DELL XPS STUDIO 16 (1640) input hotplugging (evdev) catalyst issues
Does input hot plugging work for anyone with dell studio xps laptops? also has anyone sucessfully installed catalyst 9.6 with 2.6.30 kernel?
I have this exact same problem, though I have a touchscreen monitor for my PC rather than a laptop. This is a bit awkward, but until I find a real solution, this works just fine: when you want to use the touch screen for CS6, hold down the mouse button. You may have to use the mouse to tap the tools you want, but at least there's a temporary solution.
Similar Messages
-
I was just looking online and can't seem to find this now. Dell XPS Studio 8300
It looks like DELL has recalled XPS Studio 8300 from retailers and stopped selling from their website due to a faulty Intel chip that would lead to hard drive failure.
google "dell XPS 8300 recall"
I bought this about two weeks ago and have already loaded tons of stuff, programs & activated, etc.. :-( -
Dell XPS Laptop Touch Screen Inputs Interpreted as Panning Photoshop CS6
I have been working with Adobe Illustrator for a little while now and decided that I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version? I am interested in buying Photoshop so I can use it whenever I’d like for longer than the 30 day trial allows, but I certainly don’t want to buy it if I cannot use my stylus on the touch screen to draw. Any help is much appreciated!
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool. http://www.youtube.com/watch?v=Zd1NOBway4o
Uhhh yah. Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 8086 MB
Free memory: 4677 MB
Memory available to Photoshop: 7156 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2455
Driver Date: 20110719000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.8577
Driver Date: 20111103000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Ryan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 911.9G, 762.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Entropy 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Maximum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mean 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Median 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
Minimum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Range 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Skewness 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Sumi-e 13.0
Summation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEI have this exact same problem, though I have a touchscreen monitor for my PC rather than a laptop. This is a bit awkward, but until I find a real solution, this works just fine: when you want to use the touch screen for CS6, hold down the mouse button. You may have to use the mouse to tap the tools you want, but at least there's a temporary solution.
-
Putting a AMD R9 270 in a Dell XPS 7100 from 2010
Currently have a Dell XPS 7100 (2010) with a HD 5870. I would like to remove the HD 5870 and add a AMD R9 270. I believe I am OK as far as space, power, bottlenecking, and PCI slot. However, I read a thread in a forum that the Dell XPS 7100 motherboard BIOS will not recognize the R9 270 graphics card. Has anyone performed a similar GPU change on a Dell XPS 7100 or heard of such a BIOS issue?
Did the installation and it seems to be working alright.
-
Can't get NVIDIA/Intel Optimus (Dell XPS 15) to work, startx fails.
I have an up to date Arch and am working from a clean install. I'm trying to run X using NVIDIA only, as outlined here: https://wiki.archlinux.org/index.php/NV … ing_nvidia . I don't want to use bumblebee unless this just can't work.
The text that comes after a failed startx seems relevant, aswell as the dmesg. The only thing that seems off to me in the xorg log is:
[ 184.863] (EE) Screen 1 deleted because of no matching config section.
[ 184.863] (II) UnloadModule: "modesetting"
and
[ 189.571] (EE) NVIDIA(0): Failed to initiate mode change.
[ 189.571] (EE) NVIDIA(0): Failed to complete mode change
I've also add rcutree.rcu_idle_gp_delay=1 to /boot/syslinux/syslinux.cfg , if I don't do that the xorg log says that NVIDIA "fails to initialize".
I've also executed "systemctl start acpid.service" so I don't get ACPI errors in the xorg log file.
I don't think I have the intel drivers installed, don't think I need them, but I installed the xf86 modesetting driver.
Anyway here are my relevant logs and config files:
The last line that comes after a failed startx is:
waiting for X server to shut down .(EE) Server terminated successfully (0). Closing log file. out foradjust shatters 0 3200need to create shared pixmap 1xinit: connection to X server lost
My xorg.conf looks like this:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "nvidia"
Inactive "intel"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "Unknown"
# ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0 - 72.0
# Option "DPMS"
#EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:2:0:0"
VendorName "NVIDIA Corporation"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
# BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "UseDisplayDevice" "none"
# Option "AllowEmptyInitialConfiguration" "true"
# Monitor "Monitor0"
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
And here is the xorg log and dmesg output:
dmesg:
[ 185.077229] vgaarb: this pci device is not a vga device
[ 185.079025] nvidia 0000:02:00.0: irq 54 for MSI/MSI-X
[ 185.099233] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099382] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099467] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099545] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099620] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099694] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099814] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 185.099890] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 188.096884] ACPI Error: Field [TMPB] at 282624 exceeds Buffer [ROM1] size 262144 (bits) (20131218/dsopcode-236)
[ 188.096900] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff88041f07ded8), AE_AML_BUFFER_LIMIT (20131218/psparse-536)
[ 188.111328] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 189.778474] vgaarb: this pci device is not a vga device
Xorg.0.log:
[ 184.732]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 184.732] X Protocol Version 11, Revision 0
[ 184.732] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 184.732] Current Operating System: Linux BASE 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 184.732] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb1 rw rcutree.rcu_idle_gp_delay=1 initrd=../initramfs-linux.img
[ 184.732] Build Date: 14 April 2014 08:39:09AM
[ 184.732]
[ 184.733] Current version of pixman: 0.32.4
[ 184.733] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 184.733] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 184.733] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 27 21:10:17 2014
[ 184.735] (==) Using config file: "/etc/X11/xorg.conf"
[ 184.735] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 184.737] (==) ServerLayout "Layout0"
[ 184.737] (**) |-->Screen "nvidia" (0)
[ 184.737] (**) | |-->Monitor "<default monitor>"
[ 184.737] (**) | |-->Device "nvidia"
[ 184.737] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 184.737] (**) |-->Inactive Device "intel"
[ 184.737] (**) |-->Input Device "Keyboard0"
[ 184.737] (**) |-->Input Device "Mouse0"
[ 184.737] (==) Automatically adding devices
[ 184.737] (==) Automatically enabling devices
[ 184.737] (==) Automatically adding GPU devices
[ 184.744] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 184.744] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 184.744] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 184.744] (WW) Disabling Keyboard0
[ 184.744] (WW) Disabling Mouse0
[ 184.744] (II) Loader magic: 0x804c80
[ 184.744] (II) Module ABI versions:
[ 184.744] X.Org ANSI C Emulation: 0.4
[ 184.744] X.Org Video Driver: 15.0
[ 184.744] X.Org XInput driver : 20.0
[ 184.744] X.Org Server Extension : 8.0
[ 184.744] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 184.744] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 184.747] (--) PCI:*(0:0:2:0) 8086:0416:1028:05fe rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 184.747] (--) PCI: (0:2:0:0) 10de:0fe4:1028:05fe rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 184.748] (II) Open ACPI successful (/var/run/acpid.socket)
[ 184.748] Initializing built-in extension Generic Event Extension
[ 184.748] Initializing built-in extension SHAPE
[ 184.748] Initializing built-in extension MIT-SHM
[ 184.748] Initializing built-in extension XInputExtension
[ 184.748] Initializing built-in extension XTEST
[ 184.748] Initializing built-in extension BIG-REQUESTS
[ 184.748] Initializing built-in extension SYNC
[ 184.748] Initializing built-in extension XKEYBOARD
[ 184.748] Initializing built-in extension XC-MISC
[ 184.749] Initializing built-in extension SECURITY
[ 184.749] Initializing built-in extension XINERAMA
[ 184.749] Initializing built-in extension XFIXES
[ 184.749] Initializing built-in extension RENDER
[ 184.749] Initializing built-in extension RANDR
[ 184.749] Initializing built-in extension COMPOSITE
[ 184.749] Initializing built-in extension DAMAGE
[ 184.749] Initializing built-in extension MIT-SCREEN-SAVER
[ 184.749] Initializing built-in extension DOUBLE-BUFFER
[ 184.749] Initializing built-in extension RECORD
[ 184.749] Initializing built-in extension DPMS
[ 184.749] Initializing built-in extension Present
[ 184.749] Initializing built-in extension DRI3
[ 184.749] Initializing built-in extension X-Resource
[ 184.749] Initializing built-in extension XVideo
[ 184.750] Initializing built-in extension XVideo-MotionCompensation
[ 184.750] Initializing built-in extension XFree86-VidModeExtension
[ 184.750] Initializing built-in extension XFree86-DGA
[ 184.750] Initializing built-in extension XFree86-DRI
[ 184.750] Initializing built-in extension DRI2
[ 184.750] (II) LoadModule: "glx"
[ 184.754] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 184.846] (II) Module glx: vendor="NVIDIA Corporation"
[ 184.846] compiled for 4.0.2, module version = 1.0.0
[ 184.846] Module class: X.Org Server Extension
[ 184.846] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 184.846] Loading extension GLX
[ 184.846] (II) LoadModule: "nvidia"
[ 184.847] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 184.854] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 184.854] compiled for 4.0.2, module version = 1.0.0
[ 184.854] Module class: X.Org Video Driver
[ 184.855] (II) LoadModule: "modesetting"
[ 184.855] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 184.856] (II) Module modesetting: vendor="X.Org Foundation"
[ 184.856] compiled for 1.15.0, module version = 0.8.1
[ 184.856] Module class: X.Org Video Driver
[ 184.856] ABI class: X.Org Video Driver, version 15.0
[ 184.856] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 184.856] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 184.856] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 184.856] (++) using VT number 1
[ 184.857] (II) Loading sub module "fb"
[ 184.858] (II) LoadModule: "fb"
[ 184.858] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 184.859] (II) Module fb: vendor="X.Org Foundation"
[ 184.859] compiled for 1.15.1, module version = 1.0.0
[ 184.859] ABI class: X.Org ANSI C Emulation, version 0.4
[ 184.859] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 184.859] (II) Loading sub module "wfb"
[ 184.859] (II) LoadModule: "wfb"
[ 184.859] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 184.861] (II) Module wfb: vendor="X.Org Foundation"
[ 184.861] compiled for 1.15.1, module version = 1.0.0
[ 184.861] ABI class: X.Org ANSI C Emulation, version 0.4
[ 184.861] (II) Loading sub module "ramdac"
[ 184.861] (II) LoadModule: "ramdac"
[ 184.861] (II) Module "ramdac" already built-in
[ 184.863] (II) modesetting(1): using drv /dev/dri/card0
[ 184.863] (II) modesetting(G0): using drv /dev/dri/card0
[ 184.863] (EE) Screen 1 deleted because of no matching config section.
