Delta Changes in ECC 6.0 compared to R/3 4.7 - SAP MM

Hi Guys,
Please list me some 4-5 Delta changes made in SAP Materials Management - ECC 6.0 compared to SAP R/3 4.7 version.
Thanks,
Pallu
Edited by: Pallu Tillu on Sep 15, 2009 3:11 PM

Hi
see these links
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Reward points if useful
Regards
Anji

Similar Messages

PM delta changes in ECC 5.0 from 4.6

Hi
Can you let me know the functional enhancements / delta changes that has been made by SAP in ECC 5.0 compared to 4.6 version.
regards
jafffer

Dear Jaffer,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Problem in delta changes from ECC to CRM for Customers created in CRM systm

Dear all,
I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
Your suggestions are highly appreciated.
Best regards
Raghu ram

Hi Shanthala,
Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
Kinldy help me to resolve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Delta changes for ECC 6.0

Did anyone know about Delta Changes if i we want to upgrade from 4/6c into ECC6.0 ? Please help.

hi,We will be embarking on an upgrade of SAP R/3 4.6c to mySAP ERP
ECC 6.0 soon (Sep 07). I will be wearing the change management
lead hat, amongst other hats. As far as I know, this will be
purely a 'technical' upgrade, except for some FI changes.
I have 2 questions for which I would appreciate help and
feedback.
(1) From an organization change perspective, is it correct to
assume that there is no impact to business processes nor any
need for retraining as the same screens/windows are presented to
the customer ? The only difference is the delivery vehicle,
from the SAP GUI to WAS 6.2 browser based windows. The screens
and functions remain the same therefore there is no need for
end-user retraining. Is this correct?
(2) We have a team of ABAP skilled technologists supporting the
current R/3 system. I was told that those skills are enough to
support the new ERP 2005 system. Technically, we do NOT do any
customizations of screens or any bolt-on applications. The
tech staff's concentration is on external 3rd party interfaces
to and from SAP and reporting. With the SAP apps now being
delivered via a WAS, I am not totally convinced that we don't
need to beef up our technical staffs skills with J2EE skills. I
was even told that the J2EE stack in SAP is optional (?). What
are the technical skills required to support the new mySAP
environment ? We have Basis covered. My main concern is the
technical staff supporting the business side
i hope that it is healpful to you.
regards,
reddy

Delta changes taken place in PS functionality from 4.6C to ECC 6

Dear All
Can you tell me where we can get delta changes taken place in PS functionality from 4.6C to ECC 6 from?
Is it readily available with SAP sites or do we need to find out manually?How?
Regards
SV

Please refer this post.
Difference between version SAP R/3 4.6C and SAP ERP 6.0
Re: PS between R/3 4.7 and ECC6.0.
Regards
Nitin P.

Changes in ECC 6.0 from 4.6

Hi Experts,
Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
General ledger     FI
- post document with different document types     FI     "
FB50"
- display document     FI     FB03
- reverse document     FI     FB08
- print document     FI     F.62
- display/change line items     FI     FBL3N
- display balancies     FI     FS10N
- clear account     FI     F-03
reporting     FI
- P/L+B/S     FI     S_ARL_87012284
- document journal     FI     S_ALR_87012287
- general ledger     FI     S_ALR_87012282
Closing     FI
- valuation AP and AR     FI     F.05
- valuation G/L     FI     F.05
- valuation bank accounts     FI     F.05
Others     FI
- standard analysis     SD     MCSI
- creating order     CO     KO01
Master records
- creating account in chart of account     FI     FSP0
- creating account in company code     FI     FSS0
- edit financial statement     FI     OB58/FSE2
- exchange rates     FI     S_BCE_68000174
- open and close period     FI     S_ARL_87003642
Accounts payable     FI
- create vendor     FI     FK01
- document entry/fast entry     FI     FB10
- post/delete invoice     FI     FBV0
- vendor display/change line items     FI     FBL1N
- payment run dom/foreign test also with bank     FI     F110
- post manual outgoing payment     FI     F-53
- post manual incoming payment     FI     F-52
Reporting     FI
Accounts receivables
- change customer master data     FI     XD02
- post invoice     FI     FB70
- customer display/change line items     FI     FBL5N
- post manual incoming payment     FI     F-28
- dunning run     FI     F150
Reporting     FI
- open items     FI     F.27
- account statement     FI     F.27
- customer line items     FI

Dear Jaffer,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
Reward points if it helps!!
Best regards,
Vikash.
Message was edited by: Vikash Krishna

Query related to Delta changes in ABAP Dictionary

Dear All,
Can anyone of you please provide me the necessary documents or can suggest the delta changes from 4.6C to ECC 6.0 for Data Dictionary.
Thanks and regards,
Atanu

You should be able to find the release documentation for ECC6.0 on the help.sap.com website. Will post a link if I come across it.
I doubt there would be too many (if any) changes to the data dictionary though.
Hope this helps.
Sudha

Delta Changes from CRM to ERP

Middleware gurus,
Our delta changes with the BPs from CRM to ECC are generating a "Message type is unknown". Has anyone ever seen this? It works fine from ECC to CRM. We're on CRM 5.0 and ECC 5.0.
Does anyone have any clue???

