Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

Similar Messages

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

Why audio books are not coming into itunes

generally I download 2 books a month from audible.com, after download from audible site, they pop into itunes and i transfer them to an ipod. Even though audible show them as downloaded and my mac download window shows them as downloaded, they are not in itunes nor if i use search can i find them on my computer, Anyone have a suggestion for obtaining the books in the usual manner. thanks joanlvh

These are user-to-user forums, you are not talking to Apple here.
Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

TLB VMI Sales orders are not publishing into ECC

Hello All,
I am trying to transfer the VMI Sales orders in TLB Interactive planning from SCM (7.0) to ECC (6.0)
without any success. I am getting the messages "You have selected 0 change pointer", "0 change
pointers(s) processed" and "0/1 orders were transferred".
I could process these orders and send them to ECC via /SAPAPO/CCR. Did anyone face this
issue and if so please let me know reason for this issue.
Thanks,
Venkat

Hi Senthil,
In the interactive TLB, there is a option to send the order to the OLTP system directly. If
you select this on a particular order, then a change pointer is created and processed
immediately and the order is sent across to ECC. But that's not happening in my case.
I know of the transaction /SAPAPO/C5 which can be used to process the change pointers
in the background. As I mentioned above, I am trying to process in the interact TLB and
not in a batchmode. Anyway, the change pointer is not created in the first place.
Thanks,
Ratnam

Billing Documents are not coming.

Hi ,
System : DEV
Source : AFS ( SAP MOdule only)
I have activated the LO DS : 2LIS_13_VDITM and I am able to see the data in RSA3.But in my source table i have 206 entries but I am getting 67 only.
When I have checked
There three series of Billing documents
1. 80000005
2. 90000004
3. 44000001
In RSA3 I am able 1and 2 series Billing documents.I am not getting the 3rd series.Even i have checked Document type also ( same for all Billing Docs).
Pl suggest where i need to check to solve my issue.
Regards
Ram

RSA3 will show the documents filled in set-up tables only.
Are you sure the third series i.e 44000001....... was included in the filling into set-up tables and not missed out or filtered due to some restirction on doc type/doc no will filling the set-up tables.

Open sales orders are not coming in credit exposure

Hi,
We have implemented FSCM credit management, when i am running credit exposure, i am able to see open items from FI (200) but not for open orders (100) & Delivery (400), we have created some sales orders, which have exceeded the credit limit, system should give us a warning message. Could anyone help me to overcome this issue.
Thanks,
Sai

Hi Sai,
Additionally, you should check the following BADI_SD_CM, if the implementation of that BADI is correct then it should work.
Best regards,
Cristobal.

Weights are not coming into order correctly

Hi gurus,
When entering a standard order for a material XYZ with ref to a Qty contract the weights change if there is more than one line entered. On the first line 500 pcs has a weight of .530 and on the second line 500 pcs has a weight of .930...
For ur info...In Mat.master Base unit is EA and Net&Gross wt is .001LB
And the qty contract created for qty 14000EA .
I don't understand the logic behind this..Appreciate if u can throw some light on this issue...
Reg
JJ

Hi JJ
In MMR if base unit of measure is EA and Net & gross wt is .001LB then system must be rounding before 0.50 or more than 0.50 in decimals. Also check the base unit of measure data wheather any rounding has been maintained or not. Also check in the pricing procedure wheather any Rounding condition type has been maintained or not to round the decimals near to the less or more 0.50 points
Regards
Srinath

Messages are not coming into my inbox...

Can anyone help??
My mail activity says I have messages that are being received but they do not seem make it into my inbox. I can access the emails as they are redirected via my pop account, but its a pain.
Does anyone know why messages would suddenly stop arriving?
I am a complete beginner, but I set it up 2 years ago and its been fine till now.
Cheers guys.

Hi SOLVED IT !!
In Mail, i clicked on the gear wheel icon - bottom left of Mail window, clicked on Get Account Info - then on Messages on Server - there were titles of all messages I'd seen on mail2web.com but not downloaded to my Inbox in Mail.
Noticed that there was a message with no title and Sender Unknown, it was 25MB !!! Deleted it, and all fine now !!! Hope this works for you. Not sure if Mail didnt like one mega message or if the Inbox was at capacity - do have 1800 messages in there - its my memory box !! good luck Chris

TS1627 I can receive my mail on my iPod and iPhone, but the messages are not coming into my macbook pro.

When I set up my two email accounts on my new mac, I was receiving mail just fine, and I could check it on any of my 3 devices, and view read or unread between the devices. Now no mail is getting through to my laptop. Any ideas??

