Delta drain in R/3 for FI data sources

Hi Experts,
As part of EHP4 upgrade on the R/3 side we need to drain the delta queue in R/3.
We took the downtime in R/3 and
I triggered the delta infopackages for 0fi_gl_4, 0fi_gl_6, 0fi_aa_12, 0fi_ar_4 for 5 iterations.
Please clarify the following doubts:
1. For all the iterations I got the same number of records.
Can anyone please clarify why it fetched same no of records each time .
2. Against these data sources in RSA7, the count is not becoming '0'. As I remember it is showing 2 or 3 even after each iteration.
Please explain why these data sources are not showing '0' even after a couple of iteratioins.
Note: Postings are blocked at this time.
Need ur inputs here.
Regards,
Naveen V.

Hi,
Regarding 1, I think in system settings are done for FI datasources where it will fetch data from system time 2:00 am for each delta. This way same records are fetched again and again for whole day. You can confirm this by looking at your data in PSA.
http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/content.htm
Regarding 2, Im afraid RSA7 baffles me too. I have read that for some datasources it isnt records but LUWs that are shown. In any case if postings are stopped, then it shouldnt have created LUWs.
Edited by: Parth Kulkarni on May 3, 2011 11:47 AM

Similar Messages

Delta On CALDAY Filed for Generic Data Source

Hi,
I have enabled delta option on CALDAY Field for Generic Data Source.
I thought of giving Safety Interval for Upper Limit as 1 and Safety Interval for Upper Limit as ZERO.Would you please advise me on this, This fetches all delta data?.
Would you please advise me on this.
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
If your delta enabled field is Date then try this,
Safety Interval Upper Limit Calend. Days
Safety Interval Lower Limit 1 Calend. Days
Then test your delta, will get good result.
I created 4 GDS with this safety interval and working fine for me.
regards,
Kiran

Delta Activation for a data source

Hi All,
Thank You Very much for reading this query.
In Source System, I have enabled Delta on Calday field for a generic data source by clicking on Generic Delta Button.
For this data Source, extraction is from data base table.
Now Do I need to write any function module for this data source, as I have enabled Delta.
Would you please help me on this.
Thanks and Regards,
K.Krishna Chaitanya.

Delete duplicate request is a process chain variant, which will allow you to set the duplicate request deletion options. You need to explore those options.
Now say you have a routine in the DTPs.
DTP1 = Current Month
DTP2 = Prevoius Month
In the month of July,
DTP1 = 07/2009
DTP2 = 06/2009
On daily basis DTP1 will load data for July and DTP2 will load data for June. Now delete duplicate request will delete the previous requests loaded by each of them for the same month. Meaning delete duplicate request for DTP1, will delete the request loaded for 07/2009 and DTP2 will delete the duplicate request for 06/2009.
Now when you will be in Aug, the routine will change the selection criteria
DTP1 = 08/2009
DTP2 = 07/2009, so now DTP2 will delete teh duplicate request for 07/2009 and load the new data. Now the data changed for 06/2009 is not possible to load as you have only 2 DTPs.
For safer side, you can create 3 DTPs to take care of the last 3 months, but first test the logic for two DTPs and then go further for the third DTP.
- Danny

Delta Option for Generic Data Source

Hi ,
My requirement is Delta Option for Generic Data Source. This Data Source is getting Extracted from Function Module.
For this requirement I have followed below steps.
1) Added the Field (On which Delta gets enabled) to the extract structure by using Append Structure
2) Enabled Delta On this Filed.
3) If I try to save the Data Source, I have gone to a screen where I am able to see 4 coloumns
a) Selection
b) Hide Field
c) Inversion
d) Filed Only known in User Exit.
By default Hide Field and Filed Only known in User Exit check boxes have been checked.
Would you please tell what is the use of Filled Only known in User Exit check biox.
As My data source is getting the data buy using the Function Module, Shall I uncheck this Check Box.
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
The "FIELD" should be checked if we write any enhancement in CMOD, so that system can identify that this particular field has enhancement written to it,
But even in real time systems i usually find that even though we check the "FIELD" or not , there is no effect .
So Checking "FIELD" or not will not impose any isses .
Regards,
Krishna

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
        zzdate LIKE sy-datum,
        zzbuper LIKE t009b-poper,
        zzbdatj LIKE t009b-bdatj,
        zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
       fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date               = zzdate
*             I_MONMIT             = 00
      i_periv              = 'V3'
           IMPORTING
     e_buper              = zzbuper
     e_gjahr              = zzbdatj.
*           EXCEPTIONS
*             INPUT_FALSE          = 1
*             T009_NOTFOUND        = 2
*             T009B_NOTFOUND       = 3
*             OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

Power View in SharePoint Server - The data extension type for a data source is not valid

Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
Thanks

I am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'

Discrepency while REPLICATING META DATA (for new DATA SOURCE) in BI side.