[ 184.863] (II) UnloadModule: "modesetting"
[ 184.863] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 184.863] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 184.863] (==) NVIDIA(0): RGB weight 888
[ 184.863] (==) NVIDIA(0): Default visual is TrueColor
[ 184.863] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 184.863] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 184.863] (**) NVIDIA(0): Enabling 2D acceleration
[ 184.864] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 184.864] (**) NVIDIA(0): mode
[ 188.491] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 188.494] (II) NVIDIA(0): NVIDIA GPU GeForce GT 750M (GK107) at PCI:2:0:0 (GPU-0)
[ 188.494] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 188.494] (--) NVIDIA(0): VideoBIOS: 80.07.b3.00.10
[ 188.494] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 188.494] (--) NVIDIA(0): Valid display device(s) on GeForce GT 750M at PCI:2:0:0
[ 188.494] (--) NVIDIA(0): none
[ 188.494] (II) NVIDIA(0): Validated MetaModes:
[ 188.494] (II) NVIDIA(0): "NULL"
[ 188.494] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 188.494] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 188.494] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 188.495] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 188.495] (==) modesetting(G0): RGB weight 888
[ 188.495] (==) modesetting(G0): Default visual is TrueColor
[ 188.495] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 188.495] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[ 188.520] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 188.520] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 188.520] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 188.521] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[ 188.521] (II) modesetting(G0): EDID for output eDP-1-0
[ 188.521] (II) modesetting(G0): Manufacturer: SHP Model: 13f8 Serial#: 0
[ 188.521] (II) modesetting(G0): Year: 2013 Week: 34
[ 188.521] (II) modesetting(G0): EDID Version: 1.4
[ 188.521] (II) modesetting(G0): Digital Display Input
[ 188.521] (II) modesetting(G0): 8 bits per channel
[ 188.521] (II) modesetting(G0): Digital interface is DisplayPort
[ 188.521] (II) modesetting(G0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 188.521] (II) modesetting(G0): Gamma: 2.20
[ 188.521] (II) modesetting(G0): No DPMS capabilities specified
[ 188.521] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 188.521] (II) modesetting(G0): Default color space is primary color space
[ 188.521] (II) modesetting(G0): First detailed timing is preferred mode
[ 188.521] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[ 188.521] (II) modesetting(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 188.521] (II) modesetting(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 188.521] (II) modesetting(G0): Manufacturer's mask: 0
[ 188.521] (II) modesetting(G0): Supported detailed timing:
[ 188.521] (II) modesetting(G0): clock: 373.2 MHz Image Size: 346 x 194 mm
[ 188.522] (II) modesetting(G0): h_active: 3200 h_sync: 3248 h_sync_end 3280 h_blank_end 3360 h_border: 0
[ 188.522] (II) modesetting(G0): v_active: 1800 v_sync: 1803 v_sync_end 1808 v_blanking: 1852 v_border: 0
[ 188.522] (II) modesetting(G0): 6RGW0\80LQ156Z1
[ 188.522] (II) modesetting(G0): Unknown vendor-specific block 0
[ 188.522] (II) modesetting(G0): EDID (in hex):
[ 188.522] (II) modesetting(G0): 00ffffffffffff004d10f81300000000
[ 188.522] (II) modesetting(G0): 22170104a52313780ede50a3544c9926
[ 188.522] (II) modesetting(G0): 0f505400000001010101010101010101
[ 188.522] (II) modesetting(G0): 010101010101cd9180a0c00834703020
[ 188.522] (II) modesetting(G0): 35005ac2100000180000001000000000
[ 188.522] (II) modesetting(G0): 00000000000000000000000000fe0036
[ 188.522] (II) modesetting(G0): 52475730804c513135365a3100000000
[ 188.522] (II) modesetting(G0): 0002010328001200000b010a2020001b
[ 188.522] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 188.522] (II) modesetting(G0): Modeline "3200x1800"x60.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 188.522] (II) modesetting(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 188.522] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 188.546] (II) modesetting(G0): EDID for output VGA-1-0
[ 188.547] (II) modesetting(G0): EDID for output HDMI-1-0
[ 188.547] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 188.547] (II) modesetting(G0): EDID for output HDMI-1-1
[ 188.547] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 188.548] (==) modesetting(G0): DPI set to (96, 96)
[ 188.548] (II) Loading sub module "fb"
[ 188.548] (II) LoadModule: "fb"
[ 188.548] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 188.548] (II) Module fb: vendor="X.Org Foundation"
[ 188.548] compiled for 1.15.1, module version = 1.0.0
[ 188.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 188.548] (II) Loading sub module "shadow"
[ 188.548] (II) LoadModule: "shadow"
[ 188.548] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 188.549] (II) Module shadow: vendor="X.Org Foundation"
[ 188.549] compiled for 1.15.1, module version = 1.1.0
[ 188.549] ABI class: X.Org ANSI C Emulation, version 0.4
[ 188.549] (--) Depth 24 pixmap format is 32 bpp
[ 188.551] (==) modesetting(G0): Backing store enabled
[ 188.551] (==) modesetting(G0): Silken mouse enabled
[ 188.551] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 188.551] (==) modesetting(G0): DPMS enabled
[ 188.551] (WW) modesetting(G0): Option "UseDisplayDevice" is not used
[ 189.560] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 189.560] (II) NVIDIA: access.
[ 189.571] (II) NVIDIA(0): Setting mode "NULL"
[ 189.571] (EE) NVIDIA(0): Failed to initiate mode change.
[ 189.571] (EE) NVIDIA(0): Failed to complete mode change
[ 189.604] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 189.604] Loading extension NV-GLX
[ 189.617] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 189.617] (==) NVIDIA(0): Backing store enabled
[ 189.617] (==) NVIDIA(0): Silken mouse enabled
[ 189.617] (==) NVIDIA(0): DPMS enabled
[ 189.618] Loading extension NV-CONTROL
[ 189.619] (II) Loading sub module "dri2"
[ 189.619] (II) LoadModule: "dri2"
[ 189.619] (II) Module "dri2" already built-in
[ 189.619] (II) NVIDIA(0): [DRI2] Setup complete
[ 189.619] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 189.619] (--) RandR disabled
[ 189.642] (II) Initializing extension GLX
[ 189.644] (II) modesetting(G0): Damage tracking initialized
[ 189.985] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 189.985] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 189.985] (II) LoadModule: "evdev"
[ 189.986] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 189.989] (II) Module evdev: vendor="X.Org Foundation"
[ 189.989] compiled for 1.15.1, module version = 2.9.0
[ 189.989] Module class: X.Org XInput Driver
[ 189.989] ABI class: X.Org XInput driver, version 20.0
[ 189.989] (II) Using input driver 'evdev' for 'Power Button'
[ 189.989] (**) Power Button: always reports core events
[ 189.989] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 189.989] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 189.989] (--) evdev: Power Button: Found keys
[ 189.989] (II) evdev: Power Button: Configuring as keyboard
[ 189.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 189.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 189.989] (**) Option "xkb_rules" "evdev"
[ 189.989] (**) Option "xkb_model" "pc104"
[ 189.989] (**) Option "xkb_layout" "us"
[ 190.041] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 190.041] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 190.041] (II) Using input driver 'evdev' for 'Video Bus'
[ 190.041] (**) Video Bus: always reports core events
[ 190.041] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 190.041] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 190.041] (--) evdev: Video Bus: Found keys
[ 190.041] (II) evdev: Video Bus: Configuring as keyboard
[ 190.041] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event10"
[ 190.041] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 190.041] (**) Option "xkb_rules" "evdev"
[ 190.041] (**) Option "xkb_model" "pc104"
[ 190.041] (**) Option "xkb_layout" "us"
[ 190.042] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 190.042] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 190.042] (II) Using input driver 'evdev' for 'Video Bus'
[ 190.042] (**) Video Bus: always reports core events
[ 190.042] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 190.043] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 190.043] (--) evdev: Video Bus: Found keys
[ 190.043] (II) evdev: Video Bus: Configuring as keyboard
[ 190.043] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input10/event9"
[ 190.043] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 190.043] (**) Option "xkb_rules" "evdev"
[ 190.043] (**) Option "xkb_model" "pc104"
[ 190.043] (**) Option "xkb_layout" "us"
[ 190.044] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 190.044] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 190.044] (II) Using input driver 'evdev' for 'Power Button'
[ 190.044] (**) Power Button: always reports core events
[ 190.044] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 190.044] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 190.044] (--) evdev: Power Button: Found keys
[ 190.044] (II) evdev: Power Button: Configuring as keyboard
[ 190.044] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 190.044] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 190.044] (**) Option "xkb_rules" "evdev"
[ 190.044] (**) Option "xkb_model" "pc104"
[ 190.044] (**) Option "xkb_layout" "us"
[ 190.045] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 190.046] (II) No input driver specified, ignoring this device.
[ 190.046] (II) This device may have been added with another device file.
[ 190.046] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 190.046] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 190.047] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 190.047] (II) No input driver specified, ignoring this device.
[ 190.047] (II) This device may have been added with another device file.
[ 190.047] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[ 190.047] (II) No input driver specified, ignoring this device.
[ 190.047] (II) This device may have been added with another device file.
[ 190.048] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 190.048] (II) No input driver specified, ignoring this device.
[ 190.048] (II) This device may have been added with another device file.
[ 190.048] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event15)
[ 190.048] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 190.048] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 190.049] (**) Integrated_Webcam_HD: always reports core events
[ 190.049] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event15"
[ 190.049] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x573c
[ 190.049] (--) evdev: Integrated_Webcam_HD: Found keys
[ 190.049] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 190.049] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input17/event15"
[ 190.049] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[ 190.049] (**) Option "xkb_rules" "evdev"
[ 190.049] (**) Option "xkb_model" "pc104"
[ 190.049] (**) Option "xkb_layout" "us"
[ 190.050] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event16)
[ 190.050] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 190.050] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 190.050] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 190.050] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event16"
[ 190.050] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 190.051] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 190.051] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 190.051] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 190.051] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 190.051] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 190.051] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 190.051] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 190.051] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 190.051] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input18/event16"
[ 190.051] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 11)
[ 190.051] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 190.051] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 190.052] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 190.052] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 190.052] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 190.052] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse2)
[ 190.052] (II) No input driver specified, ignoring this device.
[ 190.052] (II) This device may have been added with another device file.
[ 190.053] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event17)
[ 190.053] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 190.053] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 190.053] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 190.054] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event17"
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 190.054] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 190.054] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 190.054] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 190.054] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 190.054] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 190.054] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 190.054] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 190.054] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 190.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input19/event17"
[ 190.054] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 12)
[ 190.054] (**) Option "xkb_rules" "evdev"
[ 190.054] (**) Option "xkb_model" "pc104"
[ 190.054] (**) Option "xkb_layout" "us"
[ 190.055] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 190.055] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 190.055] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 190.055] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 190.055] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 190.055] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 190.056] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/event14)
[ 190.056] (**) SYNAPTICS Synaptics Large Touch Screen: Applying InputClass "evdev touchscreen catchall"
[ 190.056] (II) Using input driver 'evdev' for 'SYNAPTICS Synaptics Large Touch Screen'
[ 190.056] (**) SYNAPTICS Synaptics Large Touch Screen: always reports core events
[ 190.056] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: Device: "/dev/input/event14"
[ 190.056] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Vendor 0x6cb Product 0xac3
[ 190.056] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute axes
[ 190.056] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute multitouch axes
[ 190.057] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: No buttons found, faking one.
[ 190.057] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found x and y absolute axes
[ 190.057] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute touchscreen
[ 190.057] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Configuring as touchscreen
[ 190.057] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: YAxisMapping: buttons 4 and 5
[ 190.057] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 190.057] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0004/input/input15/event14"
[ 190.057] (II) XINPUT: Adding extended input device "SYNAPTICS Synaptics Large Touch Screen" (type: TOUCHSCREEN, id 13)
[ 190.057] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: initialized for absolute axes.
[ 190.057] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) keeping acceleration scheme 1
[ 190.057] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration profile 0
[ 190.057] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration factor: 2.000
[ 190.057] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration threshold: 4
[ 190.058] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/mouse1)
[ 190.058] (II) No input driver specified, ignoring this device.
[ 190.058] (II) This device may have been added with another device file.
[ 190.059] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 190.059] (II) No input driver specified, ignoring this device.
[ 190.059] (II) This device may have been added with another device file.
[ 190.059] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 190.059] (II) No input driver specified, ignoring this device.
[ 190.059] (II) This device may have been added with another device file.
[ 190.060] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 190.060] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 190.060] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 190.060] (**) AT Translated Set 2 keyboard: always reports core events
[ 190.060] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 190.060] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 190.060] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 190.060] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 190.060] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 190.060] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 190.060] (**) Option "xkb_rules" "evdev"
[ 190.060] (**) Option "xkb_model" "pc104"
[ 190.061] (**) Option "xkb_layout" "us"
[ 190.062] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 190.062] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 190.062] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 190.062] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 190.062] (II) LoadModule: "synaptics"
[ 190.062] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 190.063] (II) Module synaptics: vendor="X.Org Foundation"
[ 190.063] compiled for 1.15.1, module version = 1.8.0
[ 190.063] Module class: X.Org XInput Driver
[ 190.063] ABI class: X.Org XInput driver, version 20.0
[ 190.063] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 190.063] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 190.063] (**) Option "Device" "/dev/input/event8"
[ 190.123] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5660 (res 42)
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4646 (res 44)
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 190.123] (**) Option "TapButton1" "1"
[ 190.123] (**) Option "TapButton2" "2"
[ 190.123] (**) Option "TapButton3" "3"
[ 190.123] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 190.123] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 190.123] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 190.150] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[ 190.150] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 190.150] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 190.150] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 190.150] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 190.150] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 190.150] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 190.150] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 190.150] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 190.150] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 190.151] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 190.151] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 190.151] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 190.151] (II) No input driver specified, ignoring this device.
