Dell XPS 600 XFi Soundcard (D) veri
I have the Dell XPS 600 with the XFi Extreme Music D. Am not getting DTs option. I bourght XFi ExtremeMusic to install in my other computer
How can I install the full verison in XPS 600. Do I have two un-install the (D) Verison first
Thanks
Johnny
Johnny77 wrote:
So even if I install the Xfi the one I purshard Bestbuy I still won"t get DTS
Johnny
Sure you will. I guess you'll have to uninstall the Dell card first.
Similar Messages
-
Itunes crashing w/ Dell XPS 600
I just purchased a Dell XPS600, and so far i have been unable to get iTunes to work with this computer.
I've installed it, and everything seems fine...
...until i went to start the program, and immediatly after pressing the Desktop icon it says "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I am using Windows XP Media Center Edition, and Mcafee antivirus software. ANY CLUE WHAT IS GOING ON??? ARGHTry installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
Turn off McAfee during the install.
Then try to start iTunes. The error you're getting is usually from a broken QuickTime, which iTunes depends on. -
DELL XPS 6000 with Audigy2ZS..No so
<font face="Baskerville Old Face" size="5">?I have a Dell XPS 6000 Dimension desktop. Win XP. The sound card is a (Soundblaster 2ZS.) The integrated audio onboard is?(RealtekAC 97 Audio.)?I heard the Windows Startup theme,but when I play a song in Windows Media Player it tells me I have a sound problem,and I can still see the music visuals?playing,but hear nothing. When I turn/off?my center speakers, I hear the sound go on, but unable to play any music. I uninstalled the?Soundblaster media Cneter beacuse I did get some sounds that had terrible echo and I couldn't turn it off,so I uninstalled it..didn't think I needed it to play audio with other programs I have. I went to Bios to see if the integrated Audio was on,and it was. ((I've had computers in the past where I had to go to Bios,disable the onboard Audio,so I could hear the Soundblaster.))?In Bios, I?disabled the integrated Audio>rebooted> then no Windows startup music. I've checked all connections and any onboard programs that could be muted or turned down, but?now?there is no sound. I went back to BIOS and re-enabled the Realtek 97 onboard Audio. I went to ADD/REMOVE programs and clicked on the Audigy Soundblaster, I did a repair and it loaded up to 99%,then asked me to put in Disk for the ini.setup files? Did they mean the DELL XPS 600 resource CD with the drivers/utilities/diagnostics? or the Dell Operating System CD? Is this a dangerous thing to do that could impact this computer? I would hate to mess anything up because it's out of warranty. Could there be a conflict with the onboard Realtek 97 and the Soundblaster soundcard, or should they work together? Thank you to all who reply.
Any ideas, anyone?
-
Headphone output stopped working (snd-hda, Dell XPS 13)
Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
The closest I've been able to get at the problem is this:
[~]% alsactl monitor
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
Any hints would be greatly appreciated!
More info:
[~]% cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel enable=0,1
options snd-hda-intel model=dell-headset-multi,dell-headset-multi
This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
$ cat /sys/module/snd_hda_intel/parameters/model
dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
To verify these options are actually being used
$ id -Gn
martin wheel video audio vboxusers nfs
I'm in the audio group, not sure if this is required, but can't hurt.
[~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
Some misc. info:
$ grep Codec /proc/asound/card*/codec*
Codec: Realtek ALC3661
[~]% lsmod | grep ^snd
snd_usb_audio 135316 0
snd_usbmidi_lib 27484 1 snd_usb_audio
snd_rawmidi 26806 1 snd_usbmidi_lib
snd_seq_device 13132 1 snd_rawmidi
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
snd_hda_intel 26327 3
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
$ lspci -vv
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
[ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
[ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 1973782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12386 pages used for memmap
[ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31981568 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.295 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20140424
[ 0.020000] ACPI: All ACPI Tables successfully acquired
[ 0.020260] Security Framework initialized
[ 0.020267] Yama: becoming mindful.
[ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024116] Initializing cgroup subsys memory
[ 0.024140] Initializing cgroup subsys devices
[ 0.024147] Initializing cgroup subsys freezer
[ 0.024150] Initializing cgroup subsys net_cls
[ 0.024155] Initializing cgroup subsys blkio
[ 0.024183] CPU: Physical Processor ID: 0
[ 0.024184] CPU: Processor Core ID: 0
[ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025376] mce: CPU supports 7 MCE banks
[ 0.025391] CPU0: Thermal monitoring enabled (TM1)
[ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.026475] ftrace: allocating 20445 entries in 80 pages
[ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.071098] TSC deadline timer enabled
[ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071149] ... version: 3
[ 0.071150] ... bit width: 48
[ 0.071151] ... generic registers: 4
[ 0.071152] ... value mask: 0000ffffffffffff
[ 0.071154] ... max period: 0000ffffffffffff
[ 0.071155] ... fixed-purpose events: 3
[ 0.071156] ... event mask: 000000070000000f
[ 0.097907] x86: Booting SMP configuration:
[ 0.097909] .... node #0, CPUs: #1
[ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.119293] #2 #3
[ 0.154938] x86: Booted up 1 node, 4 CPUs
[ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
[ 0.160676] devtmpfs: initialized
[ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[ 0.164642] pinctrl core: initialized pinctrl subsystem
[ 0.164688] RTC time: 22:42:27, date: 10/21/14
[ 0.164750] NET: Registered protocol family 16
[ 0.164884] cpuidle: using governor ladder
[ 0.164887] cpuidle: using governor menu
[ 0.164916] ACPI: bus type PCI registered
[ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165118] PCI: Using configuration type 1 for base access
[ 0.165125] dmi type 0xB1 record - unknown flag
[ 0.177572] ACPI: Added _OSI(Module Device)
[ 0.177575] ACPI: Added _OSI(Processor Device)
[ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207326] ACPI: Dynamic OEM Table Load:
[ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.220827] ACPI: Dynamic OEM Table Load:
[ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.237345] ACPI: Dynamic OEM Table Load:
[ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.255255] ACPI: Interpreter enabled
[ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.255298] ACPI: (supports S0 S3 S4 S5)
[ 0.255300] ACPI: Using IOAPIC for interrupt routing
[ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.268573] \_SB_.PCI0:_OSC invalid UUID
[ 0.268575] _OSC request data:1 1f 0
[ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.269580] PCI host bridge to bus 0000:00
[ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
[ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
[ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
[ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
[ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
[ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
[ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.295559] vgaarb: loaded
[ 0.295560] vgaarb: bridge control possible 0000:00:02.0
[ 0.295603] PCI: Using ACPI for IRQ routing
[ 0.297024] PCI: pci_cache_line_size set to 64 bytes
[ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
[ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.297209] NetLabel: Initializing
[ 0.297211] NetLabel: domain hash size = 128
[ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.297225] NetLabel: unlabeled traffic allowed by default
[ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299294] Switched to clocksource hpet
[ 0.305097] pnp: PnP ACPI init
[ 0.305113] ACPI: bus type PNP registered
[ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.305256] system 00:00: [io 0xffff] has been reserved
[ 0.305259] system 00:00: [io 0xffff] has been reserved
[ 0.305262] system 00:00: [io 0xffff] has been reserved
[ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
[ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.306696] pnp: PnP ACPI: found 7 devices
[ 0.306698] ACPI: bus type PNP unregistered
[ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.313661] NET: Registered protocol family 2
[ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.314216] TCP: reno registered
[ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314329] NET: Registered protocol family 1
[ 0.314345] pci 0000:00:02.0: Boot video device
[ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314702] PCI: CLS 64 bytes, default 64
[ 0.314746] Unpacking initramfs...
[ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
[ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
[ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.390043] Scanning for low memory corruption every 60 seconds
[ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.392315] zbud: loaded
[ 0.392526] VFS: Disk quotas dquot_6.5.2
[ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392709] msgmni has been set to 15022
[ 0.392776] Key type big_key registered
[ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.393009] io scheduler noop registered
[ 0.393014] io scheduler deadline registered
[ 0.393072] io scheduler cfq registered (default)
[ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393482] intel_idle: MWAIT substates: 0x11142120
[ 0.393484] intel_idle: v0.4 model 0x45
[ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.393772] GHES: HEST is not enabled!
[ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394367] Linux agpgart interface v0.103
[ 0.394421] rtc_cmos 00:01: RTC can wake from S4
[ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.394611] Intel P-state driver initializing.
[ 0.394625] Intel pstate controlling: cpu 0
[ 0.394647] Intel pstate controlling: cpu 1
[ 0.394663] Intel pstate controlling: cpu 2
[ 0.394684] Intel pstate controlling: cpu 3
[ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.395139] TCP: cubic registered
[ 0.395367] NET: Registered protocol family 10
[ 0.395811] NET: Registered protocol family 17
[ 0.396487] registered taskstats version 1
[ 0.397305] Magic number: 2:622:755
[ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
[ 0.397659] PM: Hibernation image not present or could not be loaded.
[ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.399554] Write protecting the kernel read-only data: 8192k
[ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
[ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 0.412549] systemd-udevd[57]: starting version 216
[ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.430313] sdhci: Secure Digital Host Controller Interface driver
[ 0.430315] sdhci: Copyright(c) Pierre Ossman
[ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.441502] ACPI: bus type USB registered
[ 0.441544] usbcore: registered new interface driver usbfs
[ 0.441562] usbcore: registered new interface driver hub
[ 0.441712] usbcore: registered new device driver usb
[ 0.442370] SCSI subsystem initialized
[ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.442897] ehci-pci: EHCI PCI platform driver
[ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
[ 0.444256] libata version 3.00 loaded.
[ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
[ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.456468] hub 1-0:1.0: USB hub found
[ 0.456636] hub 1-0:1.0: 2 ports detected
[ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.457437] hub 2-0:1.0: USB hub found
[ 0.457454] hub 2-0:1.0: 9 ports detected
[ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460861] hub 3-0:1.0: USB hub found
[ 0.460871] hub 3-0:1.0: 4 ports detected
[ 0.461773] ahci 0000:00:1f.2: version 3.0
[ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
[ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.473307] scsi0 : ahci
[ 0.473445] scsi1 : ahci
[ 0.473555] scsi2 : ahci
[ 0.473668] scsi3 : ahci
[ 0.473715] ata1: DUMMY
[ 0.473717] ata2: DUMMY
[ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
[ 0.473721] ata4: DUMMY
[ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
[ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.794069] ata3.00: configured for UDMA/133
[ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
[ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
[ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.799393] sda: sda3 sda4
[ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 0.887143] hub 1-1:1.0: USB hub found
[ 0.887202] hub 1-1:1.0: 8 ports detected
[ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
[ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
[ 0.981520] FS-Cache: Loaded
[ 0.992070] RPC: Registered named UNIX socket transport module.
[ 0.992075] RPC: Registered udp transport module.
[ 0.992077] RPC: Registered tcp transport module.
[ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
[ 1.007058] Netfilter messages via NETLINK v0.30.
[ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
[ 1.023856] vboxdrv: Found 4 processor cores.
[ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
[ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.322293] systemd-udevd[170]: starting version 216
[ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
[ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
[ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
[ 1.576090] [drm] Initialized drm 1.1.0 20060810
[ 1.580291] random: nonblocking pool is initialized
[ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
[ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
[ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.622639] sound hdaudioC0D0: inputs:
[ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
[ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
[ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
[ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
[ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.628924] ACPI: Power Button [PWRB]
[ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 1.630785] ACPI: Lid Switch [LID0]
[ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.631327] ACPI: Power Button [PWRF]
[ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
[ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
[ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
[ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
[ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
[ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
[ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.641000] wmi: Mapper loaded
[ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.644274] AVX2 version of gcm_enc/dec engaged.
[ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.707814] iTCO_vendor_support: vendor-support=0
[ 1.709016] [drm] Memory usable by graphics device = 2048M
[ 1.709022] [drm] Replacing VGA console driver
[ 1.710234] Console: switching to colour dummy device 80x25
[ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
[ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
[ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
[ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
[ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
[ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
[ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.730563] [drm] Driver supports precise vblank timestamp query.
[ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
[ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
[ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
[ 1.756260] [drm] VBT doesn't support DRRS
[ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
[ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
[ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
[ 1.775456] fbcon: inteldrmfb (fb0) is primary device
[ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 1.808667] mousedev: PS/2 mouse device common for all mice
[ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2.394398] Switched to clocksource tsc
[ 2.838140] Console: switching to colour frame buffer device 240x67
[ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845936] i915 0000:00:02.0: registered panic notifier
[ 2.876371] media: Linux media interface: v0.10
[ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.879690] usbcore: registered new interface driver usbhid
[ 2.879694] usbhid: USB HID core driver
[ 2.883145] Linux video capture interface: v2.00
[ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
[ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
[ 2.895830] Bluetooth: Core ver 2.19
[ 2.895849] NET: Registered protocol family 31
[ 2.895852] Bluetooth: HCI device and connection manager initialized
[ 2.895861] Bluetooth: HCI socket layer initialized
[ 2.895864] Bluetooth: L2CAP socket layer initialized
[ 2.895877] Bluetooth: SCO socket layer initialized
[ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
[ 2.901827] usbcore: registered new interface driver uvcvideo
[ 2.901830] USB Video Class driver (1.1.1)
[ 2.910511] usbcore: registered new interface driver btusb
[ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
[ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
[ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 36.061335] wlan0: authenticated
[ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 36.070080] wlan0: associated
[ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
[ 4501.338278] PM: Syncing filesystems ...
[ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.348617] done.
[ 4501.348622] PM: Preparing system for mem sleep
[ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4501.351580] PM: Entering mem sleep
[ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
[ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.361609] cfg80211: Calling CRDA for country: DE
[ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
[ 4501.992409] PM: suspend of devices complete after 640.028 msecs
[ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
[ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
[ 4502.019816] ACPI: Preparing to enter system sleep state S3
[ 4502.020586] PM: Saving platform NVS memory
[ 4502.021109] Disabling non-boot CPUs ...
[ 4502.021139] intel_pstate CPU 1 exiting
[ 4502.022404] kvm: disabling virtualization on CPU1
[ 4502.022854] smpboot: CPU 1 is now offline
[ 4502.023143] intel_pstate CPU 2 exiting
[ 4502.024386] kvm: disabling virtualization on CPU2
[ 4502.125774] smpboot: CPU 2 is now offline
[ 4502.126039] intel_pstate CPU 3 exiting
[ 4502.127395] kvm: disabling virtualization on CPU3
[ 4502.229207] smpboot: CPU 3 is now offline
[ 4502.232189] ACPI: Low-level resume complete
[ 4502.232259] PM: Restoring platform NVS memory
[ 4502.232774] Enabling non-boot CPUs ...
