initially home network is not seen on Dell Laptop in available networks (as expected as it has not been added to list of available networks and is a "closed" network)although I do see the neighbors network so card is working and sees "open" networks.
Set-up options for the Dell 1370 card include:
Network Name (SSID)
Network Authentication (Includes "open", "shared", "802.1X", "WPA", "WPA-PSK", and "CCKM")
Data Encryption (When WPA-PSK is selected it defaults to Auto)
Network Key
Confirm Key
All other configuration items are greyed out.
I enter my SSID, select WPA-PSK, Data Encryption defaults to auto, tried entering passwrod in Network Key and Confirm Key which does not seem to work. Adds to list of preferred networks but does not indicate availability.
Question is I have a password that I use on MACs for access to WPA-PSK network. On the Dell there is no spot for a password and it does not seem to work in the Network Key or Confirm Key boxes.
Any assistance would be appreciated.
Thanks
mark
Airport Extreme Base Station Windows XP Dell Wireless 1370 WLAN Mini-PCI card

Initially home network is not seen on Dell Laptop in
available networks (as expected as it has not been
added to list of available networks and is a "closed"
network)
Open (broadcast your SSID) your network and see if that makes a difference.
Often (especially in crowded airwaves) a closed network can cause connection issues for some adapters.
iFelix

Latitude E7440 and Outlook 2013 distortion

Is anyone else seeing distortions in Outlook 2013 with the new Latitudes (E7440), as described on this page? We are seeing this quite frequently in our environment, and while the workaround of disabling graphics hardware acceleration seems to work this is not recommended by Microsoft, and I guess will reduce GUI performance. Intel/Dell needs to fix this. Running the latest Intel HD 4000 driver from Dell (Version 10.18.10.3574, A12) on Windows 8.1 x64 Enterprise. We have stopped going to intel.com for newer drivers, those seem to introduce more new issues than they resolve...

I have gone to the intel site to get the drivers. They have posted a fix for this problem but the driver will not install on this dell machine:
The Intel® Driver Update Utilityreports the following message:
A customized computer manufacturer driver is installed on your computer. The Intel® Driver Update Utility is not able to update the driver. Installing a generic Intel driver instead of the customized computer manufacturer driver may cause technical issues. Contact your computer manufacturer for the latest driver for your computer.
Dell are you monitoring the community and will address this?

Dell wireless 1538 802.11 a/g/n adapter

I have a Dell Venue 8 Pro 5830 and I cannot get an internet connection. When I run the Windows network diagnostics I get the message "The Dell wireless 1538 802.11 a/g/n adapter is experiencing driver or hardware related problems".
I have tried everything suggested in the Tablet. What can I do now? I bought the Tablet through Amazon and I live in Venezuela.

I have the same EXACT problem for 3 days.Even with my 5 yr computer experience I still couldn't figure this issue out.Dell rep and I found a temp solution.restart......press f8 nonstop....click on repair......restore it to an earlier time....
this so far is the ONLY thing wev'e tried thats had a temp and pleasing result.let me guess there's a big red x on the bottom right hand corner? also try pressing fn + f2 same time......device manger-right click on dell wireless and disable,then enable.......
ive had my dell inspiron 5423 for 2 1/2 months off of ebay.still has warranty under owner before me.After tons of research I'm thinking either driver I bad,or hardware or when he installed fresh copy of windows 7,he didn't install everything in the correct order (very important thing to do).
If by chance you come across a permanent solution please keep me informed.

X301 and Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)

Ok, I (Lenovo) did it again.
System Update showed me this update: "Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)".
As I'm using Vodafone and I had a AT&T driver, I decided to update.
The result is, that now the GPS doesn't work.
Yes, I'm in a place where the GPS signal is present (my house, with the previous driver I was able to get 6/7 satellites).
What happens? Lenovo TV GPS stays there trying to fix the satellites, but nothing happens. I can't recover the system to a previous state, as I updated Flash player too, and Windows only show me the possibility to roll back this update.
So, apart advicing everyone not to update, I kindky ask:
- where can I found the previous driver? I searched the web without success...
- why does Lenovo deploy driver which can cause problems (I just had one updating the BT driver last week! .msi installer problem, error 1935...)?
Thanks to everyone
600, R52, T61p, X301

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Best practice for home setup/Roaming with built-in Dell wireless card?