[ 190.151] (II) This device may have been added with another device file.
[ 190.152] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 190.152] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 190.152] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 190.152] (**) Dell WMI hotkeys: always reports core events
[ 190.152] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 190.152] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 190.152] (--) evdev: Dell WMI hotkeys: Found keys
[ 190.152] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 190.152] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event7"
[ 190.152] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 190.152] (**) Option "xkb_rules" "evdev"
[ 190.152] (**) Option "xkb_model" "pc104"
[ 190.152] (**) Option "xkb_layout" "us"
[ 190.272] (II) modesetting(G0): EDID vendor "SHP", prod id 5112
[ 190.272] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 190.272] (II) modesetting(G0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 190.297] reporting 3 5 25 194
[ 190.349] have a master to look out for
[ 190.349] adjust shatters 0 3200
[ 190.362] need to create shared pixmap 1(II) evdev: Dell WMI hotkeys: Close
[ 191.968] (II) UnloadModule: "evdev"
[ 191.968] (II) UnloadModule: "synaptics"
[ 191.968] (II) evdev: AT Translated Set 2 keyboard: Close
[ 191.968] (II) UnloadModule: "evdev"
[ 191.968] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Close
[ 191.968] (II) UnloadModule: "evdev"
[ 191.968] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Close
[ 191.968] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Integrated_Webcam_HD: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Power Button: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Video Bus: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Video Bus: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 191.969] (II) evdev: Power Button: Close
[ 191.969] (II) UnloadModule: "evdev"
[ 192.058] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 192.486] (EE) Server terminated successfully (0). Closing log file.
--Edit--
Forget to mention that I also have this in my .xinitrc file:
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto
Last edited by gautamadude (2014-05-27 22:01:39)I cant get my T530 to boot on the discrete graphics card either (Nvidia) unless I add (EDIT: to the kernel boot line in grub.cfg):
noapic
Note that I did NOT write noacpi, but noapic. See this thread:
https://bbs.archlinux.org/viewtopic.php?id=175672
**EDIT2** Actually, you might try noacpi and noapic, and then both at the same time considering your mention of acpi in your OP.
Last edited by GSF1200S (2014-05-29 17:08:07) -
Headphone output stopped working (snd-hda, Dell XPS 13)
Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
The closest I've been able to get at the problem is this:
[~]% alsactl monitor
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
Any hints would be greatly appreciated!
More info:
[~]% cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel enable=0,1
options snd-hda-intel model=dell-headset-multi,dell-headset-multi
This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
$ cat /sys/module/snd_hda_intel/parameters/model
dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
To verify these options are actually being used
$ id -Gn
martin wheel video audio vboxusers nfs
I'm in the audio group, not sure if this is required, but can't hurt.
[~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
Some misc. info:
$ grep Codec /proc/asound/card*/codec*
Codec: Realtek ALC3661
[~]% lsmod | grep ^snd
snd_usb_audio 135316 0
snd_usbmidi_lib 27484 1 snd_usb_audio
snd_rawmidi 26806 1 snd_usbmidi_lib
snd_seq_device 13132 1 snd_rawmidi
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
snd_hda_intel 26327 3
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
$ lspci -vv
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
[ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
[ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 1973782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12386 pages used for memmap
[ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31981568 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.295 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20140424
[ 0.020000] ACPI: All ACPI Tables successfully acquired
[ 0.020260] Security Framework initialized
[ 0.020267] Yama: becoming mindful.
[ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024116] Initializing cgroup subsys memory
[ 0.024140] Initializing cgroup subsys devices
[ 0.024147] Initializing cgroup subsys freezer
[ 0.024150] Initializing cgroup subsys net_cls
[ 0.024155] Initializing cgroup subsys blkio
[ 0.024183] CPU: Physical Processor ID: 0
[ 0.024184] CPU: Processor Core ID: 0
[ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025376] mce: CPU supports 7 MCE banks
[ 0.025391] CPU0: Thermal monitoring enabled (TM1)
[ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.026475] ftrace: allocating 20445 entries in 80 pages
[ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.071098] TSC deadline timer enabled
[ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071149] ... version: 3
[ 0.071150] ... bit width: 48
[ 0.071151] ... generic registers: 4
[ 0.071152] ... value mask: 0000ffffffffffff
[ 0.071154] ... max period: 0000ffffffffffff
[ 0.071155] ... fixed-purpose events: 3
[ 0.071156] ... event mask: 000000070000000f
[ 0.097907] x86: Booting SMP configuration:
[ 0.097909] .... node #0, CPUs: #1
[ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.119293] #2 #3
[ 0.154938] x86: Booted up 1 node, 4 CPUs
[ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
[ 0.160676] devtmpfs: initialized
[ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[ 0.164642] pinctrl core: initialized pinctrl subsystem
[ 0.164688] RTC time: 22:42:27, date: 10/21/14
[ 0.164750] NET: Registered protocol family 16
[ 0.164884] cpuidle: using governor ladder
[ 0.164887] cpuidle: using governor menu
[ 0.164916] ACPI: bus type PCI registered
[ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165118] PCI: Using configuration type 1 for base access
[ 0.165125] dmi type 0xB1 record - unknown flag
[ 0.177572] ACPI: Added _OSI(Module Device)
[ 0.177575] ACPI: Added _OSI(Processor Device)
[ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207326] ACPI: Dynamic OEM Table Load:
[ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.220827] ACPI: Dynamic OEM Table Load:
[ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.237345] ACPI: Dynamic OEM Table Load:
[ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.255255] ACPI: Interpreter enabled
[ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.255298] ACPI: (supports S0 S3 S4 S5)
[ 0.255300] ACPI: Using IOAPIC for interrupt routing
[ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.268573] \_SB_.PCI0:_OSC invalid UUID
[ 0.268575] _OSC request data:1 1f 0
[ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.269580] PCI host bridge to bus 0000:00
[ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
[ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
[ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
[ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
[ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
[ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
[ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.295559] vgaarb: loaded
[ 0.295560] vgaarb: bridge control possible 0000:00:02.0
[ 0.295603] PCI: Using ACPI for IRQ routing
[ 0.297024] PCI: pci_cache_line_size set to 64 bytes
[ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
[ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.297209] NetLabel: Initializing
[ 0.297211] NetLabel: domain hash size = 128
[ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.297225] NetLabel: unlabeled traffic allowed by default
[ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299294] Switched to clocksource hpet
[ 0.305097] pnp: PnP ACPI init
[ 0.305113] ACPI: bus type PNP registered
[ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.305256] system 00:00: [io 0xffff] has been reserved
[ 0.305259] system 00:00: [io 0xffff] has been reserved
[ 0.305262] system 00:00: [io 0xffff] has been reserved
[ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
[ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.306696] pnp: PnP ACPI: found 7 devices
[ 0.306698] ACPI: bus type PNP unregistered
[ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.313661] NET: Registered protocol family 2
[ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.314216] TCP: reno registered
[ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314329] NET: Registered protocol family 1
[ 0.314345] pci 0000:00:02.0: Boot video device
[ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314702] PCI: CLS 64 bytes, default 64
[ 0.314746] Unpacking initramfs...
[ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
[ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
[ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.390043] Scanning for low memory corruption every 60 seconds
[ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.392315] zbud: loaded
[ 0.392526] VFS: Disk quotas dquot_6.5.2
[ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392709] msgmni has been set to 15022
[ 0.392776] Key type big_key registered
[ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.393009] io scheduler noop registered
[ 0.393014] io scheduler deadline registered
[ 0.393072] io scheduler cfq registered (default)
[ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393482] intel_idle: MWAIT substates: 0x11142120
[ 0.393484] intel_idle: v0.4 model 0x45
[ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.393772] GHES: HEST is not enabled!
[ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394367] Linux agpgart interface v0.103
[ 0.394421] rtc_cmos 00:01: RTC can wake from S4
[ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.394611] Intel P-state driver initializing.
[ 0.394625] Intel pstate controlling: cpu 0
[ 0.394647] Intel pstate controlling: cpu 1
[ 0.394663] Intel pstate controlling: cpu 2
[ 0.394684] Intel pstate controlling: cpu 3
[ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.395139] TCP: cubic registered
[ 0.395367] NET: Registered protocol family 10
[ 0.395811] NET: Registered protocol family 17
[ 0.396487] registered taskstats version 1
[ 0.397305] Magic number: 2:622:755
[ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
[ 0.397659] PM: Hibernation image not present or could not be loaded.
[ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.399554] Write protecting the kernel read-only data: 8192k
[ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
[ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 0.412549] systemd-udevd[57]: starting version 216
[ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.430313] sdhci: Secure Digital Host Controller Interface driver
[ 0.430315] sdhci: Copyright(c) Pierre Ossman
[ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.441502] ACPI: bus type USB registered
[ 0.441544] usbcore: registered new interface driver usbfs
[ 0.441562] usbcore: registered new interface driver hub
[ 0.441712] usbcore: registered new device driver usb
[ 0.442370] SCSI subsystem initialized
[ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.442897] ehci-pci: EHCI PCI platform driver
[ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
[ 0.444256] libata version 3.00 loaded.
[ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
[ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.456468] hub 1-0:1.0: USB hub found
[ 0.456636] hub 1-0:1.0: 2 ports detected
[ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.457437] hub 2-0:1.0: USB hub found
[ 0.457454] hub 2-0:1.0: 9 ports detected
[ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460861] hub 3-0:1.0: USB hub found
[ 0.460871] hub 3-0:1.0: 4 ports detected
[ 0.461773] ahci 0000:00:1f.2: version 3.0
[ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
[ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.473307] scsi0 : ahci
[ 0.473445] scsi1 : ahci
[ 0.473555] scsi2 : ahci
[ 0.473668] scsi3 : ahci
[ 0.473715] ata1: DUMMY
[ 0.473717] ata2: DUMMY
[ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
[ 0.473721] ata4: DUMMY
[ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
[ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.794069] ata3.00: configured for UDMA/133
[ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
[ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
[ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.799393] sda: sda3 sda4
[ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 0.887143] hub 1-1:1.0: USB hub found
[ 0.887202] hub 1-1:1.0: 8 ports detected
[ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
[ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
[ 0.981520] FS-Cache: Loaded
[ 0.992070] RPC: Registered named UNIX socket transport module.
[ 0.992075] RPC: Registered udp transport module.
[ 0.992077] RPC: Registered tcp transport module.
[ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
[ 1.007058] Netfilter messages via NETLINK v0.30.
[ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
[ 1.023856] vboxdrv: Found 4 processor cores.
[ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
[ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.322293] systemd-udevd[170]: starting version 216
[ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
[ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
[ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
[ 1.576090] [drm] Initialized drm 1.1.0 20060810
[ 1.580291] random: nonblocking pool is initialized
[ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
[ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
[ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.622639] sound hdaudioC0D0: inputs:
[ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
[ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
[ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
[ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
[ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.628924] ACPI: Power Button [PWRB]
[ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 1.630785] ACPI: Lid Switch [LID0]
[ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.631327] ACPI: Power Button [PWRF]
[ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
[ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
[ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
[ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
[ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
[ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
[ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.641000] wmi: Mapper loaded
[ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.644274] AVX2 version of gcm_enc/dec engaged.
[ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.707814] iTCO_vendor_support: vendor-support=0
[ 1.709016] [drm] Memory usable by graphics device = 2048M
[ 1.709022] [drm] Replacing VGA console driver
[ 1.710234] Console: switching to colour dummy device 80x25
[ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
[ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
[ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
[ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
[ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
[ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
[ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.730563] [drm] Driver supports precise vblank timestamp query.
[ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
[ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
[ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
[ 1.756260] [drm] VBT doesn't support DRRS
[ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
[ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
[ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
[ 1.775456] fbcon: inteldrmfb (fb0) is primary device
[ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 1.808667] mousedev: PS/2 mouse device common for all mice
[ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2.394398] Switched to clocksource tsc
[ 2.838140] Console: switching to colour frame buffer device 240x67
[ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845936] i915 0000:00:02.0: registered panic notifier
[ 2.876371] media: Linux media interface: v0.10
[ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.879690] usbcore: registered new interface driver usbhid
[ 2.879694] usbhid: USB HID core driver
[ 2.883145] Linux video capture interface: v2.00
[ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
[ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
[ 2.895830] Bluetooth: Core ver 2.19
[ 2.895849] NET: Registered protocol family 31
[ 2.895852] Bluetooth: HCI device and connection manager initialized
[ 2.895861] Bluetooth: HCI socket layer initialized
[ 2.895864] Bluetooth: L2CAP socket layer initialized
[ 2.895877] Bluetooth: SCO socket layer initialized
[ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
[ 2.901827] usbcore: registered new interface driver uvcvideo
[ 2.901830] USB Video Class driver (1.1.1)
[ 2.910511] usbcore: registered new interface driver btusb
[ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
[ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
[ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 36.061335] wlan0: authenticated
[ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 36.070080] wlan0: associated
[ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
[ 4501.338278] PM: Syncing filesystems ...
[ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.348617] done.
[ 4501.348622] PM: Preparing system for mem sleep
[ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4501.351580] PM: Entering mem sleep
[ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
[ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.361609] cfg80211: Calling CRDA for country: DE
[ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
[ 4501.992409] PM: suspend of devices complete after 640.028 msecs
[ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
[ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
[ 4502.019816] ACPI: Preparing to enter system sleep state S3
[ 4502.020586] PM: Saving platform NVS memory
[ 4502.021109] Disabling non-boot CPUs ...
[ 4502.021139] intel_pstate CPU 1 exiting
[ 4502.022404] kvm: disabling virtualization on CPU1
[ 4502.022854] smpboot: CPU 1 is now offline
[ 4502.023143] intel_pstate CPU 2 exiting
[ 4502.024386] kvm: disabling virtualization on CPU2
[ 4502.125774] smpboot: CPU 2 is now offline
[ 4502.126039] intel_pstate CPU 3 exiting
[ 4502.127395] kvm: disabling virtualization on CPU3
[ 4502.229207] smpboot: CPU 3 is now offline
[ 4502.232189] ACPI: Low-level resume complete
[ 4502.232259] PM: Restoring platform NVS memory
[ 4502.232774] Enabling non-boot CPUs ...
[ 4502.232814] x86: Booting SMP configuration:
[ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4502.245238] kvm: enabling virtualization on CPU1
[ 4502.247462] Intel pstate controlling: cpu 1
[ 4502.247514] CPU1 is up
[ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4502.259870] kvm: enabling virtualization on CPU2
[ 4502.262107] Intel pstate controlling: cpu 2
[ 4502.262155] CPU2 is up
[ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4502.274504] kvm: enabling virtualization on CPU3
[ 4502.276760] Intel pstate controlling: cpu 3
[ 4502.276807] CPU3 is up
[ 4502.282141] ACPI: Waking up from system sleep state S3
[ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
[ 4502.303102] PM: early resume of devices complete after 0.384 msecs
[ 4502.303194] usb usb2: root hub lost power or was reset
[ 4502.303197] usb usb3: root hub lost power or was reset
[ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 4502.329054] sd 2:0:0:0: [sda] Starting disk
[ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4502.652119] ata3.00: configured for UDMA/133
[ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
[ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
[ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
[ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
[ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
[ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
[ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
[ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
[ 4503.274732] PM: resume of devices complete after 970.836 msecs
[ 4503.275664] PM: Finishing wakeup.
[ 4503.275668] Restarting tasks ...
[ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276362] usb 2-5: USB disconnect, device number 3
[ 4503.276546] pci_bus 0000:01: Allocating resources
[ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 4503.276596] done.
[ 4503.276614] pci_bus 0000:02: Allocating resources
[ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.276778] pci 0000:00:00.0: using default PCI settings
[ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.276795] i915 0000:00:02.0: using default PCI settings
[ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
[ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
[ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.276980] pci 0000:00:1f.3: using default PCI settings
[ 4503.277590] pci_bus 0000:01: Allocating resources
[ 4503.277619] pci_bus 0000:02: Allocating resources
[ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.277673] pci 0000:00:00.0: using default PCI settings
[ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.277690] i915 0000:00:02.0: using default PCI settings
[ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
[ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
[ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.277875] pci 0000:00:1f.3: using default PCI settings
[ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
[ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
[ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4506.058296] dell_wmi: Unknown key e00e pressed
[ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
[ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 4507.053766] wlan0: authenticated
[ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 4507.065241] wlan0: associated
[ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
[ 4813.124097] hub 2-2:1.0: USB hub found
[ 4813.124371] hub 2-2:1.0: 4 ports detected
[ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
[ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
[ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
[ 4813.515300] usbcore: registered new interface driver snd-usb-audio
[ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
[ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
[ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
[ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
[ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
[ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
[ 4814.121931] usbcore: registered new interface driver ax88179_178a
[ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
[ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6509.605763] usb 2-2: USB disconnect, device number 6
[ 6509.605773] usb 2-2.2: USB disconnect, device number 7
[ 6509.660447] usb 2-2.3: USB disconnect, device number 8
[ 6509.692281] usb 2-2.4: USB disconnect, device number 9
[ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
[ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
[ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6511.071805] PM: Syncing filesystems ...
[ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.087129] done.
[ 6511.087139] PM: Preparing system for mem sleep
[ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6511.090294] PM: Entering mem sleep
[ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
[ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
[ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
[ 6511.720807] PM: suspend of devices complete after 629.628 msecs
[ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
[ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
[ 6511.748271] ACPI: Preparing to enter system sleep state S3
[ 6511.749033] PM: Saving platform NVS memory
[ 6511.749584] Disabling non-boot CPUs ...
[ 6511.749628] intel_pstate CPU 1 exiting
[ 6511.751130] kvm: disabling virtualization on CPU1
[ 6511.752157] smpboot: CPU 1 is now offline
[ 6511.752650] intel_pstate CPU 2 exiting
[ 6511.754091] kvm: disabling virtualization on CPU2
[ 6511.754112] smpboot: CPU 2 is now offline
[ 6511.755147] intel_pstate CPU 3 exiting
[ 6511.756491] kvm: disabling virtualization on CPU3
[ 6511.857520] smpboot: CPU 3 is now offline
[ 6511.860099] ACPI: Low-level resume complete
[ 6511.860168] PM: Restoring platform NVS memory
[ 6511.860682] Enabling non-boot CPUs ...
[ 6511.860725] x86: Booting SMP configuration:
[ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6511.873161] kvm: enabling virtualization on CPU1
[ 6511.875384] Intel pstate controlling: cpu 1
[ 6511.875441] CPU1 is up
[ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6511.887813] kvm: enabling virtualization on CPU2
[ 6511.890055] Intel pstate controlling: cpu 2
[ 6511.890104] CPU2 is up
[ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6511.902450] kvm: enabling virtualization on CPU3
[ 6511.904715] Intel pstate controlling: cpu 3
[ 6511.904763] CPU3 is up
[ 6511.910077] ACPI: Waking up from system sleep state S3
[ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
[ 6511.931215] PM: early resume of devices complete after 0.474 msecs
[ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 6511.931308] usb usb2: root hub lost power or was reset
[ 6511.931310] usb usb3: root hub lost power or was reset
[ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 6512.030458] sd 2:0:0:0: [sda] Starting disk
[ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6512.353607] ata3.0Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...) -
Linux 3.12 and streaming media on a Dell XPS 13: kernel panic
Hi all,
Shortly after upgrading from Linux 3.11.6 to 3.12, I started getting kernel panics while playing streaming media (in particular from Youtube and The Daily Show). Here is a camera shot. The crash would not take place immediatly, but perhaps after 15 minutes of streaming. After downgrading to Linux 3.11.6 everything works fine. Therefore, it is clear to me that the issue is related to the Linux 3.12 kernel, but this is all I know.
The fifth-to-last line from the camera shot reads:
[11438.332699] RIP [<ffffffff8129e160>] __sg_page_iter_start+0x20/0x20
A quick Google search reveals that __sg_page_iter_start is a function inside the scatterlist.h library in the Linux kernel, which apparently deals with memory paging, but my knowledge about this stuff is so poor that the message is almost meaningless. I would greatly appreciate if someone could give me a hint about this.
I did not find anything useful in the journal, but here are the last few journal lines for 2 different crash instances:
Crash #1
Nov 15 00:22:45 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:15 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:22 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:24 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:24:26 xps gnome-session[385]: Starting FCEUX 2.2.2...
Nov 15 00:24:26 xps gnome-session[385]: Loading /home/vrg/MyFiles/roms/nes/CASTLEVA.NES...
Nov 15 00:24:26 xps gnome-session[385]: PRG ROM: 8 x 16KiB
Nov 15 00:24:26 xps gnome-session[385]: CHR ROM: 0 x 8KiB
Nov 15 00:24:26 xps gnome-session[385]: ROM CRC32: 0xb668c7fc
Nov 15 00:24:26 xps gnome-session[385]: ROM MD5: 0x728e05f245ab8b7fe61083f6919dc485
Nov 15 00:24:26 xps gnome-session[385]: Mapper #: 2
Nov 15 00:24:26 xps gnome-session[385]: Mapper name: UNROM
Nov 15 00:24:26 xps gnome-session[385]: Mirroring: Vertical
Nov 15 00:24:26 xps gnome-session[385]: Battery-backed: No
Nov 15 00:24:26 xps gnome-session[385]: Trained: No
Nov 15 00:24:26 xps gnome-session[385]: Power on
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 256 x 224 x 32 bpp
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 1920 x 1080 x 32 bpp full screen
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 126.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 158.7%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 200.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 252.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 200.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 158.7%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 126.0%
Nov 15 00:24:26 xps gnome-session[385]: Emulation speed 100.0%
Nov 15 00:24:26 xps gnome-session[385]: Initializing video... Video Mode: 256 x 224 x 32 bpp
Nov 15 00:24:27 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:26:02 xps kernel: perf samples too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
Nov 15 00:27:43 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:28:44 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:30:55 xps gnome-session[385]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Nov 15 00:31:25 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:31:31 xps gnome-session[385]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 15 00:31:32 xps gnome-session[385]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Crash #2
Nov 17 14:35:41 xps dbus-daemon[279]: dbus[279]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Nov 17 14:35:41 xps dbus[279]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Nov 17 14:35:41 xps dbus[279]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Nov 17 14:35:41 xps dbus-daemon[279]: dbus[279]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Nov 17 16:15:31 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:39 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:50 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:15:50 xps gnome-session[351]: !!! [YouTubeInfoService: setting loadContext]: TypeError: channel is undefined
Nov 17 16:16:03 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:24:09 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:29:40 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:37:00 xps gnome-session[351]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 17 16:41:42 xps gnome-session[351]: NOTE: child process received `Goodbye', closing down
In the first journal log, the following line calls my attention:
Nov 15 00:26:02 xps kernel: perf samples too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
However, this seems to be a normal occurrence after playing games (https://bbs.archlinux.org/viewtopic.php?id=170471), so I would guess this is not related to the kernel panic.