[ 4502.232814] x86: Booting SMP configuration:
[ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4502.245238] kvm: enabling virtualization on CPU1
[ 4502.247462] Intel pstate controlling: cpu 1
[ 4502.247514] CPU1 is up
[ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4502.259870] kvm: enabling virtualization on CPU2
[ 4502.262107] Intel pstate controlling: cpu 2
[ 4502.262155] CPU2 is up
[ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4502.274504] kvm: enabling virtualization on CPU3
[ 4502.276760] Intel pstate controlling: cpu 3
[ 4502.276807] CPU3 is up
[ 4502.282141] ACPI: Waking up from system sleep state S3
[ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
[ 4502.303102] PM: early resume of devices complete after 0.384 msecs
[ 4502.303194] usb usb2: root hub lost power or was reset
[ 4502.303197] usb usb3: root hub lost power or was reset
[ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 4502.329054] sd 2:0:0:0: [sda] Starting disk
[ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4502.652119] ata3.00: configured for UDMA/133
[ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
[ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
[ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
[ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
[ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
[ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
[ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
[ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
[ 4503.274732] PM: resume of devices complete after 970.836 msecs
[ 4503.275664] PM: Finishing wakeup.
[ 4503.275668] Restarting tasks ...
[ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276362] usb 2-5: USB disconnect, device number 3
[ 4503.276546] pci_bus 0000:01: Allocating resources
[ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 4503.276596] done.
[ 4503.276614] pci_bus 0000:02: Allocating resources
[ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.276778] pci 0000:00:00.0: using default PCI settings
[ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.276795] i915 0000:00:02.0: using default PCI settings
[ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
[ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
[ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.276980] pci 0000:00:1f.3: using default PCI settings
[ 4503.277590] pci_bus 0000:01: Allocating resources
[ 4503.277619] pci_bus 0000:02: Allocating resources
[ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.277673] pci 0000:00:00.0: using default PCI settings
[ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.277690] i915 0000:00:02.0: using default PCI settings
[ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
[ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
[ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.277875] pci 0000:00:1f.3: using default PCI settings
[ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
[ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
[ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4506.058296] dell_wmi: Unknown key e00e pressed
[ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
[ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 4507.053766] wlan0: authenticated
[ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 4507.065241] wlan0: associated
[ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
[ 4813.124097] hub 2-2:1.0: USB hub found
[ 4813.124371] hub 2-2:1.0: 4 ports detected
[ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
[ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
[ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
[ 4813.515300] usbcore: registered new interface driver snd-usb-audio
[ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
[ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
[ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
[ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
[ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
[ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
[ 4814.121931] usbcore: registered new interface driver ax88179_178a
[ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
[ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6509.605763] usb 2-2: USB disconnect, device number 6
[ 6509.605773] usb 2-2.2: USB disconnect, device number 7
[ 6509.660447] usb 2-2.3: USB disconnect, device number 8
[ 6509.692281] usb 2-2.4: USB disconnect, device number 9
[ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
[ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
[ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6511.071805] PM: Syncing filesystems ...
[ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.087129] done.
[ 6511.087139] PM: Preparing system for mem sleep
[ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6511.090294] PM: Entering mem sleep
[ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
[ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
[ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
[ 6511.720807] PM: suspend of devices complete after 629.628 msecs
[ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
[ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
[ 6511.748271] ACPI: Preparing to enter system sleep state S3
[ 6511.749033] PM: Saving platform NVS memory
[ 6511.749584] Disabling non-boot CPUs ...
[ 6511.749628] intel_pstate CPU 1 exiting
[ 6511.751130] kvm: disabling virtualization on CPU1
[ 6511.752157] smpboot: CPU 1 is now offline
[ 6511.752650] intel_pstate CPU 2 exiting
[ 6511.754091] kvm: disabling virtualization on CPU2
[ 6511.754112] smpboot: CPU 2 is now offline
[ 6511.755147] intel_pstate CPU 3 exiting
[ 6511.756491] kvm: disabling virtualization on CPU3
[ 6511.857520] smpboot: CPU 3 is now offline
[ 6511.860099] ACPI: Low-level resume complete
[ 6511.860168] PM: Restoring platform NVS memory
[ 6511.860682] Enabling non-boot CPUs ...
[ 6511.860725] x86: Booting SMP configuration:
[ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6511.873161] kvm: enabling virtualization on CPU1
[ 6511.875384] Intel pstate controlling: cpu 1
[ 6511.875441] CPU1 is up
[ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6511.887813] kvm: enabling virtualization on CPU2
[ 6511.890055] Intel pstate controlling: cpu 2
[ 6511.890104] CPU2 is up
[ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6511.902450] kvm: enabling virtualization on CPU3
[ 6511.904715] Intel pstate controlling: cpu 3
[ 6511.904763] CPU3 is up
[ 6511.910077] ACPI: Waking up from system sleep state S3
[ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
[ 6511.931215] PM: early resume of devices complete after 0.474 msecs
[ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 6511.931308] usb usb2: root hub lost power or was reset
[ 6511.931310] usb usb3: root hub lost power or was reset
[ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 6512.030458] sd 2:0:0:0: [sda] Starting disk
[ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6512.353607] ata3.0Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...) -
MSI R7 260X 2GD5 OCV1 comparability with Dell XPS 435MT
I have a Dell XPS 435MT with an i7920 processor. I have upgraded the system to a 600 Watt power supply. Will the R7 260X work in this system? The motherboard has a PCI 16e slot, but is only PCI 2.0. The R7 is PCI Express 3.0. Will there be any comparability problems? Thanks!
We can't tell you. PCI- E should be fine. While AMD cards' downwards compatibility is not as good as nvidia cards' it should still work, theoretically. Only Dell can confirm if their machine is compatible with current generation vgas. Besides PCI-E an old bios not supporting current vgas can still spoil any chance of running the card.
-
Should I pick the Macbook Air/Pro or the Dell XPS 13?
Hello everyone!
I'm a 10th grade student in a international school, where we are allowed to use laptops instead of our regular notebooks. In my class no one uses a notebook, so I would be the first one.
My idea came from the fact that I broke my arm, and am unable to write normally for the next 3 months, as my hand is in a cast. I am currently writing on my iPad, which is nice, as I can only use my left hand for typing. I didn't really think much of it, but after few days I realised how easy it is to type on a tablet instead of on a piece of paper.
I took my exams on a PC and I was easily able to write with my left hand only. The experience was much better, as I was able to erase all my mistakes/ rewrite someting I didn't like… but let's get to the point.
After I finish my iGCSE's, I'll be going to the IB diploma programme. It is very rigorous and requires a lot of work, so a laptop would be very helpful. The three laptops I want to choose between are:
1. 13" Macbook Air
2. 13" Macbook Pro
3. New Dell XPS 2015 13" (http://www.dell.com/us/p/xps-13-9333/pd?oc=fncwp1512h)
Now I know about the rumors of the new Macbook Air 12" with retina display, but the idea of having one port only doesn't appeal to me. I currently have an iMac 27" late 2013, along with an iPad and an iPhone. It is better to stick to apple just for the whole sync. between all devices, or is the Dell better in terms of performance? The ultrabook would be used for typing essays, editing videos (I'm doing film at school, so we get assignments like that pretty often) and of course web browsing. Gaming isn't really a priority, but to play some easy-going games such as garry's mod or turbo dismount on the go would be nice.
So what do you guys this is the best pick? I want the laptop to last another three years before I go to uni, and that's the reason I want to go for either the mid-spec. MacBook Pro/Air or the fully spec. Dell XPS 13. Price plays a role here, as I can only pay max. 1500$ for it, so I cannot afford the fully spec. MacBook Pro 13".