In R/3 I have created a simple TRANSACTIONAL data store based on an INFO QUERY.
I even checked the veracity of this data store using RSA3 to see whether it extracts data. Works perfectly.
I go to BW side. Click on the SAP module under which I have created the data source, right click, select 'REPLICATE' and click on it.
( I would love to post the screen shot here, but I think I may not be able to paste BMP files here).
I will write the contents of the POP-UP that appears,
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
3. this and following 3 as DataSource (RSDS)
4. this and following 3 as 3.x DataSource (ISFS).
Well, I normally select option three as per my instructions (without knowing the real reason).
But sometimes, either for the same data source or for another data sources that I created, the same pop up will appear like this
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
Just TWO options.
And, if I select option 1, the data source does not work properly on BI side, though it worked perfectly on R/3 under TRANSACTION RSA3 and showed me data.
For some unknown reasons, if I delete the erroneous datasource on BI side and sleep overnight and comeback in the morning and replicate, the POP-UP sometimes appears with FOUR options, (Notice the word 'SOMETIMES')
Can someone explain the secret behind this?
Thanks again in advance,
Gold

3. this and following 3 as DataSource (RSDS)
That means there are total 3 new (not yet in BI) DataSources available, u wanted to replicate as 7.0 datasource (RSRS) or 3.x datasource (ISFS).
(other 2 datasources activated from RSA5, or created by other users under that SAP module)
If there is 1 new DataSource, u will get just TWO options.
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
After replication with option 1, u should activate datasource in BI, then create infopackages, transformation, DTP etc.

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

Marker update for Inventory data sources

Hi all,
why we use marker update in Cube manage for inventory data sources at the time of loading?
i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
please clear my doubt
thx

HI
(2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
(2LIS_03_BX Stock Initialization for Inventory Management--
---select the no marker update check box)
2LIS_03_UM Revaluations -
Unckeck the no marker update tab)
in the infopackege of "collaps"
Cheers

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

Hello,
On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
A data source has not been supplied for the data source DS_TraceEvents
SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
1. exec sp_executesql N'SELECT
dtb.name AS [Name]
FROM
master.sys.databases AS dtb
WHERE
(dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
2. USE [datatbaseX]
this produces the following error:
Msg 911, Level 16, State 1, Line 1
Database 'databaseX' does not exist. Make sure that the name is entered correctly.
why is the report looking for the database on my server?
thanks
Jag
Environment: MDW (Management Data Warehouse) on SQL 2008 R2

Hi Jag,
Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
Therefore I recommend that you check the status of this database by using this system view:
sys.databases. If it is not online, please execute
the following statements in a new window to make this database to be online:
USE master
GO
ALTER DATABASE <database name> SET ONLINE
GO
If anything is unclear, please let me know.
Regards,
Tom Li

ADF Service Interface: two-phase commit issue for multiple data sources

In FusionApps, For a service interface we had to use two DataSource resources (in the ejb-jar.xml),
one is ApplicationServiceDBDS for SI and the other one is ApplicationDBDS(I don’t know the exact reason why this is needed, but when running the webservice, Framework was throwing an error asking for this) After adding these two, now(while running the webservice) we’re caught up with an error saying that unable to participate in two phase commit. I think this is because we added two dataSources, if we just use one dataSource everything is working fine.
Error message from app server:
"JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source=ApplicationDB"
we have made the changes to ApplicationDB as said in the error message, but then the server is failing to start because of this.

Hi,
this is what the doc says - though not about two phase commit but transaction sharing:
"At runtime, the calling client and the ADF service may or may not participate in the same transaction, depending on the protocol used to invoke the service (either SOAP or RMI). Only the RMI protocol and a Java Transaction API (JTA) managed transaction support the option to call the service in the same transaction as the calling client."
When your application accesses a remote ADF Business Components service, each remote call is stateless, and the remote service will not participate in the same transaction as the business component that uses a service-enabled application module's service interface.
In the majority of the cases, calls to remote services will be informational in nature and will not make changes to remote objects. However, if you must use a remote service to make changes, then keep these points in mind:
An exception thrown by the remote service will cause the local transaction to fail.
If you successfully call a remote service that results in modifying data, and then subsequently your local transaction fails for any reason, then it is the responsibility of your error handling code to perform a compensating transaction against the remote service to "undo" the previous change made."
http://docs.oracle.com/cd/E23943_01/web.1111/b31974/bcextservices.htm
Frank

Delta drain in R/3 for FI data sources

Similar Messages

Maybe you are looking for