For reference, here are some hardware specifications of my Dell XPS 13:
# lsmod
Module Size Used by
usb_storage 47847 1
fuse 74829 3
uvcvideo 72804 0
videobuf2_vmalloc 3272 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 27797 1 uvcvideo
videodev 110188 2 uvcvideo,videobuf2_core
media 11591 2 uvcvideo,videodev
hid_generic 1153 0
usbhid 41434 0
hid 89751 2 hid_generic,usbhid
joydev 9663 0
dell_wmi 1485 0
sparse_keymap 3114 1 dell_wmi
ax88179_178a 12500 0
usbnet 26083 1 ax88179_178a
mii 4027 2 usbnet,ax88179_178a
x86_pkg_temp_thermal 6959 0
intel_powerclamp 8642 0
coretemp 6326 0
kvm_intel 129457 0
kvm 379351 1 kvm_intel
crc32_pclmul 2987 0
crc32c_intel 14249 0
ghash_clmulni_intel 4469 0
cryptd 8473 1 ghash_clmulni_intel
nls_cp437 5953 2
iTCO_wdt 5407 0
vfat 10055 2
fat 51827 1 vfat
iTCO_vendor_support 1929 1 iTCO_wdt
dell_laptop 8851 0
dcdbas 6455 1 dell_laptop
arc4 2000 2
iwldvm 172354 0
mac80211 454008 1 iwldvm
microcode 15024 0
psmouse 85356 0
snd_hda_codec_hdmi 30233 1
evdev 10693 15
serio_raw 5041 0
pcspkr 2027 0
i2c_i801 11269 0
iwlwifi 137049 1 iwldvm
snd_hda_codec_realtek 37276 1
cfg80211 403337 3 iwlwifi,mac80211,iwldvm
i915 611138 3
wmi 8347 1 dell_wmi
rfkill 15698 3 cfg80211
thermal 8620 0
snd_hda_intel 36520 3
intel_agp 10872 1 i915
snd_hda_codec 148129 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
intel_gtt 12664 2 i915,intel_agp
drm_kms_helper 35854 1 i915
snd_hwdep 6332 1 snd_hda_codec
tpm_tis 10921 0
tpm 15091 1 tpm_tis
snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
tpm_bios 9745 1 tpm
drm 236060 4 i915,drm_kms_helper
snd_page_alloc 7202 2 snd_pcm,snd_hda_intel
shpchp 25457 0
snd_timer 18718 1 snd_pcm
i2c_algo_bit 5391 1 i915
snd 59141 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
i2c_core 23720 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
soundcore 5450 1 snd
mei_me 9296 0
battery 6925 0
mei 62003 1 mei_me
video 11380 1 i915
mperf 1235 0
lpc_ich 13112 0
ac 3324 0
processor 25077 0
button 4669 1 i915
vboxdrv 263994 0
ext4 470284 3
crc16 1359 1 ext4
mbcache 5866 1 ext4
jbd2 83376 1 ext4
sd_mod 30739 8
ahci 22888 5
libahci 21393 1 ahci
ehci_pci 4120 0
libata 171318 2 ahci,libahci
ehci_hcd 48052 1 ehci_pci
xhci_hcd 91357 0
scsi_mod 128695 3 usb_storage,libata,sd_mod
usbcore 178087 8 uvcvideo,usb_storage,ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd
usb_common 1648 1 usbcore
# lshw
xps
description: Portable Computer
product: Dell System XPS L322X (System SKUNumber)
vendor: Dell Inc.
version: 0.1
serial: 2H0CVW1
width: 64 bits
capabilities: smbios-2.7 dmi-2.7 vsyscall32
configuration: administrator_password=unknown boot=normal chassis=portable family=ChiefRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-4800-1030-8043-B2C04F565731
*-core
description: Motherboard
product: 0PJHXN
vendor: Dell Inc.
physical id: 0
version: A00
serial: .2H0CVW1.CN4864332G0061.
slot: Part Component
*-cpu
description: CPU
product: Core i7 (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz
serial: To Be Filled By O.E.M.
slot: CPU Socket - U3E1
size: 2500MHz
capacity: 3100MHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq
configuration: cores=2 enabledcores=2 threads=4
*-cache:0
description: L1 cache
physical id: 6
slot: L1-Cache
size: 32KiB
capacity: 32KiB
capabilities: internal write-through instruction
*-cache:1
description: L2 cache
physical id: 7
slot: L2-Cache
size: 256KiB
capacity: 256KiB
capabilities: internal write-through unified
*-cache:2
description: L3 cache
physical id: 8
slot: L3-Cache
size: 4MiB
capacity: 4MiB
capabilities: internal write-back unified
*-cache
description: L1 cache
physical id: 5
slot: L1-Cache
size: 32KiB
capacity: 32KiB
capabilities: internal write-through data
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: A06
date: 12/03/2012
size: 128KiB
capacity: 6592KiB
capabilities: pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot
*-memory
description: System Memory
physical id: 35
slot: System board or motherboard
size: 8GiB
*-bank:0
description: DIMM DDR3 Synchronous 1600 MHz (0.6 ns)
product: HT5SMRAP
vendor: Hynix/Hyundai
physical id: 0
serial: 00000000
slot: ChannelA-DIMM0
size: 4GiB
width: 64 bits
clock: 1600MHz (0.6ns)
*-bank:1
description: DIMM DDR3 Synchronous 1600 MHz (0.6 ns)
product: HT5SMRAP
vendor: Hynix/Hyundai
physical id: 1
serial: 00000000
slot: ChannelB-DIMM0
size: 4GiB
width: 64 bits
clock: 1600MHz (0.6ns)
*-pci
description: Host bridge
product: 3rd Gen Core processor DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 09
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: 3rd Gen Core processor Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:2000(size=64)
*-usb:0
description: USB controller
product: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:40 memory:d0500000-d050ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 3.11.6-1-ARCH xhci_hcd
physical id: 0
bus info: usb@2
logical name: usb2
version: 3.11
capabilities: usb-3.00
configuration: driver=hub slots=4 speed=5000Mbit/s
*-usb
description: Ethernet interface
product: AX88179
vendor: ASIX Elec. Corp.
physical id: 2
bus info: usb@2:2
logical name: enp0s20u2
version: 1.00
serial: 0000249B0982FA
size: 100Mbit/s
capacity: 1Gbit/s
capabilities: usb-3.00 ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=ax88179_178a duplex=full ip=128.103.14.222 link=yes maxpower=496mA multicast=yes port=MII speed=100Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 3.11.6-1-ARCH xhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: USB hub
product: USB2.0 Hub
vendor: Genesys Logic, Inc.
physical id: 1
bus info: usb@1:1
version: 32.98
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
description: Mouse
product: USB OPTICAL MOUSE
vendor: PIXART
physical id: 1
bus info: usb@1:1.1
version: 1.00
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:1
description: Mass storage device
product: Android Phone
vendor: HTC
physical id: 2
bus info: usb@1:1.2
version: 2.26
serial: HT08DHL10581
capabilities: usb-2.00 scsi
configuration: driver=usb-storage maxpower=500mA speed=480Mbit/s
*-communication
description: Communication controller
product: 7 Series/C210 Series Chipset Family MEI Controller #1
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
resources: irq:42 memory:d0515000-d051500f
*-usb:1
description: USB controller
product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:16 memory:d051a000-d051a3ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.11.6-1-ARCH ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@3:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Video
product: Laptop_Integrated_Webcam_1.3M
vendor: 00248CE62D1E-CC18-000603
physical id: 5
bus info: usb@3:1.5
version: 27.09
capabilities: usb-2.00
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-multimedia
description: Audio device
product: 7 Series/C210 Series Chipset Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:43 memory:d0510000-d0513fff
*-pci
description: PCI bridge
product: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: c4
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 memory:d0400000-d04fffff
*-network DISABLED
description: Wireless interface
product: Centrino Advanced-N 6235
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlp1s0
version: 24
serial: c8:f7:33:83:71:1f
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.11.6-1-ARCH firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
resources: irq:44 memory:d0400000-d0401fff
*-usb:2
description: USB controller
product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:d0519000-d05193ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.11.6-1-ARCH ehci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 3.11
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@4:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-isa
description: ISA bridge
product: QS77 Express Chipset LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 04
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:41 ioport:2098(size=8) ioport:20bc(size=4) ioport:2090(size=8) ioport:20b8(size=4) ioport:2060(size=32) memory:d0518000-d05187ff
*-serial UNCLAIMED
description: SMBus
product: 7 Series/C210 Series Chipset Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 04
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:d0514000-d05140ff ioport:efa0(size=32)
*-battery
product: DELL
vendor: Dynapack
physical id: 1
version: 2008
serial: 1.0
slot: Rear
capacity: 46620mWh
configuration: voltage=7.4V
*-scsi
physical id: 2
bus info: scsi@6
logical name: scsi6
capabilities: scsi-host
configuration: driver=usb-storagePosted to [email protected], I hope I just haven't dawdled for too long and this can make it to 3.13 final.
Hopefully this should be sufficient information, I've linked to this thread too. I've also mentioned I'm willing to beam one at someone from Amazon, with 2-day shipping to the USA the Pluggable branded adapter is just under NZD$40, which I can easily live with.
===========================================================================================================
USB3 gigabit ethernet adapters with the ASIX AX88179 chipset (LevelOne USB0401-V3, Plugable USB3-E1000, SIIG JU-NE0211-S1 and others) are experiencing kernel panics in usb_hcd_map_urb_for_dma since 3.12. The issue does not seem to directly correlate with low or high network activity, occurring seemingly at random. Some panics occurred less than 5 minutes from boot and tens of megabytes of network transfer, while on other occasions it would be stable for multiple days with tens to hundreds of gigabytes of line-rate throughput and several sleep/resume cycles.
Both my Sony Vaio Pro 13 and another user reporting this issue on the Arch forums [1] are Intel-based, my USB controller is an 8086:9c31 (Lynx Point LP), the other is reported as a C210/7 series (unknown PID). A third with a Haswell Dell XPS has attempted my workaround and reports similar success.
I have a mediocre quality photo of my laptop's screen from one of these panics [2], the call trace - which is similar but not identical between my machine and that of the other user reporting the issue - is as follows:
usb_hcd_map_urb_for_dma
usb_hcd_submit_urb
local_bh_enable_ip
selinux_parse_skb
usb_alloc_urb
__kmalloc
usbnet_start_xmit
usbnet_start_xmit
dev_hard_start_xmit
sch_direct_xmit
dev_queue_xmit
ip_finish_output2
ip_finish_output
ip_output
dst_output
ip_local_out
ip_queue_xmit
tcp_transmit_skb
tcp_write_xmit
__tcp_push_pending_frames
tcp_push
tcp_sendmsg
inet_sendmsg
__sock_sendmsg_nosec
sock_sendmsg
set_restore_sigmask
set_restore_sigmask
fget_light
SYSC_sendto
set_restore_sigmask
SyS_sendto
system_call_fastpath
So far as I can tell, the driver is unaffected as late as 3.11.6, but problematic as of 3.12 (and still affected in 3.13-rc5). The history of drivers/net/usb/ax88179_178a.c for this time period yields this patch, which at least in my somewhat limited understanding appeared a likely candidate. I've reverted this on my system - against several linux-next builds from the last 3-4 weeks - and have had no issues with this network controller since.
commit 3804fad45411b48233b48003e33a78f290d227c8
Author: Ming Lei <[email protected]>
Date: Thu Aug 8 21:48:25 2013 +0800
USBNET: ax88179_178a: enable tso if usb host supports sg dma
This patch enables 'can_dma_sg' flag for ax88179_178a device
if the attached host controller supports building packet from
discontinuous buffers(DMA SG is possible), so TSO can be enabled
and skb fragment buffers can be passed to usb stack via urb->sg
directly.
With the patch, system CPU utilization decreased ~50% and throughput
increased by ~10% when doing iperf client test on one ARM A15 dual
core board.
Cc: Ben Hutchings <[email protected]>
Cc: Grant Grundler <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Freddy Xin <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Unfortunately I have not retained the built kernel from a broken 3.12 build, so the system information below reflects the patched linux-next kernel I am running currently.
I understand this may be a somewhat obscure piece of hardware, I am willing to assist by drop-shipping one to someone from Amazon (or local country equivalent if the price is not extortionate) should it be required.
System information:
ver_linux:
Linux neko 3.13.0-rc5-next-20131224+ #1 SMP Sat Dec 28 19:09:27 NZDT 2013 x86_64 Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz GenuineIntel GNU/Linux
Gnu C 4.7.3
Gnu make 4.0
binutils 2.24
util-linux scripts/ver_linux: line 23: fdformat: command not found
mount assert
module-init-tools 16
e2fsprogs 1.42.9
jfsutils 1.1.15
reiserfsprogs 3.6.24
reiser4progs 1.0.7
xfsprogs 3.1.11
quota-tools 4.01.
PPP 2.4.5
Linux C Library 2.17
Dynamic linker (ldd) 2.17
Procps 3.3.9
Net-tools 1.60_p20130513023548
Kbd 2.0.1
Sh-utils 8.22
Modules Loaded bonding rndis_host cdc_ether tun snd_usb_audio snd_usbmidi_lib snd_rawmidi cdc_acm ctr ccm hidp nfsd rfcomm bnep iptable_nat nf_nat_ipv4 nf_nat uvcvideo btusb bluetooth hid_multitouch videobuf2_vmalloc videobuf2_memops videobuf2_core uinput ax88179_178a usbnet mii rtsx_pci_sdmmc rtsx_pci mmc_core fuse snd_hda_codec_realtek iwlmvm kvm_intel snd_hda_codec_generic mac80211 kvm pn544_mei mei_phy iwlwifi pn544 snd_hda_intel hci nfc snd_hda_codec snd_hwdep cfg80211 xhci_hcd
/proc/cpuinfo:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 69
model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz
stepping : 1
microcode : 0x10
cpu MHz : 2968.125
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips : 4788.92
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
PCI:
-[0000:00]-+-00.0 Intel Corporation Haswell-ULT DRAM Controller [8086:0a04]
+-02.0 Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16]
+-03.0 Intel Corporation Device [8086:0a0c]
+-14.0 Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31]
+-16.0 Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a]
+-1b.0 Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20]
+-1c.0-[01]----00.0 Intel Corporation Wireless 7260 [8086:08b1]
+-1c.3-[02]--
+-1c.4-[03]----00.0 Samsung Electronics Co Ltd Device [144d:a800]
+-1d.0 Intel Corporation Lynx Point-LP USB EHCI #1 [8086:9c26]
+-1f.0 Intel Corporation Lynx Point-LP LPC Controller [8086:9c43]
\-1f.3 Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22]
USB:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 025: ID 0b95:1790 ASIX Electronics Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 027: ID 8087:07dc Intel Corp.