Ps. I really like the touchscreen in the Dell XPS 13, but does it affect the battery life much? It's really important that it lasts at least 8 hours a day, as I start school really early in the morning, and finish late in the afternoon.
Thank you for your answer,
mac117Mac117 wrote:
Ps. I really like the touchscreen in the Dell XPS 13,
Then go for it.
Best. -
TouchPad lock key does not work anymore on Dell XPS L401X
Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
TinhTry mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more. -
i bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! and the oiption it gives me is to rebuy an SD version.......BS!!! my laptop plays HD! its a Dell XPS 1330 with HDMI.....how can i get this HD Ted movie to play on my laptop, as my mini pad has no HDMI cable to plug into my TV.
Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
From what I can tell in the current marketplace, these two tablets are at the top of the heap and the only true competition for each other.
The Yoga 2 Pro and Dell XPS 11 each exceed the other in numerous metrics.
Here is a quick comparison:
1) Price - Yoga 2 Pro gives you an i5 with 128 gb SSD for $999. The XPS gives you only an i3 with an 80 gb SSD for that price.
2) Ports - XPS 11 wins this one with 2 USB 3.0 ports vs the Y2P 1 USB 3.2 andd 1 USB 2.0.
3) Screen - Y2P offers more real estate and higher PPI by 20 points than XPS 11.
4) Portability - XPS 11 is thinner, has a smaller footprint and is 1/2 pound lighter.
5) Keyboard - Y2P offers an excellent real keyboard. XPS offers a weird kind of flat, non-depressable surface that offers haptic feedback but apparently is hard to type fast on, especially if you have fingernails.
6) Active Digitizer - Easy win for XPS 11 here. Big fumble by Y2P.
7) Best for Business - Depends. Bigger better screen and better keyboard vs thinner, lighter, smaller footprint and a pen. Some Legacy programs such as Access with forms designed for desktops may be a bit small on the XPS.
8) Best Desktop Replacement - Have to give this to the Y2P based upon the larger screen.
9) Wifi - This one goes to the XPS11 as it offers dual channel AC.
So it's a tough call. What do you guys think? IMHO if the Y2P had included an active digiitizer this would have been a no-contest win for the Y2P.To do a proper comparison, items that are purely personal preference pieces (size of display, keyboard style etc) should be left out. When this is done, it really is a no brainer. The XPS 11 is hands down the superior machine. This is not to say that one machine will be more compatible or a better match for a particular person based on those personal preference items or perceptions of them. Everyone has a different liking as to what is an ideal display size or keyboard style for them. That is also why many people use a docking station setup so they can use full size keyboards and large 27" screens while working in the office for 8 plus hours. Price difference between the 2 machines is not siginificant and not a consideration if the superior XPS 11 machine has additional value that justifies it to the owner That said, there are other significant core advantages associated with the XPS 11 not mentioned. The XPS 11 uses state of the art NBT Corning Gorilla glass. If you read up on what that means you will see why that is hugh and also why there is additional cost to manufacture with it. The Y2P uses the "U" series processor and not the lower voltage "Y" series used by the XPS 11. The "Y" series is better suited to small form factor ultrabooks and power efficiency. The XPS 11 has a higher display NITS rating of 400. This is at the top of its class and is extremely important for those that may use them in an outdoor mobile activity. The XPS 11 is constructed of carbon fiber and not of the cheaper and much weaker external plastic construction of the Y2P. At 11.6" and 2.5 pounds, the XPS 11 is closer to a comfortable large tablet usage size than a 13" and half pound heavier Y2P. Given the wireless AC standard, it is becoming poor corporate judgement to release a new ultrabook that does not support it. For Lenovo to release an ultrabook that does not support dual band wireless when dual band access points have been in homes for years is completely unacceptable. Same goes with no pen support when the machine is a convertible hybrid. The XPS 11 material comprising the flat keyboard suface grips better when face down than hard plastic buttons. The closer you look at the engineering, design considerations, materials used, the more it becomes clear as to which platform is better built and thought through. Dell has had the luxury of analyzing Lenovo's Yoga build history and has done an incredible job addressing the serious short comings in the Yoga series. That is a significant achievement since the Yoga is still a very good overall machine.
-
Dell XPS Touchpad Driver No Longer Working in Build 10041. Was fine with Build 9926
First of this is an old Dell, but from Vista through to Windows 8.1 Update, and then the initial Windows 10 Tech Preview Builds the Mouse Drivers have been OK. Its not so much the core mouse driver, but the feature extensions in the Accompanying driver bundle
that have stopped working. i.e. the ability to control finger scrolling and tapping, etc.
The Dell supplied drivers for my laptop (XPS M1330) ended with Windows 7 32bit, However, newer Dell laptop models had compatible, fully functioning drivers that could be installed. That was until build 10041.
So my questions are:
1. Anyone found a compatible driver for a Dell XPS with the Alps/Synaptics Touchpad model?
2. If MS Staffers read this, I understand that the model for Windows 10 is... "if it worked in an earlier Windows it will work in Windows 10", so, is this likely to be fixed?
Other than this issue, which is very irritating because working with a very limited mouse is a pain when the mouse supports other touch features, my Windows 10 experience has been really good.
Cheers,
PeteHi Alex,
I found a semi-compatible driver for the Synaptics Touchpad, which is found searching for Dell KB R293038.exe
This driver provides basic two finger touchpad scroll support and chiral scroll. It doesn't support advance Windows 8/8.1/10 swipe features.
Importantly this driver does not support two finger/chiral scroll gestures in Windows Modern Apps like the Store, or Project Spartan, or any other Windows Modern Apps.
Hopefully the Windows 10 Tech Preview Team will be able to work out what they changed that broke the Synaptics Touchpad gestures for so many people posting about the issue on these forums.
Cheers,
Pete -
Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7
Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7
Used to work fine until we updated MS licence. Seems to be a problem with graphics driver, yet I've tried all the posted fixes with no luck.Hi,
Due to Windows Movie Maker is an additional application, you can reinstall it for repair.
Alex Zhao
TechNet Community Support -
Windows Vista Ultimate on Dell XPS Notebook: Why do I need Boot Camp?
I use Windows Vista Ultimate on my Dell XPS Notebook, and application software includes iTunes and Apple Store. Is this why I received a message to download "Boot Camp"? Why do I need Boot Camp?
Sounds really messed up to me. Bonjour? maybe.
Apple AppStore? I think everyone has the right to their own appstore but I thought only an Apple deivce (mac, iphone, ipad, etc)
Apple doesn't support or license use of Mac OS on other hardware, which they call "hackintoshes."
Check the iTunes for Windows forums and support pages.
iTunes for Windows
Apple Support iTunes
Apple Support Site Map
App Store Boot Camp hanging -
Dell XPS Laptop Touch Screen Inputs Interpreted as Panning Photoshop CS6
I have been working with Adobe Illustrator for a little while now and decided that I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version? I am interested in buying Photoshop so I can use it whenever I’d like for longer than the 30 day trial allows, but I certainly don’t want to buy it if I cannot use my stylus on the touch screen to draw. Any help is much appreciated!