I have a client with a huge house; I have done a site survey and it will require 3 APs to blanket the entire thing. I am wonderig what the best way to set this up for him would be? He would like to be able to walk around with the house and not lose connectivity. He is attempting to use his built-in Dell wireless card/client. As far as I know, these do not support Cisco roaming. What I have done is setup 3 diffrent SSIDs for each part of the house. Depending on his location he manually connects to the correct AP. Is this the best setup?
I had attempted to set all APs with the same SSIDs but found that the client would not roam and also found it difficult to connect to any of the APs at all. I believe the card was getting confused since there was overlap of the same SSID.

If he has a huge house, I don't think his laptop would be that old and also, the Dell's use the Intel wifi cards. Having all 3 ap's setup for the same SSID is what you should do and don't know why you are having so many issues. I would assume the ap's are on channel 1, 6, and 11 and how is the power setting? Do all these ap's run back to the same switch?

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

WRT160Nv2 won't connect with Dell Wireless 1515 half-mini card

I just received a new Dell Studio 14z that has a Dell Wireless 1515 half-mini 802.11N card. After messing around with it several times, I am still unable to get it to connect wirelessly to my WRT160Nv2 router. Whenever I try to connect to the network, I get the following error from Windows Vista:
Wireless association failed because WIndows did not receive any response from the wireless router or access point.
I do use MAC Address filtering on the router, but I've added all 3 MAC address the system has (1 for wired, 1 for wireless, 1 for bluetooth). I've also checked the WEP security key MANY times and am sure it is entered correctly. I have also tried updating to the latest firmeware, 2.0.0.3 build 7. Nothing seems to help at all.
I don't know what else to look at to determine the cause of the problem. Does anyone have any suggestions about what the problem might be?
Thank You

Did you reset the router after upgrading the router's firmware...If not then,Press and hold the reset button for 30 seconds.Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
For the wireless computer you need the Mac Address of the wireless Adapter while enabling MAC Address filtering on the router.

Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.....

I am currently receiving the above "pop up" in the bottom tool bar.....I have contacted Microsoft, Dell support....completed three system restores, reinstalled/uninstalled drivers, etc. etc......can ANYONE help with this issue??? When I go to start, Dell wireless, etc.....this does/will NOT come up...
NORMALLY...there are two(2) icons in the bottom right hand tool bar....1=green signal bar code & 2=computer to computer conection.....the first is no longer present....this is really annoying and I wish to get corrected asap! Everything in/on the computer is working ok.....I even have INet connection!!! PLEASE ADVISE.
Dell 1721 Laptop with wireless internal card(?).......Del, after 1 1/2 hours....and no "renewal" of warranty....hung up on me.....imagine that!
Solved!
Go to Solution.

After many, many hours....I finally gave in & called 800 support....
it went through four levels and finally ended at a superior tech. software/hardware
writer/installer person....took 2 minutes and he was done!
Thanks!!!
Now....as of today...#2 laptop will not work!!!!! Here I/we go again....

Connection/compatability with Dell Wireless

We just installed an AirPort Extreme and our non-Dell desktop and laptops are connected but desktops and a laptop that use a Dell wireless device are not recognizing the network. Is there a compatibility issue? Thanks in advance!

Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
You said you reset the router to factory defaults and that it was working better. Did the download connection speed through the router go to 8-9Mbits/sec ? If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right. If you still have this slow speed problem, then please post the following info:
1) Your ISP (internet service provider)
2) Your modem model number and version.
3) Open your router's setup pages, and go to the Setup tab. List all your settings in the "Basic Setup - Internet Setup" section.
4) List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment.

Dell wireless 1450 wireless usb adapter

Hello, I recently bought the airport extreme and can get connected fine with my macbook, but when I try to connect the Dell PC using the Dell wireless 1450 usb adapter I can´t find the network, eventhough it finds other networks. I have tried with not having password protection and still nothing. would be great if anyone had a solution to this problem, thx in advance Kolmodin!

further info: wireless windows configuration is on, advanced settings set to any avialable network and nonpreffered net on auto, powersaves off, ap's us a ssid but are not encrypted no wep, ap's have to be added to the wireless networks via the properties of the network connection and when the signal is dropping it loses the wireless networks tab in this menu as well.

Dell Wireless 5540 HSPA on Latitude E7440

Similar Messages

Maybe you are looking for