Bus 002 Device 003: ID 04f2:b3be Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 0eef:a108 D-WAV Scientific Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/proc/modules:
bonding 84837 0 - Live 0xffffffffc00d5000
rndis_host 5162 0 - Live 0xffffffffc0096000
cdc_ether 4324 1 rndis_host, Live 0xffffffffc006e000
tun 16811 0 - Live 0xffffffffc009e000
snd_usb_audio 102474 0 - Live 0xffffffffc007b000
snd_usbmidi_lib 16542 1 snd_usb_audio, Live 0xffffffffc0072000
snd_rawmidi 15891 1 snd_usbmidi_lib, Live 0xffffffffc0017000
cdc_acm 16166 0 - Live 0xffffffffc05ec000
ctr 3471 2 - Live 0xffffffffc05e8000
ccm 6977 2 - Live 0xffffffffc05e3000
hidp 12989 0 - Live 0xffffffffc05db000
nfsd 192979 13 - Live 0xffffffffc059b000
rfcomm 27704 12 - Live 0xffffffffc058e000
bnep 9055 2 - Live 0xffffffffc0587000
iptable_nat 2550 0 - Live 0xffffffffc0583000
nf_nat_ipv4 3118 1 iptable_nat, Live 0xffffffffc057f000
nf_nat 9984 2 iptable_nat,nf_nat_ipv4, Live 0xffffffffc0577000
uvcvideo 60542 0 - Live 0xffffffffc0562000
btusb 14182 0 - Live 0xffffffffc0519000
bluetooth 200149 23 hidp,rfcomm,bnep,btusb, Live 0xffffffffc04d8000
hid_multitouch 8791 0 - Live 0xffffffffc04d1000
videobuf2_vmalloc 2528 1 uvcvideo, Live 0xffffffffc04cd000
videobuf2_memops 1559 1 videobuf2_vmalloc, Live 0xffffffffc04c9000
videobuf2_core 22473 1 uvcvideo, Live 0xffffffffc04be000
uinput 6657 0 - Live 0xffffffffc04b9000
ax88179_178a 11352 0 - Live 0xffffffffc04b2000
usbnet 17066 3 rndis_host,cdc_ether,ax88179_178a, Live 0xffffffffc04a7000
mii 3427 2 ax88179_178a,usbnet, Live 0xffffffffc04a3000
rtsx_pci_sdmmc 8434 0 - Live 0xffffffffc049d000
rtsx_pci 24242 1 rtsx_pci_sdmmc, Live 0xffffffffc0490000
mmc_core 73734 1 rtsx_pci_sdmmc, Live 0xffffffffc0471000
fuse 65180 0 - Live 0xffffffffc0458000
snd_hda_codec_realtek 37786 1 - Live 0xffffffffc0448000
iwlmvm 99382 0 - Live 0xffffffffc03d9000
kvm_intel 119916 0 - Live 0xffffffffc033e000
snd_hda_codec_generic 39626 1 snd_hda_codec_realtek, Live 0xffffffffc032d000
mac80211 352537 1 iwlmvm, Live 0xffffffffc0239000
kvm 332678 1 kvm_intel, Live 0xffffffffc014f000
pn544_mei 1507 0 - Live 0xffffffffc014b000
mei_phy 1942 1 pn544_mei, Live 0xffffffffc0147000
iwlwifi 70257 1 iwlmvm, Live 0xffffffffc0129000
pn544 6215 1 pn544_mei, Live 0xffffffffc0124000
snd_hda_intel 29721 2 - Live 0xffffffffc0106000
hci 13343 2 mei_phy,pn544, Live 0xffffffffc00fd000
nfc 46459 2 pn544,hci, Live 0xffffffffc00c8000
snd_hda_codec 72588 3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel, Live 0xffffffffc00a7000
snd_hwdep 5373 2 snd_usb_audio,snd_hda_codec, Live 0xffffffffc009b000
cfg80211 320801 3 iwlmvm,mac80211,iwlwifi, Live 0xffffffffc001e000
xhci_hcd 88348 0 - Live 0xffffffffc0000000
/proc/iomem:
00000000-00000fff : reserved
00001000-00057fff : System RAM
00058000-00058fff : reserved
00059000-0009dfff : System RAM
0009e000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-ca4b7fff : System RAM
06000000-066753ba : Kernel code
066753bb-06cc83ff : Kernel data
06dc9000-06ecffff : Kernel bss
ca4b8000-ca4befff : ACPI Non-volatile Storage
ca4bf000-ca8e7fff : System RAM
ca8e8000-cac39fff : reserved
cac3a000-da89bfff : System RAM
da89c000-dab3ffff : reserved
dab40000-dab55fff : ACPI Tables
dab56000-dbaaafff : ACPI Non-volatile Storage
dbaab000-dbffefff : reserved
dbfff000-dbffffff : System RAM
dd000000-df1fffff : reserved
dd200000-df1fffff : Graphics Stolen Memory
df200000-feafffff : PCI Bus 0000:00
df200000-df3fffff : PCI Bus 0000:01
e0000000-efffffff : 0000:00:02.0
e0000000-e07e8fff : BOOTFB
f0000000-f09fffff : PCI Bus 0000:03
f0a00000-f13fffff : PCI Bus 0000:02
f6400000-f67fffff : 0000:00:02.0
f6800000-f71fffff : PCI Bus 0000:03
f6800000-f680ffff : 0000:03:00.0
f6810000-f6811fff : 0000:03:00.0
f6810000-f6811fff : ahci
f7200000-f7bfffff : PCI Bus 0000:02
f7c00000-f7cfffff : PCI Bus 0000:01
f7c00000-f7c01fff : 0000:01:00.0
f7c00000-f7c01fff : iwlwifi
f7d00000-f7d0ffff : 0000:00:14.0
f7d00000-f7d0ffff : xhci_hcd
f7d10000-f7d13fff : 0000:00:1b.0
f7d10000-f7d13fff : ICH HD audio
f7d14000-f7d17fff : 0000:00:03.0
f7d19000-f7d190ff : 0000:00:1f.3
f7d1a000-f7d1a3ff : 0000:00:1d.0
f7d1a000-f7d1a3ff : ehci_hcd
f7d1c000-f7d1c01f : 0000:00:16.0
f7d1c000-f7d1c01f : mei_me
f7fef000-f7feffff : pnp 00:0a
f7ff0000-f7ffffff : pnp 00:0a
f8000000-fbffffff : PCI MMCONFIG 0000 [bus 00-3f]
f8000000-fbffffff : reserved
f8000000-fbffffff : pnp 00:0a
fec00000-fec00fff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed03fff : reserved
fed00000-fed003ff : HPET 0
fed10000-fed17fff : pnp 00:0a
fed18000-fed18fff : pnp 00:0a
fed19000-fed19fff : pnp 00:0a
fed1c000-fed1ffff : reserved
fed1c000-fed1ffff : pnp 00:0a
fed1f410-fed1f414 : iTCO_wdt
fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:0a
fed45000-fed8ffff : pnp 00:0a
fed90000-fed93fff : pnp 00:0a
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ff000000-ffffffff : reserved
ff000000-ffffffff : pnp 00:0a
100000000-21fdfffff : System RAM
21fe00000-21fffffff : RAM buffer
/proc/ioports:
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
04d0-04d1 : pnp 00:07
0680-069f : pnp 00:04
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
164e-164f : pnp 00:04
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1810-1815 : ACPI CPU throttle
1830-1833 : iTCO_wdt
1830-1833 : iTCO_wdt
1850-1850 : ACPI PM2_CNT_BLK
1854-1857 : pnp 00:06
1860-187f : iTCO_wdt
1860-187f : iTCO_wdt
1880-189f : ACPI GPE0_BLK
1c00-1cfe : pnp 00:04
1d00-1dfe : pnp 00:04
1e00-1efe : pnp 00:04
1f00-1ffe : pnp 00:04
2008-200b : pnp 00:04
3000-3fff : PCI Bus 0000:01
d000-dfff : PCI Bus 0000:03
e000-efff : PCI Bus 0000:02
f000-f03f : 0000:00:02.0
f040-f05f : 0000:00:1f.3
ffff-ffff : pnp 00:04
ffff-ffff : pnp 00:04
Regards,
Thomas -
Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100
I am curretly running CS6 on my dell xps 9100
Windows 7 64bit
12GB Ram
2TB HD + 0 Rate 2TB External Drive (x2)
Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
Memory and Storage
The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
Video
ATI Radeon HD5870 with 1024 megabytes of RAM
Expansion and Networking
The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
PCI Express x1 card slot (PCIE1X3)
PCI Express x16 card slot (PCIE16_1)
PCI Express x1 card slot (PCIE1X2)
PCI Express x1 card slot (PCIE1X1)
PCI Express x8 card slot (PCIE8_2)
Chassis and Power
The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
GeForce GTX 285 (Windows and Mac OS)
GeForce GTX 470 (Windows)
GeForce GTX 570 (Windows)
GeForce GTX 580 (Windows)
NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
Quadro FX 3700M (Windows)
Quadro FX 3800 (Windows)
Quadro FX 3800M (Windows)
Quadro FX 4800 (Windows and Mac OS)
Quadro FX 5800 (Windows)
Quadro 2000 (Windows)
Quadro 2000D (Windows)
Quadro 2000M (Windows)
Quadro 3000M (Windows)
Quadro 4000 (Windows and Mac OS)
Quadro 4000M (Windows)
Quadro 5000 (Windows)
Quadro 5000M (Windows)
Quadro 5010M (Windows)
Quadro 6000 (Windows)
Quadro CX (Windows)
Tesla C2075** (Windows)Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference
-
[semi-solved] dell xps 12 touchscreen not working (2013, 12-9Q33)
does anyone know how to get the touch screen working the dell xps 12?
ran windows on it for a few days and there did not appear to be any hardware issues with touchscreen (or anything else).
deleted all windows partitions and installed arch + kde with no issues, boots and runs great. but no response from the touch screen.
have tried to cat every /dev/input/event* but get nothing when tapping touch screen.
beleve it uses an atmel maxtouch digitizer... which i think should be picked up by udev... but dont think udev even sees the device, it just detetcs boring old mouse.
this looks like a simmilar issue with ubuntu https://bugs.launchpad.net/ubuntu/+sour … ug/1218973 but on my system there is no indication that it is an i2c device.
tried atmel kernel but still no action https://git.kernel.org/cgit/linux/kerne … mel-mxt-ts
lsusb
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:09fa Intel Corp.
Bus 001 Device 003: ID 0bda:5716 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 8087:07dc Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
input
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Integrated Webcam id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=10 [slave keyboard (3)]
↳ Dell WMI hotkeys id=12 [slave keyboard (3)]
sudo cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0001 Vendor=10ec Product=0668 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card1/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card1/input5
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input7
U: Uniq=
H: Handlers=kbd rfkill event7
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0003 Vendor=0bda Product=5716 Version=3204
N: Name="Integrated Webcam"
P: Phys=usb-0000:00:14.0-5/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input8
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input9
U: Uniq=
H: Handlers=mouse0 event9
B: PROP=5
B: EV=b
B: KEY=e520 610000 0 0 0 0
B: ABS=660800011000003
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input12
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input13
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=140
sudo dmidecode
[sudo] password for gamera:
# dmidecode 2.12
# SMBIOS entry point at 0x000f04c0
SMBIOS 2.7 present.