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool. http://www.youtube.com/watch?v=Zd1NOBway4o
Uhhh yah. Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 8086 MB
Free memory: 4677 MB
Memory available to Photoshop: 7156 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2455
Driver Date: 20110719000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.8577
Driver Date: 20111103000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Ryan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 911.9G, 762.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Entropy 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Maximum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mean 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Median 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
Minimum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Range 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Skewness 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Sumi-e 13.0
Summation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEI have this exact same problem, though I have a touchscreen monitor for my PC rather than a laptop. This is a bit awkward, but until I find a real solution, this works just fine: when you want to use the touch screen for CS6, hold down the mouse button. You may have to use the mouse to tap the tools you want, but at least there's a temporary solution.
-
Linux 3.12 and streaming media on a Dell XPS 13: kernel panic
Hi all,
Shortly after upgrading from Linux 3.11.6 to 3.12, I started getting kernel panics while playing streaming media (in particular from Youtube and The Daily Show). Here is a camera shot. The crash would not take place immediatly, but perhaps after 15 minutes of streaming. After downgrading to Linux 3.11.6 everything works fine. Therefore, it is clear to me that the issue is related to the Linux 3.12 kernel, but this is all I know.
The fifth-to-last line from the camera shot reads:
[11438.332699] RIP [<ffffffff8129e160>] __sg_page_iter_start+0x20/0x20
A quick Google search reveals that __sg_page_iter_start is a function inside the scatterlist.h library in the Linux kernel, which apparently deals with memory paging, but my knowledge about this stuff is so poor that the message is almost meaningless. I would greatly appreciate if someone could give me a hint about this.
I did not find anything useful in the journal, but here are the last few journal lines for 2 different crash instances:
Crash #1
Nov 15 00:22:45 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:15 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:22 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:24 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:26 xps gnome-session[385]: Starting FCEUX 2.2.2...
Nov 15 00:24:26 xps gnome-session[385]: Loading /home/vrg/MyFiles/roms/nes/CASTLEVA.NES...
Nov 15 00:24:26 xps gnome-session[385]: PRG ROM: 8 x 16KiB
Nov 15 00:24:26 xps gnome-session[385]: CHR ROM: 0 x 8KiB
Nov 15 00:24:26 xps gnome-session[385]: ROM CRC32: 0xb668c7fc
Nov 15 00:24:26 xps gnome-session[385]: ROM MD5: 0x728e05f245ab8b7fe61083f6919dc485
Nov 15 00:24:26 xps gnome-session[385]: Mapper #: 2
Nov 15 00:24:26 xps gnome-session[385]: Mapper name: UNROM
Nov 15 00:24:26 xps gnome-session[385]: Mirroring: Vertical
Nov 15 00:24:26 xps gnome-session[385]: Battery-backed: No
Nov 15 00:24:26 xps gnome-session[385]: Trained: No
Nov 15 00:24:26 xps gnome-session[385]: Power on
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 256 x 224 x 32 bpp
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 1920 x 1080 x 32 bpp full screen
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 126.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 158.7%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 200.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 252.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 200.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 158.7%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 126.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 100.0%
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 256 x 224 x 32 bpp
Nov 15 00:24:27 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:26:02 xps kernel: perf samples too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
Nov 15 00:27:43 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:28:44 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Nov 15 00:31:25 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:31:31 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:31:32 xps gnome-session[385]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Crash #2
Nov 17 14:35:41 xps dbus-daemon[279]: dbus[279]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Nov 17 14:35:41 xps dbus[279]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Nov 17 14:35:41 xps dbus[279]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Nov 17 14:35:41 xps dbus-daemon[279]: dbus[279]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Nov 17 16:15:31 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:39 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:50 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:50 xps gnome-session[351]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Nov 17 16:16:03 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:24:09 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:29:40 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:37:00 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:41:42 xps gnome-session[351]: NOTE: child process received `Goodbye', closing down
In the first journal log, the following line calls my attention:
Nov 15 00:26:02 xps kernel: perf samples too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
However, this seems to be a normal occurrence after playing games (https://bbs.archlinux.org/viewtopic.php?id=170471), so I would guess this is not related to the kernel panic.
For reference, here are some hardware specifications of my Dell XPS 13:
# lsmod
Module Size Used by
usb_storage 47847 1
fuse 74829 3
uvcvideo 72804 0
videobuf2_vmalloc 3272 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 27797 1 uvcvideo
videodev 110188 2 uvcvideo,videobuf2_core
media 11591 2 uvcvideo,videodev
hid_generic 1153 0
usbhid 41434 0
hid 89751 2 hid_generic,usbhid
joydev 9663 0
dell_wmi 1485 0
sparse_keymap 3114 1 dell_wmi
ax88179_178a 12500 0
usbnet 26083 1 ax88179_178a
mii 4027 2 usbnet,ax88179_178a
x86_pkg_temp_thermal 6959 0
intel_powerclamp 8642 0
coretemp 6326 0
kvm_intel 129457 0
kvm 379351 1 kvm_intel
crc32_pclmul 2987 0
crc32c_intel 14249 0
ghash_clmulni_intel 4469 0
cryptd 8473 1 ghash_clmulni_intel
nls_cp437 5953 2
iTCO_wdt 5407 0
vfat 10055 2
fat 51827 1 vfat
iTCO_vendor_support 1929 1 iTCO_wdt
dell_laptop 8851 0
dcdbas 6455 1 dell_laptop
arc4 2000 2
iwldvm 172354 0
mac80211 454008 1 iwldvm
microcode 15024 0
psmouse 85356 0
snd_hda_codec_hdmi 30233 1
evdev 10693 15
serio_raw 5041 0
pcspkr 2027 0
i2c_i801 11269 0
iwlwifi 137049 1 iwldvm
snd_hda_codec_realtek 37276 1
cfg80211 403337 3 iwlwifi,mac80211,iwldvm
i915 611138 3
wmi 8347 1 dell_wmi
rfkill 15698 3 cfg80211
thermal 8620 0
snd_hda_intel 36520 3
intel_agp 10872 1 i915
snd_hda_codec 148129 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
intel_gtt 12664 2 i915,intel_agp
drm_kms_helper 35854 1 i915
snd_hwdep 6332 1 snd_hda_codec
tpm_tis 10921 0
tpm 15091 1 tpm_tis
snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
tpm_bios 9745 1 tpm
drm 236060 4 i915,drm_kms_helper
snd_page_alloc 7202 2 snd_pcm,snd_hda_intel
shpchp 25457 0
snd_timer 18718 1 snd_pcm
i2c_algo_bit 5391 1 i915
snd 59141 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
i2c_core 23720 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
soundcore 5450 1 snd
mei_me 9296 0
battery 6925 0
mei 62003 1 mei_me
video 11380 1 i915
mperf 1235 0
lpc_ich 13112 0
ac 3324 0
processor 25077 0
button 4669 1 i915
vboxdrv 263994 0
ext4 470284 3
crc16 1359 1 ext4
mbcache 5866 1 ext4
jbd2 83376 1 ext4
sd_mod 30739 8
ahci 22888 5
libahci 21393 1 ahci
ehci_pci 4120 0
libata 171318 2 ahci,libahci
ehci_hcd 48052 1 ehci_pci
xhci_hcd 91357 0
scsi_mod 128695 3 usb_storage,libata,sd_mod
usbcore 178087 8 uvcvideo,usb_storage,ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd
usb_common 1648 1 usbcore
# lshw
xps
description: Portable Computer
product: Dell System XPS L322X (System SKUNumber)
vendor: Dell Inc.
