Delta Compressed and Deleted in the stage before .
Hi all,
i have a critical issue with an Delta logic in one of my Cubes.
A wrong ( logical ) Delta request was already Compressed in the Cube and Deleted in the stage before . This avoids further Delta Rquests in the Cube. By trying to request a delta i will be prompt to repeat the missing delta and it fails because of the missing request in the ODS. I cant reload the cube because of 14 Mio records this would take to long.
anyone an Idea how to correct the delta flow without reloading everything?
Many thanks in advance.
Regards
Ali
see in rsa7 the content of the repeat, are you able to do a selective delete from your cube to remove only that data?
If you can't manage that, you could set a repair request that fits the data you'll need to delete (date range? product? customer?) and only load the repair in the cube.
To have the delta work fine again, set the original request to red and delete in the ODS as well and then run the repeat, you can't run the repeat as long as the request is in the ODS.
Similar Messages
-
I just bought a song from iTunes on my iPhone and accidentally stopped the download before it finished. How do I continue the download?
It shows it in my music but is a light shaded grey. So I may not access the song. I tried repurchesing the song but iTunes won't let me.I had the same problem and solved it for myself, and I have a iphone 4s. I went to my songs and deleted the light grey songs then went to the itunes store, and selected more, then selected purchased. I scrolled down to the songs that were a light grey in my music, and pushed the download button ( icloud symbol with arrow on it) ,now my songs are successfully downloaded and ready to listen to any time!
-
Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version? -
Insert and Delete at the same time?
Hi,
I have a dynamic list and dynamic form. When a person inserts a record using the dynamic form, I would like to delete a record from another table using a foreign key when the new record is added (assuming a record exists in the other table). Is this achievable, and if so, can anyone provide any help?
Thanks in advance for any advice provided.
GaryAs kendenny says, this appears to be a misunderstanding of how database transactions work.
As Hoek says, if it's an insert and delete on the same table, there is a MERGE statement that can help do that as a single statement.
However, you do not do an INSERT from one table and a DELETE at the same time from another table. But that doesn't matter, because that's the point of logica transactions on a database.
You perform your insert, which starts a transaction (if one isn't already started).
You then delete from your other table (which adds to the transaction)
When you're happy that both things are done, you COMMIT your transaction which then applies those changes.
If you're not happy with something you can ROLLBACK, and that will undo all the changes from the transaction.
So, the commit and rollback allow the changes to be applied as one logical unit, even though the changes are applied in multiple steps. -
I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas
If the Mac's firmware was updated, you can try this Internet Recovery:
Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
If the firmware was not updated, then you can use the SL install disk. -
MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?
Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com
-
Someone sent me a recurring calendar appointment to my IPhone 4. I accepted it but now I would like to delete it since I am no longer attending. The planner was sent from Outlook. I cannot hit "edit" and "delete" on the IPhone. How can I delete this?
Try reading this forum post for suggested solutions as a start.
http://discussions.apple.com/message/7606191#7606191 -
When I drag an image over a clip to try and get picture in picture the options it gives me are only insert replace and delete not the picture in picture option how do i get the picture in picture option when i drag a picture over a clip?
Go to this. http://help.apple.com/imovie/mac/10.0/#mova1aaa682b . It is the link to show you how to use picture in picture. I had this same problem not too long ago.
-
i hav iphone and i restart it and delete all the files inside how can i start it again it say i need a valid sim with no pin lock to activate iphone again
ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.
-
HT1766 Can I still recover an app that was accidentally deleted at the stage it was deleted?
I have been using the Smurf's Viilage App and it was accidentally deleted, how can I recover the same game at the stage when it was deleted?
You can't, at best you could Restore the iPad using the latest back up to get back to the time the back up was made. If you backed up the iPad after you deleted the app you will have to start over.
-
I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I want to search for a pattern string in the entire registry and need to delete all the keys and sub-keys that contain the pattern. How can I implement this in VB Script or C#? Appreciate if you can give some sample examples. Now every time, I am manually
searching for the pattern in registry and deleting one by one.
Thanks PrasadThere is no built in way to do this. You'll end up having to enumerate all keys and values in the entire registry and comparing each one for a pattern using Regex or similar. This is going to be really slow but there isn't much else you can do about
it (other than parallelize the enumeration). Also note that you won't have permissions to all keys for read and/or write access so you'll need to skip over those using exception handling.
Michael Taylor
http://blogs.msmvps.com/p3net -
How can I import all photos from iPhoto and delete all the ones currently on my iPad?
I uploaded all of my iPad's photos to iPhoto('08) thinking it would be easier to delete and organize them. Now that I've done that in iPhoto I need help finding out how to delete all the photos from the iPad and have the iPhoto photos imported from iPhoto back to the iPad.
This workflow may do what you want:
1 - launch iPhoto with the Option key held down and create a new library.
2 - connect the iPad to your Mac with the new library open.
3 - import all of the photos from the iPad into the new library.
4 - select the option to delete all of the photos from the iPad.
5 - disconnect the iPad and delete the new library.
6 - launch iPhoto with the Option key held down and select your original library.
7 - assemble the photos destined for the iPad so you can easily identify them by album or event which you alread have done.
8 - launch iTunes and connect the iPad to your Mac.
9 - go to the photos section for you iPad and synce those particular albums or Events with the iPad.
That will get those specific iPad photos back into the iPad.
OT -
Need data edit,update and delete in the gridview
Hi friends,
I am facing a common problem which everyone already faced but I need to know is there anything new comes with this issue?
My problem is I want to Edit, Update and Delete data in gridview in multiple column. I can do the edit , update,cancel and delete but what I want is I dont want this button to perform this. I mean when I load data in gridview the data will show in edit mode
and when I edit any dat, the update will occur instantly in the sql server database.
Is there anything new development comes? whatever it is if its ajax or java script or something else please give me detail.
Thanks for reading my post.
RegardsQuestions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).
-
Urgent : Insert , save and Delete in the alv grid
Hi Experts,
I am having a alv grid and displaying data by fetching from backend.
i added a toolbar buttons "Insert " "Save" and "Delete".
when i click on "Insert " button the first row of the table should be empty with input fields. i want to insert data and when i click on "save" button it should update at backend.kindly let me know how to insert empty row at starting of alv grid and also how to save and delete records..
thanks in advance.Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan
Maybe you are looking for
-
Why is it that when I delete an email message from an account on my iPhone it instantly disappears from the same email account on my wife's iPhone? We both have iOS7 and have imap email accounts.
-
Trying to win my friend over to Mac but you guys are making it hard
My friend has iTunes for Windows (because I told her that an iPod was the world's greatest invention). So she installs the software and now, every time she tries to log on, she gets the "iTunes could not connect to the Music Store. The network connec
-
Hi all, I need one help. In our one schema we have design like one temp and one parmanent table. The parmanent table is partition and we are used to exchange this partition with temporary table. It was working fine but since last many days we are fac
-
How do I sync my iPhone 4S to my new Macbook Pro without erasing my iPhone?
I know this has been asked many times and I have tried a lot of the ways that people have said to do it. For example, I have my old iTunes library and i have transfeered it to my Macbook but my iPhone still does not reconize it as the "same" computer
-
Re: Satellite Z30-A with Win 8.1 - Driver update confusion
Hello, I have a question regarding driver updates. Currently, Windows Update recommends me to update the audio driver (important) and the LAN driver (optional). Toshiba Service Station, however, doesnt offer new drivers for these devices. My question