56 structures occupying 2720 bytes.
Table at 0x000EBA70.
Handle 0xDA00, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 00 DA B2 00 0D 5F 0F 37 40 7D 00 00 00 00
00 7E 00 01 00 00 00 75 01 01 80 01 00 76 01 02
80 01 00 4F 02 05 80 01 00 50 02 06 80 00 00 A5
02 02 00 00 00 A6 02 02 00 01 00 9C 00 03 00 01
00 9B 00 03 00 00 00 8A 01 04 00 01 00 89 01 04
00 00 00 7F 01 05 00 00 00 80 01 05 00 01 00 53
01 06 00 00 00 52 01 06 00 01 00 7B 01 07 00 00
00 7C 01 07 00 01 00 94 01 08 00 00 00 93 01 08
00 01 00 7D 00 09 00 00 00 2D 00 0A 00 01 00 2E
00 0A 00 00 00 6E 00 0B 00 00 00 95 00 0C 00 01
00 96 00 0C 00 00 00 2F 02 0D 00 01 00 30 02 0D
00 00 00 50 02 0E 00 00 00 51 02 0E 00 01 00 52
02 0E 00 02 00 53 02 0E 00 03 00 54 02 0E 00 04
00 56 02 0E 00 05 00 F0 00 5D 80 01 00 ED 00 5E
80 01 00 4B 01 5F 80 01 00 4A 01 60 80 01 00 EA
00 0F 00 01 00 FF FF 00 00 00 00
Handle 0xDA01, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 01 DA B2 00 0D 5F 0F 37 40 EB 00 0F 00 00
00 37 01 61 80 01 00 38 01 62 80 01 00 39 01 63
80 01 00 3D 03 66 80 01 00 3E 03 67 80 01 00 2E
02 07 80 01 00 2D 02 08 80 01 00 4F 03 09 80 01
00 50 03 0A 80 01 00 0E 01 64 80 01 00 0F 01 65
80 01 00 47 01 68 80 01 00 46 01 69 80 01 00 36
02 17 80 01 00 35 02 18 80 01 00 36 03 19 80 01
00 37 03 1A 80 01 00 3A 03 1B 80 01 00 3B 03 1C
80 01 00 41 03 1D 80 01 00 42 03 1E 80 01 00 43
03 1F 80 01 00 44 03 20 80 01 00 45 03 21 80 01
00 46 03 22 80 01 00 47 03 23 80 01 00 4B 03 24
80 01 00 4C 03 25 80 01 00 4A 02 0B 80 01 00 26
03 0C 80 01 00 5B 03 0D 80 01 00 5C 03 0E 80 01
00 5D 03 0F 80 01 00 5E 03 10 80 01 00 5F 03 11
80 01 00 60 03 12 80 01 00 0C 80 13 80 01 00 04
A0 14 80 01 00 FF FF 00 00 00 00
Handle 0xDA02, DMI type 218, 29 bytes
OEM-specific Type
Header and Data:
DA 1D 02 DA B2 00 0D 5F 0F 37 40 44 01 15 80 01
00 45 01 16 80 01 00 FF FF 00 00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A02
Release Date: 07/26/2013
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
MCA is supported
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 0.2
Firmware Revision: 0.2
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: XPS 12-9Q33
Version: A02
Serial Number: FZS4SY1
UUID: 4C4C4544-005A-5310-8034-C6C04F535931
Wake-up Type: Power Switch
SKU Number: XPS 12-9Q33
Family:
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: XPS 12-9Q33
Version: A02
Serial Number: .FZS4SY1.CN1296139P0049.
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Portable
Lock: Not Present
Version: Not Specified
Serial Number: FZS4SY1
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: To be filled by O.E.M.
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: TV Out
External Connector Type: Mini Centronics Type-14
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2A
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9C1 - PCIE DOCKING CONN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2B3 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C2 - EXT HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3C1 - GMCH FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D1 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E2 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 9, 17 bytes
System Slot Information
Designation: J6B2
Type: x16 PCI Express
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:01.0
Handle 0x0019, DMI type 9, 17 bytes
System Slot Information
Designation: J6B1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.3
Handle 0x001A, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Mobile Intel HD Graphics
Handle 0x001B, DMI type 11, 5 bytes
OEM Strings
String 1: Dell System
String 2: 1[05E3h]
String 3: 3[1.0]
String 4: 4[0001]
String 5: 5[0000]
String 6: 6[D0, D4, D8, DA, DE]
String 7: 7[]
String 8: 8[]
String 9: 9[]
String 10: 10[A02]
String 11: 11[]
String 12: 12[]
String 13: 13[P20S]
String 14: 14[0]
String 15: 15[0]
Handle 0x001C, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.
Handle 0x001D, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: Bus Mouse
Buttons: 2
Handle 0x001E, DMI type 22, 26 bytes
Portable Battery
Location: System Battery
Manufacturer: SDI
Manufacture Date: Not Specified
Serial Number: Not Specified
Name: DELL 7YM0739
Chemistry: Lithium Ion
Design Capacity: 51060 mWh
Design Voltage: 7400 mV
SBDS Version: 1.0
Maximum Error: 100%
OEM-specific Information: 0x00000001
Handle 0x001F, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0021, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x0022, DMI type 28, 20 bytes
Temperature Probe
Description: CPU Internal Temperature
Location: Processor
Status: OK
Maximum Value: 127.0 deg C
Minimum Value: 0.0 deg C
Resolution: 1.000 deg C
Tolerance: 0.5 deg C
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0xB000, DMI type 176, 10 bytes
OEM-specific Type
Header and Data:
B0 0A 00 B0 00 00 00 00 E3 05
Handle 0xB100, DMI type 177, 12 bytes
OEM-specific Type
Header and Data:
B1 0C 00 B1 1A 06 00 00 00 00 00 00
Handle 0x0025, DMI type 208, 12 bytes
OEM-specific Type
Header and Data:
D0 0C 25 00 02 05 FE 00 E3 05 01 02
Strings:
20130614
20130924
Handle 0x0026, DMI type 212, 57 bytes
OEM-specific Type
Header and Data:
D4 39 26 00 70 00 71 00 01 49 50 48 9C 00 49 FC
01 9B 00 49 FC 00 7F 01 4A FB 04 80 01 4A FB 00
53 01 4A F7 08 52 01 4A F7 08 7B 01 4A EF 10 7C
01 4A EF 10 FF FF 00 00 00
Handle 0x0027, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 27 00 01 02 01 00 00
Strings:
INTEL
0000
Handle 0x0028, DMI type 217, 8 bytes
OEM-specific Type
Header and Data:
D9 08 28 00 01 02 00 00
Strings:
Handle 0x0029, DMI type 219, 11 bytes
OEM-specific Type
Header and Data:
DB 0B 29 00 00 01 02 03 00 04 05
Strings:
Handle 0x002A, DMI type 220, 22 bytes
OEM-specific Type
Header and Data:
DC 16 2A 00 01 F0 00 00 02 F0 00 00 00 00 03 F0
04 F0 00 00 00 00
Handle 0x002B, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 2B 00 00 00 00 00 00 03 00 00 00 00 00 00
00 00 00
Handle 0x002C, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 2C 00 01 08 FF FF 00 00 00 00 00 00 00 00
Handle 0x002D, DMI type 4, 42 bytes
Processor Information
Socket Designation: SOCKET 0
Type: Central Processor
Family: Core i5
Manufacturer: Intel
ID: 51 06 04 00 FF FB EB BF
Signature: Type 0, Family 6, Model 69, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
Voltage: 1.2 V
External Clock: 100 MHz
Max Speed: 3800 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: Socket rPGA988B
L1 Cache Handle: 0x0004
L2 Cache Handle: 0x0005
L3 Cache Handle: 0x0006
Serial Number: Not Specified
Asset Tag: Fill By OEM
Part Number: Fill By OEM
Core Count: 2
Core Enabled: 2
Thread Count: 4
Characteristics:
64-bit capable
Handle 0x0004, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L1
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Other
Associativity: 8-way Set-associative
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L2
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L3
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 3072 kB
Maximum Size: 3072 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 12-way Set-associative
Handle 0x0007, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0020, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0007
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: Hynix/Hyundai
Serial Number: 00000001
Asset Tag: 0987654321
Part Number:
Rank: 1
Configured Clock Speed: 1600 MHz
Handle 0x0023, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0020
Memory Array Mapped Address Handle: 0x002F
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x0024, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0007
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: Hynix/Hyundai
Serial Number: 00000002
Asset Tag: 0987654321
Part Number:
Rank: 1
Configured Clock Speed: 1600 MHz
Handle 0x002E, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0024
Memory Array Mapped Address Handle: 0x002F
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x002F, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0007
Partition Width: 2
Handle 0x0037, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 37 00 31 00 00 00 00 00 00 00 00 00 00 00
F8 00 43 9C 00 00 00 00 01 20 00 00 05 00 09 00
D1 05 02 00 00 00 00 00 C8 00 FF FF 00 00 00 00
00 00 00 00 26 00 00 00 76 50 72 6F 00 00 00 00
Handle 0x0038, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0039, DMI type 127, 4 bytes
End Of Table
Last edited by fungi (2013-10-13 10:31:45)Semi solved the problem by building a kernel with an ubuntu .config from http://kernel.ubuntu.com/~kernel-ppa/ma … y/current/
I think i have multi touch working on the touchscreen, but this has resulted in breakage of the synapic touchpad which is now operating in a very simple mode (no scrolling or multitouch).
Probably best to follow https://bugs.launchpad.net/ubuntu/+sour … ug/1218973 and http://thread.gmane.org/gmane.linux.kernel.input/32207 for a real solution -
I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
Here are the specks on both:
Inspiron
Processor
4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
Operating System
Help Me Choose
Windows® 8.1 (64Bit) English
Memory2
8GB Dual Channel DDR3 1600MHz (4GBx2)
Hard Drive
1TB 7200 rpm SATA 6Gb/s Hard Drive
Video Card
NVIDIA® GeForce® 705 1GB DDR3
Ports
Front
(2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
Rear
Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
Media Card Reader
Integrated 8-in-1 Media Card Reader
(supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
Memory Slots
2 DIMM Slots
Chassis
Bluetooth
BT 4.0 via 1705 WLAN card
Chipset
Intel® H81 PCH
Power
300 Watt Power Supply
XPS 8700
Processor
4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
Operating System
Help Me Choose
Windows 8.1 (64Bit) English
Choose Options
Memory2
12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
Hard Drive
1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
Video Card
NVIDIA GeForce GTX 745 4GB DDR3
CPU Thermal
86W
Graphics Thermal
225W/150W/75W
Power
460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
Ports
Bays
Support for 4 HDD bays: including (3) 3.5” HDDs
–Capable of 1 SSD and 3 HDD configuration
Media Card Reader
19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
Slots
Memory Slots
4 DIMMFrom my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
I hope this helps. -
I just need a yes or no answer (Or a detailed one as to why if you must). Will these specs handle Adobe Premiere Pro CS5 & After Effects? I'm sorry if this is a repetitive question.
2nd generation Intel® Core™ i7-2760QM processor 2.40 GHz with Turbo Boost 2.0 up to 3.50 GHz
750GB 7200 RPM SATA Hard Drive
NVIDIA® GeForce® GT 555M 3GB graphics with Optimus
17.3" FHD (1080p) with 2.0MP HD Webcam
Tray Load Blu-ray® Triple Writer (reads and writes CDs, DVDs, BDs)
I know there are Movie Editing laptops, but the Dell XPS-17 is my price range. What do you think?You need a 2nd 7200rpm hard drive for your video files
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t -
So i bought this new Core i5 8300 Dell desktop a few days ago (march 27), this model was affected by the sandy bridge recall. I asked in the store if it still had the issue or not and they couldn't tell. I took the risk and bought it, i called dell support and they said that all new models are unaffected, but when i opened the box there was a sticker that said "JAN 14, 11"... so now i don't know what to think, how can i be sure that my machine don't have this issue ? I appreciate your help. Thanks.
http://www.bestbuy.com/site/Dell+-+Studio+XPS+Desktop+/+Intel%26%23174%3B+Core%26%23153%3B+i5+Proces...