Hello annasus77,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Have a nice day,
Mario

Unable to proceed in change document are not updating in CDHD, CDPOS tables

Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
Prabhakar

CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers

Sales document was not changed BAPI

Hi Experts,
        Am trying to upload sales documents using BAPI_SALESDOCU_CREATEFROMDATA1, but am getting an error like "sales document was not changed". here is my sample code. Thanks in Advance.
TYPE-POOLS : TRUXS.
types : BEGIN OF TY_file,
auart TYPE auart,
vkorg TYPE vkorg , "
vtweg TYPE vtweg ,
spart TYPE spart ,
KUNNR TYPE kunnr ,
KUNNR1 TYPE kunnr ,
matnr TYPE matnr ,
dzmeng TYPE dzmeng ,
WERKS_d TYPE werks_d ,
END OF TY_file.
*TYPES : tt_file TYPE STANDARD TABLE OF ty_file.
data : it_file TYPE TABLE OF TY_FILE,
               wa_file TYPE TY_file.
PARAMETERs : p_file TYPE IBIPPARMS-PATH.
at SELECTION-SCREEN on VALUE-REQUEST FOR p_file.
   PERFORM browse_file.
   START-OF-SELECTION.
   PERFORM LOAD_FLAT_FILE.
   PERFORM CALL_BAPI_CREATE.
FORM browse_file .
CALL FUNCTION 'F4_FILENAME'
IMPORTING
    FILE_NAME           = p_file
ENDFORM.                    " browse_file
FORM LOAD_FLAT_FILE .
   DATA : LT_RAW TYPE TRUXS_T_TEXT_DATA.
   CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
     EXPORTING
       I_FIELD_SEPERATOR          = 'X'
      I_LINE_HEADER              = 'X'
       I_TAB_RAW_DATA             = LT_RAW
       I_FILENAME                 = P_FILE
     TABLES
       I_TAB_CONVERTED_DATA       = IT_FILE
    EXCEPTIONS
      CONVERSION_FAILED          = 1
      OTHERS                     = 2
   IF SY-SUBRC = 0.
     MESSAGE 'UPLOADED' TYPE 'I'.
       ENDIF.
ENDFORM.                    " LOAD_FLAT_FILE
FORM CALL_BAPI_CREATE .
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                          WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                          WITH HEADER LINE.
LOOP AT IT_FILE INTO WA_FILE.
   header-doc_type = WA_FILE-auart.
   headerx-doc_type = 'X'.
   header-sales_org = WA_FILE-vkorg.
   headerx-sales_org = 'X'.
   header-distr_chan = WA_FILE-vtweg.
   headerx-distr_chan = 'X'.
   header-division = WA_FILE-spart.
   headerx-division = 'X'.
   headerx-updateflag = 'I'.             " flag for create a new document
   partner-partn_role = 'AG'.
   partner-partn_numb = WA_fILE-KUNNR.
   APPEND partner.
   partner-partn_role = 'WE'.
   partner-partn_numb = WA_fILE-KUNNR1.
   APPEND partner.
   itemx-updateflag = ''.
   item-itm_number = '000010'.
   itemx-itm_number = 'X'.
   item-material = WA_FILE-matnr.
   itemx-material = 'X'.
   item-plant    = WA_FILE-WERKS_d.
   itemx-plant   = 'X'.
   item-target_qty = WA_fILE-dzmeng.
   itemx-target_qty = 'X'.
   APPEND item.
   APPEND itemx.
   lt_schedules_in-itm_number = '000010'.
   lt_schedules_in-sched_line = '0001'.
   lt_schedules_in-req_qty    = WA_FILE-DZmeng.
   APPEND lt_schedules_in.
   lt_schedules_inx-itm_number = '000010'.
   lt_schedules_inx-sched_line = '0001'.
   lt_schedules_inx-updateflag = 'X'.
   lt_schedules_inx-req_qty     = 'X'.
   APPEND lt_schedules_inx.
   CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
        EXPORTING
             sales_header_in     = header
             sales_header_inx    = headerx
        IMPORTING
             salesdocument_ex    = v_vbeln
        TABLES
             return              = return
             sales_items_in      = item
             sales_items_inx     = itemx
             sales_schedules_in = lt_schedules_in
             sales_schedules_inx = lt_schedules_inx
             sales_partners      = partner.
* LOOP AT return WHERE type = 'E' OR type = 'A'.
*    EXIT.
WRITE : / RETURN-NUMBER, RETURN-TYPE, RETURN-MESSAGE.
* ENDLOOP.
* IF sy-subrc = 0.
*    WRITE: / 'Error in creating document'.
* ELSE.
*    COMMIT WORK AND WAIT.
*    WRITE: / 'Document ', v_vbeln, ' created'.
* ENDIF.
* LOOP AT RETURN.
*WRITE : / RETURN-NUMBER, RETURN-TYPE, RETURN-MESSAGE.
   ENDLOOP.
   END