version: 0.1
serial: 2H0CVW1
width: 64 bits
capabilities: smbios-2.7 dmi-2.7 vsyscall32
configuration: administrator_password=unknown boot=normal chassis=portable family=ChiefRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-4800-1030-8043-B2C04F565731
*-core
description: Motherboard
product: 0PJHXN
vendor: Dell Inc.
physical id: 0
version: A00
serial: .2H0CVW1.CN4864332G0061.
slot: Part Component
*-cpu
description: CPU
product: Core i7 (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz
serial: To Be Filled By O.E.M.
slot: CPU Socket - U3E1
size: 2500MHz
capacity: 3100MHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq
configuration: cores=2 enabledcores=2 threads=4
*-cache:0
description: L1 cache
physical id: 6
slot: L1-Cache
size: 32KiB
capacity: 32KiB
capabilities: internal write-through instruction
*-cache:1
description: L2 cache
physical id: 7
slot: L2-Cache
size: 256KiB
capacity: 256KiB
capabilities: internal write-through unified
*-cache:2
description: L3 cache
physical id: 8
slot: L3-Cache
size: 4MiB
capacity: 4MiB
capabilities: internal write-back unified
*-cache
description: L1 cache
physical id: 5
slot: L1-Cache
size: 32KiB
capacity: 32KiB
capabilities: internal write-through data
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: A06
date: 12/03/2012
size: 128KiB
capacity: 6592KiB
capabilities: pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot
*-memory
description: System Memory
physical id: 35
slot: System board or motherboard
size: 8GiB
*-bank:0
description: DIMM DDR3 Synchronous 1600 MHz (0.6 ns)
product: HT5SMRAP
vendor: Hynix/Hyundai
physical id: 0
serial: 00000000
slot: ChannelA-DIMM0
size: 4GiB
width: 64 bits
clock: 1600MHz (0.6ns)
*-bank:1
description: DIMM DDR3 Synchronous 1600 MHz (0.6 ns)
product: HT5SMRAP
vendor: Hynix/Hyundai
physical id: 1
serial: 00000000
slot: ChannelB-DIMM0
size: 4GiB
width: 64 bits
clock: 1600MHz (0.6ns)
*-pci
description: Host bridge
product: 3rd Gen Core processor DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 09
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: 3rd Gen Core processor Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:2000(size=64)
*-usb:0
description: USB controller
product: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:40 memory:d0500000-d050ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 3.11.6-1-ARCH xhci_hcd
physical id: 0
bus info: usb@2
logical name: usb2
version: 3.11
capabilities: usb-3.00
configuration: driver=hub slots=4 speed=5000Mbit/s
*-usb
description: Ethernet interface
product: AX88179
vendor: ASIX Elec. Corp.
physical id: 2
bus info: usb@2:2
logical name: enp0s20u2
version: 1.00
serial: 0000249B0982FA
size: 100Mbit/s
capacity: 1Gbit/s
capabilities: usb-3.00 ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=ax88179_178a duplex=full ip=128.103.14.222 link=yes maxpower=496mA multicast=yes port=MII speed=100Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 3.11.6-1-ARCH xhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: USB hub
product: USB2.0 Hub
vendor: Genesys Logic, Inc.
physical id: 1
bus info: usb@1:1
version: 32.98
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
description: Mouse
product: USB OPTICAL MOUSE
vendor: PIXART
physical id: 1
bus info: usb@1:1.1
version: 1.00
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:1
description: Mass storage device
product: Android Phone
vendor: HTC
physical id: 2
bus info: usb@1:1.2
version: 2.26
serial: HT08DHL10581
capabilities: usb-2.00 scsi
configuration: driver=usb-storage maxpower=500mA speed=480Mbit/s
*-communication
description: Communication controller
product: 7 Series/C210 Series Chipset Family MEI Controller #1
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
resources: irq:42 memory:d0515000-d051500f
*-usb:1
description: USB controller
product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:16 memory:d051a000-d051a3ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.11.6-1-ARCH ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@3:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Video
product: Laptop_Integrated_Webcam_1.3M
vendor: 00248CE62D1E-CC18-000603
physical id: 5
bus info: usb@3:1.5
version: 27.09
capabilities: usb-2.00
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-multimedia
description: Audio device
product: 7 Series/C210 Series Chipset Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:43 memory:d0510000-d0513fff
*-pci
description: PCI bridge
product: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: c4
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 memory:d0400000-d04fffff
*-network DISABLED
description: Wireless interface
product: Centrino Advanced-N 6235
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlp1s0
version: 24
serial: c8:f7:33:83:71:1f
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.11.6-1-ARCH firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
resources: irq:44 memory:d0400000-d0401fff
*-usb:2
description: USB controller
product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:d0519000-d05193ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.11.6-1-ARCH ehci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@4:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-isa
description: ISA bridge
product: QS77 Express Chipset LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 04
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:41 ioport:2098(size=8) ioport:20bc(size=4) ioport:2090(size=8) ioport:20b8(size=4) ioport:2060(size=32) memory:d0518000-d05187ff
*-serial UNCLAIMED
description: SMBus
product: 7 Series/C210 Series Chipset Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 04
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:d0514000-d05140ff ioport:efa0(size=32)
*-battery
product: DELL
vendor: Dynapack
physical id: 1
version: 2008
serial: 1.0
slot: Rear
capacity: 46620mWh
configuration: voltage=7.4V
*-scsi
physical id: 2
bus info: scsi@6
logical name: scsi6
capabilities: scsi-host
configuration: driver=usb-storagePosted to [email protected], I hope I just haven't dawdled for too long and this can make it to 3.13 final.
Hopefully this should be sufficient information, I've linked to this thread too. I've also mentioned I'm willing to beam one at someone from Amazon, with 2-day shipping to the USA the Pluggable branded adapter is just under NZD$40, which I can easily live with.
===========================================================================================================
USB3 gigabit ethernet adapters with the ASIX AX88179 chipset (LevelOne USB0401-V3, Plugable USB3-E1000, SIIG JU-NE0211-S1 and others) are experiencing kernel panics in usb_hcd_map_urb_for_dma since 3.12. The issue does not seem to directly correlate with low or high network activity, occurring seemingly at random. Some panics occurred less than 5 minutes from boot and tens of megabytes of network transfer, while on other occasions it would be stable for multiple days with tens to hundreds of gigabytes of line-rate throughput and several sleep/resume cycles.
Both my Sony Vaio Pro 13 and another user reporting this issue on the Arch forums [1] are Intel-based, my USB controller is an 8086:9c31 (Lynx Point LP), the other is reported as a C210/7 series (unknown PID). A third with a Haswell Dell XPS has attempted my workaround and reports similar success.