Solved!
Go to Solution.CamGram wrote:
Please, don't assume that your computer is okay. I bought a Dell XPS 8300 with an Intel Core i7 on March 20th. My assumption was that it would be okay because Best Buy took this computer off their website once the Sandy Bridge problem was identified. When it went back on their website I thought that they had the "fixed" computers. I was wrong. I checked with Dell today (my manufacturing date was December 28th) and they said that my machine was affected. They offered to send out a technician to replace the motherboard. I called Best Buy to express my extreme displeasure and was told that they would replace my computer. The problem is that I have extensive Photography software downloaded on my machine...Photoshop, Lightroom, Topaz,Nik Efex, On One, etc. etc. So....I asked if the Geek Squad could reinstall my programs for me. The answer was an unequivacable "NO". I was offered a 50% discount on some kind of Geek Squad service plan. I do not understand why Best Buy still had the "affected" machines on their shelves. They were well aware of the problem. I am very angry that I bought an $1,100 machine and get this kind of service from them. I will never ever buy another product from Best Buy.
My question now is....should I exchange this computer for a new one and go through the painful process of uninstalling and reinstalling all of my software or should I just accept Dell's offer to replace the motherboard?
If I were in your position I'd go with the Dell offer. That way you can keep your software with minimal hassle. However, it's inexcusable that Best Buy sold an affective machine that late in the game. I don't know why this happened.
Another option would be to image the drive to a backup drive then do a full machine exchange - but keep in mind the image will likely fail to work properly if restored to a different type of machine than an XPS 8300.
If you do not have any storage devices connected to one of the four SATA2 ports of the motherboard (Only to the two SATA3 ports), you won't be affected by the defect so can continue using the machine until Dell does the motherboard swap.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Dell XPS 15 : Nvidia hardwired HDMI with multiple monitors with KDE
Hello everyone,
I did an Archlinux instalation a few months back in my Dell XPS 15 laptop and configured my Nvidia card with bumblebee and primusrun.
I have a extra monitor now and want to use dual monitors with my system.
I tryed the following guides for setting up the dual screens outputs without success:
https://wiki.archlinux.org/index.php/Bu … creenclone
https://wiki.archlinux.org/index.php/De … al_Display
THe output from the last try was this:
[chicao@svadisthana etc]$ startx
/usr/bin/Xorg.wrap: Only console users are allowed to run the X server
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Couldn't get a file descriptor referring to the console
[chicao@svadisthana etc]$ sudo startx
xauth: file /root/.Xauthority does not exist
xauth: file /root/.Xauthority does not exist
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux svadisthana 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 23:13:48 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=40feb1b1-2717-4fee-89b9-e1e9cdd03278 rw quiet
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Thu Nov 27 11:56:17 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
/etc/X11/xinit/xinitrc: line 55: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 51: twm: comando não encontrado
/etc/X11/xinit/xinitrc: line 52: xclock: comando não encontrado
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
My bumblebee.conf file:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=true
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=none
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/X11/xorg.conf
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=none
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
My /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
The X server is started by KDM. And don't know if there is some sort of way that I should configure KDE to start X with the bumblebee configuration.
Anyway, does somebody came across this kind of issue? How can I make my external and laptop screen work properly ?I solved it by brute force:
pacman -Rdd libgl
(delete conflicting package without checking dependencies)
pacman -S nvidia nvidia-utils
And now I can watch high-quality video on a big external TV through HDMI (driven by Nvidia card), while also independently using internal monitor. -
[SOLVED] Dell XPS 15 l502x + GT 540M + Bumblebee: No devices detected
Hello everyone,
I have Dell XPS 15 l502x laptop with GT 540M graphics card with optimus support. I want to enable optimus with bumblebee, but no matter what I do I just can't make it work. I'm already start thinking that this laptop is not supported....
I've installed the following packages from AUR to support optimus on my laptop:
bumblebee
nvidia-bumblebee
nvidia-utils-bumblebee
Also, I am using my own custom configured kernel, uname -a shows:
Linux milktea 3.2.13-1-abs #1 SMP PREEMPT Wed Mar 28 14:16:29 CST 2012 i686 Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz GenuineIntel GNU/Linux
The only changes from ArchLinux default kernel is CPU architecture (I changed to Core 2 Duo and later instead of default i686) and support for PAE.
When I run optirun glxgears I get this output:
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ERROR]Aborting because fallback start is disabled.
And Xorg.8.log is:
[ 4430.976]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 4430.976]
X.Org X Server 1.12.0.901 (1.12.1 RC 1)
Release Date: 2012-03-30
[ 4430.976] X Protocol Version 11, Revision 0
[ 4430.976] Build Operating System: Linux 3.3.0-1-ARCH i686
[ 4430.976] Current Operating System: Linux milktea 3.2.13-1-abs #1 SMP PREEMPT Wed Mar 28 14:16:29 CST 2012 i686
[ 4430.976] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux-abs.img BOOT_IMAGE=../vmlinuz-linux-abs
[ 4430.976] Build Date: 31 March 2012 09:47:27AM
[ 4430.976]
[ 4430.976] Current version of pixman: 0.24.4
[ 4430.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4430.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4430.976] (==) Log file: "/var/log/Xorg.8.log", Time: Sat Apr 7 12:10:38 2012
[ 4430.977] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4430.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4430.977] (==) ServerLayout "Layout0"
[ 4430.977] (**) |-->Screen "Screen0" (0)
[ 4430.977] (**) | |-->Monitor "Monitor0"
[ 4430.977] (**) | |-->Device "Device0"
[ 4430.977] (**) Option "AutoAddDevices" "false"
[ 4430.977] (**) Not automatically adding devices
[ 4430.977] (==) Automatically enabling devices
[ 4430.977] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4430.977] Entry deleted from font path.
[ 4430.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4430.977] Entry deleted from font path.
[ 4430.977] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4430.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4430.977] Entry deleted from font path.
[ 4430.977] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4430.977] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4430.977] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4430.977] (==) |-->Input Device "<default pointer>"
[ 4430.977] (==) |-->Input Device "<default keyboard>"
[ 4430.977] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4430.977] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4430.977] (II) Loader magic: 0x82225a0
[ 4430.977] (II) Module ABI versions:
[ 4430.977] X.Org ANSI C Emulation: 0.4
[ 4430.977] X.Org Video Driver: 12.0
[ 4430.977] X.Org XInput driver : 16.0
[ 4430.977] X.Org Server Extension : 6.0
[ 4430.978] (--) PCI:*(0:1:0:0) 10de:0df4:1028:050e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4430.978] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4430.978] (II) LoadModule: "extmod"
[ 4430.979] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4430.979] (II) Module extmod: vendor="X.Org Foundation"
[ 4430.979] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.979] Module class: X.Org Server Extension
[ 4430.979] ABI class: X.Org Server Extension, version 6.0
[ 4430.979] (II) Loading extension MIT-SCREEN-SAVER
[ 4430.979] (II) Loading extension XFree86-VidModeExtension
[ 4430.979] (II) Loading extension XFree86-DGA
[ 4430.979] (II) Loading extension DPMS
[ 4430.979] (II) Loading extension XVideo
[ 4430.979] (II) Loading extension XVideo-MotionCompensation
[ 4430.979] (II) Loading extension X-Resource
[ 4430.979] (II) LoadModule: "dbe"
[ 4430.979] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4430.979] (II) Module dbe: vendor="X.Org Foundation"
[ 4430.979] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.979] Module class: X.Org Server Extension
[ 4430.979] ABI class: X.Org Server Extension, version 6.0
[ 4430.979] (II) Loading extension DOUBLE-BUFFER
[ 4430.979] (II) LoadModule: "glx"
[ 4430.979] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4430.998] (II) Module glx: vendor="NVIDIA Corporation"
[ 4430.998] compiled for 4.0.2, module version = 1.0.0
[ 4430.998] Module class: X.Org Server Extension
[ 4430.998] (II) NVIDIA GLX Module 295.33 Sat Mar 17 15:18:29 PDT 2012
[ 4430.999] (II) Loading extension GLX
[ 4430.999] (II) LoadModule: "record"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4430.999] (II) Module record: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.13.0
[ 4430.999] Module class: X.Org Server Extension
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension RECORD
[ 4430.999] (II) LoadModule: "dri"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4430.999] (II) Module dri: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension XFree86-DRI
[ 4430.999] (II) LoadModule: "dri2"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4430.999] (II) Module dri2: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.2.0
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension DRI2
[ 4431.000] (II) LoadModule: "intel"
[ 4431.000] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4431.000] (II) Module intel: vendor="X.Org Foundation"
[ 4431.000] compiled for 1.11.99.903, module version = 2.18.0
[ 4431.000] Module class: X.Org Video Driver
[ 4431.000] ABI class: X.Org Video Driver, version 12.0
[ 4431.000] (II) LoadModule: "mouse"
[ 4431.000] (WW) Warning, couldn't open module mouse
[ 4431.000] (II) UnloadModule: "mouse"
[ 4431.000] (II) Unloading mouse
[ 4431.000] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 4431.000] (II) LoadModule: "kbd"
[ 4431.001] (WW) Warning, couldn't open module kbd
[ 4431.001] (II) UnloadModule: "kbd"
[ 4431.001] (II) Unloading kbd
[ 4431.001] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4431.001] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4431.001] (--) using VT number 7
[ 4431.001] (EE) No devices detected.
[ 4431.001]
Fatal server error:
[ 4431.001] no screens found
[ 4431.001]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4431.001] Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4431.001]
Does anyone have any ideas on what might be wrong? Please, help.
Thanks in advance.
Last edited by leonid (2012-04-12 01:55:31)I have bumblebee, dkms-bbswitch, nvidia-utils-bumblebee, nvidia, virtualgl
My bumblebee.conf is:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=true
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=bbswitch
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=bbswitch
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
I haven't edited any xorg.conf files whatsoever, so they are just the default ones. Here is /etc/bumblebee/xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection
What are the full relevant sections in lspci -vvnn saying? your grepping removed the verbose bits. e.g. when my nvidia card is off, it gives:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df5] (rev ff) (prog-if ff)
!!! Unknown header type 7f
but different when it's turned on. -
[SOLVED] Xorg input hotplugging + Catalyst + Suspend = blank screen
Ok, here's the deal. The suspend and resume worked fine with the same setup, except Xorg's input hotplugging disabled. Since the hotplugging the new way of handling things I would like this to work.
The suspending works as expected, the power led is nicely blinking and all. However when I want to resume my session, the screen stays blank. System is still responsive, as I can reboot with Ctrl+Alt+Del.
The software I'm using is pm-utils 1.2.5-1, catalyst version 9.4 from AUR, 9.5 doesn't work for me (rendering is awfully slow), xorg-server 1.6.1.901-1.
I've tried various quirk-options with pm-suspend with no success. Any ideas would be appreciated, thanks!
Last edited by ap_ (2009-06-04 19:19:48)Update: I suspect this one's a kernel issue, since disabling hotplugging didn't work either and kernel 2.6.29.4 was recently added to core repo. Too bad I don't have the .3 version package anymore so I can't confirm this.
Last edited by ap_ (2009-06-03 18:33:37)
Maybe you are looking for
-
When I double click Home button to change apps quickly, only the four apps that reside on the task bar show. All of my apps would show prior to my reset of the iPad last night (to fix the Home button). Any ideas on how to fix?
-
ATT: Apple - Adding "copy/cut & paste" soon??
Attention Apple: Any plans on ADDING the "copy/cut & paste" feature into the iPod soon?? It's getting ridiculous that it's been so long and after many reviews from various tech magazines and other reviews that the "copy/cut & paste" feature is still
-
Can i get the apple store to fix my ipod?
or do i have to send it in
-
Hello, Can anyone tell me what are the Reports that can be used for Inventory/stocks for QM. Basically we need a report for Inventory in Quality Inspection and in Restricted Stock. Is there a Report that can be ran by a Plant and give all the materia
-
How to Get Text to Appear on in a Cell of a Cross-Tab
<p>Have you ever felt the pain of not having enough control over the content of the cells in the cross-tab? For instance, ever wanted to put text or even just round the numbers to the nearest thousands to save room? Did you know that the Display St