Hi,
Please check the Master Data Syncronization settings under ERP->SPRO->Cross Application Components->BP-> Master Data Syncronization.
You need to define the required BP Role, Groups and map accordingly to Account groups. Since you are facing problem with CRM-> ERP, you need to check the settings for CRM->ERP only.
I hope this helps.

Delta changes from 4.6 to ECC6.0

Hi Experts,
Please help me to get delta changes from 4.6 to ECC. It will be great if you provide me indeapth info regarding this.
Thanks in advance,
Venkat

Dear Venkat,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

What is new in ECC 5.0 compared to R/3 4.7 version

Hi
what is new in ECC 5.0 compared to R/3 4.7 version
Thanks in Advance
Deepa

Hi
see these links
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Reward points if useful
Regards
Anji

PO Changes from ECC to SRM 7.0 using PurchaseOrderChangedInformation_Out

Hello,
I am having an issue with sending PO changes made in ECC to SRM. When a PO is changed in ECC, I see an XML message with the sender interface name of PurchaseOrderChangedInformation_Out in namespace http://sap.com/xi/APPL/Global2 being created in ECC in SXI_MONITOR.
However this fails in XI because there is no configuration (receiver determination) in XI to handle this sender interface. I have setup the SAP supplied SE_Services_Procurement scenario in XI.
We are on XI 7.0 and SRM 7.0
Has anyone faced this issue before ? Are PO changes handled through PurchaseOrderChangedInformation_Out ? For PO creates I see a PurchaseOrderERPRequest_Out_V1 message being created in ECC and this is indeed transferred to SRM
Thanks
Anil

Dear Anil,
About SRM7.0 and XI please see url:http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=C66D0901602211DA36BB000F20DAC9EF

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

Queue is getting struck for every delta change in CRM 5.0

Hi Middleware gurus,
The queues are getting struck with status 'READY' for each of these following scenarios:
1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
4. Material delta change download from R/3 to CRM (CRM - SMQ2)
5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
Thanks,
Kishore

Hi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti

How to retrive delta changes in Infotype

Dear All
I am working on development of New Interface program from SAP to 3rd party application and this will run on daily.
I want to retrive delta changes record alone in 10 infotype tables.
I checked the Tech.setting of these 10 infotype table and came to know that log data changes & Maintain as transparent table check box is selected.
But i couldn't find any record in the table: DBTABLOG
Is there is any other table where the delta change in the Infotype get saved.
The infotype am checking is IT0000,IT0001,IT0002..etc
Could any one help me to solve this issue...
Definitely I will reward for best answer
Regards
Babu

Hi Babu,
please use RPUAUD00 program.
you can do assign above program in your interface by using SUBMIT.
another way. you create one Z function module, here you do submit RPUAUD00 program.
Please find sample code as below.
RP_PROVIDE_FROM_LAST p0167 space pn-begda pn-endda.
IF p0167-aedtm GT wa_last_create_date.
l_search_text = '.Benefit Plan.'.
l_infotype = '0167'.
PERFORM check_for_change USING l_search_text l_infotype
CHANGING wa_changes.
IF wa_changes EQ c_checked.
RETURN.
ENDIF.
*& Form CHECK_FOR_CHANGE
text
FORM check_for_change USING p_search_text TYPE zdesc_15
p_infotype TYPE choic
CHANGING p_changes.
CALL FUNCTION 'ZHR_GET_INFOTYPE_FIELD_CHANGES'
EXPORTING
search_text = p_search_text
infotype = p_infotype
pernr = p0000-pernr
bypass_type_check = 'X'
IMPORTING
old_value = wa_old
new_value = wa_new
TABLES
date_range = s_datum
EXCEPTIONS
no_change_found = 1
OTHERS = 2.
IF sy-subrc EQ 0.
p_changes = c_checked.
ENDIF.
ENDFORM. " CHECK_FOR_CHANGE
I assigned RPUAUD00 program in Z function module.
Cheers,
Guru.

Delta Changes in ECC 6.0 compared to R/3 4.7 - SAP MM

Similar Messages

Maybe you are looking for