I have a mediocre quality photo of my laptop's screen from one of these panics [2], the call trace - which is similar but not identical between my machine and that of the other user reporting the issue - is as follows:
usb_hcd_map_urb_for_dma
usb_hcd_submit_urb
local_bh_enable_ip
selinux_parse_skb
usb_alloc_urb
__kmalloc
usbnet_start_xmit
usbnet_start_xmit
dev_hard_start_xmit
sch_direct_xmit
dev_queue_xmit
ip_finish_output2
ip_finish_output
ip_output
dst_output
ip_local_out
ip_queue_xmit
tcp_transmit_skb
tcp_write_xmit
__tcp_push_pending_frames
tcp_push
tcp_sendmsg
inet_sendmsg
__sock_sendmsg_nosec
sock_sendmsg
set_restore_sigmask
set_restore_sigmask
fget_light
SYSC_sendto
set_restore_sigmask
SyS_sendto
system_call_fastpath
So far as I can tell, the driver is unaffected as late as 3.11.6, but problematic as of 3.12 (and still affected in 3.13-rc5). The history of drivers/net/usb/ax88179_178a.c for this time period yields this patch, which at least in my somewhat limited understanding appeared a likely candidate. I've reverted this on my system - against several linux-next builds from the last 3-4 weeks - and have had no issues with this network controller since.
commit 3804fad45411b48233b48003e33a78f290d227c8
Author: Ming Lei <[email protected]>
Date: Thu Aug 8 21:48:25 2013 +0800
USBNET: ax88179_178a: enable tso if usb host supports sg dma
This patch enables 'can_dma_sg' flag for ax88179_178a device
if the attached host controller supports building packet from
discontinuous buffers(DMA SG is possible), so TSO can be enabled
and skb fragment buffers can be passed to usb stack via urb->sg
directly.
With the patch, system CPU utilization decreased ~50% and throughput
increased by ~10% when doing iperf client test on one ARM A15 dual
core board.
Cc: Ben Hutchings <[email protected]>
Cc: Grant Grundler <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Freddy Xin <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Unfortunately I have not retained the built kernel from a broken 3.12 build, so the system information below reflects the patched linux-next kernel I am running currently.
I understand this may be a somewhat obscure piece of hardware, I am willing to assist by drop-shipping one to someone from Amazon (or local country equivalent if the price is not extortionate) should it be required.
System information:
ver_linux:
Linux neko 3.13.0-rc5-next-20131224+ #1 SMP Sat Dec 28 19:09:27 NZDT 2013 x86_64 Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz GenuineIntel GNU/Linux
Gnu C 4.7.3
Gnu make 4.0
binutils 2.24
util-linux scripts/ver_linux: line 23: fdformat: command not found
mount assert
module-init-tools 16
e2fsprogs 1.42.9
jfsutils 1.1.15
reiserfsprogs 3.6.24
reiser4progs 1.0.7
xfsprogs 3.1.11
quota-tools 4.01.
PPP 2.4.5
Linux C Library 2.17
Dynamic linker (ldd) 2.17
Procps 3.3.9
Net-tools 1.60_p20130513023548
Kbd 2.0.1
Sh-utils 8.22
Modules Loaded bonding rndis_host cdc_ether tun snd_usb_audio snd_usbmidi_lib snd_rawmidi cdc_acm ctr ccm hidp nfsd rfcomm bnep iptable_nat nf_nat_ipv4 nf_nat uvcvideo btusb bluetooth hid_multitouch videobuf2_vmalloc videobuf2_memops videobuf2_core uinput ax88179_178a usbnet mii rtsx_pci_sdmmc rtsx_pci mmc_core fuse snd_hda_codec_realtek iwlmvm kvm_intel snd_hda_codec_generic mac80211 kvm pn544_mei mei_phy iwlwifi pn544 snd_hda_intel hci nfc snd_hda_codec snd_hwdep cfg80211 xhci_hcd
/proc/cpuinfo:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz
stepping : 1
microcode : 0x10
cpu MHz : 2968.125
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 4788.92
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
PCI:
-[0000:00]-+-00.0 Intel Corporation Haswell-ULT DRAM Controller [8086:0a04]
+-02.0 Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16]
+-03.0 Intel Corporation Device [8086:0a0c]
+-14.0 Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31]
+-16.0 Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a]
+-1b.0 Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20]
+-1c.0-[01]----00.0 Intel Corporation Wireless 7260 [8086:08b1]
+-1c.3-[02]--
+-1c.4-[03]----00.0 Samsung Electronics Co Ltd Device [144d:a800]
+-1d.0 Intel Corporation Lynx Point-LP USB EHCI #1 [8086:9c26]
+-1f.0 Intel Corporation Lynx Point-LP LPC Controller [8086:9c43]
\-1f.3 Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22]
USB:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 025: ID 0b95:1790 ASIX Electronics Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 027: ID 8087:07dc Intel Corp.
Bus 002 Device 003: ID 04f2:b3be Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 0eef:a108 D-WAV Scientific Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/proc/modules:
bonding 84837 0 - Live 0xffffffffc00d5000
rndis_host 5162 0 - Live 0xffffffffc0096000
cdc_ether 4324 1 rndis_host, Live 0xffffffffc006e000
tun 16811 0 - Live 0xffffffffc009e000
snd_usb_audio 102474 0 - Live 0xffffffffc007b000
snd_usbmidi_lib 16542 1 snd_usb_audio, Live 0xffffffffc0072000
snd_rawmidi 15891 1 snd_usbmidi_lib, Live 0xffffffffc0017000
cdc_acm 16166 0 - Live 0xffffffffc05ec000
ctr 3471 2 - Live 0xffffffffc05e8000
ccm 6977 2 - Live 0xffffffffc05e3000
hidp 12989 0 - Live 0xffffffffc05db000
nfsd 192979 13 - Live 0xffffffffc059b000
rfcomm 27704 12 - Live 0xffffffffc058e000
bnep 9055 2 - Live 0xffffffffc0587000
iptable_nat 2550 0 - Live 0xffffffffc0583000
nf_nat_ipv4 3118 1 iptable_nat, Live 0xffffffffc057f000
nf_nat 9984 2 iptable_nat,nf_nat_ipv4, Live 0xffffffffc0577000
uvcvideo 60542 0 - Live 0xffffffffc0562000
btusb 14182 0 - Live 0xffffffffc0519000
bluetooth 200149 23 hidp,rfcomm,bnep,btusb, Live 0xffffffffc04d8000
hid_multitouch 8791 0 - Live 0xffffffffc04d1000
videobuf2_vmalloc 2528 1 uvcvideo, Live 0xffffffffc04cd000
videobuf2_memops 1559 1 videobuf2_vmalloc, Live 0xffffffffc04c9000
videobuf2_core 22473 1 uvcvideo, Live 0xffffffffc04be000
uinput 6657 0 - Live 0xffffffffc04b9000
ax88179_178a 11352 0 - Live 0xffffffffc04b2000
usbnet 17066 3 rndis_host,cdc_ether,ax88179_178a, Live 0xffffffffc04a7000
mii 3427 2 ax88179_178a,usbnet, Live 0xffffffffc04a3000
rtsx_pci_sdmmc 8434 0 - Live 0xffffffffc049d000
rtsx_pci 24242 1 rtsx_pci_sdmmc, Live 0xffffffffc0490000
mmc_core 73734 1 rtsx_pci_sdmmc, Live 0xffffffffc0471000
fuse 65180 0 - Live 0xffffffffc0458000
snd_hda_codec_realtek 37786 1 - Live 0xffffffffc0448000
iwlmvm 99382 0 - Live 0xffffffffc03d9000
kvm_intel 119916 0 - Live 0xffffffffc033e000
