Delta deleted & not saved

Hi,
   One of the delta was deleted and is not saved.After that many deltas are being loaded.
    May I know how  a  deleted delta can be loaded again or how can I get the data of that particular load.Please describe the steps.
Regards
Vijay

Thank you srinivas....
    The delta was deleted on July 19th......After that many deltas have been
    loaded  till date.
    1.How to load that particular delta to ODS without duplicating the data( in ODS
       and Cube) .I dont know which delta has been deleted except the date(july
       19th).
    2.What should be the parameters mentioned in the repair full request.
    3.Should I choose a new Info package for loading.
  Kindly mention step by step solution.
What is repair full request & when is it used.
Points will be assigned
Thank You very much

Similar Messages

  • Restore deleted ( not saved) mailbox

    Is there any way to retrieve email that was NOT saved before deleting an account / mailbox? In order to solve a keychain problem, following instructions over the phone with Apple, I deleted both of my mailboxes, without saving the contents, and then recreated the accounts. Both accounts are now working, but all of my email history is gone, except for the the incoming for the past few days which I can also access directly from the provider's server. Any hope here?

    Basics of File Recovery
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When you delete files you erase only the directory entries, not the files themselves. However, the space occupied by the files has been returned to the system as available for storage. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Map Place Additions/Deletions Not Saved

    If I manually add or remove places on a map page in a book using the + - functionality, the changes don't get permanently saved. Does anyone know why? iPhoto remembers them OK.
    If I add a photo to a map page by dragging it into a photo field, it remembers that place and adds it to the map (using the GPS data). If I later remove that content (i.e. photo) it also refuses to save that deletion on the map. I want the map to show a selection of places on my travel route, not necessarily just the ones where I took photos.
    Both additions and deletions appear OK until I change the project or view (e.g. select Viewer, or quit the app etc.). Any thoughts?

    I have discovered what the problem is. It looks like a bug!
    Sequence of Events:
    1. I used the map template 1-Up w/Map.
    2. I then dragged a few different photos into the photo frame. This added the GPS locations from the photos to the map.
    3. I then deleted the photo frame using the Edit Layout controls.
    4. I tried to add and removed (manually) places on the map.
    5. Aperture remembered the original places from the original photo frame, but not any places I subsequently added or removed manually (using the + - functions in the list of places).
    To solve this problem I deleted the map page, then inserted a new 1-Up w/Map page, then deleted the photo frame before I did anything. Adding/removing places using the + - manual functions then worked perfectly.

  • I deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.

  • Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

    Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

    Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
    You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Why are my deleted emails saving in my 'pictures' as a PDF adobe when they should have been in my deleted email file not saved in my pictures??????

    Why are my deleted emails saving in 'my pictures' as a PDF adobe when they should have been in my deleted email file not saved
    in my pictures??????

    I deleted emails from my windows emails and when I went into my pictures there was all my recently deleted items as pdf adobe files and I cannot right click and delete. But why would my deleted emails be going to my pictures in the first place. So i think it must be in how the adobe program is set up and need to know how to change the settings so my deleted emails are not sent to my pictures.I do not know what other details you would require?

  • If I am using pages and deleted my page bu mistake how do I go back? I have not saved or deleted the page.

    If I am using pages and deleted my page by mistake how do I go back? I have not saved or deleted the page.

    You have deleted your page, but you have not deleted your page?
    Which is it?
    If you never saved it it is gone. If you saved it in Lion (OSX 10.7) with Pages 09 v4.1, there should be versions available when you mouse overv the document name at the top of the window.
    Peter

  • TS3899 accidentally deleted my "saved" emails in my Yahoo account on my iPhone not knowing it would delete them from my entire account even on my computer!  Can I get them back?

    I accidentally deleted my "saved" emails in my Yahoo account on my iPhone which I did not know would also delete them from my account on my computer.  Can I get them back?

    Did you have time machine set up? Maybe you can retrieve them from a backup.
    Oh... and if your mail provider is someone like Google, They may be sitting in your all mail folder on the server.

  • Delta deleted

    Hi,
       One of the delta was deleted and is not saved.May I know how  a  failed delta can be loaded again.Please describe the steps.
    Regards
    Vijay

    hi,
    come back to u r infopackage and schedule it again.then the system will ask u this load is already scheduled .repeate this again.then click on yes.then u r delta is rescheduled again.

  • Voice memos app not saving properly

    I am using an iphone5 running iOS7.1.1 and performing the following actions will cause Voice Memos app not saving recordings. I have sent a feedback to Apple but is wondering if anyone else is found having similar problems.
    1) Run Voice memos app and start recording
    2) At lock screen open camera app and take a picture
    3) At same lock screen delete the picture taken
    4) Lock screen will show RECORDING in progress
    5) Open Voice memos app and it will also show RECORDING in progress
    6) Save voice memo from app and the duration FROM the point of picture deleted WILL NOT be saved

    same here ... iPhone 3gs/32 gigs ram/ios 4.3.1 ...
    the app doesn't seem to work any more, and hasn't for some time:
    "buttons" are unresponsive, or they appear to respond, but don't perform their function ... erratic behavior ...
    very disappointing as this has gone on for some time ...
    We appear not to be the only ones ...
    Anyone with a solution?
    Thanks