Hi Experts,
        Am trying to upload sales documents using BAPI_SALESDOCU_CREATEFROMDATA1, but am getting an error like "sales document was not changed". here is my sample code. Thanks in Advance.
TYPE-POOLS : TRUXS.
types : BEGIN OF TY_file,
auart TYPE auart,
vkorg TYPE vkorg , "
vtweg TYPE vtweg ,
spart TYPE spart ,
KUNNR TYPE kunnr ,
KUNNR1 TYPE kunnr ,
matnr TYPE matnr ,
dzmeng TYPE dzmeng ,
WERKS_d TYPE werks_d ,
END OF TY_file.
*TYPES : tt_file TYPE STANDARD TABLE OF ty_file.
data : it_file TYPE TABLE OF TY_FILE,
               wa_file TYPE TY_file.
PARAMETERs : p_file TYPE IBIPPARMS-PATH.
at SELECTION-SCREEN on VALUE-REQUEST FOR p_file.
   PERFORM browse_file.
   START-OF-SELECTION.
   PERFORM LOAD_FLAT_FILE.
   PERFORM CALL_BAPI_CREATE.
FORM browse_file .
CALL FUNCTION 'F4_FILENAME'
IMPORTING
    FILE_NAME           = p_file
ENDFORM.                    " browse_file
FORM LOAD_FLAT_FILE .
   DATA : LT_RAW TYPE TRUXS_T_TEXT_DATA.
   CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
     EXPORTING
       I_FIELD_SEPERATOR          = 'X'
      I_LINE_HEADER              = 'X'
       I_TAB_RAW_DATA             = LT_RAW
       I_FILENAME                 = P_FILE
     TABLES
       I_TAB_CONVERTED_DATA       = IT_FILE
    EXCEPTIONS
      CONVERSION_FAILED          = 1
      OTHERS                     = 2
   IF SY-SUBRC = 0.
     MESSAGE 'UPLOADED' TYPE 'I'.
       ENDIF.
ENDFORM.                    " LOAD_FLAT_FILE
FORM CALL_BAPI_CREATE .
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                          WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                          WITH HEADER LINE.
LOOP AT IT_FILE INTO WA_FILE.
   header-doc_type = WA_FILE-auart.
   headerx-doc_type = 'X'.
   header-sales_org = WA_FILE-vkorg.
   headerx-sales_org = 'X'.
   header-distr_chan = WA_FILE-vtweg.
   headerx-distr_chan = 'X'.
   header-division = WA_FILE-spart.
   headerx-division = 'X'.
   headerx-updateflag = 'I'.             " flag for create a new document
   partner-partn_role = 'AG'.
   partner-partn_numb = WA_fILE-KUNNR.
   APPEND partner.
   partner-partn_role = 'WE'.
   partner-partn_numb = WA_fILE-KUNNR1.
   APPEND partner.
   itemx-updateflag = ''.
   item-itm_number = '000010'.
   itemx-itm_number = 'X'.
   item-material = WA_FILE-matnr.
   itemx-material = 'X'.
   item-plant    = WA_FILE-WERKS_d.
   itemx-plant   = 'X'.
   item-target_qty = WA_fILE-dzmeng.
   itemx-target_qty = 'X'.
   APPEND item.
   APPEND itemx.
   lt_schedules_in-itm_number = '000010'.
   lt_schedules_in-sched_line = '0001'.
   lt_schedules_in-req_qty    = WA_FILE-DZmeng.
   APPEND lt_schedules_in.
   lt_schedules_inx-itm_number = '000010'.
   lt_schedules_inx-sched_line = '0001'.
   lt_schedules_inx-updateflag = 'X'.
   lt_schedules_inx-req_qty     = 'X'.
   APPEND lt_schedules_inx.
   CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
        EXPORTING
             sales_header_in     = header
             sales_header_inx    = headerx
        IMPORTING
             salesdocument_ex    = v_vbeln
        TABLES
             return              = return
             sales_items_in      = item
             sales_items_inx     = itemx
             sales_schedules_in = lt_schedules_in
             sales_schedules_inx = lt_schedules_inx
             sales_partners      = partner.
* LOOP AT return WHERE type = 'E' OR type = 'A'.
*    EXIT.
WRITE : / RETURN-NUMBER, RETURN-TYPE, RETURN-MESSAGE.
* ENDLOOP.
* IF sy-subrc = 0.
*    WRITE: / 'Error in creating document'.
* ELSE.
*    COMMIT WORK AND WAIT.
*    WRITE: / 'Document ', v_vbeln, ' created'.
* ENDIF.
* LOOP AT RETURN.
*WRITE : / RETURN-NUMBER, RETURN-TYPE, RETURN-MESSAGE.
   ENDLOOP.
   END

Delta changes in R/3 sales document are not coming into CRM

Similar Messages

Maybe you are looking for