snd_hda_codec_generic 39626 1 snd_hda_codec_realtek, Live 0xffffffffc032d000
mac80211 352537 1 iwlmvm, Live 0xffffffffc0239000
kvm 332678 1 kvm_intel, Live 0xffffffffc014f000
pn544_mei 1507 0 - Live 0xffffffffc014b000
mei_phy 1942 1 pn544_mei, Live 0xffffffffc0147000
iwlwifi 70257 1 iwlmvm, Live 0xffffffffc0129000
pn544 6215 1 pn544_mei, Live 0xffffffffc0124000
snd_hda_intel 29721 2 - Live 0xffffffffc0106000
hci 13343 2 mei_phy,pn544, Live 0xffffffffc00fd000
nfc 46459 2 pn544,hci, Live 0xffffffffc00c8000
snd_hda_codec 72588 3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel, Live 0xffffffffc00a7000
snd_hwdep 5373 2 snd_usb_audio,snd_hda_codec, Live 0xffffffffc009b000
cfg80211 320801 3 iwlmvm,mac80211,iwlwifi, Live 0xffffffffc001e000
xhci_hcd 88348 0 - Live 0xffffffffc0000000
/proc/iomem:
00000000-00000fff : reserved
00001000-00057fff : System RAM
00058000-00058fff : reserved
00059000-0009dfff : System RAM
0009e000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-ca4b7fff : System RAM
06000000-066753ba : Kernel code
066753bb-06cc83ff : Kernel data
06dc9000-06ecffff : Kernel bss
ca4b8000-ca4befff : ACPI Non-volatile Storage
ca4bf000-ca8e7fff : System RAM
ca8e8000-cac39fff : reserved
cac3a000-da89bfff : System RAM
da89c000-dab3ffff : reserved
dab40000-dab55fff : ACPI Tables
dab56000-dbaaafff : ACPI Non-volatile Storage
dbaab000-dbffefff : reserved
dbfff000-dbffffff : System RAM
dd000000-df1fffff : reserved
dd200000-df1fffff : Graphics Stolen Memory
df200000-feafffff : PCI Bus 0000:00
df200000-df3fffff : PCI Bus 0000:01
e0000000-efffffff : 0000:00:02.0
e0000000-e07e8fff : BOOTFB
f0000000-f09fffff : PCI Bus 0000:03
f0a00000-f13fffff : PCI Bus 0000:02
f6400000-f67fffff : 0000:00:02.0
f6800000-f71fffff : PCI Bus 0000:03
f6800000-f680ffff : 0000:03:00.0
f6810000-f6811fff : 0000:03:00.0
f6810000-f6811fff : ahci
f7200000-f7bfffff : PCI Bus 0000:02
f7c00000-f7cfffff : PCI Bus 0000:01
f7c00000-f7c01fff : 0000:01:00.0
f7c00000-f7c01fff : iwlwifi
f7d00000-f7d0ffff : 0000:00:14.0
f7d00000-f7d0ffff : xhci_hcd
f7d10000-f7d13fff : 0000:00:1b.0
f7d10000-f7d13fff : ICH HD audio
f7d14000-f7d17fff : 0000:00:03.0
f7d19000-f7d190ff : 0000:00:1f.3
f7d1a000-f7d1a3ff : 0000:00:1d.0
f7d1a000-f7d1a3ff : ehci_hcd
f7d1c000-f7d1c01f : 0000:00:16.0
f7d1c000-f7d1c01f : mei_me
f7fef000-f7feffff : pnp 00:0a
f7ff0000-f7ffffff : pnp 00:0a
f8000000-fbffffff : PCI MMCONFIG 0000 [bus 00-3f]
f8000000-fbffffff : reserved
f8000000-fbffffff : pnp 00:0a
fec00000-fec00fff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed03fff : reserved
fed00000-fed003ff : HPET 0
fed10000-fed17fff : pnp 00:0a
fed18000-fed18fff : pnp 00:0a
fed19000-fed19fff : pnp 00:0a
fed1c000-fed1ffff : reserved
fed1c000-fed1ffff : pnp 00:0a
fed1f410-fed1f414 : iTCO_wdt
fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:0a
fed45000-fed8ffff : pnp 00:0a
fed90000-fed93fff : pnp 00:0a
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ff000000-ffffffff : reserved
ff000000-ffffffff : pnp 00:0a
100000000-21fdfffff : System RAM
21fe00000-21fffffff : RAM buffer
/proc/ioports:
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
04d0-04d1 : pnp 00:07
0680-069f : pnp 00:04
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
164e-164f : pnp 00:04
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1810-1815 : ACPI CPU throttle
1830-1833 : iTCO_wdt
1830-1833 : iTCO_wdt
1850-1850 : ACPI PM2_CNT_BLK
1854-1857 : pnp 00:06
1860-187f : iTCO_wdt
1860-187f : iTCO_wdt
1880-189f : ACPI GPE0_BLK
1c00-1cfe : pnp 00:04
1d00-1dfe : pnp 00:04
1e00-1efe : pnp 00:04
1f00-1ffe : pnp 00:04
2008-200b : pnp 00:04
3000-3fff : PCI Bus 0000:01
d000-dfff : PCI Bus 0000:03
e000-efff : PCI Bus 0000:02
f000-f03f : 0000:00:02.0
f040-f05f : 0000:00:1f.3
ffff-ffff : pnp 00:04
ffff-ffff : pnp 00:04
Regards,
Thomas -
Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100
I am curretly running CS6 on my dell xps 9100
Windows 7 64bit
12GB Ram
2TB HD + 0 Rate 2TB External Drive (x2)
Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
Memory and Storage
The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
Video
ATI Radeon HD5870 with 1024 megabytes of RAM
Expansion and Networking
The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
PCI Express x1 card slot (PCIE1X3)
PCI Express x16 card slot (PCIE16_1)
PCI Express x1 card slot (PCIE1X2)
PCI Express x1 card slot (PCIE1X1)
PCI Express x8 card slot (PCIE8_2)
Chassis and Power
The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
GeForce GTX 285 (Windows and Mac OS)
GeForce GTX 470 (Windows)
GeForce GTX 570 (Windows)
GeForce GTX 580 (Windows)
NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
Quadro FX 3700M (Windows)
Quadro FX 3800 (Windows)
Quadro FX 3800M (Windows)
Quadro FX 4800 (Windows and Mac OS)
Quadro FX 5800 (Windows)
Quadro 2000 (Windows)
Quadro 2000D (Windows)
Quadro 2000M (Windows)
Quadro 3000M (Windows)
Quadro 4000 (Windows and Mac OS)
Quadro 4000M (Windows)
Quadro 5000 (Windows)
Quadro 5000M (Windows)
Quadro 5010M (Windows)
Quadro 6000 (Windows)
Quadro CX (Windows)
Tesla C2075** (Windows)Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference
Maybe you are looking for
-
IWeb not opening after some issues with an existing site...
Hi there~ I’m a relatively new Mac user and a former PC/Dreamweaver user. I’m having a bit of an issue with iWeb. I’ll do my best to keep what happened relatively brief: 1. I had created and published a site a couple of months ago, but the page that
-
Customer Master Replication from R3 to CRM
Hi Experts, I am going to replicate Customer master from R3 to CRM system.As we all know ECC or R/3 and CRM customer master data is based on two different data models. So in order to avoid the Errors I would like below clarifications cleared. 1- I wo
-
I have a textArea(attached is a document listenter and a CaretListener) where I am trying to amend the contents. What I am trying to accomplish is when a user inputs text into the textArea that he/she cannot enter text past a certain point (ie caret
-
Xfinity home security - Outdoor security camara
Having connection problem with rear ourdoor security camera on touch screen pad and phone app. Please advise. The front camara is working.
-
Hi. I will be upgrading my computer. My underlying need is portability and thus I am looking at ultrabooks. Of the machines that I currently like that I have currently seen, my choice seems to be Windows 8 but have limited RAM (4GB which is'nt upg