  • Photos not saving to camera roll - iphone 5s

    I upgraded to the Iphone 5s from 4s now photos are not saved to the camera roll. Took it to the Genius bar and they restored to factory settings, same problem but they later did a "deep restore" and it worked. When they restored my data, it broke the camera roll again. The only soultion seems to be to "start over". But this is not acceptable. How can I transfer some of the app data (texts, voicemails, and select apps) to the new phone?
    Alternatively, how can I "fix" the camera roll?
    Some hints: There is a folder in DCIM folder (when viewed with the app iExplorer) called 101APPLE that contains 49 phots and 2 movies from 2010 that I CANNOT delete. Iphoto wont delete them, they wont delete from the phone UI, and they cant be delete with iExplorer - in all cases it SEEMS like they delete then pop right back in!!

    The only way photos would go to the camera roll would be if you restored the 5S from an older backup. If you transfered these photos via iTunes sync, they do not go into the camera roll.

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • Problem with photos not saving in camera roll

    When I went to take my pictures from my iphone onto my laptop today I discovered I had 2 folders, 100apple and 101apple.
    I assumed this was due to the fact that I had reached over 1000 photos, and the numbers have rolled back to 001, hence the new folder.
    I moved my photos from my iphone to my folders on laptop, then synched with itunes.
    I then tried to take another photo and it wouldn't save.
    I have restored my iphone twice, tried taking a photo each time and it has worked.
    Then a while later it is back to not saving the photos I take!
    I am at the end of my tether right now as I have spent all night trying to sort this out for it to work then undo itself!
    Help would be appreciated.
    I have tried deleting the 101apples folder but I am continually being told the folder isn't available as it has been disconnected!

    blueeyes32f,
    Have you done a restore of the iPhone, and without loading the backed up data?
    Thank you,
    Nathan C.

  • Keynote (and other iWork apps) not saving properly!

    Hi all
    I have had some strange problems over the last few weeks where I get messages telling me that iWork (usually Numbers) cannot save the files as 'something else' is using the file.  So I click 'save anyway' and I get strange files in folders, ie folder and file name is the original name plus some gooblygook.
    I have got round this by deleting the 'extras' and carrying on.  But now I am preparing a major presentation in Keynote and suddenly it is not saving graphics some of the time!
    For example I was working on a slide - and suddenly got a message that 'some problems occured' -
    Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
    Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
    I have been working with this presentation for some time and have never encountered any problems - passing between my laptop and my iPad to review and modify (mainly viewing on the iPad and editing on the MacBook).
    Any ideas what is happening?  I have a major presentation to give in just over a week and I don't want to use PowerPoint!
    Thanks
    Ian

    I've been having some success NOT using any files that have previous images or audio in them, starting from a base template and then adding audio and video and photos that are already on my hard drive, not previous Keynote files. Today I needed five slides that were part of another deck and, you guessed it, they were corrupted (or missing) when I reopened the file, only the thumbnails remaining.
    I closed the original Keynote file, placed a zip extension, then control- clicked to see the contents. The images were missing from the package. I then replaced the extension with .key and reopened in Keynote. The audio file had been there but not the images or the drawing, which I then searched for.
    Yes, delete the weird file backups and make a backup of the original in the finder. Then lock it! (You're using Mountain Lion?)
    I have a huge presentation tomorrow. I have five backups, including on a thumb drive.
    How much longer Apple?

  • Mail 3, smtp, IMAP: sent messages are not saved on server

    Hello,
    I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
    Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
    To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
    Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
    Any help is appreciated.
    rene

    Well, be stumped I did all that, but to be sure, I did it again:
    I have a lot folders with subfolders and they are shown under my account name.
    I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
    I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
    So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
    Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
    So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
    But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
    In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+
    Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
    I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

Maybe you are looking for

  • TDMS 3.0 for ERP 6.0:  step by step procedure for  TDSH6 Shell creation

    Dear All, I need to perform shell creation. I have never done this and need help with step by step instructions. I need to refresh my my development system with a TDMS shell creation from production client in production system. I am familiar with TDT

  • My iPod 4th Generation camera shutter will not open and i've restarted it and I have updated it, what should I do now?

    PLEASE HELP ME! I've had this problem August last year and I don't know what to do. I really want to use my camera because it feels like a 3rd Generation one and I'm used to using the camera:L Just please give as much information as possible! btw, if

  • J2EE addin database create fails

    During Solution manager 4.0 j2ee database create, sapinst fails during java database load: Aug 8, 2006 1:17:02 PM com.sap.inst.jload.Jload logStackTrace SEVERE: com.sap.dictionary.database.dbs.JddException: CREATE TABLE ADS_LICENSED_FORMS failed 13:1

  • Enter Ship To Party

    Dear Gurus, Can any body tell me the process if once we complete the Sale Bill (T-Code VA01) and also genrate the Excise invoice but now i want to enter the ship to party also in sale invoice. Pls guide me it is possible or not. If its possible pls w

  • -34 error when exporting from iMovie to QuickTime

    When attempting to export an edited movie using the iMovie app on my MacBook Pro into QuickTime, I receive the message "quick time export error -34" Can anyone tell me what to do?  THANK YOU!